Mxene Films(Mxene 薄膜)研究综述
Mxene Films Mxene 薄膜 - In this work, the static contact angles of MXene films were studied using water, glycerol, and diiodomethane. [1] This review focuses on MXene films, an important form of MXene-based materials for practical applications. [2] Such piezoelectric PVDF-TrFE/MXene films are capable of sensing body motion for healthcare. [3] —MSL Densification of MXene films to remove voids results in high-performance films. [4] Correction for ‘Dynamic response study of Ti3C2-MXene films to shockwave and impact forces’ by Shreyas Srivatsa et al. [5] , the thickness of MXene films, and the scope of the analytes, are elaborated towards Ti3C2Tx MXene based gas sensors after characterizing their sensing performance toward reducing gases (NH3 and CO) and oxidizing gas (NO2). [6] The highly aligned MXene nanosheets make the obtained PVDF/MXene films with high electrical conductivity from 21. [7] Large-scale fabrication of MXene films is in high demand for various applications, but it remains difficult to meet industrial requirements. [8] MXene films with different work functions are studied as electron and hole collection buffer materials for non-fullerene organic solar cells (OSCs) with poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b′]dithiophene))-alt-(5,5-(1′,3′-di-2-thienyl-5′,7′-bis(2-ethylhexyl)benzo[1′,2′-c:4′,5′-c′]dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene (ITIC) as the active materials. [9] MXenes: oxidation pathways of Ti 3 C 2 T x nanosheetsThe storage and dispersion of MXene films in media influence their oxidation behavior. [10] ” CNFs and Ti3C2Tx colloidal dispersions with different weight ratios can be made into freestanding hybrid films that have both high electrical conductivity and excellent mechanical strength; their layered structure is similar to that of MXene films. [11]在这项工作中，使用水、甘油和二碘甲烷研究了 MXene 薄膜的静态接触角。 [1] 本综述重点介绍 MXene 薄膜，这是一种用于实际应用的 MXene 基材料的重要形式。 [2] 这种压电 PVDF-TrFE/MXene 薄膜能够感应身体运动以用于医疗保健。 [3] — MSL 对 MXene 薄膜进行致密化以去除空隙，从而获得高性能薄膜。 [4] Shreyas Srivatsa 等人对“Ti3C2-MXene 薄膜对冲击波和冲击力的动态响应研究”的修正。 [5] 在描述了基于 Ti3C2Tx MXene 的气体传感器对还原性气体（NH3 和 CO）和氧化性气体（NO2）的传感性能之后，MXene 薄膜的厚度和分析物的范围进行了详细说明。 [6] 高度对齐的 MXene 纳米片使获得的 PVDF/MXene 薄膜具有高导电性，从 21 开始。 [7] MXene 薄膜的大规模制造在各种应用中都有很高的需求，但仍然难以满足工业要求。 [8] 研究了具有不同功函数的 MXene 薄膜作为具有聚[(2,6-(4,8-双(5-(2-乙基己基)))噻吩-的非富勒烯有机太阳能电池 (OSC) 的电子和空穴收集缓冲材料。 2). -yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7 '-双(2-乙基己基)苯并[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) 和 3,9-bis(2 -亚甲基- (3-(1,1-二氰基亚甲基)-茚满酮))-5,5,11,11-四(4-己基苯基)-二噻吩[2,3-d:2',3'-d'] -s- 茚并[1,2-b:5,6-b']二噻吩（ITIC）作为活性材料。 [9] MXenes：Ti 3 C 2 T x 纳米片的氧化途径 MXene 薄膜在介质中的存储和分散会影响它们的氧化行为。 [10] ” 不同重量比的 CNFs 和 Ti3C2Tx 胶体分散体可以制成具有高导电性和优异机械强度的独立式杂化薄膜；它们的层状结构类似于 MXene 薄膜。 [11]
Ti3c2tx Mxene Films Ti3c2tx Mxene 薄膜
