Salt Addition(소금 첨가)란 무엇입니까?
Salt Addition 소금 첨가 - Therefore, we study the effect of salt addition and incubation time, as the two important factor in commonly cabbage-based fermentation, combined with someoxalate-degrading-bacteria, which was L. [1] The influencing parameters, including the type of DES, amount of DES, extraction time, solution pH and salt addition, were investigated and optimized. [2] The effect of the type and volume of the extraction solvent in the pretreatment step, the volume of the disperser solvent (acetone extract), the type and volume of the extraction solvent, pH, and salt addition in the DLLME procedure was studied. [3] The aim of this study was to assess microbial mediated decomposition of two leaf species contrasting in quality (alder and oak) and associated descriptors, during salt-pulsed contamination (salinization period) and after cessation of salt additions (recovery period). [4] We conducted a 10 mo field experiment to investigate how a symbiosis between the salt marsh plant Spartina alterniflora and DSE fungi responded to increased resources (nutrient addition) and physical stress (salt addition). [5] In evaluation of the effect of salt addition, sodium carbonate, calcium chloride, iron chloride, and cobalt chloride increased the enzymatic activity of α-amylase, while potassium and sodium from their chlorides served as enzyme inhibitors. [6] Rebon Shrimp Paste (RSP) in Indonesia uses different percentages of salt addition, ranging from 2 to 20% or not at all. [7] On this basis, the proteins exhibited superior ability to stabilize the emulsions, and remarkably, the emulsions stabilized by 2% proteins and 3:7 oil/water ratio efficiently resisted the freeze-thaw treatment and the change of pH (3–9), salt addition (NaCl, 50–400 mM), and storage temperatures (4–60°C). [8] The optimum parameters which improve the efficiency are paper length 1 cm × 2 cm, adsorption time 15 min, eluent methanol, eluent volume 5 mL, sample pH 7, desorption time 2 min, 2% salt addition and 300 rpm stirring rate respectively. [9] The CS-coated Cur-RL-Lips remained stable from pH 2 to 5 at room temperature and can effectively slow the degradation of curcumin at 80 °C; however, they were highly unstable to salt addition. [10] Experiment 1 showed that salt addition (particularly 150 mM NaCl) reduced plant height, stem diameter, shoot and root dry weights, photosynthetic traits, and leaf K+/Na+ ratio while increasing the leaf Na+ concentration of castor bean plants. [11] The aluminum melt with salt addition was ultrasonically stirred to achieve better dispersion of the particles and refine the cast microstructure. [12] Water uptake into the medium and slow pools was slowed by salt addition, with the medium pool thought to be cellular, while the slow pool is presumably related to endosperm hydration. [13] The significant proportion of salt intake is derived from salt additions during cooking and/or