Temperature Radiation(온도 복사)란 무엇입니까?
Temperature Radiation 온도 복사 - Under the time-varying temperature, the high-temperature radiation of forgings and the change of reflection characteristics of oxide skin on the surface of forgings lead to the difficulty of obtaining images to truly reflect the geometric characteristics of forgings. [1] It presents results of experimental studies on lab prototypes of electroplasma gates with electrical power of tens and hundreds kilowatts, which have demonstrated that in principle it is possible to use them as a basis for development of high-temperature radiation-proof voltage converters with mass fraction of ~0. [2] In this work, we have investigated the low-temperature radiation-induced transformations of a 1 : 1 CH4HCN complex as a plausible precursor of the simplest nitriles using the matrix isolation approach with FTIR spectroscopic detection. [3] Firstly, based on the high-temperature radiation of high-temperature alumina particles and the secondary combustion theory of unburned fuel, the flow field of the tail flame is simulated. [4] Increasing and stabilizing the coherence of superconducting quantum circuits and resonators is of utmost importance for various technologies, ranging from quantum information processors to highly sensitive detectors of low-temperature radiation in astrophysics. [5]시간에 따라 변하는 온도에서 단조품의 고온 복사와 단조품 표면의 산화물 스킨의 반사 특성 변화로 인해 단조품의 기하학적 특성을 실제로 반영하는 이미지를 얻기가 어렵습니다. [1] 수십 킬로와트 및 수백 킬로와트의 전력을 가진 전기 플라즈마 게이트의 실험실 프로토타입에 대한 실험 연구 결과를 제시하며, 이는 원칙적으로 이를 질량 분율을 갖는 고온 내방사선 전압 변환기 개발의 기초로 사용할 수 있음을 보여줍니다. ~0의 [2] 이 작업에서 우리는 FTIR 분광 검출을 통한 매트릭스 분리 접근 방식을 사용하여 가장 단순한 니트릴의 그럴듯한 전구체로서 1 : 1 CH4HCN 복합체의 저온 복사 유도 변형을 조사했습니다. [3] 첫째, 고온 알루미나 입자의 고온 복사와 미연 연료의 2차 연소 이론을 기반으로 꼬리 불꽃의 유동장을 시뮬레이션합니다. [4] 초전도 양자 회로 및 공진기의 일관성을 높이고 안정화하는 것은 양자 정보 프로세서에서 천체 물리학의 저온 복사에 대한 고감도 감지기에 이르기까지 다양한 기술에서 가장 중요합니다. [5]
Room Temperature Radiation 실온 복사
CdZnTe (CZT) has attracted a lot of attention for room temperature radiation detection by fulfilling a number of diverse and stringent requirements owing to its advantages over traditional semiconductor materials. [1] The detectors fabricated by the middle-to-freeze parts of both crystals had the best performance and can could meet the requirements of room temperature radiation detection. [2] Our results provide new essential information for developing such a new class of room temperature radiation detector material for a wide range of applications. [3] As a result, the new quaternary material Cd1−xZnxTe1−ySey (CZTS) is emerging as a next-generation room temperature radiation detector material with the potential to supersede CdZnTe, competing in both cost and detector performance. [4] Both material quality and detector performance have been steadily improving over the past few years for the leading room temperature radiation detector material cadmium-zinc-telluride (CdZnTe). [5] Thus, this material could be used for room temperature radiation detectors. [6] Lead iodide is one of the best room temperature radiation detector including applications in solar cell and photodetectors. [7] High-resolution room temperature radiation detection is now possible with the advancement in solid state semiconductor technology. [8] This can be used for room temperature radiation detection. [9]CdZnTe(CZT)는 