Salt Ions(소금 이온)란 무엇입니까?
Salt Ions 소금 이온 - As a common cofactor, the presence of salt ions is essential for some biological processes involving proteins, and in aqueous suspensions of proteins can also give rise to complex phase diagrams including homogeneous solutions, large aggregates, and dissolution regimes. [1] To understand the reversed order in the cation series, we performed molecular dynamics simulations of aqueous solutions of salt ions and calculated the Setschenow coefficient of methane with the ionic radius of either a cation or an anion varied in a wide range. [2] Moreover, in-situ nitrogen-doped 3D HPC improved the electrosorption to salt ions through increased conductivity of 3D HPC. [3] The presence and addition of salt ions in water may have a significant effect on the slime coatings (Chen and Peng, 2018) and pulp rheology (Huang et al. [4] Chemical stratigraphies of NO3−, MSA (methanesulfonic acid), non-sea salt SO42−, sea-salt ions and the oxygen isotopic composition (δ18O) were used in the annual layer counting upon the identification of a seasonal profile in their records. [5] In this article we investigate model membranes surficially coated from one side with two types of anion exchange modifiers and conclude that for both types of created samples a high limiting current of salt ions is observed but the intensity of a side process, a shift in the pH of the treated solution, increases after the modification. [6] Capacitive deionization (CDI) is an emerging membraneless technique for water treatment and desalination, based on electrosorption of salt ions into charging microporous electrodes. [7] EGCG stability was significantly increased in the presence of salt ions (0-100 mM NaCl) and under different temperatures (25 °C, 37 °C) when delivered as niosomes and bilosomes. [8] The results demonstrated that downward movement of soil water was stimulated in AMSF method, accordingly, washing more salt ions out of top rooting zone. [9] It is also possible that local relaxation is not controlled by breakage of ion pairs but by cooperative, “glassy,” relaxation of monomers, salt ions, and water molecules. [10] The effects of Pd content, salt ions and catalytic reaction temperature on the photocatalytic activities of the Pd QDs loading Ti3+,N co-doped TiO2 NTA catalysts were explored systematically. [11] Developing membranes with low rejection of salt ions and high rejection of contaminants is desirable for drinking water treatment and wastewater reuse. [12] Atmospheric aerosols contain a variety of compounds, among them free amino acids and salt ions. [13] Electrokinetic desalination is very useful method for the removal of salt ions from porous building materials. [14] In liquid–liquid extractions, the aqueous phase from which heavy metal ions are extracted often contains a mixture of salt ions (brine). [15] The obtained microspheres show large reversible volume changes through well-controlled dehydration or hydration of PEO in response to salt ions in an aqueous environment. [16] The effect of different sea-salt ions on DIP adsorption/desorption was