Pump Units(펌프 유닛)란 무엇입니까?
Pump Units 펌프 유닛 - Due to the high sediment content in the Yellow River, the pump units in the pumping stations along the line are often eroded by sediment, causing the reduction of pump efficiency and structural damage. [1] At the same time deposits at the late stages of exploration, apart from the use of pump units, systems of reservoir pressure maintenance and hydraulic fracturing, require regular repair and restoration, measures against salt and heavy oil sediments, mechanical impurities, flooding, etc. [2] For the development of technologies in modern rocketry, improving the quality and accuracy of the production of turbines of turbopump units, an important task is to search for new and improve existing technological solutions for the manufacture of such parts with high surface quality. [3] The double-suction centrifugal pumps installed along the Yellow River in China face serious sediment erosion due to the high sediment content which causes the poor operation efficiency of the pump units. [4] Reliability, along with energy efficiency, is an important characteristic of pump units in various applications. [5] Pump units and operation durations were calculated based on estimated inundation volumes depending on the water inlet and water balance. [6] The research works show that 55–60 % of non-productive power loss in oil production belong to the FPS system, and the great part of it falls within the pump units. [7] In the flowing parts of liquid propellant rocket engines turbopump units, relatively short spatial channels, characterized by the presence of non-merged dynamic and temperature boundary layers prevail. [8] To assess the effectiveness of pump operation, 2 (two) pumping capacities are simulated, namely: 250 l / sec and 500 l / sec, each used 2 (two) pump units. [9] The proposed methodology is proved by the research of rotor dynamics on the example of turbopump units for liquid rocket engines and allows refining parameters of the nonlinear mathematical models describing forced oscillations of the rotor as a complicated mechanical system with nonlinearities. [10] Thus, the optimal control of pump units can help the utilities to decrease operational costs. [11] The obtained results show that the application of pump units is justified in terms of energy consumption. [12] Additionally, by applying a pair of pump units in tandem, the pump eliminates the structural flow ripple, caused by the limited number of pump elements, which exists in traditional pumps. [13] Aging leads to an over-expression of Na+/K+ pump units in liver and Na+/Ca2+ exchanger in brain cortex of rats. [14] Therefore, in order to elucidate the possible mechanism of 4 Hz and 8 Hz EMF effects on heart muscle function, in the present work the effects of 4 Hz and 8 Hz EMF exposures on heart muscle tissue hydration, the