## What is/are Flywheel System?

Flywheel System - Herein, a hydraulic transmission and accumulator system (HTAS) is designed to replace the original mechanical transmission and flywheel system (MTFS), aiming to enhance the total energy conversion performance of the FABWEC system.^{[1]}In this paper, the integration of the dynamic behavior of the flywheel system into the load simulation tool OpenFAST is presented.

^{[2]}Owing to the advantages of fast response and frequent charge-discharge characteristics, the flywheel system can be used to support and regulate the power grid through the process of the frequency and amplitude modulation.

^{[3]}Combining the advantages of battery’s high specific energy and flywheel system’s high specific power, synthetically considering the effects of non-linear time-varying factors such as battery’s state of charge (SOC), open circuit voltage (OCV) and heat loss as well as flywheel’s rotating speed and its motor characteristic, the mathematical models of a battery-flywheel compound energy storage system are established.

^{[4]}Free energy generation using flywheel system is a device that generates friendly energy which called renewable power.

^{[5]}It is first revealed that this problem is solvable if and only if the state-of-energy of all the flywheel systems synchronize to a common time-varying manifold governed by a nonautonomous dynamic system.

^{[6]}This research develops a control strategy for the flywheel system to inject or draw real power to or from the connected line on a voltage command, thereby mitigating voltage swings created by variable and intermittent power supply from wind generators.

^{[7]}This paper focusses on the electrical machine and power electronics, an important part of a flywheel system, the electrical machine rotating with the flywheel inertia in order to perform charge-discharge cycles.

^{[8]}Because of the launch vibration and shock, magnetically suspended flywheels (MSFWs) are equipped with an additional launch locking protective device (LLPD), and the LLPD performance has great influence on the attitude control precision of the flywheel system.

^{[9]}In this research study, two-dimensional axisymmetric finite element model based on the H-formulation was studied to analyze the levitation characteristics of a flywheel system by COMSOL Multiphysics 5.

^{[10]}The purpose of the current study is to obtain a motor capable of operating at high speeds up to 30,000 rpm for flywheel systems used in mechanical energy storage applications.

^{[11]}Simulink model is built according to the mathematic model of flywheel system which is a closed-loop system.

^{[12]}This paper proposes a practical life prediction model for Flywheel Systems (FSs) using the Stochastic Hybrid Automaton (SHA) method.

^{[13]}Among other measures aimed at coping with this issues Terna, the Italian transmission system operator, is installing two new Synchronous Condensers / Flywheel Systems (SCFSs) in Selargius 400 kV substation.

^{[14]}Hence, simulation tests have been carried out in order to investigate if the flywheel system can be an effective solution to tackle the aging of the batteries.

^{[15]}Flywheel systems have significant advantages over chemical batteries also it can be used to control the spacecraft attitude.

^{[16]}In this paper, a set of flywheel system based on sine wave drive is designed and implemented.

^{[17]}

## Speed Flywheel System

Secondly, the paper describes a high-speed flywheel system coupled to an automotive transmission.^{[1]}A digital control platform for flywheel AMBs based on a single-core digital signal processer (DSP) could not satisfy a high speed flywheel system with high dynamic complexity for its low integration, complex structure and inadequate interaction performance.

^{[2]}