Situ Laser(Situ Laser)研究综述
Situ Laser Situ Laser - Biotite and white mica from this intrusion as well as from the mylonitic shear zone yield 40Ar/39Ar ages of 17-18 Ma independent of the used techniques (in-situ laser ablation, single-grain total fusion, single-grain step heating, and multi-grain step heating). [1] We present the minor-trace element contents in sphalerite and pyrite from drill core samples of four deposits (Banskhapa, Jangaldehri, Biskhan, and Bhuyari), analyzed by electron probe microanalyzer (EPMA) and in-situ laser ablation inductively coupled plasma mass spectroscopy (LA-ICP-MS) for determining ore-forming temperature, ore genesis and exploration prospectivity. [2] Unlike in situ laser direct growth methods, our method separates the laser-scanned process from the selenization process, which avoids the long time of point-by-point selenization of MoS2 by laser, making the efficiency of the synthesis greatly improved. [3] Here we present results from field observation and geochemical studies of pyrite using electron probe microanalysis (EPMA), in-situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) and femtosecond laser ablation coupled multi-collector inductively coupled plasma mass spectrometry (fsLA-MC-ICP-MS) analyses. [4] In situ laser measurements exhibit the radial expansion of ODS steel tubes before failure. [5] In order to change the cooling rate of weld pool, in-situ laser post-heating was irradiated behind the weld pool during gas tungsten arc welding in a U-type hot cracking test. [6] In situ laser ablation inductively coupled plasma mass spectrometry trace-element analyses show that the three colour zones display variable trace-element compositions. [7] Chemical composition of magmatic biotite was determined by EPMA and in situ laser ablation ICP-MS for different phases within the MDG. [8] We previously described a transfemoral antegrade in situ laser fenestration technique (in situ fenestrated endovascular abdominal aortic aneurysm repair) for ruptured thoracoabdominal aortic aneurysms. [9] The present work reports the in situ laser irradiated changes in the optical properties of As50Se40Sb10 thin films. [10] An injectable pluronic F127/hyaluronic acid (HA)-based hydrogel embedded with manganese dioxide (BM) nanoparticles and TLR7 agonist resiquimod (R848) (BAGEL-R848), is synthesized to induce in situ laser-assisted gelation of the hydrogel and achieve desired ablation temperatures at a low laser-exposure time. [11] U-Pb dating of cassiterite and zircon from the Yazov granite (Transbaikalia region, Eastern Siberia, Russia) and cassiterite from spatially associated tin mineralization in the Tuyukan ore district in the Tonod uplift was conducted using in situ laser ablation inductively coupled plasma mass spectrometry. [12] In this study, we assessed early and mid-term outcomes of total endovascular arch repair combined with a new method of in situ laser fenestration. [13] The manifestation of these different states is exemplified by combining global torque measurements and local in situ laser induced fluorescence microscopy imaging. [14] Described is a hybrid metal additive manufacturing (AM) method that integrates in situ laser shock peen (LSP) forming with laser powder bed fusion (PBF) to mitigate vertical distortions during part builds. [15] We performed in situ laser-ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) U-Pb geochronology on apatite and zircon, both of which crystallized as primary phases. [16] We utilized in situ laser-heating within a TEM to reveal how nanomaterials transform from amorphous precursors, and used electron spectroscopy to characterize the optical properties of these nanostructures in situ and in real time. [17] Herein, TiB composite coatings were successfully fabricated on the surface of a Ti–6Al–4V alloy with Ti/B/CeO2 powders by in situ laser cladding technology, and the microstructure and corrosion resistance were investigated. [18] OBJECTIVE