Uns S31803(우리 S31803)란 무엇입니까?
Uns S31803 우리 S31803 - Corrosion results of UNS S82551/S82541 tubing were compared to UNS S31803 and UNS S39274. [1]UNS S82551/S82541 튜빙의 부식 결과를 UNS S31803 및 UNS S39274와 비교했습니다. [1]
duplex stainless steel 이중 스테인리스 스틸
In this work, specimens of the duplex stainless steel UNS S31803 were submitted to cooling cycles at controlled rates under non-isothermal conditions. [1] This study aims at assessing the degree of susceptibility to intergranular corrosion of the UNS S31803 duplex stainless steel and the 0. [2] Duplex stainless steel UNS S31803 exhibit good mechanical strength with excellent corrosion properties due to its microstructure composed by the phases, in equal proportion, austenite and ferrite. [3] ABSTRACT The influence of sensitisation heat treatment, surface roughness and repetitive cyclic voltammetry (RCV) procedure (that was used to create passive films on the surface of sensitised samples) on the corrosion behaviour of UNS S31803 duplex stainless steel was evaluated using sodium hydroxide etching, double-loop electrochemical potentiodynamic reactivation (DLEPR), potentiodynamic polarisation, Mott–Schottky analysis, X-ray diffraction and optical microscopy techniques. [4] Pitting corrosion potential of a UNS S31803 duplex stainless steel (DSS) heat treated between 750 °C and 850 °C at different aging times was related to the extent of the Cr- and Mo-depleted areas at sigma-ferrite and sigma-austenite interfaces, estimated using DICTRA® simulations. [5] In search to improve the detection sensitivity of the sigma phase, this paper presents results obtained by Linear Sweep Voltammetry (LSV) in Duplex Stainless Steel UNS S31803 as a Nondestructive Testing (NDT) model. [6] The metals under consideration are a low-alloyed carbon steel (S235JR), an austenitic stainless steel (UNS S31603) and a duplex stainless steel (UNS S31803). [7] The 2205 duplex stainless steel (UNS S31803) was investigated. [8]이 작업에서 이중 스테인리스강 UNS S31803의 시편은 비등온 조건에서 제어된 속도로 냉각 주기에 적용되었습니다. [1] 본 연구는 UNS S31803 듀플렉스 스테인리스강과 0의 입계부식에 대한 민감도를 평가하는 것을 목적으로 한다. [2] 이중 스테인리스강 UNS S31803은 오스테나이트와 페라이트가 같은 비율로 상으로 구성된 미세 조직으로 인해 우수한 부식 특성과 함께 우수한 기계적 강도를 나타냅니다. [3] 요약 UNS S31803 듀플렉스 스테인리스강의 부식 거동에 대한 증감 열처리, 표면 거칠기 및 반복 순환 전압전류법(RCV) 절차(감작된 샘플의 표면에 부동태 피막을 생성하는 데 사용됨)가 수산화나트륨 에칭을 사용하여 평가되었으며, 이중 루프 전기화학적 전위 역학적 재활성화(DLEPR), 전위 역학적 분극, Mott-Schottky 분석, X선 회절 및 광학 현미경 기술. [4] 750°C와 850°C 사이에서 다양한 노화 시간으로 열처리된 UNS S31803 듀플렉스 스테인리스강(DSS)의 공식 부식 가능성은 시그마-페라이트 및 시그마-오스테나이트 계면에서 Cr 및 Mo 결핍 영역의 범위와 관련이 있었습니다. , DICTRA® 시뮬레이션을 사용하여 추정됨. [5] 시그마 위상의 검출 감도를 향상시키기 위해 본 논문에서는 이중 스테인리스강 UNS S31803의 LSV(Linear Sweep Voltammetry)에서 얻은 결과를 비파괴 검사(NDT) 모델로 제시합니다. [6] 고려 중인 금속은 저합금 탄소강(S235JR), 오스테나이트계 스테인리스강(UNS S31603) 및 이중 스테인리스강(UNS S31803)입니다. [7] 2205 이중 스테인리스강(UNS S31803)이 조사되었습니다. [8]
Steel Uns S31803
In this work, specimens of the duplex stainless steel UNS S31803 were submitted to cooling cycles at controlled rates under non-isothermal conditions. [1] Duplex stainless steel UNS S31803 exhibit good mechanical strength with excellent corrosion properties due to its microstructure composed by the phases, in equal proportion, austenite and ferrite. [2] In search to improve the detection sensitivity of the sigma phase, this paper presents results obtained by Linear Sweep Voltammetry (LSV) in Duplex Stainless Steel UNS S31803 as a Nondestructive Testing (NDT) model. [3]이 작업에서 이중 스테인리스강 UNS S31803의 시편은 비등온 조건에서 제어된 속도로 냉각 주기에 적용되었습니다. [1] 이중 스테인리스강 UNS S31803은 오스테나이트와 페라이트가 같은 비율로 상으로 구성된 미세 조직으로 인해 우수한 부식 특성과 함께 우수한 기계적 강도를 나타냅니다. [2] 시그마 위상의 검출 감도를 향상시키기 위해 본 논문에서는 이중 스테인리스강 UNS S31803의 LSV(Linear Sweep Voltammetry)에서 얻은 결과를 비파괴 검사(NDT) 모델로 제시합니다. [3]
uns s31803 duplex
This study aims at assessing the degree of susceptibility to intergranular corrosion of the UNS S31803 duplex stainless steel and the 0. [1] ABSTRACT The influence of sensitisation heat treatment, surface roughness and repetitive cyclic voltammetry (RCV) procedure (that was used to create passive films on the surface of sensitised samples) on the corrosion behaviour of UNS S31803 duplex stainless steel was evaluated using sodium hydroxide etching, double-loop electrochemical potentiodynamic reactivation (DLEPR), potentiodynamic polarisation, Mott–Schottky analysis, X-ray diffraction and optical microscopy techniques. [2] Pitting corrosion potential of a UNS S31803 duplex stainless steel (DSS) heat treated between 750 °C and 850 °C at different aging times was related to the extent of the Cr- and Mo-depleted areas at sigma-ferrite and sigma-austenite interfaces, estimated using DICTRA® simulations. [3]본 연구는 UNS S31803 듀플렉스 스테인리스강과 0의 입계부식에 대한 민감도를 평가하는 것을 목적으로 한다. [1] 요약 UNS S31803 듀플렉스 스테인리스강의 부식 거동에 대한 증감 열처리, 표면 거칠기 및 반복 순환 전압전류법(RCV) 절차(감작된 샘플의 표면에 부동태 피막을 생성하는 데 사용됨)가 수산화나트륨 에칭을 사용하여 평가되었으며, 이중 루프 전기화학적 전위 역학적 재활성화(DLEPR), 전위 역학적 분극, Mott-Schottky 분석, X선 회절 및 광학 현미경 기술. [2] 750°C와 850°C 사이에서 다양한 노화 시간으로 열처리된 UNS S31803 듀플렉스 스테인리스강(DSS)의 공식 부식 가능성은 시그마-페라이트 및 시그마-오스테나이트 계면에서 Cr 및 Mo 결핍 영역의 범위와 관련이 있었습니다. , DICTRA® 시뮬레이션을 사용하여 추정됨. [3]