also assessed by comparing different experimental solutions (NaCl solution, artificial seawater and real seawater). [17] This work highlights the importance of salt ions, which are sometimes overlooked, since they can contribute a non-uniform and anisotropic long-range potential to the electrostatic environment of an active site. [18] In the presence of salt ions, effect of hydration becomes more dominant which resists the deformation of the nanodroplet. [19] We describe its elemental composition and possible seasonal variation in relation to edaphic and climatic variables, identify biominerals and analyze the distribution of salt ions and biominerals in tissue. [20] In addition, the membrane had a very low retention of salt ions, Nacl 1. [21] Compared with uncrusted soil, biocrusts increased water content, nutrient accumulation and concentration of most salt ions, but they reduced soil pH value. [22] Highly efficient capacitive deionization (CDI) relies on unimpeded transport of salt ions to the electrode surface. [23]공통 보조인자로서 염 이온의 존재는 단백질과 관련된 일부 생물학적 과정에 필수적이며 단백질의 수성 현탁액에서 균질한 용액, 큰 응집체 및 용해 체제를 포함하는 복잡한 상 다이어그램을 생성할 수도 있습니다. [1] 양이온 계열의 역순을 이해하기 위해 우리는 염 이온 수용액의 분자 역학 시뮬레이션을 수행하고 양이온 또는 음이온의 이온 반경이 광범위하게 변하는 메탄의 Setschenow 계수를 계산했습니다. [2] 또한, 현장 질소 도핑된 3D HPC는 3D HPC의 전도성 증가를 통해 염 이온에 대한 전기 흡착을 개선했습니다. [3] 물에 염 이온의 존재와 첨가는 점액 코팅(Chen and Peng, 2018)과 펄프 유동학(Huang et al. [4] NO3-, MSA(methanesulfonic acid), 비-해염 SO42-, 해염 이온 및 산소 동위원소 조성(δ18O)의 화학적 층서는 기록에서 계절적 특성이 확인된 것을 고려하여 연간 층에 사용되었습니다. [5] 이 기사에서 우리는 한 면에서 두 가지 유형의 음이온 교환 조절제로 표면이 코팅된 모델 멤브레인을 조사하고 생성된 두 가지 유형의 샘플에 대해 염 이온의 높은 제한 전류가 관찰되지만 부수적 프로세스의 강도, 즉 pH 이동의 강도가 관찰된다는 결론을 내립니다. 처리된 용액의 수정 후 증가합니다. [6] 용량성 탈이온화(CDI)는 충전 미세다공성 전극으로 염 이온의 전기흡착을 기반으로 하는 수처리 및 담수화를 위한 막이 없는 새로운 기술입니다. [7] EGCG 안정성은 니오솜 및 빌로솜으로 전달될 때 염 이온(0-100mM NaCl)의 존재 및 다양한 온도(25°C, 37°C)에서 크게 증가했습니다. [8] 결과는 AMSF 방법에서 토양수의 하향 이동이 자극되어 상부 뿌리 영역에서 더 많은 염 이온을 세척한다는 것을 보여주었습니다. [9] 국소 이완은 이온 쌍의 파손이 아니라 협력적, "유리질", 단량체, 염 이온 및 물 분자의 이완에 의해 제어될 수도 있습니다. [10] Ti3+,N 공동 도핑된 TiO2 NTA 촉매를 탑재한 Pd QD의 광촉매 활성에 대한 Pd 함량, 염 이온 및 촉매 반응 온도의 영향을 체계적으로 조사했습니다. [11] 식수 처리 및 폐수 재이용을 위해서는 염 이온 제거율이 낮고 오염 물질 제거율이 높은 멤브레인을 개발하는 것이 바람직합니다. [12] 대기 중 에어로졸에는 유리 아미노산과 염 이온을 비롯한 다양한 화합물이 포함되어 있습니다. [13] 동전기식 담수화는 다공성 건축 자재에서 염 이온을 제거하는 데 매우 유용한 방법입니다. [14] 액체-액체 추출에서 중금속 이온이 추출되는 수성상은 종종 염 이온(염수)의 혼합물을 포함합니다. [15] 얻어진 미소구체는 수성 환경에서 염 이온에 대한 반응으로 PEO의 잘 제어된 탈수 또는 수화를 통해 큰 가역적 부피 변화를 보여줍니다. [16] DIP 흡착/탈착에 대한 다양한 해염 이온의 영향은 또한 다른 실험 용액(NaCl 용액, 인공 해수 및 실제 해수)을 비교하여 평가되었습니다. [17] 이 연구는 염 이온이 활성 부위의 정전기 환경에 불균일하고 이방성인 장거리 전위를 제공할 수 있기 때문에 때때로 간과되는 염 이온의 중요성을 강조합니다. [18] 염 이온이 존재하면 수화 효과가 더 우세하여 나노 액적의 변형에 저항합니다. [19] 우리는 edaphic 및 기후 변수와 관련하여 원소 구성과 가능한 계절적 변화를 설명하고, 생체 광물을 식별하고, 조직 내 염 이온 및 생체 광물의 분포를 분석합니다. [20] 또한, 멤브레인은 염 이온인 Nacl 1의 유지율이 매우 낮습니다. [21] 껍질을 벗기지 않은 토양과 비교하여 바이오크러스트는 수분 함량, 영양소 축적 및 대부분의 염 이온 농도를 증가시켰지만 토양 pH 값은 감소시켰습니다. [22] 고효율 용량성 탈이온화(CDI)는 전극 표면으로 염 이온의 방해받지 않는 수송에 의존합니다. [23]
Inorganic Salt Ions 무기염 이온