기존 반도체 재료에 비해 장점이 있기 때문에 다양하고 엄격한 요구 사항을 충족함으로써 실온 복사 검출에 많은 관심을 받았습니다. [1] 두 결정의 중-동결 부분으로 제작된 탐지기는 최고의 성능을 보였고 실온 복사 탐지의 요구 사항을 충족할 수 있었습니다. [2] 우리의 결과는 광범위한 응용 분야를 위한 새로운 종류의 실온 방사선 검출기 재료를 개발하기 위한 새로운 필수 정보를 제공합니다. [3] 결과적으로, 새로운 4차 물질 Cd1−xZnxTe1−ySey(CZTS)는 비용과 검출기 성능 모두에서 경쟁하면서 CdZnTe를 대체할 잠재력을 가진 차세대 실온 방사선 검출기 재료로 부상하고 있습니다. [4] 재료 품질과 검출기 성능 모두 지난 몇 년 동안 선도적인 실온 방사선 검출기 재료인 카드뮴-아연-텔루라이드(CdZnTe)에 대해 꾸준히 개선되었습니다. [5] 따라서 이 물질은 상온 방사선 검출기에 사용될 수 있습니다. [6] 요오드화납은 태양 전지 및 광검출기의 응용 분야를 포함하여 최고의 실온 방사선 검출기 중 하나입니다. [7] 이제 고체 반도체 기술의 발전으로 고해상도 상온 방사선 검출이 가능해졌습니다. [8] 이것은 실온 복사 검출에 사용할 수 있습니다. [9]
Low Temperature Radiation
The devices can convert long wavelength infrared photons emitted from low temperature radiation sources (300 K-470 K) into electricity. [1] The value of detected radiation-induced effects is indicative of their significant role in the low temperature radiation embrittlement of ChS-139 steel. [2] The traceability of calibrations is validated by means of ITS-90 traceable low temperature radiation thermometer with a working bandwidth of 8-14µm. [3]이 장치는 저온 방사원(300K-470K)에서 방출되는 장파장 적외선 광자를 전기로 변환할 수 있습니다. [1] 검출된 방사선 유발 효과의 값은 ChS-139 강철의 저온 복사 취화에서 중요한 역할을 나타냅니다. [2] 교정의 추적 가능성은 8-14µm의 작업 대역폭을 가진 추적 가능한 저온 복사 온도계 ITS-90을 통해 검증됩니다. [3]
High Temperature Radiation
Nuclear reactor materials are known to be susceptible to hardening and embrittlement, irradiation-assisted stress corrosion cracking, and void swelling when exposed to high temperature radiation fields for long periods of time (Was and Andresen, 2012). [1] Additionally, four unique interatomic potentials were utilized to investigate uncertainties associated with potential choice in high temperature radiation damage studies in UO2. [2]원자로 재료는 고온의 복사장에 장기간 노출되면 경화 및 취화, 조사 보조 응력 부식 균열 및 보이드 팽창에 취약한 것으로 알려져 있습니다(Was and Andresen, 2012). [1] 또한 UO2의 고온 복사 손상 연구에서 잠재적 선택과 관련된 불확실성을 조사하기 위해 4개의 고유한 원자간 전위가 사용되었습니다. [2]
temperature radiation detector 온도방사선탐지기
In this article, we systematically review the advances in the CZTS growth techniques, its performance as room-temperature radiation detector, and the role of defects and their passivation studies needed to improve the performance of CZTS detectors further. [1] Our results provide new essential information for developing such a new class of room temperature radiation detector material for a wide range of applications. [2] As a result, the new quaternary material Cd1−xZnxTe1−ySey (CZTS) is emerging as a next-generation room temperature radiation detector material with the potential to supersede CdZnTe, competing in both cost and detector performance. [3] Both material quality and detector performance have been steadily improving over the past few years for the leading room temperature radiation detector material cadmium-zinc-telluride (CdZnTe). [4] Thus, this material could be used for room temperature radiation detectors. [5] Lead iodide is one of the best room temperature radiation detector including applications in solar cell and photodetectors. [6] CdZnTe (CZT) has been under continuous development as a room-temperature radiation detector for the past 2–3 decades. [7]이 기사에서 우리는 CZTS 성장 기술의 발전, 실온 방사선 검출기로서의 성능, CZTS 검출기의 성능을 더욱 향상시키는 데 필요한 결함의 역할 및 패시베이션 연구를 체계적으로 검토합니다. [1] 우리의 결과는 광범위한 응용 분야를 위한 새로운 종류의 실온 방사선 검출기 재료를 개발하기 위한 새로운 필수 정보를 제공합니다. [2] 결과적으로, 새로운 4차 물질 Cd1−xZnxTe1−ySey(CZTS)는 비용과 검출기 성능 모두에서 경쟁하면서 CdZnTe를 대체할 잠재력을 가진 차세대 실온 방사선 검출기 재료로 부상하고 있습니다. [3] 재료 품질과 검출기 성능 모두 지난 몇 년 동안 선도적인 실온 방사선 검출기 재료인 카드뮴-아연-텔루라이드(CdZnTe)에 대해 꾸준히 개선되었습니다. [4] 따라서 이 물질은 상온 방사선 검출기에 사용될 수 있습니다. [5] 요오드화납은 태양 전지 및 광검출기의 응용 분야를 포함하여 최고의 실온 방사선 검출기 중 하나입니다. [6] CdZnTe(CZT)는 지난 2-30년 동안 실온 방사선 검출기로 지속적으로 개발되었습니다. [7]