discretionary use at table. [14] The result shows that the best condition to optimize the antioxidant capacity is by performing the germination process at 25°C for 15 hours with soybean to water ratio being 1:3 without any salt addition. [15] The stabilizing effect of lysozymes to salt addition over a gold colloid are exploited in order to detect lysozymes in human urine samples. [16] The main parameters include charging time, current density, and salt addition. [17] Salt addition at acidic pH could protect the protein from acid denaturation leading to a low heat denaturation at 62 °C–68 °C compared to heat denaturation at neutral pH. [18] The formation process can be approached by various ways, including gas flush, salt addition and pH regulation. [19] A high increase of the proline content was detected after salt addition in all somaclones ranged from 7. [20] The results of adsorption kinetics at 50 and 100 mg L–1 under optimum conditions (pH = 2, ionic strength = no salt addition, the solution volume = 25 mL, stirring time = 10 min and adsorbent weight = 0. [21] Percentage recovery is also influenced by formation of the appropriate bonds, sample flow rates, extraction time, salt addition, and sorbent mass. [22] We studied the effect of salt addition on a diblock copolymer system with a negative Flory–Huggins interaction parameter, χ, indicative of attractive interactions between the two blocks. [23] The influence of several effective parameters on the extraction efficiency, including sorbent amount, salt addition, pH, adsorption and desorption time, type and volume of elution solvent, type and volume of extraction solvent, and time and speed of centrifugation, was assessed. [24] The influence of salt addition on the rheological properties and sintering behaviour of ceramic samples was then investigated. [25] We investigated the effects of solvency and salt addition on the morphology, photoresponsivity, and fluorescence of the block copolymer poly(ethylene glycol)methyl ether-block-poly(6-[4-(4′-methoxyphenylazo)phenoxy]hexyl methacrylate) (PEG-b-PAzo). [26] Moreover, the important variables affecting the performance of applied microextraction technique including needle diameter, volume of the spiked sample, volume of the ionic liquid, salt addition, rotation speed of centrifugation, centrifuge time, and ultrasonic time were optimized by experimental design. [27] The mechanism of the influence of NaCl on the nucleation and phase transition of the PVDF thin films was revealed based on the synergistic effect of the electric field and salt addition. [28] In this study, we explore the effect of the electrospinning parameters — namely polymer concentration, voltage, tip-to-collector distance and flow rate — and salt addition on the diameter, morphology, and spinnability of electrospun PI nanofibers. [29] Soybean oil-storing organelles called oil bodies/oleosomes (OBs) are a potential eco-friendly plant-based