Ultrasonically Generated(초음파 생성)란 무엇입니까?
Ultrasonically Generated 초음파 생성 - Ultrasonically generated samples of 1s were characterized by standard methods and applied as photocatalysts for the photodegradation of bromocresol green (BCG) in aqueous solution under visible-light, leading to 94% degradation efficiency. [1] By imposing the ultrasound to the IJR, micro-scale turbulent eddies generated as the result of collapse of ultrasonically generated micro cavitation bubbles may generate a strong local shear. [2] The capillary number for the system (ratio of the characteristic viscous stress to the characteristic stress for stretching the lipid membrane) was two orders of magnitude lower than the values reported for breakage in an ultrasonically generated flow, indicating that vesicles do not rupture due to lysis of the membrane. [3] Experimental results show that the structure of ultrasonically generated bubbles forms in a conical shape with several concentric bubble rings above the transducer. [4] It has been reported in studies that the technological modification of water jet technology, ultrasonically generated pulsed water jet (PWJ) can be used for the peening application but still the detailed study of parametric variations for the peening process is not clearly explained. [5]1s의 초음파로 생성된 샘플은 표준 방법에 의해 특성화되었으며 가시광선 아래 수용액에서 브로모크레졸 그린(BCG)의 광분해를 위한 광촉매로 적용되어 94% 분해 효율로 이어졌습니다. [1] IJR에 초음파를 가하면 초음파로 생성된 마이크로 캐비테이션 기포의 붕괴로 인해 생성된 마이크로 규모의 난류가 강한 국부 전단력을 생성할 수 있습니다. [2] 시스템의 모세관 수(지질막을 스트레칭하기 위한 특성 응력에 대한 특성 점성 응력의 비율)는 초음파로 생성된 흐름에서 파손에 대해 보고된 값보다 100배 낮았으며, 이는 소포가 용해로 인해 파열되지 않음을 나타냅니다. 막의. [3] 실험 결과 초음파로 생성된 기포의 구조는 변환기 위에 여러 개의 동심원 기포 링이 있는 원뿔 모양으로 형성됨을 보여줍니다. [4] 워터 제트 기술의 기술적 수정인 초음파 발생 펄스 워터 제트(PWJ)가 피닝 적용에 사용될 수 있다는 연구 결과가 보고되었지만 여전히 피닝 공정의 매개변수 변화에 대한 자세한 연구는 명확하게 설명되지 않습니다. [5]