Superconducting Films(초전도 필름)란 무엇입니까?
Superconducting Films 초전도 필름 - Pristine REBa2Cu3O7−δ (REBCO, RE with Yb, Y, Dy, Gd, Eu and Sm) superconducting films are deposited on CeO2 buffered technical substrates by fluorine-free metal organic decomposition (FF-MOD) method. [1] For superconducting films with 26. [2] We report a novel doping strategy for YBa2Cu3O7-x (YBCO) superconducting films by using a positive mismatch, Ba2YNbO6 (BYNO), and a negative mismatch, LaAlO3 (LAO), simultaneously. [3] This work focused on electrochemical and optical properties of yttrium barium copper oxide (YBCO) and Ag-doped YBCO (Ag-YBCO) as superconducting films. [4] Our method presents a viable and simple way to fabricate hybrid Josephson junctions between superconducting films and two-dimensional (2D) vdW superconducting materials, which might offer a chance for widespread applications. [5] Here we explore an approach of depositing magnetic nanoparticles on the surface of superconducting films, which neither reduce the volume of the superconductor nor create high-angle grain boundaries. [6] In the previous four decades, the two-coil mutual inductance (MI) technique has been widely employed in characterizing magnetic penetration depth, λ , of superconducting films. [7] The successful preparation of this freestanding GdBa2Cu3O7-x film with high critical current density makes the application of superconducting films more extensive and flexible. [8] It has been shown that beryllium bronze contacts can provide efficient heat removal from samples of superconducting films in a resistive state under conditions of strong Joule heat release. [9] In superconducting films, the clustering takes place because of particular properties of the vortex interactions in the crossover or intertype regime between superconductivity types I and II. [10] The growth parameters of textured LMO films were studied systematically and their properties were optimized regarding the critical current density (J c) of the subsequently deposited DyBa2Cu3O7−δ (DyBCO) superconducting films. [11] The principle of the amorphous oxide is basically the same as that of the crystalline state, Magnetron sputtering technology can prepare super-hard films, corrosion-resistant friction films, superconducting films, magnetic films, optical films, and various films with special functions. [12] We have built a Terahertz Dispersive Fourier Transform Spectrometer1 to study frequency properties of superconducting films used for fabrication of THz detectors. [13] Hybrid nanostructures combining artificially fabricated spin ice nanomagnet arrays with superconducting films have been identified as a good choice to develop ratchet nanodevices. [14] It is shown that beryllium bronze contacts can provide an effective heat removal from samples of superconducting films in the resistive state under the conditions of a strong