Q690 Steel(Q690 스틸)란 무엇입니까?
Q690 Steel Q690 스틸 - This paper describes an experimental and numerical study of the lateral-torsional buckling resistance of welded Q690 steel beams. [1] This paper presents an experimental study on axial compression behavior of DSTCs with ultra-high strength concrete and a rib-stiffened Q690 steel tube. [2] To investigate the local buckling behavior and obtain critical buckling stress of flange and web in Q690 steel stub columns at elevated temperatures, a total of 8 stub columns made of H-shape welded sections were tested under simultaneous axial compression and high temperatures. [3] 8 bolts and Q690 steel result in higher yield strength and tensile strength than common steel. [4] A finite element model (FEM) is determined in this study to investigate fire resistance and the behaviour of restrained high-strength (RHS) Q690 steel beams in fire considering the high-temperature Fields & Fields creep model. [5] However, this approach increases the potential risk of fracture for Q690 steel structures. [6] The experimental investigation indicated that (i) using high-strength Q690 steel could significantly contribute to a larger elastoplastic deformation capacity and delay the onset of post-peak behavior, even though a lower ductility capacity was provided; (ii) the proposed strength model could satisfactorily predict the moment-resisting capacity; (iii) the out-of-code HCFTST columns with reasonable design could demonstrate favorable seismic behavior and could be accepted as aseismatic components in earthquake-prone regions. [7] Presented in this paper are test results on mechanical properties of high strength Q690 steel after being exposed to high temperatures. [8]이 논문은 용접된 Q690 강철 빔의 측면 비틀림 좌굴 저항에 대한 실험 및 수치 연구를 설명합니다. [1] 본 논문은 초고강도 콘크리트와 리브 보강 Q690 강관을 사용한 DSTC의 축방향 압축 거동에 대한 실험적 연구를 제시한다. [2] 고온에서 Q690 강재 스터브 기둥의 국부 좌굴 거동을 조사하고 플랜지와 웨브의 임계 좌굴 응력을 얻기 위해 H형 용접 단면으로 구성된 총 8개의 스터브 기둥을 축방향 압축과 고온에서 동시에 시험했습니다. [3] 8볼트와 Q690강은 일반강보다 항복강도와 인장강도가 높습니다. [4] 본 연구에서는 고온 Fields & Fields Creep 모델을 고려하여 화재 시 구속된 고강도(RHS) Q690 강보의 내화성과 거동을 조사하기 위해 유한 요소 모델(FEM)을 결정했습니다. [5] 그러나 이 접근 방식은 Q690 강철 구조물의 잠재적인 파손 위험을 높입니다. [6] 실험 조사는 (i) 고강도 Q690 강을 사용하면 더 낮은 연성 용량이 제공되더라도 더 큰 탄성 변형 용량에 크게 기여할 수 있고 피크 후 거동의 시작을 지연시킬 수 있음을 나타냈습니다. (ii) 제안된 강도 모델은 모멘트 저항 용량을 만족스럽게 예측할 수 있습니다. (iii) 합리적인 설계의 코드 외 HCFTST 기둥은 유리한 지진 거동을 나타낼 수 있으며 지진이 발생하기 쉬운 지역에서 내진 구성요소로 받아들여질 수 있습니다. [7] 이 문서에서는 고온에 노출된 후 고강도 Q690 강의 기계적 특성에 대한 테스트 결과를 제공합니다. [8]
Strength Q690 Steel
The experimental investigation indicated that (i) using high-strength Q690 steel could significantly contribute to a larger elastoplastic deformation capacity and delay the onset of post-peak behavior, even though a lower ductility capacity was provided; (ii) the proposed strength model could satisfactorily predict the moment-resisting capacity; (iii) the out-of-code HCFTST columns with reasonable design could demonstrate favorable seismic behavior and could be accepted as aseismatic components in earthquake-prone regions. [1] Presented in this paper are test results on mechanical properties of high strength Q690 steel after being exposed to high temperatures. [2]실험 조사는 (i) 고강도 Q690 강을 사용하면 더 낮은 연성 용량이 제공되더라도 더 큰 탄성 변형 용량에 크게 기여할 수 있고 피크 후 거동의 시작을 지연시킬 수 있음을 나타냈습니다. (ii) 제안된 강도 모델은 모멘트 저항 용량을 만족스럽게 예측할 수 있습니다. (iii) 합리적인 설계의 코드 외 HCFTST 기둥은 유리한 지진 거동을 나타낼 수 있으며 지진이 발생하기 쉬운 지역에서 내진 구성요소로 받아들여질 수 있습니다. [1] 이 문서에서는 고온에 노출된 후 고강도 Q690 강의 기계적 특성에 대한 테스트 결과를 제공합니다. [2]
q690 steel beam Q690 스틸 빔
This paper describes an experimental and numerical study of the lateral-torsional buckling resistance of welded Q690 steel beams. [1] A finite element model (FEM) is determined in this study to investigate fire resistance and the behaviour of restrained high-strength (RHS) Q690 steel beams in fire considering the high-temperature Fields & Fields creep model. [2]이 논문은 용접된 Q690 강철 빔의 측면 비틀림 좌굴 저항에 대한 실험 및 수치 연구를 설명합니다. [1] 본 연구에서는 고온 Fields & Fields Creep 모델을 고려하여 화재 시 구속된 고강도(RHS) Q690 강보의 내화성과 거동을 조사하기 위해 유한 요소 모델(FEM)을 결정했습니다. [2]