Introduction to Novel Photocatalyst

Synthesis conditions for the novel photocatalyst, including calcination temperature and copper loading, were varied before photocatalysis to obtain at the optimal reaction efficiency.

Indeed, a series of experiments were carried out in a continuous planar reactor using a novel photocatalyst/TiO2 technology with metal wires e.

A novel photocatalyst was developed by combining TiO2 (P25), reduced graphene oxide (rGO), and multi-core@shell clustered carbon dots (CDs) by one-step hydrothermal method for the high efficiency visible-light degradation of organic dyes and antibacterial application.

Recent advancements in the synthesis and fundamental physical/mechanistic studies of novel photocatalysts for hydrogen evolution from biomass conversion are summarized.

coli using LF as a novel photocatalyst was successfully demonstrated as an alternative and promising method for disinfection purposes.

The Mo/Bi2MoO6/Bi3ClO4 nanocomposite as a novel photocatalyst not only exhibited an excellent visible-light photocatalytic desulfurization performance of thiophene (~97%), but also had better photodesulfurization efficiency than Mo/Bi2MoO6 and Bi3ClO4 nanostructures.

We suggest that the MoS2 heterophase boundary can serve as a novel photocatalyst.

Hence, the design and synthesis of novel photocatalysts based on g-C3N4 is a prosperous approach towards water and wastewater treatment, especially against pollutants of organic nature.

Novel photocatalysts based on combination of suitable metals or metal oxides have been developed to facilitate photogeneration of electrons over a wider spectral range for complete mineralization.

Recently, we have witnessed a booming development of composites and multi-dopant metal oxides to be employed as novel photocatalysts.

To this end, the fabrication of novel photocatalysts with unique electrochemical properties and high catalytic efficiency is of utmost importance and requires adequate attention.

The search of novel photocatalysts active under solar radiation has been object of extensive work over the last decades.

Hence, photoreduction of Cr(VI) to Cr(III) and degradation of rhodamine B (RhB) using a novel photocatalyst is particularly important.

It is hoped that this review will provide a broad picture and inspire the exploration of novel photocatalysts for efficient NH3 production.

This work not only paves the way towards stable PTC materials but also provides new insights into the design of novel photocatalysts.

In particular, it was realized that future work needs to be directed towards the synthesis of novel photocatalysts or the development of reaction conditions that minimize or completely inhibit photo-corrosion, one of the major issues faced during the light-driven production of H2 from H2S in the presence of several photocatalysts.

BACKGROUND This research introduces the application of a novel photocatalyst including Co3O@SiO2@TiO2-Ag nanocomposite with highly photocatalytic stability and core-shell structure for the removal of toxic methyl violet from aqueous solution.

The design of antenna–reactor photocatalysts has become a powerful strategy to covert transition metal reactors from traditional thermocatalysts to novel photocatalysts.

Both non-metallic g-C3N4 and BiVO4 are novel photocatalysts responsive to visible light, but their low charge separation efficiency restricts their inconspicuous photocatalytic activity.

In this work, a novel photocatalyst, MoS2/SnIn4S8, was synthesized through hydrothermal method by introducing few-layer MoS2 nanosheets and then employed to establish an integrated photocatalytic reduction/oxidation system for the remediation of TBBPA under visible light.

In this study, novel photocatalysts MVO4/g-C3N4 (M = La, Gd) were prepared by the hydrothermal method, through which different loading amounts of 10–50%MVO4 and g-C3N4 were mixed and ultrasonically oscillated to gain heterojunction catalysts.

Design and preparation of a novel photocatalyst, based on polyhydromethylsiloxane (PHMS) was reported.

It is anticipated that the present work can facilitate the development of novel photocatalysts for selective oxidation based on ·CO3−.

However, the expeditious discovery of novel photocatalysts and synthetic pathways remains challenging.

Modification and bandgap engineering are proposed to be extremely significant in improving the photocatalytic activity of novel photocatalysts.

coli can be effectively removed by the novel photocatalyst under LED light illumination.

The present work offers a unique synthesis strategy to develop the novel photocatalyst with efficient photocatalytic performance.

The investigation may lead to the development of novel photocatalyst for the degradation of toxic dye which is discharged into sewage from various chemical industries.

Herein, novel photocatalysts are reported through coupling Sb2MoO6 with g-C3N4 nanotube (abbreviated as GCN nanotube) by a simple reflux method.