Joule heat release. [15] Nonetheless we obtained quite promising results by incorporating such particles in superconducting films. [16] Resistance versus temperature characteristics of superconducting films have been studied for decades, and are still considered an important subject of condensed matter physics. [17] thesis is based on the experimental study of two mutually interconnected phenomena: intrinsic timing jitter in superconducting nanowire single-photon detectors (SNSPDs) and relaxation of the electron energy in superconducting films. [18] The effects of both anisotropy in the substrates and the superconducting films on the resonant frequencies and radiation patterns of an equilateral triangular patch are investigated theoretically. [19] Magneto-optical microscopy for superconducting films is always involved with extreme environments, such as high vacuum and cryogenic temperature. [20] 1CuO4 (LCCO) superconducting films has been studied. [21] Superconducting films are usually regarded as type II superconductors even when they are made of a type I material. [22] Types of flux pinning mechanism in pure and BaSnO3 (BSO)-added GdBa2Cu3O7-x (GdBCO) superconducting films have been determined by using the Dew-Hughes model. [23] Our results show that the appearance of temperature-independent, metallic-like transport at low temperatures is sufficiently described by the extreme sensitivity of these superconducting films to external perturbations. [24] In this work, we review the recent advances on the magnetic recording of inhomogeneous magnetic landscapes produced by superconducting films. [25] In this view, we present an experimental investigation of the millimeter-wave response in moderate magnetic fields of Tl$_2$Ba$_2$CaCu$_2$O$_{8+x}$ superconducting films with the aim of identifying the mechanisms of the vortex-motion-induced response. [26] Separate experiments were carried out to evaluate the validity of the proposed theory of Eliash'berg for superconducting films in a microwave field, without reaching a full quantitatively reliable measurement of the stimulated energy gap in a microwave-field, but convincing enough to understand the earlier deviations of the Josephson-effect. [27]깨끗한 REBa2Cu3O7-δ(REBCO, Yb, Y, Dy, Gd, Eu 및 Sm이 있는 RE) 초전도 필름은 FF-MOD(불소 금속 유기 분해) 방법에 의해 CeO2 완충 기술 기판에 증착됩니다. [1] 26의 초전도 필름용. [2] 우리는 양의 불일치인 Ba2YNbO6(BYNO)와 음의 불일치인 LaAlO3(LAO)를 동시에 사용하여 YBa2Cu3O7-x(YBCO) 초전도 필름에 대한 새로운 도핑 전략을 보고합니다. [3] 이 연구는 초전도 필름으로서 이트륨 바륨 구리 산화물(YBCO) 및 Ag 도핑된 YBCO(Ag-YBCO)의 전기화학적 및 광학적 특성에 초점을 맞췄습니다. [4] 우리의 방법은 초전도 필름과 2차원(2D) vdW 초전도 물질 사이의 하이브리드 조셉슨 접합을 제작하는 실행 가능하고 간단한 방법을 제시하며, 이는 광범위한 응용 분야에 기회를 제공할 수 있습니다. [5] 여기에서 우리는 초전도체의 부피를 줄이지 않고 고각 결정립계를 생성하지 않는 초전도 필름 표면에 자기 나노입자를 증착하는 접근 방식을 탐구합니다. [6] 지난 40년 동안 2코일 상호 인덕턴스(MI) 기술은 초전도 필름의 자기 침투 깊이(λ)를 특성화하는 데 널리 사용되었습니다. [7] 임계 전류 밀도가 높은 이 독립형 GdBa2Cu3O7-x 필름의 성공적인 준비는 초전도 