To summarize available in-situ laser fenestration (ISLF) literature, including experimental studies with their subsequent recommendations regarding optimal fenestration technique and fabric; as well as the short and mid-term results of clinical studies. [19] Here, we utilize in situ laser-heating within a transmission electron microscope (TEM) to understand the stages of crystallization and coalescence of amorphous precursors deposited by pulsed laser deposition (PLD) as they are guided by 2D crystalline substrates into van der Waals (vdW) epitaxial heterostructures. [20] The findings reveal an enhancement in both the reduction of graphene oxide sheets and the nucleation and growth of the Au nanoparticles during the in situ laser treatment. [21] 9 Ma), offers a well-established geological framework to understand the strengths and limitations of U-Pb LA-ICPMS (in situ Laser Ablation-Inductively Coupled Plasma Mass Spectrometry) geochronology as chronostratigraphic tool for lacustrine (and more broadly continental) carbonates. [22] In this work, a method for experimentally determining a local characteristic velocity, c∗ , is presented for purposes of analyzing rocket combustion progress based on in-situ laser absorption spectroscopy measurements of temperature and gas composition. [23] The purpose of this study is to investigate the applicability of in-situ laser induced breakdown spectroscopy (LIBS) for deuterium retention measurements in tungsten coatings with different morphology and oxygen content. [24] In this study, the (FeMnCrNiCo + 20%TiC) laser cladding layer was re-treated through multiple-pass in-situ laser remelting. [25] Here we report in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses of Cr, Co, Ni, Cu, Zn, Ga, Ge, As, Mo, Ag, Cd, In, Sn, Sb, Te, Tl, Pb, and Bi in sulfides and silicates in thirteen rocks from six exhumed high-pressure (HP) terranes worldwide. [26] In this study, we performed in situ laser-ablation ICP-MS U Pb dating and trace element characterization of calcites collected from borehole cores within one of the main fault zones in the Central Uplift of the Tarim Basin. [27] In this work, in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) analysis with non-matrix-matched calibration is proposed for determining the composition of spodumene samples. [28] Cells over matrices modified with the photoactivatable chelator trivalent nitrilotriacetic acid were illuminated by in situ laser-scanning microscopy. [29] Through a series of high-pressure x-ray diffraction experiments combined with in situ laser heating, we explore the pressure-temperature phase diagram of germanium (Ge) at pressures up to 110 GPa and temperatures exceeding 3000 K. [30] The samples were analysed using in-situ laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) to identify the trace element characteristics of chlorite. [31] Both electron probe micro-analysis and in situ laser ablation–inductively coupled plasma–mass spectrometry analysis of different types of molybdenite show that high Re concentrations are due to isovalent Re substitution for Mo in molybdenite. [32] To explore the effect of laser scanning speed on the microstructure and performance of Cr3C2-NiCr cermet layers fabricated by in-situ laser cladding, Cr3C2-NiCr cermet layers were laser cladded from Ni/Cr/Graphite (25:65:10 wt. [33] Monazite and rutile occurring in hydrothermally altered W mineralizations, in the Echassieres district of the French Massif Central (FMC), were dated by U-Pb isotopic systematics using in-situ Laser ablation-inductively coupled plasma–quadrupole mass spectrometry (LA-ICP-MS). [34] However, in situ laser ablation inductively coupled plasma mass spectrometry results show that Au concentrations in pyrite vary from below the detection limit to 41 ppm and are positively correlated with Cu (r = 0. [35] Detailed in situ laser ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS) is a powerful technique that produces the