Surface Structural(표면 구조)란 무엇입니까?
Surface Structural 표면 구조 - The present work focused on surface structural and electric structural properties of the anatase TiO2 doped with some 3d transition metals (Mn, Fe and Co). [1] The surface structural, biodegradability, mechanical, transmittance, antibacterial and preservation properties of the CSC films were investigated, considering the effects of CMS-LS-CO concentration. [2]현재 연구는 일부 3d 전이 금속(Mn, Fe 및 Co)으로 도핑된 아나타제 TiO2의 표면 구조 및 전기 구조적 특성에 초점을 맞췄습니다. [1] CMS-LS-CO 농도의 영향을 고려하여 CSC 필름의 표면 구조, 생분해성, 기계적, 투과율, 항균성 및 보존성을 조사하였다. [2]
Near Surface Structural 표면 구조 근처
We assess the potential of rotational ground motions to resolve time-dependent near surface structural heterogeneities using noise correlations. [1] Deep and near surface structural peculiarities influence on these areas’ geodynamics and allow establishing possible levels of seismic energy releasing. [2]우리는 소음 상관 관계를 사용하여 시간에 따른 표면 근처의 구조적 이질성을 해결하기 위해 회전하는 지반 운동의 잠재력을 평가합니다. [1] 깊고 가까운 표면 구조적 특성은 이 지역의 지구 역학에 영향을 미치고 가능한 수준의 지진 에너지 방출을 설정합니다. [2]
surface structural change 표면 구조 변경
Using nanoscale infrared spectroscopy and reactive molecular dynamics simulations, the subsurface structural changes of silica upon nanoindentation and nanoscratch are investigated. [1] 6% recovery for 25 kg sample with no major surface structural changes compared with Natural Vein Graphite, indicating that it could be applied on commercial scale with periodic iterations for upgrading over 99% fixed carbon. [2] These aged adsorbents will be analyzed for chemical and structural changes using several characterization techniques including scanning and transmission electron microscopy (SEM and TEM) for surface structural changes, BET (Brunauer, Emmett, and Teller) analysis for surface area and porosity changes, mercury porosimetry for pore distribution changes, X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) to determine the amount of reduced silver converted to silver ions, X-ray absorption fine structure (XAFS) and pair density function (PDF) to determine the chemical environment of Ag, and X-ray photoelectron spectroscopy (XPS) for surface elemental analysis to determine amounts of Ag, Ag2O, AgNO2, AgNO3 and other formed compounds and estimate their impact on aging. [3] The effect of surface structural change on the adsorption behavior of In adatom during the growth of InAs wetting layer (WL) on GaAs(001) substrate is theoretically investigated on the basis of ab initio calculations and Monte Carlo (MC) simulations. [4] An airgun source in a water reservoir has been developed in the past decade as a green active source that had been proven effective to derive short-term subsurface structural changes. [5] These results lay out the pavement to comprehensively investigate fault zone structures as well as to derive subsurface structural changes using dense arrays and the airgun source. [6] The surface structural changes after each modification step were studied by Fourier transform infrared spectroscopy-attenuated total reflectance and X-ray photoelectron spectroscopy (XPS). [7] The surface structural change of BSA and activated carbon was studied before and after the experiment using scanning electron microscopy (SEM) analysis and Fourier Transform Infrared Spectroscopy (FTIR). [8] The surface structural change of lipase enzyme and activated carbon was studied. [9] These new high-performance graphene-based optical sensors are able to detect surface structural changes and biomolecular interactions. [10]나노 스케일 적외선 분광법 및 반응성 분자 역학 시뮬레이션을 사용하여 나노 압입 및 나노 스크래치 시 실리카의 표면 아래 구조 변화를 조사합니다. [1] 천연 광맥 흑연과 비교하여 주요 표면 구조적 변화가 없는 25kg 샘플에 대해 6% 회수율은 99% 이상의 고정 탄소 업그레이드를 위한 주기적인 반복으로 상업적 규모에 적용될 수 있음을 나타냅니다. [2] nan [3] nan [4] nan [5] nan [6] nan [7] nan [8] nan [9] nan [10]
surface structural feature 표면 구조적 특징
