Tensile Steel(인장강)란 무엇입니까?
Tensile Steel 인장강 - High-tensile steel of 490 MPa was selected to both base metal and welding materials for the test. [1]모재와 용접재는 모두 490 MPa의 고장력강을 선택하였다. [1]
High Tensile Steel 고장력강
In this study, to clarify the influence of various experimental methods on delayed fracture susceptibility of high tensile steel sheets, slow strain rate technique (SSRT), constant load test (CLT) and conventional strain rate technique (CSRT) were demonstrated using commercial high strength steel sheet, and the fracture surfaces were observed. [1] In this research, we have investigated flexural behavior in reinforced concrete beams with bars from bars from carbon fiber-reinforced polymer (CFRP), bars from high tensile steel (HTS), and glass fiber-reinforced polymer (GFRP) under static load. [2] The effects of needle peening (NP) on the bending fatigue limit of a high tensile steel (HTS) HT780 (JIS-SHY685)-welded joint containing an artificial semicircular slit on the weld toe were investigated. [3] In this study, resistance spot welding was performed using a high tensile steel plate SGAFC 780. [4] Modern warships are often constructed from aluminium alloys or high tensile steel, and their increasing range of roles indicates exposure to harsh seaway loads including slamming. [5]본 연구에서는 고장력강판의 지연파괴 취약성에 대한 다양한 실험방법의 영향을 명확히 하기 위해 상용 고강도 강판을 이용한 저변형률법(SSRT), 일정하중시험(CLT) 및 기존의 변형률법(CSRT)을 시연하였다. 강판 및 파단면이 관찰되었다. [1] 이 연구에서 우리는 탄소 섬유 강화 폴리머(CFRP)의 철근, 고장력강(HTS)의 철근 및 유리 섬유 강화 폴리머(GFRP)의 철근이 정적 하중을 받는 철근 콘크리트 보의 휨 거동을 조사했습니다. [2] 니들 피닝(NP)이 용접 발가락에 인공 반원 슬릿을 포함하는 고장력강(HTS) HT780(JIS-SHY685) 용접 조인트의 굽힘 피로 한계에 미치는 영향을 조사했습니다. [3] 본 연구에서는 고장력 강판 SGAFC 780을 사용하여 저항점 용접을 수행하였다. [4] 현대의 군함은 종종 알루미늄 합금이나 고장력강으로 구성되며, 그 역할이 점점 더 다양해지고 있음을 나타냅니다. 슬래밍을 포함한 가혹한 해상 하중에 대한 노출. [5]
Strength Tensile Steel 강도 인장강
The dissimilar joining of high strength tensile steel to Inconel 718 was joined using TIG welding. [1] Dissimilar joining of high strength tensile steels are joined using laser beam welding. [2]Inconel 718에 고강도 인장강의 이종 접합은 TIG 용접을 사용하여 접합되었습니다. [1] 고강도 인장강의 이종 접합은 레이저 빔 용접을 사용하여 접합됩니다. [2]
tensile steel bar 인장강봉
The fracture distribution, bearing capacity, deflection, and load-strain curves of the tensile steel bars were analysed. [1] The influences of concrete strength, reinforcement ratio of the non-prestressed tensile steel bars and prestressing force on the these tendons in terms of ultimate load and load deformation were examined. [2] The results indicate that the following: (1) the larger the external load, the shorter the initial rust time of the steel bar; (2) the corrosion rate of steel bar increases linearly with time, and the ratio of corrosion of steel bar increases quadratically with time, the larger the load, the more obvious the increase will be; (3) after the corrosion of steel bar, the change rate of the strain for the steel bar increases as the external load augments, and as a matter of fact, the change rate of the strain increases as well, besides, the degree of strain change for compressive steel is obviously