Thermoplastic Polyester(热塑性聚酯)研究综述
Thermoplastic Polyester 热塑性聚酯 - The flammability of thermoplastic polyesters and the subsequent heavy smoke and severe melt drips formed after ignition are the main obstacles hindering their widespread application. [1] The results show that thin films made of thermoplastic polyester-ether tear in the tensile test at low compressions if the hardness of the O-ring exceeds 60 Shore A. [2] 20 Fungi and bacteria utilize PHB, a thermoplastic polyester in intracellular carbon, and accumulate in the cell as an inclusion body. [3] Thermoplastic polyesters based on bio-1,6-hexanediol and terephthalic (T), furanic (F), and napthalate (N) diesters, i. [4] Bio-based thermoplastic polyesters are highly promising materials as they combine interesting thermal and physical properties and in many cases biodegradability. [5] First type of synthetic fibers was made from polyolefin based polymers, and consist HDPE and PP resin, second one was produced from thermoplastic polyesters LPET and PET. [6] The synergistic effects between CFA and aluminum phosphinate (AlPi) on flame retardancy, thermal degradation, and flammability properties of thermoplastic polyester-ether elastomer (TPEE) were investigated by limiting oxygen index (LOI), vertical burning test (UL-94), cone calorimeter test (CCT), thermogravimetric analysis (TGA), laser Raman spectroscopy (LSR) and scanning electron microscopy (SEM). [7] PETG is a thermoplastic polyester that is available as a filament for commercial desktop 3D printers. [8] Polymers types are confirmed by Fourier transform infrared (FTIR) spectroscopy as polypropylene, polystyrene, low-density polyethylene, high-density polyethylene, thermoplastic polyester and foamed polystyrene nylon. [9] Adhesive layers were applied as melt-spun fibrous webs of a thermoplastic polyester with application weights between about 20 g m–2 and 130 g m–2. [10]热塑性聚酯的可燃性以及随后在点燃后形成的浓烟和严重的熔滴是阻碍其广泛应用的主要障碍。 [1] 结果表明，如果 O 形环的硬度超过 60 Shore A，则由热塑性聚酯醚制成的薄膜在低压缩拉伸试验中会撕裂。 [2] 20 真菌和细菌利用 PHB，一种在细胞内碳中的热塑性聚酯，并作为包涵体在细胞中积累。 [3] 基于 bio-1,6-己二醇和对苯二甲酸 (T)、呋喃 (F) 和萘二酸 (N) 二酯的热塑性聚酯，即。 [4] 生物基热塑性聚酯是非常有前途的材料，因为它们结合了有趣的热和物理特性，在许多情况下还具有生物降解性。 [5] 第一种合成纤维由聚烯烃基聚合物制成，由 HDPE 和 PP 树脂组成，第二种合成纤维由热塑性聚酯 LPET 和 PET 制成。 [6] 通过极限氧指数（LOI）、垂直燃烧试验（UL-94）、锥度法研究了CFA和次膦酸铝（AlPi）对热塑性聚酯醚弹性体（TPEE）的阻燃、热降解和可燃性能的协同作用。热量计测试（CCT）、热重分析（TGA）、激光拉曼光谱（LSR）和扫描电子显微镜（SEM）。 [7] PETG 是一种热塑性聚酯，可用作商用桌面 3D 打印机的细丝。 [8] 聚合物类型通过傅里叶变换红外 (FTIR) 光谱确认为聚丙烯、聚苯乙烯、低密度聚乙烯、高密度聚乙烯、热塑性聚酯和泡沫聚苯乙烯尼龙。 [9] 粘合剂层以热塑性聚酯的熔纺纤维网形式应用，应用重量在约 20 g m-2 和 130 g m-2 之间。 [10]
Biodegradable Thermoplastic Polyester