sensitivity of 4 Hz and 8 Hz EMF-induced tissue hydration to 10−4 M ouabain (Na+/K+ pump inhibition) and 10−9 M ouabain (activation of intracellular signaling system) as well as the effects of 4 Hz and 8 Hz EMF exposures on the number of Na+/K+ pump units in the membrane of both young and old rats have been studied. [15]황하의 침전물 함량이 높기 때문에 라인을 따라 양수장에 있는 펌프 장치가 침전물로 인해 침식되는 경우가 많아 펌프 효율이 떨어지고 구조적 손상이 발생합니다. [1] 동시에 펌프 장치의 사용을 제외하고 탐사 후기 단계의 퇴적물, 저수지 압력 유지 및 수압 파쇄 시스템은 정기적인 수리 및 복원, 염분 및 중질유 퇴적물, 기계적 불순물, 범람 등에 대한 조치가 필요합니다. [2] 현대 로켓 기술 개발, 터보 펌프 장치 터빈 생산의 품질 및 정확성 향상을 위해 중요한 임무는 표면 품질이 높은 부품 제조를 위한 새로운 기술 솔루션을 찾고 기존 기술 솔루션을 개선하는 것입니다. [3] 중국 황하를 따라 설치된 이중 흡입 원심 펌프는 침전물 함량이 높기 때문에 침전물 침식이 심해 펌프 장치의 작동 효율이 좋지 않습니다. [4] 에너지 효율성과 함께 신뢰성은 다양한 응용 분야에서 펌프 장치의 중요한 특성입니다. [5] 펌프 장치 및 작동 시간은 유입수 및 물 균형에 따른 추정 침수량을 기반으로 계산되었습니다. [6] 연구 결과에 따르면 석유 생산에서 비생산적인 전력 손실의 55-60%가 FPS 시스템에 속하며 그 중 많은 부분이 펌프 장치에 속합니다. [7] 액체 추진제 로켓 엔진 터보 펌프 장치의 흐르는 부분에서 병합되지 않은 동적 및 온도 경계 레이어의 존재를 특징으로 하는 상대적으로 짧은 공간 채널이 우세합니다. [8] 펌프 작동의 효율성을 평가하기 위해 각각 2개의 펌프 장치를 사용하는 250l/sec 및 500l/sec의 2개(2개) 펌핑 용량이 시뮬레이션됩니다. [9] 제안된 방법론은 액체 로켓 엔진용 터보 펌프 장치의 예에 대한 로터 역학 연구에 의해 입증되었으며 로터의 강제 진동을 비선형성을 갖는 복잡한 기계 시스템으로 설명하는 비선형 수학적 모델의 매개변수를 개선할 수 있습니다. [10] 따라서 펌프 장치를 최적으로 제어하면 유틸리티가 운영 비용을 줄이는 데 도움이 될 수 있습니다. [11] 얻은 결과는 펌프 장치의 적용이 에너지 소비 측면에서 정당하다는 것을 보여줍니다. [12] 또한 한 쌍의 펌프 장치를 나란히 적용함으로써 펌프는 기존 펌프에 존재하는 제한된 수의 펌프 요소로 인해 발생하는 구조적 흐름 리플을 제거합니다. [13] 노화는 간에서 Na+/K+ 펌프 단위의 과발현과 쥐의 뇌 피질에서 Na+/Ca2+ 교환기를 과발현시킵니다. [14] 따라서 심장 근육 기능에 대한 4Hz 및 8Hz EMF 효과의 가능한 메커니즘을 설명하기 위해 본 연구에서는 4Hz 및 8Hz EMF 노출이 심장 근육 조직 수화에 미치는 영향, 4Hz 및 8Hz의 감도 10-4 M ouabain(Na+/K+ 펌프 억제) 및 10-9 M ouabain(세포 내 신호전달 시스템 활성화)에 대한 EMF 유도 조직 수화 및 Na+/수에 대한 4Hz 및 8Hz EMF 노출 효과 어린 쥐와 늙은 쥐의 막에 있는 K+ 펌프 장치가 연구되었습니다. [15]
Heat Pump Units 히트펌프 유닛
Air heat pump units (HPUs) for space heating are used more widely than geothermal ones, mainly due to lower installation costs. [1] This paper studies the integration of heat pump units (HPUs) to enhance the thermal efficiency of a combined heat and power plant (CHPP). [2] In recent years, solar heat pump heating technology that uses clean solar energy combined with high-efficiency heat pump units is the development direction of clean heating in winter in northern regions. [3] 0 GW, consisting of 4174 heat pump units which are able to cover 641 PJ/a of process heat demand. [4] Additionally, the coefficient of performance of the subway source heat pump units was 4. [5] Results show that the coefficient of performance (COP) of heat pump units during the heating and cooling period is 3. [6] Based on the optimization approach, the optimized DRHPs are obtained for heat pump units with different output powers, and the heating capacity under per unit cost of the optimized DRHP is increased by 44. [7] The results show that the energy-saving benefits of absorption heat