A novel photocatalyst of Fe3O4/ZnO nanoparticles embedded carboxylate-rich carbon (Fe3O4/ZnO/CRC) was developed, and its photocatalytic activity was evaluated for the degradation of crystal violet (CV) under natural sunlight.

Recently, we have witnessed a booming development of composites and multi-dopant metal oxides to be employed as novel photocatalysts.

The superior reusability and structural stability further indicated the MXene-based novel photocatalyst is promising for application in environmental remediation.

Ps-FNPs have been extensively studied for photocatalytic activity test against Rhodamine B, Methylene blue and nigrosine showed potential dye degradation in the presence of sunlight proved to be novel photocatalysts.

This outcome provides a new route for the design of novel photocatalysts with improved efficiency and selectivity.

This novel photocatalyst with modulated charge transfer was prepared by hydrothermal treatment and subsequent cation-exchange reactions.

In this work, a novel photocatalyst, Ce0.

This investigation opens up the possibility of adopting ACN-coated DMSTNs as novel photocatalysts for energy conversion in visible light environment.

Herein, a series of novel photocatalysts with Type-II In2S3/bismuth molybdate (Bi2MoO6) heterostructures were handily fabricated through hydrothermal route.

A novel photocatalyst was successfully synthesized by immobilizing hydrated titanium dioxide (HTO) nanoparticle within rice straw (RS) via a sol–gel method.

Here, we propose a novel photocatalyst of europium doped calcium titanate (Eu:CaTiO3) were synthesized by simple sol–gel method.

The design of novel photocatalyst with high efficiency and low-toxicity provides a new approach to achieve full utilization of solar energy and efficient environmental purification.

A novel photocatalyst of rGO-wrapped Ti3C2/TiO2 nanowires ((Ti3C2/TiO2)@rGO) was successfully synthesized to remove hexavalent chromium (Cr(VI)) and Rhodamine B (RhB) from wastewater.

The prepared MoS2/Ag2S/Ag nanocomposites as a novel photocatalysts present effective photocatalytic performance for the photodegradation of congo red (CR), tetracycline hydrochloride (TC-HCl) and disinfection for Pseudomonas aeruginosa (P.

Furthermore, a novel photocatalyst of Mo/Er-Yb:TiO2@W18O49 quasi-core/shell heterostructure was designed based on the localized surface plasmon resonances (LSPR) effect of W18O49 through solvothermal process.

A novel photocatalyst was prepared by immobilization of TiO2 on the surface of FSM-16 catalyst support, and was characterized by different techniques.

In this study, novel photocatalysts Ag3PO4@MWCNTs@PPy with excellent photocatalytic activity and photostability were successfully synthesized.

Herein, we report a novel photocatalyst with isolated Pt single atomic sites anchored on nanoporous TiO2 film prepared by a facile immersion and reduction method.

Here in this work, we focused on the design of a novel photocatalyst which not only accelerated the transfer rate of Cr(VI) and electrons but also provided specific transfer routes for them.

An improved metal-to-ligand charge transfer (MLCT) mechanism was proposed in a novel photocatalyst based on graphitic carbon nitride (g-C3N4).

Herein, we report highly reliable and reproducible protein–inorganic hybrid CaMoO4:Eu3+ microstructures as a novel photocatalyst for decontamination of environments using an energy-efficient and cost-effective green synthesis.

A novel photocatalyst of mesoporous graphitic carbon nitride (g-C3N4) co-doped with Co and Mo (Co/Mo-MCN) has been one-pot synthesized via a simple template-free method; cobalt chloride and molybdenum disulfide were used as the Co and Mo sources, respectively.

Herein, we designed a novel photocatalyst of Z-scheme BiVO4 (0 4 0)-Ag@CdS, in which Ag was photo-deposition on the (0 4 0) facets of BiVO4 as the "linker" between BiVO4 and CdS.

This chapter is mainly focused on different greener synthesis approaches employed for the synthesis of novel photocatalysts.

The development of novel photocatalyst is an important issue for improving the photocatalytic hydrogen production efficiency.

In this paper, a Z-scheme Ag6Si2O7/AgCl heterojunction composite was successfully constructed via a one-step co-precipitation method and investigated as a novel photocatalyst for the first time.

Modified zeolites have been used under UV irradiation as novel photocatalysts.

Herein, the recent progress in the development of novel photocatalysts for wastewater treatment via various methods in the sight of composite techniques are systematically discussed.