필름의 적용을 보다 광범위하고 유연하게 만듭니다. [8] 베릴륨 청동 접점은 강한 줄 열 방출 조건에서 저항성 상태의 초전도 필름 샘플에서 효율적인 열 제거를 제공할 수 있는 것으로 나타났습니다. [9] 초전도 필름에서 클러스터링은 초전도 유형 I 및 II 간의 교차 또는 유형 간 영역에서 와류 상호 작용의 특정 속성으로 인해 발생합니다. [10] 조직화된 LMO 필름의 성장 매개변수를 체계적으로 연구하고 후속 증착된 DyBa2Cu3O7-δ(DyBCO) 초전도 필름의 임계 전류 밀도(J c )와 관련하여 특성을 최적화했습니다. [11] 비정질 산화물의 원리는 기본적으로 결정 상태의 원리와 동일하며, 마그네트론 스퍼터링 기술은 초경질막, 내식성 마찰막, 초전도막, 자성막, 광학막 및 다양한 특수 기능의 막을 제조할 수 있습니다. [12] 우리는 THz 검출기 제작에 사용되는 초전도 필름의 주파수 특성을 연구하기 위해 테라헤르츠 분산 푸리에 변환 분광계1를 구축했습니다. [13] 인공적으로 제작된 스핀 얼음 나노자석 어레이와 초전도 필름을 결합한 하이브리드 나노구조는 래칫 나노소자를 개발하기 위한 좋은 선택으로 확인되었습니다. [14] 베릴륨 청동 접점은 강한 줄 열 방출 조건에서 저항성 상태의 초전도 필름 샘플에서 효과적인 열 제거를 제공할 수 있음을 보여줍니다. [15] 그럼에도 불구하고 우리는 초전도 필름에 이러한 입자를 통합하여 매우 유망한 결과를 얻었습니다. [16] 초전도 필름의 저항 대 온도 특성은 수십 년 동안 연구되어 왔으며 여전히 응집 물질 물리학의 중요한 주제로 간주됩니다. [17] 이 논문은 초전도 나노와이어 단일 광자 검출기(SNSPD)의 고유 타이밍 지터와 초전도 필름의 전자 에너지 이완이라는 상호 연결된 두 가지 현상에 대한 실험적 연구를 기반으로 합니다. [18] 정삼각형 패치의 공진 주파수와 복사 패턴에 대한 기판과 초전도막의 이방성이 미치는 영향을 이론적으로 조사합니다. [19] 초전도 필름에 대한 자기 광학 현미경은 항상 고진공 및 극저온과 같은 극한 환경과 관련됩니다. [20] 1CuO4(LCCO) 초전도 필름이 연구되었습니다. [21] 초전도 필름은 유형 I 물질로 만들어지더라도 일반적으로 유형 II 초전도체로 간주됩니다. [22] 순수 및 BaSnO3(BSO)가 첨가된 GdBa2Cu3O7-x(GdBCO) 초전도 필름에서 플럭스 고정 메커니즘의 유형은 Dew-Hughes 모델을 사용하여 결정되었습니다. [23] 우리의 결과는 저온에서 온도 독립적인 금속과 같은 수송의 출현이 외부 섭동에 대한 이러한 초전도 필름의 극도의 감도에 의해 충분히 설명된다는 것을 보여줍니다. [24] 이 연구에서 우리는 초전도 필름에 의해 생성된 비균질 자기 풍경의 자기 기록에 대한 최근의 발전을 검토합니다. [25] 이 관점에서 우리는 메커니즘을 식별하기 위해 Tl$_2$Ba$_2$CaCu$_2$O$_{8+x}$ 초전도 필름의 중간 자기장에서 밀리미터파 응답에 대한 실험적 조사를 제시합니다. 소용돌이 운동 유도 반응. [26] 마이크로파 필드의 자극된 에너지 갭에 대한 정량적으로 신뢰할 수 있는 측정에 완전히 도달하지 않고 마이크로파 필드의 초전도 필름에 대해 제안된 Eliash'berg 이론의 타당성을 평가하기 위해 별도의 실험이 수행되었지만 이전을 이해하기에 충분히 설득력이 있었습니다. 조셉슨 효과의 편차. [27]
Thin Superconducting Films
Measurements of the frequency shift δf of a microwave dielectric resonator, brought into contact with the sample, as a function of temperature and dAl showed that (i) the character of the dependence δf(T) depends strongly on dAl and (ii) the resonance frequency shift of SN structures at temperatures close to the critical temperature Tc is not described by dependence const/(1 – T/Tc), which is typical of thin superconducting films. [1] This work gives new insights into the non-equilibrium dynamics of thin superconducting films exposed to electromagnetic radiation. [2] Chapter 4 explores how nanofabrication techniques and careful consideration of the properties of thin superconducting films can be used to engineer superconducting co-planar waveguide resonators that remain operational in strong parallel magnetic fields of \SI{6}{\tesla} and perpendicular magnetic fields of \SI{20}{\milli \tesla}, an order of magnitude greater than previously reported. [3] Resistive domains in the thin superconducting films deposited on wide substrates are analyzed in the frame of a stepwise voltage–current characteristic of superconductors. [4] We used epitaxial growth of YBCO on ⟨110⟩ SrTiO3 substrates by pulsed laser deposition to prepare thin superconducting films with copper oxide planes oriented at an angle to the substrate surface. [5]온도 및 dAl의 함수로서 샘플과 접촉하게 된 마이크로파 유전체 공진기의 주파수 이동 δf의 측정은 (i) 의존성 δf(T)의 특성이 dAl 및 (ii) 공진에 크게 의존함을 보여주었습니다. 