Salt Particles(소금 입자)란 무엇입니까?
Salt Particles 소금 입자 - To obtain flakes like zirconia particles at relatively low temperature, the synthesis method for producing zirconia particles on the surface of salt particles that serve as a template is examined. [1] The fabrication of magnesium (Mg), calcium (Ca) and zinc (Zn) with porous structures were carried out by powder metallurgy processes using salt particles (NaCl) as a space holders. [2] The ratio of Cl−/Na+ in the sea fog was slightly lower than that in the sea water due to HCl volatilization from scavenged sea-salt particles. [3] Blockage of pipelines due to accretion of salt particles is detrimental in desalination and water-harvesting industries as they compromise productivity, while increasing maintenance costs. [4] 8 mm), to which was added 15% by mass of salt particles of different nominal sizes: 0. [5] Aged mineral dust and reacted sea-salt particles, including mineral dust mixed with sea salts probably during long-range transatlantic transport, were abundant in the supermicron fractions at both sites. [6] In laboratory experiments, spherical 1 mm-wide glass and basalt particles are heated, and the hot particles collide at about 1 m/s with a flat glass target that is at room temperature. [7] Sea-salt particles are major aerosol constituents in the marine boundary layer (MBL) and are chemically modified by acidic substances from anthropogenic, volcanic, and biogenic sources. [8] All the corrosion occurred at the active sites where dust particles, salt particles and mold spores were scattered. [9] The analysis of diffusion of salt particles into coating during summer and winter season is also presented by estimating the salt concentration by taking linear relationship between wind speed and salt deposition rate based on ISO classification of airborne salinity. [10] The results show that the basalt particles are dispersed in the Al matrix and form a strong bonding interface with the Al matrix. [11] Under these conditions, the hybrid film contained ODAH+Cl− salt particles. [12] 1) sea-salt particles, leading to the depletion of chloride. [13] The results show that the cold-compression and sintering led to a quite compact arrangement of EG regions separated by salt particles, which constrained the Ca(NO3)2 crystal arrangement and orientation of nitrate molecular chains within the mesopores of EG. [14]비교적 낮은 온도에서 지르코니아 입자와 같은 플레이크를 얻기 위해 주형이 되는 염 입자 표면에 지르코니아 입자를 제조하는 합성 방법을 검토하고 있다. [1] 다공성 구조의 마그네슘(Mg), 칼슘(Ca) 및 아연(Zn)의 제조는 공간 홀더로 소금 입자(NaCl)를 사용하여 분말 야금 공정에 의해 수행되었습니다. [2] 해안에서 Cl-/Na+의 비율은 소거된 해염 입자로부터 HCl 휘발로 인해 해수에서보다 약간 낮았다. [3] 염분 입자의 부착으로 인한 파이프라인 막힘은 유지 보수 비용을 증가시키면서 생산성을 저하시키므로 담수화 및 물 수확 산업에 해롭습니다. [4] 8mm), 여기에 다른 공칭 크기의 소금 입자 15 질량%가 추가되었습니다: 0. [5] 늙은 미네랄 더스트 및 미네랄 더스트를 포함한 반응 바다 소금 입자 혼합 아마도 장거리 대서양 횡단 운송 중에 바다 소금과 함께, 두 사이트 모두에서 초미크론 분획에 풍부합니다. [6] 실험실 실험에서는 1mm 너비의 구형 유리와 현무암 입자가 가열되고 뜨거운 입자가 실온에 있는 평평한 유리 타겟과 약 1m/s의 속도로 충돌합니다. [7] 해염 입자는 해양 경계층(MBL)의 주요 에어러솔 성분이며 인위적, 화산 및 생물학적 출처의 산성 물질에 의해 화학적으로 변형됩니다. [8] 모든 부식은 먼지 입자, 염분 입자 및 곰팡이 포자가 흩어져 있는 활성 사이트에서 발생했습니다. [9] 또한, ISO 공기중 염도분류를 기반으로 풍속과 염침착률의 선형 관계를 이용하여 염분 농도를 추정하여 여름철과 겨울철 코팅으로의 염분 입자 확산 분석을 제시하였다. [10] 결과는 현무암 입자가 Al 매트릭스에 분산되어 Al 매트릭스와 강한 결합 계면을 형성함을 보여줍니다. [11] 이러한 조건에서 하이브리드 필름은 ODAH+Cl- 염 입자를 포함했습니다. [12] 1) 염화물 고갈로 이어지는 바다 소금 입자. [13] 결과는 냉간 압축 및 소결이 염 입자에 의해 분리된 EG 영역의 매우 조밀한 배열을 유도하여 EG의 중간 기공 내에서 Ca(NO3)2 결정 배열 및 질산염 분자 사슬의 방향을 제한한다는 것을 보여줍니다. [14]
aged sea salt