pump units are far greater than compression units. [8] In combination with heat pump units, expandergenerator units make it possible to create highly efficient power generating complexes that are capable of generating electricity without burning fuel. [9] The detection and diagnosis of faults is becoming necessary in ensuring energy savings in heat pump units. [10] This study provides an important reference for the combined and efficient application of CCHP systems and heat pump units. [11] In air-to-air heat pump units, the conventional calorimeter controls the air temperature and humidity conditions in each test chamber with separate air handling units consisting of a refrigerator, heater, humidifier, and supply fan, which results in high energy consumption. [12] The traditional system with heating devices and fan coils and an effective system with a single circuit of heat pump units are considered. [13] This paper is aimed at obtaining flow condensation heat transfer and pressure drop characteristics in a plate heat exchanger during the working conditions of the condenser of either organic Rankine cycle power systems or heat pump units. [14] The results showed that the new method more accurately analyzed the energy flow in indoor thermal environment design, and therefore can serve as an improved way of thinking about follow-up studies on the optimization of heat pump units and the operation strategies of floor radiant heating systems. [15] Heat pump charge amount is the subject of many research, but less studies have been done in the case of refrigerators and freezers where the system works in the transient condition, on the contrary to the heat pump units. [16] Finally, the pumping and condensing ratio curves under different conditions of winter heating conditions were determined, which could guide the optimal operation of heat pump units. [17] Approach 1 optimizes the load distribution between different heat pump units. [18]공간 난방용 공기 열 펌프 장치(HPU)는 주로 낮은 설치 비용으로 인해 지열 장치보다 널리 사용됩니다. [1] 이 논문은 열병합 발전소(CHPP)의 열 효율을 향상시키기 위한 히트 펌프 장치(HPU)의 통합을 연구합니다. [2] 최근 몇 년 동안 고효율 히트 펌프 장치와 결합 된 청정 태양 에너지를 사용하는 태양열 히트 펌프 난방 기술은 북부 지역의 겨울 청정 난방 개발 방향입니다. [3] 0GW, 641PJ/a의 공정 열 수요를 처리할 수 있는 4174개의 열 펌프 장치로 구성됩니다. [4] 또한 지하철 열원 히트펌프 유닛의 성능계수는 4로 나타났다. [5] 결과는 가열 및 냉각 기간 동안 히트 펌프 장치의 성능 계수(COP)가 3임을 보여줍니다. [6] 최적화 접근 방식을 기반으로 출력 전력이 다른 히트 펌프 장치에 대해 최적화된 DRHP를 얻고 최적화된 DRHP의 단위 비용당 난방 용량이 44 증가합니다. [7] 결과는 흡수 열 펌프 장치의 에너지 절약 이점이 압축 장치보다 훨씬 더 크다는 것을 보여줍니다. [8] 열 펌프 장치와 결합하여 팽창기 장치를 사용하면 연료를 태우지 않고도 전기를 생산할 수 있는 고효율 발전 단지를 만들 수 있습니다. [9] 열 펌프 장치의 에너지 절약을 보장하기 위해 결함 감지 및 진단이 필요해지고 있습니다. [10] 이 연구는 CCHP 시스템과 열 펌프 장치의 결합되고 효율적인 적용을 위한 중요한 참고 자료를 제공합니다. [11] 공랭식 히트펌프 장치에서 기존의 열량계는 냉장고, 히터, 가습기 및 공급 팬으로 구성된 별도의 공기 처리 장치로 각 테스트 챔버의 공기 온도 및 습도 조건을 제어하므로 높은 에너지 소비가 발생합니다. [12] 가열 장치 및 팬 코일이 있는 기존 시스템과 히트 펌프 장치의 단일 회로가 있는 효과적인 시스템이 