Notably, when inorganic salt ions coexist with organic matters in water, a complex structure of gel network can be formed, which causes serious pollution to RO membrane and sharp decrease of the specific flux (J/J0). [1] The changes of water content and inorganic salt ions that occur in pine trees during winter gradually alter the osmotic pressure in the liquid environment to dehydrate B. [2] The interaction between APAM and inorganic salt ions mainly accelerates membrane fouling through charge shielding and complexation. [3] The specificity of the fabricated sensor towards BPA was assessed by analyzing the interference effect of some inorganic salt ions and phenol derivatives. [4] Also, the paper will play a guiding role in the treatment of inorganic salt ions and organic matters in wastewater. [5] Compared with the pure ZIF-8 counterpart, the DNA-containing ZIF-8 membrane exhibited higher water flux, accompanied with higher rejections for organic dyes and inorganic salt ions. [6]특히, 무기염 이온이 수중의 유기물과 공존할 경우 복잡한 겔 네트워크 구조가 형성되어 RO 막의 심각한 오염과 비플럭스(J/J0)의 급격한 감소를 초래한다. [1] 겨울철 소나무에서 발생하는 수분함량 및 무기염 이온의 변화는 액체 환경의 삼투압을 점차적으로 변화시켜 B를 탈수시킨다. [2] APAM과 무기 염 이온 간의 상호 작용은 주로 전하 차폐 및 착화를 통해 막 오염을 가속화합니다. [3] BPA에 대한 제작된 센서의 특이성은 일부 무기염 이온과 페놀 유도체의 간섭 효과를 분석하여 평가되었습니다. [4] nan [5] nan [6]
Reject Salt Ions 소금 이온 거부
This is enabled by the subtly balanced solubility properties of directional solvents, which do not dissolve in water but can dissolve water and reject salt ions. [1] In CNT arrays, each CNT transports water molecules and rejects salt ions independently. [2] The self-passivated phosphorene nanopores showed 100% ability to reject salt ions (Na+ and Cl−) for all pore areas even at higher pressures. [3] With the development of nanopore technology, various kinds of nanopore sea water desalination methods have been reported, by controlling the pore size and functionalizing the nanopore, the nanopore can effectively reject salt ions. [4]이것은 물에 용해되지 않지만 물을 용해하고 염 이온을 거부할 수 있는 방향성 용매의 미묘하게 균형잡힌 용해도 특성에 의해 가능합니다. [1] CNT 어레이에서 각 CNT는 물 분자를 수송하고 독립적으로 염 이온을 거부합니다. [2] nan [3] nan [4]
Hydrated Salt Ions 수화된 소금 이온
This promising performance is partially due to the elliptical pores of strained nanomeshes, which allow the passage of rotated water molecules while rejecting hydrated salt ions. [1] This implies that although a decrease in electrostatic repulsion leads to the formation of a compact fouling layer, an increase in hydration repulsion of hydrated salt ions plays a major role in membrane fouling under high ionic strength conditions. [2] Meanwhile, the membrane is suitable for removing dyes from salt solution products owing to their nonselective permeation for hydrated salt ions (<10. [3]이 유망한 성능은 부분적으로 변형된 나노메쉬의 타원형 기공에 기인하며, 이는 수화된 염 이온을 거부하면서 회전된 물 분자의 통과를 허용합니다. [1] 이는 정전기적 반발력의 감소가 조밀한 파울링 층의 형성으로 이어지지만, 수화된 염 이온의 수화 반발성 증가가 높은 이온 강도 조건에서 막 파울링에 중요한 역할을 한다는 것을 의미한다. [2] nan [3]
Monovalent Salt Ions 1가 염 이온
Finally, the osmotic pressure calculated in a compact DNA-AuNP lattice with various amounts of monovalent salt ions shows that an increasing amount of salt prevents aggregate formation. [1] The rejection rates of the three kinds of nanofiltration membranes were all over 30% for monovalent salt ions, over 60% for divalent salt ions, over 92% for methyl orange, and over 98% for methyl blue. [2]마지막으로, 다양한 양의 1가 염 이온이 있는 조밀한 DNA-AuNP 격자에서 계산된 삼투압은 염의 양이 증가하면 응집체 형성을 방지한다는 것을 보여줍니다. [1] 세 종류의 나노여과막의 거부율은 모두 1가 염 이온 30% 이상, 2가 염 이온 60% 이상, 메틸 오렌지 92% 이상, 메틸 블루 98% 이상이었다. [2]