Analysis of Full Tensor Gravity anomalies helps in understanding of the nature of shallow subsurface structural features and has a paramount importance in building general understanding of subtle details about subsurface geology of the area. [1] The work also includes the documentation of several surface structural features, i. [2] The surface structural features and compositions of the O-ECM/PLLA/SF scaffold were characterized by SEM and immunofluorescence staining. [3] This study delineates surface and subsurface structural features in the hard rock terrain of Osun State using magnetic data and satellite remote sensing imageries. [4] The time contour maps indicate the existence of subsurface structural features in the study area. [5] The study presents a workflow for better visualization of the subsurface structural features which thereby helps in detailed structural interpretation of the seismic data. [6] In this work, we explore the quantification of surface structural features and establish a database of atomic strain distributions for the late-transition metal HIF nanoparticle models. [7] This study investigated the ice velocity changes of the northern Larsen Ice Shelf as well as its relationship with the distribution of surface structural features using Landsat images acquired in the late 1980s and the early 2000s. [8]전체 텐서 중력 이상에 대한 분석은 얕은 지하 구조 특징의 특성을 이해하는 데 도움이 되며 해당 지역의 지하 지질학에 대한 미묘한 세부 사항에 대한 일반적인 이해를 구축하는 데 가장 중요합니다. [1] 이 작업에는 여러 표면 구조적 특징에 대한 문서화도 포함됩니다. i. [2] O-ECM/PLLA/SF 지지체의 표면 구조적 특징과 구성은 SEM 및 면역형광 염색으로 특성화되었습니다. [3] 이 연구는 자기 데이터와 위성 원격 감지 이미지를 사용하여 Osun 주의 단단한 암석 지형의 표면 및 지하 구조적 특징을 설명합니다. [4] 시간 등고선 지도는 연구 지역의 지하 구조적 특징의 존재를 나타냅니다. [5] 이 연구는 지진 데이터의 상세한 구조 해석에 도움이 되는 지하 구조 특징의 더 나은 시각화를 위한 워크플로를 제시합니다. [6] 이 작업에서 우리는 표면 구조적 특징의 정량화를 탐색하고 후기 전이 금속 HIF 나노입자 모델에 대한 원자 변형률 분포의 데이터베이스를 구축합니다. [7] nan [8]
surface structural property 표면 구조 특성
Optimizing the catalytic performance of multimetallic nanoparticle (NP) catalysts demands a concrete understanding of their design, while preferentially deploying wet chemical synthesis procedures to precisely control surface structural properties. [1] We focus on the stability and bulk/surface structural properties of the Ruddlesden-Popper phase La2NiO4 and their consequences for dry reforming of methane (DRM) activity. [2] Our results suggest that the activity of the photocatalyst/cement is overwhelmingly governed by the active TiO2/cement interfaces rather than the intrinsic surface structural properties of photocatalysts. [3] Summary This paper presents a study on geophysical inverse modelling for subsurface structural properties of an unconventional hydrocarbon site that was monitored previously by Interferometric Synthetic Aperture Radar (InSAR) technology for surface deformation. [4] The prepared catalysts were characterized by FT-IR, XRD, and SEM to determine the crystal and surface structural properties of nanocomposites. [5] In this work, the effects of aging temperature and time on the high tenacity polyester yarn’s mechanical and surface structural properties were investigated. [6] Replicating the surface of the osteoinductive ceramic in polystyrene resulted in a significant decrease in ENPP1 expression, suggesting that surface structural properties alone are not sufficient to induce ENPP1 expression. [7]다중금속 나노입자(NP) 촉매의 촉매 성능을 최적화하려면 설계에 대한 구체적인 이해가 필요하며 표면 구조적 특성을 정밀하게 제어하기 위해 습식 화학 합성 절차를 우선적으로 적용합니다. [1] 우리는 Ruddlesden-Popper 상 La2NiO4의 안정성과 벌크/표면 구조적 특성과 메탄(DRM) 활동의 건식 개질에 대한 결과에 중점을 둡니다. [2] 우리의 결과는 광촉매/시멘트의 활성이 광촉매의 고유한 표면 구조적 특성보다 활성 TiO2/시멘트 계면에 의해 압도적으로 지배된다는 것을 시사합니다. [3] nan [4] nan [5] nan [6] nan [7]
surface structural stability 표면 구조적 안정성