emulsifier, whereas combinational effects of acid and salt addition on emulsifying properties of OBs were still unclear. [30] In the present study, under single-stage cultivation (mixotrophic mode), the effect of glucose and salt addition on biomass growth, lipid productivity, and FAME profiles in Graesiella emersonii NC-M1 were performed and analyzed. [31] For synthetic polyacrylamides and polypeptides/DNA, with unequal mixing stoichiometry, we report a general “looping-in” phenomenon found around physiological salt concentrations, where the polymer concentrations in the coacervate initially increase with salt addition before subsequently decreasing. [32] Several important parameters influencing extraction efficiency were investigated and optimized, including the type and volume of HDES, ultrasound time, solution pH and the amount of salt addition. [33]따라서 우리는 일반적으로 양배추 기반 발효의 두 가지 중요한 요소인 소금 첨가 및 배양 시간의 영향을 L. [1] DES의 유형, DES의 양, 추출 시간, 용액 pH 및 염 첨가를 포함하여 영향을 미치는 매개변수를 조사하고 최적화했습니다. [2] 전처리 단계에서 추출 용매의 종류와 부피, 분산 용매(아세톤 추출물)의 부피, 추출 용매의 종류와 부피, DLLME 과정에서 pH, 염 첨가의 영향을 연구하였다. [3] 이 연구의 목적은 염분 오염 기간(염류화 기간)과 염분 첨가 중단 후(회수 기간) 품질(알더 및 오크) 및 관련 설명자가 대조되는 두 잎 종의 미생물 매개 분해를 평가하는 것이었습니다. [4] 염습지 식물인 Spartina alterniflora와 DSE 균류의 공생이 자원 증가(영양소 첨가)와 물리적 스트레스(염분 첨가)에 어떻게 반응하는지 조사하기 위해 10개월 동안 현장 실험을 수행했습니다. [5] 염 첨가의 효과를 평가한 결과, 탄산나트륨, 염화칼슘, 염화철, 염화코발트는 α-아밀라아제의 효소 활성을 증가시켰고, 염화칼륨과 염화나트륨은 효소 억제제 역할을 하였다. [6] 인도네시아의 RSP(Rebon Shrimp Paste)는 2~20% 또는 전혀 사용하지 않는 다양한 비율의 소금을 사용합니다. [7] 이를 바탕으로 단백질은 에멀젼을 안정화시키는 능력이 탁월했으며, 놀랍게도 2% 단백질과 3:7 오일/물 비율로 안정화된 에멀젼은 동결-해동 처리 및 pH(3-9)의 변화에 효율적으로 저항하며, 염 첨가(NaCl, 50–400mM) 및 보관 온도(4–60°C). [8] 효율성을 향상시키는 최적의 매개변수는 용지 길이 1cm × 2cm, 흡착 시간입니다. 15분, 용리액 메탄올, 용리액 부피 5mL, 샘플 pH 7, 탈착 시간 2분, 2% 염 첨가 및 각각 300rpm의 교반 속도. [9] CS 코팅된 Cur-RL-Lips는 실온에서 pH 2에서 5까지 안정적으로 유지되었으며 80°C에서 커큐민의 분해를 효과적으로 늦출 수 있습니다. 그러나 이들은 염 첨가에 대해 매우 불안정하였다. [10] 실험 1은 소금 첨가(특히 150mM NaCl)가 식물 높이, 줄기 직경, 새싹 및 뿌리 건조 중량, 광합성 특성 및 잎 K+/Na+ 비율을 감소시키면서 피마자 식물의 잎 Na+ 농도를 증가시키는 것으로 나타났습니다. [11] 염이 첨가된 알루미늄 용융물을 초음파로 교반하여 입자의 더 나은 분산을 달성하고 주조 미세 구조를 미세화했습니다. [12] 배지 및 느린 풀로의 물 흡수는 염 첨가에 의해 느려졌으며, 중간 풀은 세포로 생각되는 반면 느린 풀은 아마도 배유 수화와 관련이 있을 것입니다. [13] 소금 섭취의 상당 부분은 요리 중 소금 첨가 및/또는 식탁에서의 임의적 사용에서 비롯됩니다. [14] 그 결과, 항산화 능력을 최적화하기 위한 최상의 조건은 소금을 첨가하지 않고 대두와 물의 비율을 1:3으로 하여 25°C에서 15시간 동안 발아 과정을 수행하는 것입니다. [15] 금 콜로이드에 대한 염 첨가에 대한 리소자임의 안정화 효과는 인간 소변 샘플에서 리소자임을 검출하기 위해 이용됩니다. [16] 주요 매개변수에는 충전 시간, 전류 밀도 및 염 첨가가 포함됩니다. [17] 산성 pH에서 염을 첨가하면 중성 pH에서의 열 변성에 비해 62°C–68°C에서 낮은 열 변성을 유발하는 산성 변성으로부터 단백질을 보호할 수 있습니다. [18] 형성 과정은 가스 플러시, 염 첨가 및 pH 조절을 포함한 다양한 방법으로 접근할 수 있습니다. [19] 모든 소맥클론에서 염 첨가 후 프롤린 함량의 높은 증가가 7 범위에서 감지되었습니다. [20] 최적 조건(pH = 2, 이온 강도 = 염 첨가 없음, 용액 부피 = 25mL, 교반 시간 = 10분 및 흡착제 중량 = 0)에서 50 및 100mg L–1에서의 흡착 동역학 결과. [21] 회수율은 또한 적절한 결합의 형성, 샘플 유속, 추출 시간, 염 첨가 및 흡착제 질량의 영향을 받습니다. [22] 우리는 두 블록 사이의 매력적인 상호 작용을 나타내는 음의 Flory-Huggins 상호 작용 매개 변수 χ를 사용하여 이중 블록 공중 합체 시스템에 대한 염 첨가 효과를 연구했습니다. [23] 흡착제 양, 염 첨가, pH, 흡착 및 탈착 시간, 용리 용매의 