Polyhydroxyalkanoates (PHAs) are biobased and biodegradable thermoplastic polyesters that accumulate in microorganisms (e. [1] Polylactic acid (PLA) is another type of biodegradable thermoplastic polyester derived from renewable sources which are used in bone tissue engineering and biomedical owing to its biocompatibility and biodegradability. [2] The chosen polymer is poly(lactic) acid (PLA), a biodegradable thermoplastic polyester derived from corn starch and, as one of the most common polymers in the FFF process. [3] Poly(lactic acid) (PLA) is a biodegradable thermoplastic polyester produced from renewable sources that can be easily processed to obtain articles to be used in many applications, from commodities to electronics. [4] Graphene has gained tremendous attention due to its unlimited potential in various applications while poly(lactic acid) (PLA) is a biodegradable thermoplastic polyester produced from fermenting corn starch. [5]聚羟基链烷酸酯 (PHA) 是一种生物基和可生物降解的热塑性聚酯，可在微生物（如微生物）中积累。 [1] 聚乳酸 (PLA) 是另一种源自可再生资源的可生物降解热塑性聚酯，由于其生物相容性和生物降解性，可用于骨组织工程和生物医学。 [2] 选择的聚合物是聚乳酸 (PLA)，这是一种源自玉米淀粉的可生物降解热塑性聚酯，是 FFF 工艺中最常见的聚合物之一。 [3] 聚乳酸 (PLA) 是一种可生物降解的热塑性聚酯，由可再生资源生产，可轻松加工以获得可用于从商品到电子产品的许多应用的物品。 [4] 石墨烯因其在各种应用中的无限潜力而备受关注，而聚乳酸（PLA）是一种由玉米淀粉发酵生产的可生物降解热塑性聚酯。 [5]
thermoplastic polyester elastomer 热塑性聚酯弹性体
A triazine-based charring agent (CDS) was synthesized and combined with diethyl aluminum hypophosphite (AlPi) to develop an intumescent flame retardant (IFR) system to improve thermoplastic polyester elastomer (TPEE) anti-dripping. [1] A series of sustainable and reprocessible thermoplastic polyester elastomers P(BF-PBSS)s were synthesized using dimethyl-2,5-furandicarboxylate, 1,4-butanediol, and synthetic low-molecular-weight biobased polyester (PBSS). [2] A series of thermoplastic polyester elastomer (TPEE) derivatives based on recycled polyethylene terephthalate (r-PET) and poly(tetramethylene glycol) together with differing amounts (n%, n = 0, 1, 3, and 5) of 1,6-hexanediamine (HDA) were prepared. [3] The r-PET raw material was alcoholyzed and reproduced as a thermoplastic polyester elastomer (TPEE) with different amounts (n%, n = 0, 1, 3, and 5) of 1,6-hexanediamine (HDA). [4] Specifically, we fabricated a 3D printed ear splint model via fused deposition modelling (FDM) technology by testing two materials, a thermoplastic polyester elastomer material (Z-Flex) and polycaprolactone (PCL 100). [5] This study developed breathable films by blending LDPE with thermoplastic polyester elastomer (TPEE). [6] The purpose of present study is to evaluate the antimicrobial potential of Thermoplastic Polyester Elastomer (TPE-E) incorporated with zinc oxide added with colloidal dispersion of metallic silver adsorbed on pyrogenic silica (AgNPs_ZnO). [7] The effect of a thermoplastic polyester elastomer (TPEE) on the damping properties and energy dissipation of PBT (polybutylene terephthalate) reinforced with short glass fibres is investigated in this