This multiscale design can significantly improve the bulk and surface structural stability and diffusion rate of Li+ ions of electrode materials. [1] Moreover, the chemical stability of the catalyst, including its bulk and surface structural stability, was investigated by combining intensive treatment with HCl/H2O or HCl with subsequent ex situ ultraviolet-visible light Raman spectroscopy and confirmed the superior resistance to Cl poisoning of the phosphate-functionalized RuOx-CeO2. [2] Furthermore, Nb doping also promotes the surface rearrangement to form a Ni-enrichment layered/rocksalt heterogeneous interface to enhance surface structural stability. [3] From the beginning of the weathering process, the heat treatment affected the surface structural stability. [4] We find that the Li2GeO3 coating inhibits interfacial side reactions to enhance the surface structural stability of the cathode materials. [5]이 멀티스케일 디자인은 전극 재료의 Li+ 이온의 벌크 및 표면 구조적 안정성과 확산 속도를 크게 향상시킬 수 있습니다. [1] 또한, 촉매의 벌크 및 표면 구조적 안정성을 포함한 화학적 안정성은 HCl/H2O 또는 HCl에 대한 집중 처리와 후속 ex-situ 자외선-가시광선 라만 분광법을 결합하여 조사되었으며 인산염의 Cl 중독에 대한 우수한 내성을 확인했습니다. -기능화된 RuOx-CeO2. [2] nan [3] nan [4] nan [5]
surface structural information 표면 구조 정보
Seismic images are data collected by sending seismic waves to the earth subsurface, recording the reflection and providing subsurface structural information. [1] Optical Coherence Tomography (OCT) provides sub-surface structural information and offers diagnosis capabilities of colon polyps, further improved by machine learning methods. [2] The idea of ionoluminescence 3-D imaging is introduced to provide surface structural information of luminescent samples from a depth of tens of micrometers. [3] Both bulk and surface structural information are discussed in terms of the dissolution and corrosion mechanisms of ISG and related nuclear waste glasses. [4] subsurface structural information via magnetics or fine tuning the interpretation of mineral chemistry using radioelement data. [5]지진 영상은 지진파를 지표면으로 보내 반사를 기록하고 지표면 아래 구조 정보를 제공하여 수집된 데이터입니다. [1] OCT(Optical Coherence Tomography)는 표면 아래 구조 정보를 제공하고 결장 폴립의 진단 기능을 제공하며 기계 학습 방법으로 더욱 향상되었습니다. [2] nan [3] nan [4] nan [5]
surface structural setting 표면 구조 설정
The past seismic history and the current activity emphasize the need to revisit the subsurface structural setting and its association with the seismicity of the region. [1] This paper analyzed satellite and aeromagnetic data over Osun State, Southwestern, Nigeria with a view to assessing the surface and subsurface structural settings that may favour mineralization in the study area. [2] Three hundred magnetic points were measured and analyzed to evaluate the subsurface structural setting and to trace the basement relief, which control the aquifer’s geometry. [3] Based on this consideration, we examined the subsurface structural setting of the Marche Region (Central Italy) in terms of detailed data we obtained on the groundwater in wells; detailed analyses of its physical properties, particularly electrical conductivity, revealed some anomalies in several localities which appear to be related to the local tectonic structures. [4]과거 지진 역사와 현재 활동은 지하 구조 설정 및 해당 지역의 지진과의 연관성을 재검토할 필요성을 강조합니다. [1] 이 논문은 연구 지역의 광물화에 유리한 표면 및 지하 구조 설정을 평가하기 위해 나이지리아 남서부 오순 주의 위성 및 항공자기 데이터를 분석했습니다. [2] nan [3] nan [4]
surface structural element 표면 구조 요소
This study is aimed to delineate the subsurface structural elements using geophysical techniques in the Haraza area of Pakistan. [1] The processed and interpreted aeromagnetic data helped effectively for the detection of the deep subsurface and near-surface structural elements affecting the area and inspection favorable sites of mineralization that give strong magnetization of which chromite bodies associated with serpentinite rocks. [2] Shells have larger stiffness and strength compared with plane surface structural elements which ensure minimum material and maximum structural performance. [3] By scanning electron microscopy (SEM), the influence of sub-surface structural elements on the properties of micro-milling workpiece was analyzed. [4]본 연구는 파키스탄의 하라자 지역에서 지구물리학적 기법을 이용하여 지하구조요소를 기술하는 것을 목적으로 한다. [1] 처리 및 해석된 항공자기 데이터는 해당 지역에 영향을 미치는 깊은 지하 및 표면 근처의 구조 요소를 탐지하고 구불구불한 암석과 관련된 크롬철광체의 강한 자화를 제공하는 광물화의 유리한 위치를 검사하는 데 효과적으로 도움이 되었습니다. [2] nan [3] nan [4]