The search for novel photocatalysts that make use of almost the entire solar spectrum remains an ongoing task to achieve high efficiency in energy conversion.

The Rare Earth (RE) doped NPs have been applied as a novel photocatalyst for removal of rodhamin-B (rh-B) and malachite green (MG) dyes.

Moreover, this approach to enhance the photocatalytic activity by constructing a Z-scheme heterojunction and surface polarization could expand to other photosystems, which provides a new avenue for the rational design and the synthesis of novel photocatalysts.

Moreover, the novel photocatalysts could be repeatedly recycled for 15 consecutive trials without noticeable decrease in its effectiveness and have a great potential application in water treatment.

In this work, a novel photocatalyst of I-deficient BiO1.

The effective preparation method of CdS-Bi2S3 could be useful to design and fabricate the novel photocatalyst which may have several applications in the field of catalysis and in the medicine.

LaCoO3 compound and novel photocatalysts of LaCo0.

In this article, a novel photocatalyst: Ag/Sm(OH)3 nanotubes was successfully synthesized using a common oil bath approach at 80 °C.

We have proposed a novel photocatalyst by metal free heterogeneous graphitic carbon using melamine and its recombination effects were minimized by chitosan which act as an electron carrier.

A novel photocatalyst [Mo3S13]2−/TiO2 was fabricated by combining [Mo3S13]2− with commercial TiO2 by an impregnation method.

The comparison of photocatalytic activities between novel photocatalyst was based on a numerical approach supported by the complex kinetic model.

This work provides a potential method for developing a novel photocatalyst with excellent catalytic activity, adsorbing capability and recycling use.

The present work is devoted to the synthesis of a novel photocatalyst of TiO2/Ag3PO4/bentonite composite and its utilization for degradation of methylene blue (MB) in aqueous solution under visible.

The development of novel photocatalysts with considerable activity for completely removal of different pollutants from the environment is a dominating goal of modern chemistry.

In this work, a novel photocatalyst, Ni2P decorated NiO/g-C3N4 p-n junction (NiO/Ni2P/CN, abbreviating g-C3N4 as CN) is successfully developed by a one-step in-situ phosphating of Ni(OH)2/CN.

In this work, a novel photocatalyst, g-C3N4/Ti3C2 (CNTC) composite, was prepared by an evaporation-induced self-assembly method.

After characterization of the prepared materials with X-ray diffraction (XRD), X-ray fluorescence (XRF) patterns, Fourier transmission infrared (FT-IR), high resolution transmission electron microscope (TEM), N2 adsorption-desorption isotherm, UV-vis diffuse reflectance and photoluminance (PL), the materials were applied as novel photocatalysts for desulfurization of dibenzothiophene (DBT) and gas oil using different radiation sources at room temperature.

As a novel photocatalyst, the photocatalytic activity for hydrogen evolution was tested by water splitting using ethanol as sacrificial agent under solar light irradiation.

The recent advances and important consequences of 2D materials, perovskites, and other novel photocatalysts for H2 generation have also been reviewed.

A novel photocatalyst, titanium dioxide/spherical graphene nodules (TiO2/SGNs) composites were prepared successfully by hydrothermal synthesis.

The photodegradation kinetics via using the as-prepared Fe3O4@ZnO@N-C composite as a novel photocatalyst are systematically investigated.

In this study, a degradation treatment method for tetracycline (TC), one of the commonly used antibiotics, was explored by using novel photocatalysts of rGO/Ag2CO3 under simulated sunlight, because conventional treatment methods are not efficient on the removal of TC.

This work paves the way for other oxide composites applied as novel photocatalysts based on the design and construction of interlaced nanosheet/particle heterostructures.

In this work, novel photocatalysts were developed to effectively degrade phenol under simulated sunlight.

This research provided an efficient approach by a novel photocatalyst for the removal of CTC from wastewater.

Novel photocatalysts based on sunlight-driven active two-dimensional (2D) layered materials have drawn considerable attention because of their structural-to-photoactive properties.

We have delineated the synthesis of some novel photocatalysts that preferentially convert CO2 to methanol as a major or a sole product.

Our results indicate that the CoxNi1−xFe2O4/MWCNT composite can be effectively applied for the removal of organic pollutants as a novel photocatalyst.

The present work deals with the development of a novel photocatalyst to decompose most of the organic pollutants.