Therefore, in this work, we fabricated sandwiched cellulose nanofiber/boron nitride nanosheet/Ti3C2Tx MXene films by using a simple and effective alternating vacuum filtration method, and as a result, the special sandwich structure endows the film with excellent electromagnetic shielding, insulation and TC performance. [1] Inspired by the high stretchability of kirigami patterns, we demonstrate a bottom-up methodology to design highly stretchable and conductive polydimethylsiloxane (PDMS)/Ti3C2Tx MXene films for electromagnetic interference (EMI) shielding and pressure sensing applications by constructing wrinkled MXene patterns on a flexible PDMS substrate to create a hierarchical surface with primary and secondary surface wrinkles. [2] In order to fully excavate Ti3C2Tx's electrochemical energy storage capability, a combination of cold pressing and annealing treatment is developed to fabricate free-standing Ti3C2Tx MXene films featuring well-defined film structure, planar macropores, in-plane defects and expanded interlayer spacing. [3] In this study, we demonstrate a facile method to fabricate ultrathin (~10 nm), Ti3C2Tx MXene films by an interfacial assembly technique. [4] In this paper, we propose an integrated photothermal optical sensor (PHOS) using Ti3C2Tx MXene films. [5] Methods Multilayered Ti3C2Tx MXene films were prepared and characterized by XRD and SEM. [6] Flexible and conductive 3D macroporous Ti3C2Tx MXene films were fabricated and tested as MIB cathodes after the incorporation of Mg ions from a Mg2+-containing electrolyte. [7] Dramatically, the heteroatom-controlled Ti3C2Tx MXene films show reve. [8]因此，在这项工作中，我们采用简单有效的交替真空过滤方法制备了夹层纤维素纳米纤维/氮化硼纳米片/Ti3C2Tx MXene薄膜，因此，特殊的夹层结构赋予了薄膜优异的电磁屏蔽、绝缘和TC表现。 [1] 受剪纸图案的高拉伸性启发，我们展示了一种自下而上的方法，通过在柔性 PDMS 上构建起皱的 MXene 图案来设计用于电磁干扰 (EMI) 屏蔽和压力传感应用的高度可拉伸和导电的聚二甲基硅氧烷 (PDMS)/Ti3C2Tx MXene 薄膜基材以创建具有主要和次要表面皱纹的分层表面。 [2] 为了充分挖掘Ti3C2Tx的电化学储能能力，开发了冷压和退火处理相结合的方法，制备了具有明确薄膜结构、平面大孔、面内缺陷和扩大层间距的独立式Ti3C2Tx MXene薄膜。 [3] 在这项研究中，我们展示了一种通过界面组装技术制造超薄（~10 nm）Ti3C2Tx MXene 薄膜的简便方法。 [4] 在本文中，我们提出了一种使用 Ti3C2Tx MXene 薄膜的集成光热光学传感器 (PHOS)。 [5] 方法 制备多层 Ti3C2Tx MXene 薄膜，并通过 XRD 和 SEM 对其进行表征。 [6] 在从含 Mg2+ 的电解质中掺入 Mg 离子后，制造并测试了柔性和导电的 3D 大孔 Ti3C2Tx MXene 薄膜作为 MIB 阴极。 [7] 戏剧性地，杂原子控制的 Ti3C2Tx MXene 薄膜显示出惊人的效果。 [8]
X Mxene Films X Mxene 电影
Here, we enhanced the stability of Ti 3 C 2 T x MXene films by coating a continuous zeolitic imidazolate framework-8 (ZIF-8) layer. [1] In this study, we conduct systematic annealing of Ti3C2T x MXene films in which we present the 2D MXene flake phase transformation to ordered vacancy superstructure of a bulk three-dimensional (3D) Ti2C and TiC y crystals at 700 °C ⩽ T ⩽ 1000 °C with subsequent transformation to disordered carbon vacancy cubic TiC y at higher temperatures (T > 1000 °C). [2] In situ X-ray diffraction was employed to simultaneously measure dynamic swelling behavior where Ti3C2T x MXene films displayed selective swelling toward ethanol vapor over CO2 gas. [3]在这里，我们通过涂覆连续沸石咪唑酯骨架 8 (ZIF-8) 层来增强 Ti 3 C 2 T x MXene 薄膜的稳定性。 [1] 在这项研究中，我们对 Ti3C2T x MXene 薄膜进行了系统退火，其中我们在 700 °C ⩽ T ⩽ 1000 ° 下将 2D MXene 薄片相转变为块状三维 (3D) Ti2C 和 TiC y 晶体的有序空位超结构C随后在较高温度（T > 1000°C）下转变为无序碳空位立方TiC y 。 [2] 原位 X 射线衍射用于同时测量动态溶胀行为，其中 Ti3C2T x MXene 薄膜显示出相对于 CO2 气体对乙醇蒸气的选择性溶胀。 [3]