고려됩니다. [13] 이 논문은 유기 랭킨 사이클 전력 시스템 또는 히트 펌프 장치의 응축기 작동 조건에서 판형 열교환기의 흐름 응축 열 전달 및 압력 강하 특성을 얻는 것을 목표로 합니다. [14] 결과는 새로운 방법이 실내 열 환경 설계에서 에너지 흐름을 보다 정확하게 분석함으로써 히트 펌프 장치의 최적화 및 바닥 복사 난방 시스템의 운영 전략에 대한 후속 연구에 대한 개선된 사고 방식을 제공할 수 있음을 보여주었습니다. . [15] 히트펌프 충전량에 대해서는 많은 연구가 이루어지고 있지만, 히트펌프 장치와 달리 시스템이 과도 상태로 작동하는 냉장고 및 냉동고의 경우에는 그에 대한 연구가 적은 실정이다. [16] 마지막으로 동절기 난방 조건의 다양한 조건에서 펌핑 및 응축 비율 곡선을 결정하여 히트 펌프 장치의 최적 작동을 안내할 수 있습니다. [17] 접근 방식 1은 서로 다른 히트 펌프 장치 간의 부하 분산을 최적화합니다. [18]
Rod Pump Units 로드 펌프 유닛
Computer simulation of the operation of three sucker-rod pump units with and without optimization has been carried out. [1] A significant part of oil production wells is operated by sucker rod pump units. [2] The analysis of the operation of sucker rod pumps for oil production at the Tuymazaneft NGDU fields of Bashneft-Dobycha LLC revealed the following main reasons for the failure of the underground part of well sucker rod pump units: blockage of suction and discharge valves (52. [3] Background Significant progress has been achieved in improving the design of sucker rod pump units (SRPU), which have the highest efficiency in comparison with alternative methods of mechanized production during the operation of low flow rate production wells. [4] The article describes examples of the operation of well sucker-rod pump units with different performance characteristics on wells with the same reservoir parameters. [5]최적화가 있거나 없는 3개의 빨판봉 펌프 장치 작동에 대한 컴퓨터 시뮬레이션이 수행되었습니다. [1] 유정의 상당 부분은 흡착봉 펌프 장치에 의해 작동됩니다. [2] Bashneft-Dobycha LLC의 Tuymazaneft NGDU 유전에서 석유 생산을 위한 흡착 로드 펌프의 작동 분석은 흡착 로드 펌프 장치의 지하 부분 고장에 대한 다음과 같은 주요 원인을 밝혔습니다. 흡입 및 배출 밸브의 막힘(52. [3] 배경 저유량 생산 유정의 작동 중에 기계화 생산의 대안적 방법과 비교하여 가장 높은 효율을 갖는 SRPU(Sucker Rod Pump Unit)의 설계를 개선하는 데 상당한 진전이 있었습니다. [4] 이 기사에서는 저수지 매개변수가 동일한 유정에서 성능 특성이 서로 다른 유정 빨판 로드 펌프 장치의 작동 예를 설명합니다. [5]
Centrifugal Pump Units 원심 펌프 장치
Materials and methods: research and calculations were carried out at the pumping station “Mezhdurechye”, “Management of Stavropolmeliovodkhoz”, equipped with three main centrifugal pump units and two pressure pipelines. [1] The centrifugal pump units are composed of a low-voltage power source, a frequency converter, a step-up transformer, a cable line, an electric drive and a centrifugal pump. [2] Currently, submersible induction motors are widely used in electric centrifugal pump units, which provide the bulk of oil production in Russia. [3] The relevance of the work is due to the widespread use of centrifugal pump units with frequency-controlled induction motors. [4]재료 및 방법 : 3 개의 주요 원심 펌프 장치와 2 개의 압력 파이프 라인이 장착 된 펌핑 스테이션 "Mezhdurechye", "Stavropolmeliovodkhoz 관리"에서 연구 및 계산이 수행되었습니다. [1] 원심 펌프 장치는 저전압 전원, 주파수 변환기, 승압 변압기, 케이블 라인, 전기 드라이브 및 원심 펌프로 구성됩니다. [2] 현재 수중 유도 전동기는 러시아에서 석유 생산의 대부분을 제공하는 전기 원심 펌프 장치에 널리 사용됩니다. [3] 이 작업의 관련성은 주파수 제어 유도 모터가 있는 원심 펌프 장치의 광범위한 사용 때문입니다. [4]