임계 온도 Tc에 가까운 온도에서 SN 구조의 주파수 이동은 초전도 박막의 전형인 종속성 const/(1 – T/Tc)로 설명되지 않습니다. [1] 이 연구는 전자기 복사에 노출된 얇은 초전도 필름의 비평형 역학에 대한 새로운 통찰력을 제공합니다. [2] 4장에서는 나노 제조 기술과 얇은 초전도 필름의 특성에 대한 신중한 고려가 \SI{6}{\tesla}의 강한 평행 자기장과 \SI{20}{\milli \tesla}, 이전에 보고된 것보다 10배 더 큽니다. [3] 넓은 기판에 증착된 초전도 박막의 저항 영역은 초전도체의 단계적 전압-전류 특성 프레임에서 분석됩니다. [4] 우리는 펄스 레이저 증착에 의해 ⟨110⟩ SrTiO3 기판에 YBCO의 에피택셜 성장을 사용하여 기판 표면에 비스듬히 배향된 구리 산화물 평면을 가진 얇은 초전도 필름을 준비했습니다. [5]
Temperature Superconducting Films
The experimental results and constructed theoretical models help us to understand the characteristics of flux avalanche in YBCO films and are of significance to evaluate the flux stability for practical applications of high temperature superconducting films. [1] 25Ba2Cu3O7-σ (HoREBCO, RE = Dy, Er, Yb) high temperature superconducting films were fabricated successfully by a reel-to-reel pulsed laser deposition (PLD) system for the first time. [2] This phenomenon could also lead to the local deterioration of high critical temperature superconducting films abruptly penetrated by thermomagnetic instabilities. [3] We studied how quantum phase coherence evolves across superconductor–metal–insulator transitions through magnetoconductance quantum oscillations in nanopatterned high-temperature superconducting films. [4] The obtained results can stimulate the development of Terahertz generators on the basis of high temperature superconducting films. [5]실험 결과와 구성된 이론적 모델은 YBCO 박막에서 자속 사태의 특성을 이해하는 데 도움이 되며 고온 초전도 박막의 실제 적용을 위한 자속 안정성을 평가하는 데 중요합니다. [1] 25Ba2Cu3O7-σ(HoREBCO, RE=Dy, Er, Yb) 고온 초전도 필름이 처음으로 릴-투-릴 펄스 레이저 증착(PLD) 시스템에 의해 성공적으로 제조되었습니다. [2] 이 현상은 또한 열자기 불안정성에 의해 갑자기 관통된 고온 초전도 필름의 국부적 열화로 이어질 수 있습니다. [3] 우리는 나노패턴의 고온 초전도 필름에서 자기전도 양자 진동을 통해 초전도체-금속-절연체 전이에 걸쳐 양자 위상 일관성이 어떻게 진화하는지 연구했습니다. [4] 얻어진 결과는 고온 초전도막을 기반으로 하는 테라헤르츠 발생기의 개발을 촉진할 수 있다. [5]
Disordered Superconducting Films
We describe an experimental setup designed for transport measurement of thin disordered superconducting films as a function of pressure up to several GPa. [1] Here we demonstrate an approach to the study of strongly disordered superconducting films by relying on the stochastic nature of the disorder probed by electrostatic gating in a restricted geometry. [2] Recent scanning tunnelling microscopy experiments in NbN thin disordered superconducting films found an emergent inhomogeneity at the scale of tens of nanometers. [3]우리는 몇 GPa까지의 압력의 함수로 얇은 무질서한 초전도 필름의 전송 측정을 위해 설계된 실험 설정을 설명합니다. [1] 여기에서 우리는 제한된 기하학에서 정전기 게이팅에 의해 조사된 장애의 확률적 특성에 의존하여 강하게 무질서한 초전도 필름의 연구에 대한 접근 방식을 보여줍니다. [2] NbN 박막의 무질서한 초전도 필름에 대한 최근의 주사 터널링 현미경 실험은 수십 나노미터 규모에서 나타나는 불균일성을 발견했습니다. [3]