유형 및 부피, 추출 용매의 유형 및 부피, 원심분리 시간 및 속도를 포함하여 추출 효율에 대한 여러 효과적인 매개변수의 영향을 평가했습니다. [24] 그런 다음 세라믹 샘플의 유변학적 특성 및 소결 거동에 대한 염 첨가의 영향을 조사했습니다. [25] 우리는 블록 공중합체 폴리(에틸렌 글리콜)메틸 에테르-블록-폴리(6-[4-(4'-메톡시페닐아조)페녹시]헥실 메타크릴레이트)의 형태, 광 반응성 및 형광에 대한 용해력 및 염 첨가의 영향을 조사했습니다. PEG-b-PAzo). [26] 또한, 바늘 직경, 스파이크 샘플의 부피, 이온성 액체의 부피, 염 첨가, 원심분리 회전 속도, 원심분리 시간 및 초음파 시간을 포함하여 적용된 미세추출 기법의 성능에 영향을 미치는 중요한 변수는 실험 설계에 의해 최적화되었습니다. [27] PVDF 박막의 핵형성 및 상전이에 대한 NaCl의 영향 메커니즘은 전기장과 염 첨가의 시너지 효과에 기초하여 밝혀졌다. [28] 이 연구에서 우리는 전기방사 매개변수(폴리머 농도, 전압, 팁-컬렉터 거리 및 유속)와 전기방사된 PI 나노섬유의 직경, 형태 및 방사성에 대한 염 첨가의 영향을 조사합니다. [29] 오일 바디/올레오좀(OBs)이라고 하는 대두 오일 저장 소기관은 잠재적인 친환경 식물 기반 유화제인 반면, 산 및 염 첨가가 OB의 유화 특성에 미치는 조합 효과는 여전히 불분명합니다. [30] 본 연구에서는 단일 단계 배양(혼합 영양 모드)에서 Graesiella emersonii NC-M1의 포도당 및 염 첨가가 바이오매스 성장, 지질 생산성 및 FAME 프로파일에 미치는 영향을 수행하고 분석했습니다. [31] 불균등한 혼합 화학량론을 사용하는 합성 폴리아크릴아미드 및 폴리펩타이드/DNA의 경우 생리학적 염 농도 주변에서 발견되는 일반적인 "루핑-인" 현상을 보고합니다. 여기서 코아세르베이트의 중합체 농도는 염을 첨가함에 따라 초기에 증가하기 전에 이후에 감소합니다. [32] HDES의 유형 및 부피, 초음파 시간, 용액 pH 및 염 첨가량을 포함하여 추출 효율에 영향을 미치는 몇 가지 중요한 매개변수를 조사하고 최적화했습니다. [33]
Without Salt Addition 소금 무첨가
), acidic or neutral conditions (pH 2–7) without salt addition. [1] Results show that carbon black may enhance the decomposition of amounts of Ti3AlC2 at 1,100°C by heat treatment without salt addition, while molten salt plays key roles in the total decomposition of Ti3AlC2 and the formation of TiC nanosheets at 1,000°C. [2] The present study suggests that CPME can be used as a green and efficient extraction solvent for the conversion of xylose into furfural without salt addition. [3] The results of the present study suggest that banded cichlid post-larvae showed higher survival rates in water without salt addition, however, the best growth of this species occurred at the salinity of 2 g/L. [4]), 염을 첨가하지 않은 산성 또는 중성 조건(pH 2-7). [1] 결과는 카본 블랙이 염을 첨가하지 않은 열처리에 의해 1,100°C에서 Ti3AlC2 양의 분해를 향상시킬 수 있는 반면 용융염은 1,000°C에서 Ti3AlC2의 전체 분해 및 TiC 나노시트 형성에 중요한 역할을 한다는 것을 보여줍니다. [2] nan [3] nan [4]
Inorganic Salt Addition
6 g/100ml), phenol concentration (50–500 mg/L), and inorganic salt addition (0. [1] 5% of inorganic salt addition. [2]6g/100ml), 페놀 농도(50–500mg/L), 무기염 첨가(0. [1] nan [2]
salt addition prior
Thus, this study demonstrated the importance of stimulating nitrifying bacteria with nitrogen salt addition prior to shrimp production. [1] Monovalent salt addition prior to crosslinking is shown to modify the extent of bundling, thereby influencing the magnitude of G'' overshoot and strain-stiffening. [2]따라서 이 연구는 새우 생산 전에 질소염을 첨가하여 질산화 박테리아를 자극하는 것이 중요함을 보여주었습니다. [1] nan [2]
salt addition increased 소금 첨가 증가
Moreover, salt addition increased the viscosity of galactomannan solution when the ionic strength was 1 mmol/kg, which related to an increased occurrence of intermolecular interactions. [1] Salt addition increased soil salt from 2. [2]또한, 염 첨가는 이온 강도가 1mmol/kg일 때 갈락토만난 용액의 점도를 증가시켰는데, 이는 분자간 상호작용의 발생 증가와 관련이 있다. [1] 소금을 추가하면 토양 소금이 2에서 증가합니다. [2]