robust trace element and sulfur isotope databases from paragenetically and texturally well-characterized pyrite from the Raja prospect. [36] In situ laser-induced heating of the SmBPN glasses without and with preheating was characterized by an infrared thermal camera. [37] METHODS This study retrospectively analysed 43 patients with acute aortic dissection involving Zone 0 who received in situ laser fenestrated thoracic endovascular aortic repair with distal tapered RCS from January 2015 to February 2019. [38] In this work, the efficacy of two in situ laser remelting approaches on the elimination of pores during LPBF of a titanium alloy Ti-6. [39] In situ laser fenestration (ISLF) is currently used to reconstruct the aortic major branches during thoracic endovascular aortic repair (TEVAR). [40] This paper presents the results of a limited pilot study which aimed to test the application of petrographic and in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) analytical techniques to the sourcing of transported artefacts from three Pilbara quarried outcrops to two non-quarried open surface sites. [41] We conducted in situ laser ablation multi–collector inductively coupled plasma mass spectrometry (LA–MC–ICP–MS) sulfur (S) isotope analyses of different stages of pyrite and arsenopyrite to improve our understanding of the sources and genesis of the deposits. [42] , pyrite), the application of in situ laser ablation-inductively coupled plasma-mass spectroscopy (LA-ICP-MS) data to the differentiation of pre-ore and hydrothermal carbonates remains relatively untested. [43] To increase the measurement rate and reduce the ranging error of real-time in-situ laser ranging in full-waveform light detection and ranging (LiDAR), a back propagation (BP) neural network-based online ranging method (BPO) implemented on FPGA is proposed. [44] This work describes improvements made to the in-situ laser induced fluorescence SO2 instrument as originally described in Rollins et al. [45] In this study, we present preliminary bulk rock geochemical and in-situ laser ablation (LA) -ICP-MS analyses on Al- and Fe-oxy-hydroxides of Provence (Les Baux-de-Provence) and Languedoc (Villeveyrac, Loupian) bauxites, with the aim of evaluating the concentrations of rare earth elements (REEs) and their deportment in these minerals. [46] Short-lived metal species are prepared through in situ laser-assisted synthesis and cooled by supersonic expansions. [47] To realize an actual in-situ Laser-Induced Incandescence (LII) sensor system for measurements in an exhaust pipe of a combustion engine, suitable components for such an application were chosen, integrated in a first prototype and tested. [48] In situ laser probe Ar-Ar age constraints (with textural control) on recrystallized phengites from the HP/UHP unit cluster within 315 to 325 Ma. [49] The ex-situ laser modification of the As-S films leads to appearance of a photoluminescence emission, and its maximum position shifts from 1. [50]来自该侵入体以及糜棱质剪切带的黑云母和白云母产量 <sup>40</sup>Ar/<sup>39</sup>Ar 年龄为 17-18 Ma，与所使用的技术无关（原位激光烧蚀、单晶粒全熔、单晶粒阶梯加热和多晶粒阶梯加热）。 [1] 我们展示了四个矿床（Banskhapa、Jangaldehri、Biskhan 和 Bhuyari）的钻芯样品中闪锌矿和黄铁矿中的微量元素含量，通过电子探针显微分析仪 (EPMA) 和原位激光烧蚀电感耦合等离子体质谱仪进行了分析。 LA-ICP-MS）用于确定成矿温度、成矿和勘探前景。 [2] 与原位激光直接生长方法不同，我们的方法将激光扫描过程与硒化过程分开，避免了激光逐点硒化MoS2的时间过长，大大提高了合成效率。 [3] 在这里，我们展示了使用电子探针显微分析 (EPMA)、原位激光烧蚀-电感耦合等离子体质谱法 (LA-ICP-MS) 和飞秒激光烧蚀耦合多集电极电感耦合等离子体对黄铁矿进行现场观察和地球化学研究的结果质谱 (fsLA-MC-ICP-MS) 分析。 [4] 原位激光测量显示 ODS 钢管在失效前的径向膨胀。 [5] 为了改变熔池的冷却速度，在U型热裂试验中，钨极气体保护焊在熔池后面进行原位激光后加热。 [6] 原位激光烧蚀电感耦合等离子体质谱微量元素分析表明，三个颜色区域显示出可变的微量元素组成。 [7] 岩浆黑云母的化学成分通过 EPMA 和原位激光烧蚀 ICP-MS 测定 MDG 内的不同相。 [8] 我们之前描述了用于破裂的胸腹主动脉瘤的经股前行原位激光开窗技术（原位开窗血管内腹主动脉瘤修复）。 [9] 目前的工作报告了原位激光辐照对 As50Se40Sb10 薄膜光学性质的变化。 [10] 合成了一种可注射的基于 Pluronic F127/透明质酸 (HA) 的水凝胶，其中嵌入了二氧化锰 (BM) 纳米粒子和 TLR7 激动剂雷西莫德 (R848) (BAGEL-R848)，以诱导水凝胶的原位激光辅助凝胶化并达到预期的效果在低激光曝光时间的烧蚀温度。 [11] 使用原位激光烧蚀电感耦合等离子体质谱法对来自 Yazov 花岗岩（俄罗斯东西伯利亚外贝加尔地区）的锡石和锆石以及来自 Tonod 隆起 Tuyukan 矿区空间伴生锡矿化的锡石进行 U-Pb 测年。 [12] 在这项研究中，我们评估了全血管内弓修复结合原位激光开窗新方法的早期和中期结果。 [13] 这些不同状态的表现通过结合全局扭矩测量和局部原位激光诱导荧光显微镜成像来举例说明。 [14] 描述了一种混合金属增材制造 (AM) 方法，该方法将原位激光冲击喷丸 (LSP) 成形与激光粉末床熔合 (PBF) 相结合，以减轻零件制造过程中的垂直变形。 [15] 我们对磷灰石和锆石进行了原位激光烧蚀-电感耦合等离子体-质谱法 (LA-ICP-MS) U-Pb 地质年代学，这两种材料都作为初级相结晶。 [16] 我们利用 TEM 中的原位激光加热来揭示纳米材料如何从无定形前体转变，并使用电子光谱来原位和实时表征这些纳米结构的光学特性。 [17] 在此，采用原位激光熔覆技术在Ti/B/CeO2粉末的Ti-6Al-4V合金表面成功制备了TiB复合涂层，并对其微观结构和耐腐蚀性进行了研究。 [18] 客观的 总结现有的原位激光开窗 (ISLF) 文献，包括实验研究及其对最佳开窗技术和织物的后续建议；以及临床研究的短期和中期结果。 [19] 在这里，我们利用透射电子显微镜 (TEM) 中的原位激光加热来了解通过脉冲激光沉积 (PLD) 沉积的无定形前体的结晶和聚结阶段，因为它们被二维晶体基板引导成范德华 (vdW) ) 外延异质结构。 [20] 研究结果揭示了在原位激光处理过程中，氧化石墨烯片的还原以及金纳米颗粒的成核和生长都得到了增强。 [21] 9 Ma），提供了一个完善的地质框架，以了解 U-Pb LA-ICPMS（原位激光烧蚀-电感耦合等离子体质谱）地质年代学作为湖相（以及更广泛的大陆）碳酸盐的年代地层学工具的优势和局限性。 [22] 在这项工作中，提出了一种通过实验确定局部特征速度 c* 的方法，用于基于温度和气体成分的原位激光吸收光谱测量分析火箭燃烧进程。 [23] 本研究的目的是研究原位激光诱导击穿光谱 (LIBS) 在不同形态和氧含量的钨涂层中氘保留测量的适用性。 [24] 本研究通过多道原位激光重熔对（FeMnCrNiCo + 20%TiC）激光熔覆层进行再处理。 [25] 在这里，我们报告了 Cr、Co、Ni、Cu、Zn、Ga、Ge、As、Mo、Ag、Cd、In、Sn、Sb、Te 的原位激光烧蚀电感耦合等离子体质谱 (LA-ICP-MS) 分析、Tl、Pb 和 Bi 在全球 6 个挖掘出的高压 (HP) 地体的 13 块岩石中的硫化物和硅酸盐中。 [26] 在这项研究中，我们对从塔里木盆地中央隆起的一个主要断裂带内的钻孔岩心采集的方解石进行了原位激光烧蚀 ICP-MS U Pb 测年和微量元素表征。 [27] 在这项工作中，提出了采用非基质匹配校准的原位激光烧蚀电感耦合等离子体质谱 (LA-ICPMS) 分析来确定锂辉石样品的成分。 [28] 通过原位激光扫描显微镜照射用可光活化螯合剂三价次氮基三乙酸修饰的基质上的细胞。 [29] 通过一系列与原位激光加热相结合的高压 X 射线衍射实验，我们探索了在高达 110 GPa 的压力和超过 3000 K 的温度下锗 (Ge) 的压力-温度相图。 [30] 使用原位激光烧蚀电感耦合等离子体质谱 (LA-ICP-MS) 对样品进行分析，以鉴定绿泥石的微量元素特征。 [31] 不同类型辉钼矿的电子探针显微分析和原位激光烧蚀 - 电感耦合等离子体 - 质谱分析表明，高 Re 浓度是由于等价 Re 取代了辉钼矿中的 Mo。 [32] 为了探索激光扫描速度对原位激光熔覆制备的 Cr3C2-NiCr 金属陶瓷层的微观结构和性能的影响，采用 Ni/Cr/Graphite（25:65:10 wt. [33] 独居石和金红石出现在法国地块中央 (FMC) 的 Echassieres 地区的热液蚀变 W 矿化中，使用原位激光烧蚀-电感耦合等离子体-四极杆质谱仪 (LA-ICP-多发性硬化症）。 [34] 然而，原位激光烧蚀电感耦合等离子体质谱结果表明，黄铁矿中的 Au 浓度从低于检测限到 41 ppm 不等，并且与 Cu 呈正相关（r = 0. [35] 详细的原位激光烧蚀电感耦合等离子体质谱法 (LA-ICP-MS) 是一种强大的技术，可以从 Raja 远景区的共生和结构特征良好的黄铁矿中生成强大的微量元素和硫同位素数据库。 [36] 用红外热像仪表征了在没有和有预热的情况下对 SmBPN 玻璃进行的原位激光诱导加热。 [37] 方法 本研究回顾性分析了 2015 年 1 月至 2019 年 2 月 43 例累及 0 区的急性主动脉夹层患者，他们接受了原位激光开孔胸腔内主动脉远端锥形 RCS 修复术。 [38] 在这项工作中，两种原位激光重熔方法在钛合金 Ti-6 LPBF 过程中消除气孔的效果。 [39] 原位激光开窗术 (ISLF) 目前用于在胸腔内主动脉修复 (TEVAR) 期间重建主动脉主要分支。 [40] 本文介绍了一项有限的试点研究的结果，该研究旨在测试岩相和原位激光烧蚀电感耦合等离子体质谱 (LA-ICPMS) 分析技术在从三个皮尔巴拉采石露头到两个非采石场露天场地。 [41] 我们对不同阶段的黄铁矿和毒砂进行了原位激光烧蚀多收集器电感耦合等离子体质谱 (LA-MC-ICP-MS) 硫 (S) 同位素分析，以提高我们对矿床来源和成因的了解。 [42] ，黄铁矿），原位激光烧蚀电感耦合等离子体质谱（LA-ICP-MS）数据在区分前矿石和热液碳酸盐中的应用仍然相对未经测试。 [43] 为提高全波形光探测与测距（LiDAR）中实时原位激光测距的测量速率并降低测距误差，在FPGA上实现了一种基于反向传播（BP）神经网络的在线测距方法（BPO）被提议。 [44] 这项工作描述了对原位激光诱导荧光 SO2 仪器的改进，如最初在 Rollins 等人中所述。 [45] nan [46] nan [47] nan [48] nan [49] nan [50]
ablation inductively coupled
We present the minor-trace element contents in sphalerite and pyrite from drill core samples of four deposits (Banskhapa, Jangaldehri, Biskhan, and Bhuyari), analyzed by electron probe microanalyzer (EPMA) and in-situ laser ablation inductively coupled plasma mass spectroscopy (LA-ICP-MS) for determining ore-forming temperature, ore genesis and exploration prospectivity. [1] Here we present results from field observation and geochemical studies of pyrite using electron probe microanalysis (EPMA), in-situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) and femtosecond laser ablation coupled multi-collector inductively coupled plasma mass spectrometry (fsLA-MC-ICP-MS) analyses. [2] In situ laser ablation inductively coupled plasma mass spectrometry trace-element analyses show that the three colour zones display variable trace-element compositions. [3] U-Pb dating of cassiterite and zircon from the Yazov granite (Transbaikalia region, Eastern Siberia, Russia) and cassiterite from spatially associated tin mineralization in the Tuyukan ore district in the Tonod uplift was conducted using in situ laser ablation inductively coupled plasma mass spectrometry. [4] 9 Ma), offers a well-established geological framework to understand the strengths and limitations of U-Pb LA-ICPMS (in situ Laser Ablation-Inductively Coupled Plasma Mass Spectrometry) geochronology as chronostratigraphic tool for lacustrine (and more broadly continental) carbonates. [5] Here we report