surface structural datum 표면 구조 기준
The procedure was conducted through the use of a 2d seismic line bounded with new wells and SRTM imagery, to combine subsurface structural data with the surface fundamental analogue. [1] At the same time advanced implicit modelling techniques were used to integrate borehole and surface structural data in a 3D structural model. [2] The main findings include: (a) The DCR measurements can be considered as a complementary tool to visualize the relationship between subsurface structures and aquifers geometry at highly deformed areas; (b) detailed surface structural data analysis combined with sophisticated inversion algorithms application can increase the reliability of the constructed geo-electrical cross sections for deep and large-scale geological surveys; and (c) the structural modeling of geological units and faults distribution contributes to clarify hydrogeological settings and aquifers connectivity. [3]이 절차는 지하 구조 데이터를 표면 기본 유사체와 결합하기 위해 새로운 유정 및 SRTM 이미지로 경계를 이루는 2차원 지진선을 사용하여 수행되었습니다. [1] 동시에 고급 암시적 모델링 기술을 사용하여 시추공 및 표면 구조 데이터를 3D 구조 모델에 통합했습니다. [2] nan [3]
surface structural defect 표면 구조적 결함
The PdCo-ZnAl sample was the most active and exhibited highly dispersed PdOx particles and surface structural defects. [1] In this study, the effects of ion beam etching on surface/subsurface structural defect evolution of fused silica optics were investigated. [2] The origin of the observed broad luminescence band peaking in the range 480–500 nm can be understood in terms of surface structural defects, the particle size, and the broad particle size distribution. [3]PdCo-ZnAl 샘플은 가장 활성이 높았고 PdOx 입자가 고도로 분산되어 있고 표면 구조적 결함이 있었습니다. [1] 이 연구에서 이온빔 에칭이 용융 실리카 광학계의 표면/표면 구조적 결함 발생에 미치는 영향을 조사했습니다. [2] nan [3]
surface structural geology 표면 구조 지질학
The development of a method to enhance resolution in imaging subsurface structural geology has continuously developed. [1] Interpretation of existent active seismic data collected during previous hydrocarbon exploration will provide information about the subsurface structural geology. [2] This geophysical survey was aimed at studying and investigating the tectonic setting/situation, subsurface structural geology and hydrocarbon potential of the area. [3]지하 구조 지질학 이미징에서 해상도를 향상시키는 방법의 개발은 지속적으로 개발되었습니다. [1] 이전 탄화수소 탐사 동안 수집된 기존 활성 지진 데이터의 해석은 지하 구조 지질학에 대한 정보를 제공할 것입니다. [2] nan [3]
surface structural model 표면 구조 모델
For this purpose, we here calculated GFs based on a numerical model that is of high fidelity to obtain realistic topography and subsurface structural models of the Earth. [1] The experimental results have been interpreted at the atomic level by exploiting reliable bulk and surface structural models of the investigated glass generated by using Molecular Dynamics Simulations. [2] Interlayer and surface Ir-modified Pt/Pd(111) model catalyst surfaces [Pt/Ir/Pd(111) and Ir/Pt/Pd(111)] were synthesized as surface structural models for third element-modified core–shell-type Pd@P. [3]이를 위해 우리는 현실적인 지형과 지구의 지하 구조 모델을 얻기 위해 충실도가 높은 수치 모델을 기반으로 GF를 계산했습니다. [1] 실험 결과는 분자 역학 시뮬레이션을 사용하여 생성된 조사된 유리의 신뢰할 수 있는 벌크 및 표면 구조 모델을 활용하여 원자 수준에서 해석되었습니다. [2] nan [3]
surface structural evolution
Moreover, less Ni content on the material surface is beneficial for reducing the formation of a NiO rock salt phase during the charging process and inhibits the surface structural evolution. [1] The synergistic effects between the CoFeP and N-doped carbon has led to high electronic conductivity attributed to the optimal Fe contents with N-doped carbon and enlarged electrocatalytic active surface area aroused by the nanostructure of CoFeP/NC, as well as the surface structural evolution of oxyhydroxide/phosphate during OER process. [2]surface structural reconstruction