Multivalent Salt Ions 다가 염 이온
1 to 1 nm (equivalent to molecular weight cut-off of 200–1000 Da), the NF membrane has a high removal rate for multivalent salt ions and organic solutes which have a molecular weight larger than 200 Da. [1] polyelectrolytes, ionic amphiphiles, multivalent salt ions) represents a well-established formulation approach to produce sustained release of highly soluble drugs while maintaining a high drug payload. [2]1~1nm(200-1000Da의 분자량 컷오프와 동일)에서 NF 멤브레인은 분자량이 200Da보다 큰 다가 염 이온 및 유기 용질에 대한 제거율이 높습니다. [1] 고분자 전해질, 이온성 양친매성 물질, 다가 염 이온)은 높은 약물 탑재량을 유지하면서 고용해성 약물의 지속 방출을 생성하기 위한 잘 확립된 제형 접근 방식을 나타냅니다. [2]
Variou Salt Ions 다양한 소금 이온
In biomedical applications, BP-nanodots might encounter various salt ions in body fluids and have a propensity to aggregate, further resulting in an enhanced toxicity risk. [1] The fabricated AC powder was used as electrodes in CDI system to investigate the desalination performance under the influence of various salt ions concentrations as well as applied potentials. [2]생물의학 응용 분야에서 BP-나노닷은 체액에서 다양한 염 이온을 만날 수 있고 응집하는 경향이 있어 독성 위험이 더욱 높아집니다. [1] 제작된 AC 분말을 CDI 시스템의 전극으로 사용하여 다양한 염 이온 농도 및 인가 전위의 영향 하에서의 담수화 성능을 조사했습니다. [2]
Soil Salt Ions 토양 염 이온
Spatial distribution of soil salt ions in different soil layers were drawn to research spatial distribution characteristics of soil ions. [1] This study aimed to investigate the effects of arbuscular mycorrhizal fungi (AMFs) and earthworms in enhancing soil P bioavailability by regulating soil salt ions and altering the soil bacterial community under salt stress. [2]토양이온의 공간적 분포 특성을 연구하기 위해 토양층별 토양염 이온의 공간적 분포를 도출하였다. [1] 이 연구는 토양 염분 이온을 조절하고 염분 스트레스 하에서 토양 박테리아 군집을 변화시켜 토양 P 생체 이용률을 향상시키는 데 있어 수지상 균근 균류(AMFs)와 지렁이의 효과를 조사하는 것을 목표로 하고 있습니다. [2]
Different Salt Ions 다른 소금 이온
MG could satisfactorily remove EDTA-Cu(II) from complex environments in one step and was only minimally affected by various experimental conditions (the presence of different salt ions, different ratios of EDTA organic groups, and different dissolved oxygen concentrations). [1] This study quantifies the effect of different salt ions and pH on the performance of two different WAPs, including commercially available WAP (crosslinked potassium polyacrylate) and laboratory-grade WAP (crosslinked fly ash-polyacrylate superabsorbent composite). [2]MG는 한 단계로 복잡한 환경에서 EDTA-Cu(II)를 만족스럽게 제거할 수 있으며 다양한 실험 조건(다른 염 이온의 존재, EDTA 유기기의 다른 비율 및 다른 용존 산소 농도)의 영향을 최소화했습니다. [1] 이 연구는 상업적으로 이용 가능한 WAP(가교결합된 폴리아크릴산칼륨) 및 실험실 등급 WAP(가교결합된 플라이애시-폴리아크릴레이트 초흡수성 복합재)를 포함하여 두 가지 다른 WAP의 성능에 대한 다양한 염 이온 및 pH의 영향을 정량화합니다. [2]
Dissolved Salt Ions 용해된 염 이온