in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses of Cr, Co, Ni, Cu, Zn, Ga, Ge, As, Mo, Ag, Cd, In, Sn, Sb, Te, Tl, Pb, and Bi in sulfides and silicates in thirteen rocks from six exhumed high-pressure (HP) terranes worldwide. [6] In this work, in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) analysis with non-matrix-matched calibration is proposed for determining the composition of spodumene samples. [7] The samples were analysed using in-situ laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) to identify the trace element characteristics of chlorite. [8] Monazite and rutile occurring in hydrothermally altered W mineralizations, in the Echassieres district of the French Massif Central (FMC), were dated by U-Pb isotopic systematics using in-situ Laser ablation-inductively coupled plasma–quadrupole mass spectrometry (LA-ICP-MS). [9] However, in situ laser ablation inductively coupled plasma mass spectrometry results show that Au concentrations in pyrite vary from below the detection limit to 41 ppm and are positively correlated with Cu (r = 0. [10] Detailed in situ laser ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS) is a powerful technique that produces the robust trace element and sulfur isotope databases from paragenetically and texturally well-characterized pyrite from the Raja prospect. [11] This paper presents the results of a limited pilot study which aimed to test the application of petrographic and in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) analytical techniques to the sourcing of transported artefacts from three Pilbara quarried outcrops to two non-quarried open surface sites. [12] , pyrite), the application of in situ laser ablation-inductively coupled plasma-mass spectroscopy (LA-ICP-MS) data to the differentiation of pre-ore and hydrothermal carbonates remains relatively untested. [13] In this study, we use in situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analyses of zircon and monazite crystals to constrain the relationship between Zr and REE mineralization at Baerzhe. [14] In situ Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) U-Pb zircon geochronology showed the ages at about 290–330 Ma linked to the Hercynian orogeny in IVC. [15]我们展示了四个矿床（Banskhapa、Jangaldehri、Biskhan 和 Bhuyari）的钻芯样品中闪锌矿和黄铁矿中的微量元素含量，通过电子探针显微分析仪 (EPMA) 和原位激光烧蚀电感耦合等离子体质谱仪进行了分析。 LA-ICP-MS）用于确定成矿温度、成矿和勘探前景。 [1] 在这里，我们展示了使用电子探针显微分析 (EPMA)、原位激光烧蚀-电感耦合等离子体质谱法 (LA-ICP-MS) 和飞秒激光烧蚀耦合多集电极电感耦合等离子体对黄铁矿进行现场观察和地球化学研究的结果质谱 (fsLA-MC-ICP-MS) 分析。 [2] 原位激光烧蚀电感耦合等离子体质谱微量元素分析表明，三个颜色区域显示出可变的微量元素组成。 [3] 使用原位激光烧蚀电感耦合等离子体质谱法对来自 Yazov 花岗岩（俄罗斯东西伯利亚外贝加尔地区）的锡石和锆石以及来自 Tonod 隆起 Tuyukan 矿区空间伴生锡矿化的锡石进行 U-Pb 测年。 [4] 9 Ma），提供了一个完善的地质框架，以了解 U-Pb LA-ICPMS（原位激光烧蚀-电感耦合等离子体质谱）地质年代学作为湖相（以及更广泛的大陆）碳酸盐的年代地层学工具的优势和局限性。 [5] 在这里，我们报告了 Cr、Co、Ni、Cu、Zn、Ga、Ge、As、Mo、Ag、Cd、In、Sn、Sb、Te 的原位激光烧蚀电感耦合等离子体质谱 (LA-ICP-MS) 分析、Tl、Pb 和 Bi 在全球 6 个挖掘出的高压 (HP) 地体的 13 块岩石中的硫化物和硅酸盐中。 [6] 在这项工作中，提出了采用非基质匹配校准的原位激光烧蚀电感耦合等离子体质谱 (LA-ICPMS) 分析来确定锂辉石样品的成分。 [7] 使用原位激光烧蚀电感耦合等离子体质谱 (LA-ICP-MS) 对样品进行分析，以鉴定绿泥石的微量元素特征。 [8] 独居石和金红石出现在法国地块中央 (FMC) 的 Echassieres 地区的热液蚀变 W 矿化中，使用原位激光烧蚀-电感耦合等离子体-四极杆质谱仪 (LA-ICP-多发性硬化症）。 [9] 然而，原位激光烧蚀电感耦合等离子体质谱结果表明，黄铁矿中的 Au 浓度从低于检测限到 41 ppm 不等，并且与 Cu 呈正相关（r = 0. [10] 详细的原位激光烧蚀电感耦合等离子体质谱法 (LA-ICP-MS) 是一种强大的技术，可以从 Raja 远景区的共生和结构特征良好的黄铁矿中生成强大的微量元素和硫同位素数据库。 [11] 本文介绍了一项有限的试点研究的结果，该研究旨在测试岩相和原位激光烧蚀电感耦合等离子体质谱 (LA-ICPMS) 分析技术在从三个皮尔巴拉采石露头到两个非采石场露天场地。 [12] ，黄铁矿），原位激光烧蚀电感耦合等离子体质谱（LA-ICP-MS）数据在区分前矿石和热液碳酸盐中的应用仍然相对未经测试。 [13] nan [14] nan [15]
inductively coupled plasma
We conducted in situ laser ablation multi–collector inductively coupled plasma mass spectrometry (LA–MC–ICP–MS) sulfur (S) isotope analyses of different stages of pyrite and arsenopyrite to improve our understanding of the sources and genesis of the deposits. [1]我们对不同阶段的黄铁矿和毒砂进行了原位激光烧蚀多收集器电感耦合等离子体质谱 (LA-MC-ICP-MS) 硫 (S) 同位素分析，以提高我们对矿床来源和成因的了解。 [1]
situ laser ablation