Intercomparisons between the precipitation and aerosol data revealed several features: (i) precipitation pH was inversely related to factors associated with more acidic aerosol constituents such as secondary sulfate and aged sea salt, in addition to being reduced by uptake of HNO3 in the liquid phase; (ii) two aerosol source factors (dust and aged sea salt) and PMcoarse exhibited a positive association with Ca2+ in precipitation, suggestive of directly emitted aerosol types with larger sizes promoting precipitation; and (iii) sulfate levels in both the aerosol and precipitation samples analyzed were significantly correlated with dust and aged sea salt PMF factors, pointing to the partitioning of secondary sulfate to dust and sea salt particles. [1]강수와 에어러솔 데이터 사이의 상호비교는 다음과 같은 몇 가지 특징을 보여주었다. (i) 강수 pH는 액상에서 HNO3의 흡수에 의해 감소되는 것 외에도 2차 황산염 및 노화된 해염과 같은 더 산성인 에어로졸 성분과 관련된 요인과 반비례 관계가 있다. (ii) 두 가지 에어러솔 소스 요인(먼지와 오래된 해염)과 PMcoarse는 강수에서 Ca2+와 긍정적인 연관성을 나타냈으며, 이는 강수를 촉진하는 더 큰 크기의 직접 방출 에어러솔 유형을 암시합니다. (iii) 분석된 에어로졸 및 강수 샘플 모두의 황산염 수준은 먼지 및 노화된 바다 소금 PMF 요인과 유의하게 상관관계가 있었으며, 이는 2차 황산염이 먼지 및 바다 소금 입자로 분할되었음을 나타냅니다. [1]
Sea Salt Particles 바다 소금 입자
The submicrometer nitrate particles were likely significantly formed via gas-particle partitioning as HNO3(aq) or NH4NO3 while the larger micrometer-sized sea salt-like nitrate particles might be formed via heterogeneous reaction of gaseous HNO3 with deliquesced sea salt particles. [1] Take the chloride depletion in sea salt particles as an example. [2] However, mineral dust and sea salt particles were also found to play an important role in the poor air quality observed in Villavicencio and likely along the Orinoco river basin region. [3] These differences appear to be due to the fact that the emission of aerosol precursors and sea salt particles is suppressed by sea ice. [4] However, the internal mixture assumption of soot/soot-free and dust/sea salt particles in the three-category method resulted in significant differences in the size distribution and hygroscopicity of the particles. [5] We tested potential interferences in the quantification of sea salt particles under real-world conditions by artificially generating "modified" sea salt particles from a mixture of diluted seawater and SS/SN solution. [6] The AE and UV aerosol index values suggest that Kattankulathur is mainly characterized by large-sized absorbing aerosols (30%) such as dust mixture and sea salt particles. [7] The phase transition from spherical sea salt particles to cubic-like sea salt crystals was observed under atmospheric conditions with a polarization lidar. [8] 57, suggesting the presence of sulfate and maybe sea salt particles mixed with organic carbon. [9] For the first episode, we identified relatively fresh and aged sea salt particles originating from the Atlantic Ocean more than 800 km away. [10] The inventories include primary windblown dust emissions from agricultural and vacant lands, primary sea salt particles emissions from the breaking of waves at the Sea Shore-surf zone and the bursting of bubbles from oceanic whitecaps - Open Ocean, and emissions of BVOCs (Biogenic Volatile Organic Compounds), precursor to PM. [11] Intercomparisons between the precipitation and aerosol data revealed several features: (i) precipitation pH was inversely related to factors associated with more acidic aerosol constituents such as secondary sulfate and aged sea salt, in addition to being reduced by uptake of HNO3 in the liquid phase; (ii) two aerosol source factors (dust and aged sea salt) and PMcoarse exhibited a positive association with Ca2+ in precipitation, suggestive of directly emitted aerosol types with larger sizes promoting precipitation; and (iii) sulfate levels in both the aerosol and precipitation samples analyzed were significantly correlated with dust and aged sea salt PMF factors, pointing to the partitioning of secondary sulfate to dust and sea salt particles. [12] The back trajectory analysis and meteorological conditions indicated that the marine origin cluster was correlated with westerly winds and high wind speed; this cluster had high concentrations of Na-containing particles, as expected for sea salt particles. [13] Compared to the organic-coated water droplets, the surface properties of mixed fatty acid and alcohol-coated aqueous sea salt