In the adsorption tests, it was found that the increase in pH from 5 to 9 caused a small reduction in the adsorption capacity, however the effect of the ionic strength showed that the dissolved salt ions acted as co-adsorbents, favoring adsorption. [1] Therefore, the desalination process via pervaporation has chosen to separate the dissolved salt ions in water. [2]흡착 시험에서 pH가 5에서 9로 증가하면 흡착 용량이 약간 감소하는 것으로 나타났지만 이온 강도의 영향은 용해된 염 이온이 공동 흡착제로 작용하여 흡착을 선호하는 것으로 나타났습니다. [1] 따라서 투과증발을 통한 담수화 공정은 물에 용해된 염 이온을 분리하도록 선택되었습니다. [2]
salt ions mainly 주로 소금 이온
The interaction between APAM and inorganic salt ions mainly accelerates membrane fouling through charge shielding and complexation. [1] Excessive salt ions mainly cause damage by inducing osmotic stress, ion toxicity, and oxidation stress. [2]APAM과 무기 염 이온 간의 상호 작용은 주로 전하 차폐 및 착화를 통해 막 오염을 가속화합니다. [1] 과도한 염 이온은 주로 삼투압 스트레스, 이온 독성 및 산화 스트레스를 유발하여 손상을 유발합니다. [2]
salt ions moved 소금 이온 이동
Salt ions moved spontaneously to the cathode and anode under the influence of current generation so that the desalination function was realized under the selective isolation function of exchange membranes. [1] Salt ions moved spontaneously to the cathode and anode under the premise of current generation, so that the desalination function was realized under the selective isolation function of exchange membranes. [2]염 이온은 전류 생성의 영향으로 음극과 양극으로 자발적으로 이동하여 교환막의 선택적 분리 기능 하에서 담수화 기능이 구현되었습니다. [1] 전류 생성을 전제로 염이온이 양극과 음극으로 자발적으로 이동하여 교환막의 선택적 분리 기능 하에서 담수화 기능이 구현되었다. [2]
salt ions play 소금 이온 플레이
This implies that although a decrease in electrostatic repulsion leads to the formation of a compact fouling layer, an increase in hydration repulsion of hydrated salt ions plays a major role in membrane fouling under high ionic strength conditions. [1] Salt ions play critical roles in the assembly of polyelectrolytes such as nucleic acids and colloids since ions can regulate the effective interactions between them. [2]이는 정전기적 반발력의 감소가 조밀한 파울링 층의 형성으로 이어지지만, 수화된 염 이온의 수화 반발성 증가가 높은 이온 강도 조건에서 막 파울링에 중요한 역할을 한다는 것을 의미한다. [1] 염 이온은 이온이 이들 사이의 효과적인 상호작용을 조절할 수 있기 때문에 핵산 및 콜로이드와 같은 고분자 전해질의 조립에서 중요한 역할을 합니다. [2]
salt ions present 소금 이온 존재
The carboxylic acid adsorption onto the calcite surface was controlled by interactions of negative ions formed during dissociation of carboxylic acids and positive salt ions present in brine solvents. [1] It is shown that the effect of de-icing salt ions present in the pore solution depends on the degree of saturation, and that the critical degree of saturation depends on the minimum temperature. [2]방해석 표면에 대한 카르복실산 흡착은 카르복실산의 해리 과정에서 형성된 음이온과 염수 용매에 존재하는 양이온 염 이온의 상호작용에 의해 제어되었다. [1] 기공 용액에 존재하는 제빙염 이온의 영향은 포화도에 따라 달라지며 임계 포화도는 최저 온도에 따라 달라지는 것으로 나타났습니다. [2]
salt ions within 내 염 이온
The internal concentration polarization due to the accumulation of salt ions within the porous support increases the concentration of ions on the membrane surface and thus decreases the driving force significantly. [1] Using Batchelor’s viscous correction factor to determine an effective viscosity experienced by the salt ions within the polymer matrix leads to much closer agreement with experiment. [2]다공성 지지체 내 염 이온의 축적으로 인한 내부 농도 분극은 멤브레인 표면의 이온 농도를 증가시켜 구동력을 크게 감소시킵니다. [1] Batchelor의 점성 보정 계수를 사용하여 폴리머 매트릭스 내의 염 이온이 경험하는 유효 점도를 결정하면 실험과 훨씬 더 밀접하게 일치합니다. [2]