lower compared with that of tensile steel bar; (4) the effect of electric corrosion on the deflection of the segments is more obvious with the increase of external load, and a quadratic increase relationship between the deflection and the corrosion is observed in the process of corrosion; (5) It can be concluded that plastic failure is observed for the segments without loading and for those without cracks in the initial stage of loading, which can be indicated directly by the relatively smaller loss rate of steel section, while brittle failure is presented as the failure pattern for the segments with cracks after loading for certain period, which means the loss rate of steel section is relatively larger. [3] Since the fracture of a tensile steel bar at the main cracked section is the leading reason for the failure of RC beams reinforced by prestressed CFRP, a fatigue life prediction model of RC beams reinforced by prestressed CFRP was developed based on an accumulative damage model. [4] Test results indicated that corrosion of the tensile steel bars led to premature failure of the concrete beams. [5]인장철근의 파단분포, 지지력, 처짐 및 하중-변형률 곡선을 분석하였다. [1] 극한하중 및 하중변형 측면에서 콘크리트 강도, 비프리스트레스 인장철근의 철근비 및 프리스트레스 힘이 이들 텐던에 미치는 영향을 조사하였다. [2] 결과는 다음을 나타냅니다. (1) 외부 하중이 클수록 철근의 초기 녹 시간이 짧아집니다. (2) 철근의 부식 속도는 시간에 따라 선형적으로 증가하고, 철근의 부식 비율은 시간에 따라 2차적으로 증가하며, 하중이 클수록 증가가 더 분명합니다. (3) 철근의 부식 후 외부하중이 증가함에 따라 철근에 대한 변형률의 변화율이 증가하고, 사실상 변형률의 정도 외에 변형률의 변화율도 함께 증가한다. 압축 강철의 변화는 인장 강철 막대의 변화와 비교하여 분명히 낮습니다. (4) 전기 부식이 세그먼트의 처짐에 미치는 영향은 외부 하중이 증가함에 따라 더 분명해지고 부식 과정에서 처짐과 부식 사이의 2차 증가 관계가 관찰됩니다. (5) 소성파괴는 하중이 없는 부분과 초기에 균열이 없는 부분에서 관찰되며 상대적으로 작은 강 단면 손실률로 직접 나타낼 수 있는 반면 취성파괴는 다음과 같이 제시된다. 일정 시간 하중을 가한 후 균열이 발생한 부분의 파손 패턴은 강재 단면의 손실률이 상대적으로 크다는 것을 의미합니다. [3] 주균열단면 인장철근의 파단은 프리스트레스 CFRP 보강 RC보의 파손의 주요 원인이므로 누적손상모형을 기반으로 프리스트레스 CFRP 보강 RC보의 피로수명 예측모형을 개발하였다. [4] 시험 결과는 인장철근의 부식으로 인해 콘크리트 보가 조기에 파손되는 것으로 나타났습니다. [5]
tensile steel mesh 인장 스틸 메쉬
In order to prove the suitability of such support systems with high-tensile steel mesh and bolts and to analyse the bearing behaviour of them, a large-scale test setup was commissioned in Walenstadt, Switzerland. [1] In order to prove the suitability of such support systems with high-tensile steel mesh and bolts, and also to analyse their bearing behaviour, a large-scale test setup was commissioned in Walenstadt, Switzerland. [2]고장력 철망과 볼트가 있는 지지 시스템의 적합성을 증명하고 베어링 거동을 분석하기 위해 스위스 발렌슈타트에서 대규모 테스트 설정을 의뢰했습니다. [1] 고장력 철망과 볼트가 있는 지지 시스템의 적합성을 증명하고 베어링 거동을 분석하기 위해 스위스 발렌슈타트에서 대규모 테스트 설정을 의뢰했습니다. [2]
tensile steel plate 인장강판
In this study, resistance spot welding was performed using a high tensile steel plate SGAFC 780. [1] The effect of aluminum acetate coating treatment on the bod strength of the solid-state bonded interface of A6061 aluminum alloy and high-tensile steel plate was investigated by SEM observation of fractured surfaces and interfacial microstructures. [2]본 연구에서는 고장력 강판 SGAFC 780을 사용하여 저항점 용접을 수행하였다. [1] 알루미늄 아세테이트 코팅 처리가 A6061 알루미늄 합금과 고장력 강판의 고상접합 계면의 접합강도에 미치는 영향을 파단면과 계면 미세조직을 SEM 관찰하여 조사하였다. [2]