Ribbed Steel(늑골이 있는 강철)란 무엇입니까?
Ribbed Steel 늑골이 있는 강철 - The bond strength of bare round steel is significantly lower than that of ribbed steel, and the maximum bond strength is about 47. [1] The longitudinal and stirrup reinforcements were ribbed steel. [2]원형 강철의 결합 강도는 늑골이 있는 강철의 결합 강도보다 현저히 낮으며 최대 결합 강도는 약 47입니다. [1] 세로 및 등자 보강재는 늑골이 있는 강철이었습니다. [2]
ribbed steel bar 늑골이 있는 스틸 바
Out of these, four specimens are strengthened with the three different NSM reinforcing materials of ribbed steel bars, sand-coated glass fiber-reinforced polymer (GFRP) bars, and sand-coated reeds. [1] The corrosion behavior of two types of stirrups, a plain steel bar and a ribbed steel bar, were studied in this work. [2] As a ferromagnetic material, the magnetization of ribbed steel bars will change with the development of fatigue damage under cyclic loading, which can be used to evaluate the fatigue damage state of steel bars. [3] This method could prove extremely useful in determining the tensile state of ribbed steel bars that are embedded into the concrete structure. [4] Such laws have been assessed by comparing the FE model outcomes with the experimental results of pull-out tests carried out on ribbed steel bars embedded by means of lime-based grout in prisms made of tuff stones. [5]이 중 4개의 시편은 늑골이 있는 강철 막대, 모래 코팅된 유리 섬유 강화 폴리머(GFRP) 막대 및 모래 코팅 리드의 세 가지 다른 NSM 보강재로 강화되었습니다. [1] 이 연구에서는 두 가지 유형의 스터럽, 즉 일반 강철 막대와 늑골이 있는 강철 막대의 부식 거동을 연구했습니다. [2] 강자성 재료로서 늑골이 있는 철근의 자화는 주기적 하중 하에서 피로 손상이 발생함에 따라 변하며, 이는 철근의 피로 손상 상태를 평가하는 데 사용할 수 있습니다. [3] 이 방법은 콘크리트 구조물에 내장된 늑골이 있는 철근의 인장 상태를 결정하는 데 매우 유용할 수 있습니다. [4] 이러한 법칙은 FE 모델 결과를 응회암으로 만든 프리즘에서 석회 기반 그라우트로 매립된 늑골이 있는 철골에 대해 수행된 인발 시험의 실험 결과와 비교하여 평가되었습니다. [5]
ribbed steel reinforcement
This paper concerns the design of lap splice lengths for ribbed steel reinforcement bars embedded in concrete produced with coarse recycled concrete aggregates. [1] This paper is focused on verification and evaluation of the influence of the coarse aggregate size used in concrete mix composition on the bond properties between ribbed steel reinforcement and concrete. [2]이 논문은 거친 재활용 콘크리트 골재로 생산된 콘크리트에 내장된 골이 있는 철근 철근의 겹침 이음 길이 설계에 관한 것입니다. [1] 본 논문은 골재 보강재와 콘크리트 사이의 접착 특성에 대한 콘크리트 혼합 조성에 사용되는 굵은 골재 크기의 영향을 검증하고 평가하는 데 중점을 둡니다. [2]
ribbed steel reinforcing 늑골이 있는 강철 보강
Ribbed steel reinforcing bars with a diameter of 16 mm were used in the tests, which were placed horizontally in the forms. [1] One of the many alternative methods developed to address the corrosion problem of steel reinforcements is the use of hybrid reinforcement composed of a fiber-reinforced polymer (FRP)-wrapped ribbed steel reinforcing bars. [2]시험에는 직경 16mm의 골이 있는 강철 철근이 사용되었으며 거푸집에 수평으로 배치되었습니다. [1] 강철 보강재의 부식 문제를 해결하기 위해 개발된 많은 대안 방법 중 하나는 섬유 강화 폴리머(FRP)로 감싼 리브 강철 철근으로 구성된 하이브리드 보강재를 사용하는 것입니다. [2]