Biotite and white mica from this intrusion as well as from the mylonitic shear zone yield 40Ar/39Ar ages of 17-18 Ma independent of the used techniques (in-situ laser ablation, single-grain total fusion, single-grain step heating, and multi-grain step heating). [1] We present the minor-trace element contents in sphalerite and pyrite from drill core samples of four deposits (Banskhapa, Jangaldehri, Biskhan, and Bhuyari), analyzed by electron probe microanalyzer (EPMA) and in-situ laser ablation inductively coupled plasma mass spectroscopy (LA-ICP-MS) for determining ore-forming temperature, ore genesis and exploration prospectivity. [2] Here we present results from field observation and geochemical studies of pyrite using electron probe microanalysis (EPMA), in-situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) and femtosecond laser ablation coupled multi-collector inductively coupled plasma mass spectrometry (fsLA-MC-ICP-MS) analyses. [3] In situ laser ablation inductively coupled plasma mass spectrometry trace-element analyses show that the three colour zones display variable trace-element compositions. [4] Chemical composition of magmatic biotite was determined by EPMA and in situ laser ablation ICP-MS for different phases within the MDG. [5] U-Pb dating of cassiterite and zircon from the Yazov granite (Transbaikalia region, Eastern Siberia, Russia) and cassiterite from spatially associated tin mineralization in the Tuyukan ore district in the Tonod uplift was conducted using in situ laser ablation inductively coupled plasma mass spectrometry. [6] 9 Ma), offers a well-established geological framework to understand the strengths and limitations of U-Pb LA-ICPMS (in situ Laser Ablation-Inductively Coupled Plasma Mass Spectrometry) geochronology as chronostratigraphic tool for lacustrine (and more broadly continental) carbonates. [7] Here we report in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses of Cr, Co, Ni, Cu, Zn, Ga, Ge, As, Mo, Ag, Cd, In, Sn, Sb, Te, Tl, Pb, and Bi in sulfides and silicates in thirteen rocks from six exhumed high-pressure (HP) terranes worldwide. [8] In this work, in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) analysis with non-matrix-matched calibration is proposed for determining the composition of spodumene samples. [9] The samples were analysed using in-situ laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) to identify the trace element characteristics of chlorite. [10] Both electron probe micro-analysis and in situ laser ablation–inductively coupled plasma–mass spectrometry analysis of different types of molybdenite show that high Re concentrations are due to isovalent Re substitution for Mo in molybdenite. [11] Monazite and rutile occurring in hydrothermally altered W mineralizations, in the Echassieres district of the French Massif Central (FMC), were dated by U-Pb isotopic systematics using in-situ Laser ablation-inductively coupled plasma–quadrupole mass spectrometry (LA-ICP-MS). [12] However, in situ laser ablation inductively coupled plasma mass spectrometry results show that Au concentrations in pyrite vary from below the detection limit to 41 ppm and are positively correlated with Cu (r = 0. [13] Detailed in situ laser ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS) is a powerful technique that produces the robust trace element and sulfur isotope databases from paragenetically and texturally well-characterized pyrite from the Raja prospect. [14] This paper presents the results of a limited pilot study which aimed to test the application of petrographic and in situ laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) analytical techniques to the sourcing of transported artefacts from three Pilbara quarried outcrops to two non-quarried open surface sites. [15] We conducted in situ laser ablation multi–collector inductively coupled plasma mass spectrometry (LA–MC–ICP–MS) sulfur (S) isotope analyses of different stages of pyrite and arsenopyrite to improve our understanding of the sources and genesis of the deposits. [16] , pyrite), the application