Precisely surface structural reconstruction through foreign element doping is a potential method to alleviate IPT propagation. [1] The study demonstrates a metastable intermediate state of sulfide electrolyte at high voltage and parasitic reactions with cathodes during the charge/discharge process, which leads to the surface structural reconstruction of Ni-rich cathodes. [2]외부 원소 도핑을 통한 정확한 표면 구조 재구성은 IPT 전파를 완화할 수 있는 잠재적인 방법입니다. [1] nan [2]
surface structural interpretation
The study provides a starting point to apply unsupervised machine learning approaches to sub-surface structural interpretation workflows. [1] This book presents issues related to (i) evaluation system of students using the peers, (ii) use of new instruments in measuring structural data from rocks, (iii) paleomagnetic studies in tectonics, (iv) sub-surface structural interpretations required in industries, (v) field studies in structural geology, (vi) interdisciplinary aspects of structural geology, (vii) teaching structural geology and tectonics in Indian context, (viii) conducting practical classes in structural geology with map interpretations and (ix) and simple geomechanical problems and solutions. [2]surface structural morphology 표면 구조 형태
The surface structural morphology, chemical, elemental, and mineralogical features, as well as functional group interaction of the polyvinyl pyrrolidone (PVP) with the AlNiMn nanomaterial, were ascertained with Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-ray Spectroscopy (EDX), X-ray dispersive (XRD), Fourier Transform Infra-red spectroscopy (FTIR). [1] The surface structural morphology of as-prepared catalyst is thoroughly characterized by XRD, DLS particle size, SEM, TEM-EDS, TGA, TPD, BET surface area (80 m2g−1) analysis, adsorption and electro-kinetic (zeta potential/point of zero charge) properties etc. [2]폴리비닐피롤리돈(PVP)과 AlNiMn 나노물질의 작용기 상호작용뿐만 아니라 표면 구조적 형태, 화학적, 원소 및 광물학적 특징을 전계 방출 주사 전자 현미경(FESEM), 에너지 분산 X선 분광기(Energy Dispersive X-ray Spectroscopy)로 확인했습니다. EDX), X선 분산(XRD), 푸리에 변환 적외선 분광법(FTIR). [1] 준비된 촉매의 표면 구조적 형태는 XRD, DLS 입자 크기, SEM, TEM-EDS, TGA, TPD, BET 표면적(80 m2g-1) 분석, 흡착 및 동전기(제타 전위/점 무전하) 속성 등 [2]
surface structural color 표면 구조 색상
This report details a deep learning approach to the forward and inverse designs of plasmonic metasurface structural color. [1] At present, the design of metasurface structural color based on dielectric materials is mostly carried out by manually adjusting parameters. [2]이 보고서는 플라즈몬 메타표면 구조 색상의 정방향 및 역방향 설계에 대한 딥 러닝 접근 방식을 자세히 설명합니다. [1] 현재 유전체 재료를 기반으로 한 메타표면 구조 색상의 설계는 대부분 수동으로 매개변수를 조정하여 수행됩니다. [2]
surface structural characteristic 표면 구조 특성
Subsurface runoff over less-permeable soil layers, governed by the subsurface structural characteristics, was identified as the dominant subsurface flow process contributing to fluxes out of the fields. [1] In this paper, a new method of obtaining belt grinding allowance data of a hollow blade based on blue light scanning was proposed according to complex surface structural characteristics of a hollow blade and surface contact characteristics of belt grinding. [2]지하 구조적 특성에 의해 지배되는 투과성이 낮은 토양층 위의 지하 유출수는 현장에서 유출되는 흐름에 기여하는 지배적인 지하 흐름 과정으로 확인되었습니다. [1] 본 논문에서는 중공 날의 복잡한 표면 구조 특성과 벨트 연삭의 표면 접촉 특성에 따라 청색광 스캐닝을 기반으로 중공 날의 벨트 연삭 여유 데이터를 얻는 새로운 방법을 제안하였다. [2]
surface structural design 표면 구조 설계
Our work provides insights into the surface structural design of an orthopedic implant favoring osseointegration. [1] The lunar environment presents numerous challenges to surface structural designs as well as human survival. [2]우리의 연구는 골유착을 선호하는 정형외과 임플란트의 표면 구조 설계에 대한 통찰력을 제공합니다. [1] 달 환경은 인간의 생존뿐만 아니라 표면 구조 설계에 대한 수많은 도전을 제시합니다. [2]