temperature radiation detection 온도 복사 감지
CdZnTe (CZT) has attracted a lot of attention for room temperature radiation detection by fulfilling a number of diverse and stringent requirements owing to its advantages over traditional semiconductor materials. [1] The detectors fabricated by the middle-to-freeze parts of both crystals had the best performance and can could meet the requirements of room temperature radiation detection. [2] 99999%) purity elemental precursors for room-temperature radiation detection. [3] High-resolution room temperature radiation detection is now possible with the advancement in solid state semiconductor technology. [4] This can be used for room temperature radiation detection. [5]CdZnTe(CZT)는 기존 반도체 재료에 비해 장점이 있기 때문에 다양하고 엄격한 요구 사항을 충족함으로써 실온 복사 검출에 많은 관심을 받았습니다. [1] 두 결정의 중-동결 부분으로 제작된 탐지기는 최고의 성능을 보였고 실온 복사 탐지의 요구 사항을 충족할 수 있었습니다. [2] 실온 방사선 검출을 위한 99999%) 순도 원소 전구체. [3] 이제 고체 반도체 기술의 발전으로 고해상도 상온 방사선 검출이 가능해졌습니다. [4] 이것은 실온 복사 검출에 사용할 수 있습니다. [5]
temperature radiation hardening
According to the obtained results, it can be supposed that the formation of dislocation loops plays the main role in the low-temperature radiation hardening of Eurofer 97 at a dose level up to ~10 dpa. [1] Low-temperature radiation hardening of prospective structural steel Eurofer 97 as the material for the first wall of the DEMO fusion reactor is studied in this work. [2] Radiation-induced degradation processes include low-temperature radiation hardening and embrittlement, radiation-modified solute segregation and precipitation, radiation- and stress-modified corrosion and cracking, dimensional instabilities associated with void swelling, irradiation creep and radiation growth, and high-temperature helium embrittlement. [3]얻어진 결과에 따르면 전위 루프의 형성은 최대 ~10dpa의 선량 수준에서 Eurofer 97의 저온 방사선 경화에 주요 역할을 한다고 가정할 수 있습니다. [1] 이 연구에서는 DEMO 핵융합로의 첫 번째 벽 재료로 예상되는 구조용 강철 Eurofer 97의 저온 방사선 경화를 연구합니다. [2] 방사선 유발 분해 과정에는 저온 방사선 경화 및 취화, 방사선 수정 용질 분리 및 침전, 방사선 및 응력 수정 부식 및 균열, 보이드 팽창과 관련된 치수 불안정성, 방사선 크리프 및 방사선 성장, 고온 헬륨이 포함됩니다. 취화. [3]
temperature radiation embrittlement
The classification of physical models of plastic deformation localization phenomena in the temperature range including the low-temperature radiation embrittlement effect is done. [1] The value of detected radiation-induced effects is indicative of their significant role in the low temperature radiation embrittlement of ChS-139 steel. [2]저온 복사 취화 효과를 포함하는 온도 범위에서 소성 변형 국부화 현상의 물리적 모델 분류가 수행됩니다. [1] 검출된 방사선 유발 효과의 값은 ChS-139 강철의 저온 복사 취화에서 중요한 역할을 나타냅니다. [2]
temperature radiation source
However, a low-temperature radiation source has very weak IR radiation which is easily submerged in noise. [1] The devices can convert long wavelength infrared photons emitted from low temperature radiation sources (300 K-470 K) into electricity. [2]그러나 저온 방사원은 노이즈에 쉽게 잠기는 매우 약한 IR 방사를 가지고 있습니다. [1] 이 장치는 저온 방사원(300K-470K)에서 방출되는 장파장 적외선 광자를 전기로 변환할 수 있습니다. [2]