of in situ laser ablation-inductively coupled plasma-mass spectroscopy (LA-ICP-MS) data to the differentiation of pre-ore and hydrothermal carbonates remains relatively untested. [17] In this study, we present preliminary bulk rock geochemical and in-situ laser ablation (LA) -ICP-MS analyses on Al- and Fe-oxy-hydroxides of Provence (Les Baux-de-Provence) and Languedoc (Villeveyrac, Loupian) bauxites, with the aim of evaluating the concentrations of rare earth elements (REEs) and their deportment in these minerals. [18] In this study, we use in situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analyses of zircon and monazite crystals to constrain the relationship between Zr and REE mineralization at Baerzhe. [19] First, we use in situ laser ablation and conventional microsampling techniques to understand time-averaging of environmental signals in intra-tooth isotope profiles in modern feral horse teeth (n = 5) from Mongolia, where there is a large seasonal gradient in the oxygen isotopic composition of precipitation. [20] Therefore, we utilized in situ laser ablation electrospray ionization mass spectrometry (LAESI-MS) to sample only those root segments at or adjacent to the sites of bacterial colonization. [21] In situ Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) U-Pb zircon geochronology showed the ages at about 290–330 Ma linked to the Hercynian orogeny in IVC. [22]来自该侵入体以及糜棱质剪切带的黑云母和白云母产量 <sup>40</sup>Ar/<sup>39</sup>Ar 年龄为 17-18 Ma，与所使用的技术无关（原位激光烧蚀、单晶粒全熔、单晶粒阶梯加热和多晶粒阶梯加热）。 [1] 我们展示了四个矿床（Banskhapa、Jangaldehri、Biskhan 和 Bhuyari）的钻芯样品中闪锌矿和黄铁矿中的微量元素含量，通过电子探针显微分析仪 (EPMA) 和原位激光烧蚀电感耦合等离子体质谱仪进行了分析。 LA-ICP-MS）用于确定成矿温度、成矿和勘探前景。 [2] 在这里，我们展示了使用电子探针显微分析 (EPMA)、原位激光烧蚀-电感耦合等离子体质谱法 (LA-ICP-MS) 和飞秒激光烧蚀耦合多集电极电感耦合等离子体对黄铁矿进行现场观察和地球化学研究的结果质谱 (fsLA-MC-ICP-MS) 分析。 [3] 原位激光烧蚀电感耦合等离子体质谱微量元素分析表明，三个颜色区域显示出可变的微量元素组成。 [4] 岩浆黑云母的化学成分通过 EPMA 和原位激光烧蚀 ICP-MS 测定 MDG 内的不同相。 [5] 使用原位激光烧蚀电感耦合等离子体质谱法对来自 Yazov 花岗岩（俄罗斯东西伯利亚外贝加尔地区）的锡石和锆石以及来自 Tonod 隆起 Tuyukan 矿区空间伴生锡矿化的锡石进行 U-Pb 测年。 [6] 9 Ma），提供了一个完善的地质框架，以了解 U-Pb LA-ICPMS（原位激光烧蚀-电感耦合等离子体质谱）地质年代学作为湖相（以及更广泛的大陆）碳酸盐的年代地层学工具的优势和局限性。 [7] 在这里，我们报告了 Cr、Co、Ni、Cu、Zn、Ga、Ge、As、Mo、Ag、Cd、In、Sn、Sb、Te 的原位激光烧蚀电感耦合等离子体质谱 (LA-ICP-MS) 分析、Tl、Pb 和 Bi 在全球 6 个挖掘出的高压 (HP) 地体的 13 块岩石中的硫化物和硅酸盐中。 [8] 在这项工作中，提出了采用非基质匹配校准的原位激光烧蚀电感耦合等离子体质谱 (LA-ICPMS) 分析来确定锂辉石样品的成分。 [9] 使用原位激光烧蚀电感耦合等离子体质谱 (LA-ICP-MS) 对样品进行分析，以鉴定绿泥石的微量元素特征。 [10] 不同类型辉钼矿的电子探针显微分析和原位激光烧蚀 - 电感耦合等离子体 - 质谱分析表明，高 Re 浓度是由于等价 Re 取代了辉钼矿中的 Mo。 [11] 独居石和金红石出现在法国地块中央 (FMC) 的 Echassieres 地区的热液蚀变 W 矿化中，使用原位激光烧蚀-电感耦合等离子体-四极杆质谱仪 (LA-ICP-多发性硬化症）。 [12] 然而，原位激光烧蚀电感耦合等离子体质谱结果表明，黄铁矿中的 Au 浓度从低于检测限到 41 ppm 不等，并且与 Cu 呈正相关（r = 0. [13] 详细的原位激光烧蚀电感耦合等离子体质谱法 (LA-ICP-MS) 是一种强大的技术，可以从 Raja 远景区的共生和结构特征良好的黄铁矿中生成强大的微量元素和硫同位素数据库。 [14] 本文介绍了一项有限的试点研究的结果，该研究旨在测试岩相和原位激光烧蚀电感耦合等离子体质谱 (LA-ICPMS) 分析技术在从三个皮尔巴拉采石露头到两个非采石场露天场地。 [15] 我们对不同阶段的黄铁矿和毒砂进行了原位激光烧蚀多收集器电感耦合等离子体质谱 (LA-MC-ICP-MS) 硫 (S) 同位素分析，以提高我们对矿床来源和成因的了解。 [16] ，黄铁矿），原位激光烧蚀电感耦合等离子体质谱（LA-ICP-MS）数据在区分前矿石和热液碳酸盐中的应用仍然相对未经测试。 [17] nan [18] nan [19] nan [20] nan [21] nan [22]
situ laser fenestration
We previously described a transfemoral antegrade in situ laser fenestration technique (in situ fenestrated endovascular abdominal aortic aneurysm repair) for ruptured thoracoabdominal aortic aneurysms. [1] In this study, we assessed early and mid-term outcomes of total endovascular arch repair combined with a new method of in situ laser fenestration. [2] OBJECTIVE To summarize available in-situ laser fenestration (ISLF) literature, including experimental studies with their subsequent recommendations regarding optimal fenestration technique and fabric; as well as the short and mid-term results of clinical studies. [3] In situ laser fenestration (ISLF) is currently used to reconstruct the aortic major branches during thoracic endovascular aortic repair (TEVAR). [4] METHODS We hereby reported a 55-year-old gentleman with late presentation of AC, treated by a novel strategy with thoracic endograft and in situ laser fenestration for left subclavian artery (LSA) revascularization. [5] He was first treated in 2006 for an abdominal aortic aneurysm with a bifurcated endograft, then in 2016 for a tender type IV thoracoabdominal aortic aneurysm with a proximal aortic cuff with in situ laser fenestrations. [6] This study aimed to present the case of a patient with aortic dissection after previous open cardiac surgery who was successfully treated by in situ laser fenestration for revascularization of aortic arch. [7]我们之前描述了用于破裂的胸腹主动脉瘤的经股前行原位激光开窗技术（原位开窗血管内腹主动脉瘤修复）。 [1] 在这项研究中，我们评估了全血管内弓修复结合原位激光开窗新方法的早期和中期结果。 [2] 客观的 总结现有的原位激光开窗 (ISLF) 文献，包括实验研究及其对最佳开窗技术和织物的后续建议；以及临床研究的短期和中期结果。 [3] 原位激光开窗术 (ISLF) 目前用于在胸腔内主动脉修复 (TEVAR) 期间重建主动脉主要分支。 [4] nan [5] nan [6] nan [7]
situ laser induced
The manifestation of these different states is exemplified by combining global torque measurements and local in situ laser induced fluorescence microscopy imaging. [1] The purpose of this study is to investigate the applicability of in-situ laser induced breakdown spectroscopy (LIBS) for deuterium retention measurements in tungsten coatings with different morphology and oxygen content. [2] This work describes improvements made to the in-situ laser induced fluorescence SO2 instrument as originally described in Rollins et al. [3]这些不同状态的表现通过结合全局扭矩测量和局部原位激光诱导荧光显微镜成像来举例说明。 [1] 本研究的目的是研究原位激光诱导击穿光谱 (LIBS) 在不同形态和氧含量的钨涂层中氘保留测量的适用性。 [2] 这项工作描述了对原位激光诱导荧光 SO2 仪器的改进，如最初在 Rollins 等人中所述。 [3]
situ laser absorption
In this work, a method for experimentally determining a local characteristic velocity, c∗ , is presented for purposes of analyzing rocket combustion progress based on in-situ laser absorption spectroscopy measurements of temperature and gas composition. [1] We demonstrate an OH sensor based on in situ laser absorption spectroscopy for deployment in industrial conditions. [2]在这项工作中，提出了一种通过实验确定局部特征速度 c* 的方法，用于基于温度和气体成分的原位激光吸收光谱测量分析火箭燃烧进程。 [1] nan [2]
situ laser ranging
To increase the measurement rate and reduce the ranging error of real-time in-situ laser ranging in full-waveform light detection and ranging (LiDAR), a back propagation (BP) neural network-based online ranging method (BPO) implemented on FPGA is proposed. [1] In this paper, an online echo waveform fitting-based method is proposed for the real-time in situ laser ranging. [2]为提高全波形光探测与测距（LiDAR）中实时原位激光测距的测量速率并降低测距误差，在FPGA上实现了一种基于反向传播（BP）神经网络的在线测距方法（BPO）被提议。 [1] nan [2]
situ laser heating
Through a series of high-pressure x-ray diffraction experiments combined with in situ laser heating, we explore the pressure-temperature phase diagram of germanium (Ge) at pressures up to 110 GPa and temperatures exceeding 3000 K. [1] Combination of in situ laser heating with single-crystal X-ray diffraction (scXRD) in diamond anvil cells (DACs) provides a tool to study crystal structures and/or chemistry of materials at simultaneous high pressures and high temperatures. [2]通过一系列与原位激光加热相结合的高压 X 射线衍射实验，我们探索了在高达 110 GPa 的压力和超过 3000 K 的温度下锗 (Ge) 的压力-温度相图。 [1] nan [2]
situ laser cladding
Herein, TiB composite coatings were successfully fabricated on the surface of a Ti–6Al–4V alloy with Ti/B/CeO2 powders by in situ laser cladding technology, and the microstructure and corrosion resistance were investigated. [1] To explore the effect of laser scanning speed on the microstructure and performance of Cr3C2-NiCr cermet layers fabricated by in-situ laser cladding, Cr3C2-NiCr cermet layers were laser cladded from Ni/Cr/Graphite (25:65:10 wt. [2]在此，采用原位激光熔覆技术在Ti/B/CeO2粉末的Ti-6Al-4V合金表面成功制备了TiB复合涂层，并对其微观结构和耐腐蚀性进行了研究。 [1] 为了探索激光扫描速度对原位激光熔覆制备的 Cr3C2-NiCr 金属陶瓷层的微观结构和性能的影响，采用 Ni/Cr/Graphite（25:65:10 wt. [2]
situ laser remelting
In this study, the (FeMnCrNiCo + 20%TiC) laser cladding layer was re-treated through multiple-pass in-situ laser remelting. [1] In this work, the efficacy of two in situ laser remelting approaches on the elimination of pores during LPBF of a titanium alloy Ti-6. [2]本研究通过多道原位激光重熔对（FeMnCrNiCo + 20%TiC）激光熔覆层进行再处理。 [1] 在这项工作中，两种原位激光重熔方法在钛合金 Ti-6 LPBF 过程中消除气孔的效果。 [2]