Thin Film Metallic(박막 금속)란 무엇입니까?
Thin Film Metallic 박막 금속 - Thin-film metallic glasses obtained by physical vapor deposition exhibit microstructures free from grain boundaries, crystallites and dislocations but also characterized by a nanometric surface roughness. [1] The differences in the devitrified ribbon and thin-film metallic glasses were traced back to structural differences in the amorphous state. [2] This work reports the use of a new high-temperature scanning indentation (HTSI) technique to monitor the physical changes occurring in thin-film metallic glasses (TFMGs) in situ during heat treatment at the local scale. [3] However, devices based on silicon substrates typically involve thin-film metallic electrodes which are unstable at high temperatures. [4] Here, ZrCuAg thin-film metallic glasses were deposited by DC magnetron sputtering. [5]물리적 기상 증착에 의해 얻어지는 박막 금속 유리는 결정립계, 결정자 및 전위가 없는 미세구조를 나타내지만 나노미터 표면 거칠기를 특징으로 합니다. [1] 실투된 리본과 박막 금속 유리의 차이는 비정질 상태의 구조적 차이로 거슬러 올라갑니다. [2] 이 연구는 국소 규모에서 열처리하는 동안 현장에서 박막 금속 유리(TFMG)에서 발생하는 물리적 변화를 모니터링하기 위해 새로운 HTSI(고온 스캐닝 압입) 기술을 사용하는 것을 보고합니다. [3] 그러나 실리콘 기판을 기반으로 하는 장치는 일반적으로 고온에서 불안정한 박막 금속 전극을 포함합니다. [4] 여기에서 ZrCuAg 박막 금속 유리는 DC 마그네트론 스퍼터링에 의해 증착되었습니다. [5]
thin film metallic glas
Thin film metallic glass (TFMG) is next-generation materials that are gaining importance in surface modification. [1] In this study, we assessed the characteristics of thin film metallic glass (TFMG)-coated needles by inserting them into polyurethane rubber blocks and porcine skin with underlying fat and muscle. [2] The thin film metallic glass (TFMG) is an effective diffusion barrier layer for PbTe-based thermoelectric (TE) modules. [3] Biologically safe Ti-based quaternary Ti-Nb-Zr-Si thin film metallic glass (TFMG) was fabricated by sputtering on Titanium alloy (Ti6Al4V or Ti alloy) substrates. [4] The biocompatible thin film metallic glass (TFMGs) materials can be used to modify the substrate material due to their good corrosion resistance and adequate biocompatibility. [5] , high corrosion and wear resistance, lower elastic modulus and enhanced antibacterial capacity) with Zr-based thin film metallic glass (TFMG) were studied in this work. [6]TFMG(Thin Film Metallic Glass)는 표면 개질에 있어 중요성이 커지고 있는 차세대 소재입니다. [1] 본 연구에서는 TFMG(Thin Film Metallic Glass) 코팅된 바늘을 폴리우레탄 고무 블록과 돼지 피부에 지방과 근육을 기본으로 삽입하여 특성을 평가했습니다. [2] 박막 금속 유리(TFMG)는 PbTe 기반 열전(TE) 모듈을 위한 효과적인 확산 차단층입니다. [3] 생물학적으로 안전한 Ti 기반 4차 Ti-Nb-Zr-Si 박막 금속 유리(TFMG)는 티타늄 합금(Ti6Al4V 또는 Ti 합금) 기판에 스퍼터링하여 제작되었습니다. [4] 생체 적합성 박막 금속 유리(TFMG) 재료는 우수한 내식성과 적절한 생체 적합성으로 인해 기판 재료를 수정하는 데 사용할 수 있습니다. [5] 이 연구에서는 Zr 기반 박막 금속 유리(TFMG)를 사용한 높은 부식 및 내마모성, 낮은 탄성 계수 및 향상된 항균 능력에 대해 연구했습니다. [6]
thin film metallic glass
In this study, we sought to enhance the cutting properties of the various blades by coating them with Zr- and Fe-based thin film metallic glasses (TFMGs) to a thickness of 234–255 nm via sputter deposition. [1] In this work, we report the thickness effects on microstructure, mechanical and soft magnetic properties of Fe75Zr25 thin film metallic glasses (TFMGs) prepared by DC magnetron sputtering. [2] The appearance of thin film metallic glasses (TFMGs) is gaining increasing interest because of their unique mechanical and anticorrosion properties and potential engineering applications. [3] The present study explores the optoelectronic responses of AgZr (AZ) and ITO/AgZr (IAZ) thin film metallic glasses (TFMGs) with different Ag and Zr compositions and processed by two different annealing methods, namely furnace annealing (FA) and laser annealing (LA). [4]이 연구에서 우리는 스퍼터 증착을 통해 234–255 nm의 두께로 Zr 및 Fe 기반 박막 금속 유리(TFMG)로 다양한 블레이드를 코팅하여 다양한 블레이드의 절단 특성을 향상시키려고 했습니다. [1] 이 작업에서 우리는 DC 마그네트론 스퍼터링에 의해 제조된 Fe75Zr25 박막 금속 유리(TFMG)의 미세 구조, 기계적 및 연자성 특성에 대한 두께 효과를 보고합니다. [2] 박막 금속 유리(TFMG)의 출현은 독특한 기계적 및 부식 방지 특성과 잠재적인 엔지니어링 응용으로 인해 점점 더 많은 관심을 받고 있습니다. [3] 현재의 연구는 Ag와 Zr 조성이 서로 다른 AgZr(AZ) 및 ITO/AgZr(IAZ) 박막 금속 유리(TFMG)의 광전자적 반응을 탐구하고 두 가지 다른 어닐링 방법, 즉 노 어닐링(FA) 및 레이저 어닐링( 라). [4]