study. [8] Long-chain branched (LCB) thermoplastic polyester elastomer (TPEE) could be controllably prepared by the two-step reaction of the linear TPEE with triglycidyl isocyanurate (TGIC) and 2,2′-bis(2-oxazoline) (2,2′-BOZ) together in different sequences to improve their rheological properties and foaming ability. [9] Thermoplastic polyester elastomer is a block copolymer comprising polyester hard segments and polyether soft segments. [10] Thermoplastic polyester elastomer (TPEE), one of thermoplastic elastomers, suitable for blending with polybutylene terephthalate (PBT), recently attracted significant attention thanks to its beneficial effects on the impact strength of fibre-reinforced PBT composites. [11]合成了一种三嗪基炭化剂 (CDS)，并与次磷酸二乙基铝 (AlPi) 结合，开发了一种膨胀型阻燃剂 (IFR) 体系，以提高热塑性聚酯弹性体 (TPEE) 的抗滴落性。 [1] 使用 2,5-呋喃二甲酸二甲酯、1,4-丁二醇和合成的低分子量生物基聚酯 (PBSS) 合成了一系列可持续和可再加工的热塑性聚酯弹性体 P(BF-PBSS)。 [2] 一系列热塑性聚酯弹性体 (TPEE) 衍生物，基于回收的聚对苯二甲酸乙二醇酯 (r-PET) 和聚 (丁二醇) 以及不同量 (n%, n=0, 1, 3, 和 5) 的 1,6-制备己二胺(HDA)。 [3] 将 r-PET 原料醇解并复制为热塑性聚酯弹性体 (TPEE)，其中含有不同量 (n%, n = 0, 1, 3, 和 5) 的 1,6-己二胺 (HDA)。 [4] 具体来说，我们通过测试热塑性聚酯弹性体材料 (Z-Flex) 和聚己内酯 (PCL 100) 两种材料，通过熔融沉积建模 (FDM) 技术制造了一个 3D 打印耳夹板模型。 [5] 本研究通过将 LDPE 与热塑性聚酯弹性体 (TPEE) 混合来开发透气薄膜。 [6] 本研究的目的是评估热塑性聚酯弹性体 (TPE-E) 的抗菌潜力，该热塑性聚酯弹性体 (TPE-E) 添加了氧化锌，并添加了吸附在气相二氧化硅 (AgNPs_ZnO) 上的金属银胶体分散体。 [7] 本研究研究了热塑性聚酯弹性体 (TPEE) 对用短玻璃纤维增强的 PBT（聚对苯二甲酸丁二醇酯）的阻尼性能和能量耗散的影响。 [8] 长链支化 (LCB) 热塑性聚酯弹性体 (TPEE) 可以通过线性 TPEE 与异氰脲酸三缩水甘油酯 (TGIC) 和 2,2'-双(2-恶唑啉) (2,2' -BOZ) 以不同的顺序组合在一起，以提高其流变性能和发泡能力。 [9] 热塑性聚酯弹性体是包含聚酯硬链段和聚醚软链段的嵌段共聚物。 [10] 热塑性聚酯弹性体 (TPEE) 是热塑性弹性体之一，适合与聚对苯二甲酸丁二醇酯 (PBT) 共混，由于其对纤维增强 PBT 复合材料的冲击强度的有益影响，最近引起了广泛关注。 [11]
thermoplastic polyester derived
Polylactic acid (PLA) is another type of biodegradable thermoplastic polyester derived from renewable sources which are used in bone tissue engineering and biomedical owing to its biocompatibility and biodegradability. [1] The chosen polymer is poly(lactic) acid (PLA), a biodegradable thermoplastic polyester derived from corn starch and, as one of the most common polymers in the FFF process. [2]聚乳酸 (PLA) 是另一种源自可再生资源的可生物降解热塑性聚酯，由于其生物相容性和生物降解性，可用于骨组织工程和生物医学。 [1] 选择的聚合物是聚乳酸 (PLA)，这是一种源自玉米淀粉的可生物降解热塑性聚酯，是 FFF 工艺中最常见的聚合物之一。 [2]
thermoplastic polyester produced
Poly(lactic acid) (PLA) is a biodegradable thermoplastic polyester produced from renewable sources that can be easily processed to obtain articles to be used in many applications, from commodities to electronics. [1] Graphene has gained tremendous attention due to its unlimited potential in various applications while poly(lactic acid) (PLA) is a biodegradable thermoplastic polyester produced from fermenting corn starch. [2]聚乳酸 (PLA) 是一种可生物降解的热塑性聚酯，由可再生资源生产，可轻松加工以获得可用于从商品到电子产品的许多应用的物品。 [1] 石墨烯因其在各种应用中的无限潜力而备受关注，而聚乳酸（PLA）是一种由玉米淀粉发酵生产的可生物降解热塑性聚酯。 [2]