particles are substantially different. [14] The test was conducted after deposition of simulated sea salt particles on the 304L stainless-steel specimen. [15] Newly formed sea salt particles have a similar composition to seawater; including elements such as Na, Cl, Mg, S, Ca, Br and K. [16] Sea salt particles are beneficial for MSA uptake, as MSA-Na and MSA-Mg particles are abundant in the Na and Mg particles, accounting for 0. [17] The back trajectory analysis and meteorological conditions indicated that the marine origin cluster was correlated with westerly winds and high wind speed; this cluster had high concentrations of Na-containing particles, as expected for sea salt particles. [18] The modeled residence times suggest that the lifetime of sea salt particles with a dry diameter of less than 3 µ m is largely controlled by wet removal, followed by turbulent process. [19]마이크로미터 이하의 질산염 입자는 HNO3(aq) 또는 NH4NO3와 같은 가스 입자 분할을 통해 크게 형성되었을 가능성이 있는 반면 더 큰 마이크로미터 크기의 바다 소금과 같은 질산염 입자는 기체 HNO3와 조해된 바다 소금 입자의 불균일 반응을 통해 형성될 수 있습니다. [1] 바다 소금 입자의 염화물 고갈을 예로 들어 보겠습니다. [2] nan [3] nan [4] nan [5] nan [6] nan [7] nan [8] 57, 황산염 및 아마도 유기 탄소와 혼합된 바다 소금 입자의 존재를 암시합니다. [9] 첫 번째 에피소드에서 우리는 상대적으로 대서양에서 유래한 신선하고 숙성된 바다 소금 입자 more 800 km 이상 떨어져 있습니다. [10] nan [11] 강수와 에어러솔 데이터 사이의 상호비교는 다음과 같은 몇 가지 특징을 보여주었다. (i) 강수 pH는 액상에서 HNO3의 흡수에 의해 감소되는 것 외에도 2차 황산염 및 노화된 해염과 같은 더 산성인 에어로졸 성분과 관련된 요인과 반비례 관계가 있다. (ii) 두 가지 에어러솔 소스 요인(먼지와 오래된 해염)과 PMcoarse는 강수에서 Ca2+와 긍정적인 연관성을 나타냈으며, 이는 강수를 촉진하는 더 큰 크기의 직접 방출 에어러솔 유형을 암시합니다. (iii) 분석된 에어로졸 및 강수 샘플 모두의 황산염 수준은 먼지 및 노화된 바다 소금 PMF 요인과 유의하게 상관관계가 있었으며, 이는 2차 황산염이 먼지 및 바다 소금 입자로 분할되었음을 나타냅니다. [12] nan [13] nan [14] nan [15] nan [16] nan [17] nan [18] nan [19]
Inorganic Salt Particles 무기 소금 입자
Herein, a physisorption analyzer was adopted to determine the hygroscopicity of inorganic salt particles in atmospheric aerosols (e. [1] This also shows that atmospheric ultrafine particles, especially inorganic salt particles, will rapidly grow into larger particles under supersaturated conditions such as increased environmental humidity, thus having some impact on environmental pollution and climate change. [2] In a randomized cross-over study, healthy humans were exposed to filtered air, inorganic salt particles, exhausts from combustion of HVO in engines with aftertreatment [i. [3]여기에서는 대기 에어로졸(e. [1] 이것은 또한 대기 중 초미세 입자, 특히 무기 염 입자가 환경 습도 증가와 같은 과포화 조건에서 더 큰 입자로 빠르게 성장하여 환경 오염 및 기후 변화에 약간의 영향을 미친다는 것을 보여줍니다. [2] nan [3]
Fine Salt Particles
The fine salt particles were utilized to form a multiscale structure on a triboelectric polymer film by mechanical pressure via an eco-friendly, low-cost, and simple process, thereby reinforcing the contact triboelectrification and electrostatic induction. [1] These techniques are based mainly on adding nucleating agents (such as carbon nanotubes, fine salt particles, and nanoaditives), thickeners (such as carboxy methyl cellulose), and macroporous structures. [2]미세염 입자를 이용하여 기계적 압력에 의해 마찰전기 고분자 필름에 다중 스케일 구조를 형성하여 친환경적이고 저렴하며 간단한 공정을 통해 접촉 마찰 대전 및 정전기 유도를 강화하였다. [1] nan [2]
Dry Salt Particles
The results indicate that the strengths of wet and dry salt particles are identical. [1] Also, it seems that the particles which are originating from the lake, are mostly dry salt particles, where their corresponding PDR is 0. [2]결과는 습식 및 건식 염 입자의 강도가 동일함을 나타냅니다. [1] 또한 호수에서 발생하는 입자는 대부분 건조염 입자로 해당 PDR이 0인 것으로 보입니다. [2]
salt particles originating
For the first episode, we identified relatively fresh and aged sea salt particles originating from the Atlantic Ocean more than 800 km away. [1] To the same group, the ions of chlorine and sodium are attracted, which probably were transported together with salt particles originating from Central Asian deserts. [2]첫 번째 에피소드에서 우리는 상대적으로 대서양에서 유래한 신선하고 숙성된 바다 소금 입자 more 800 km 이상 떨어져 있습니다. [1] 같은 그룹에 염소와 나트륨 이온이 끌리는데, 이는 아마도 중앙아시아 사막에서 유래한 소금 입자와 함께 운반되었을 것입니다. [2]