Property Improvement(속성 개선)란 무엇입니까?
Property Improvement 속성 개선 - Thereafter, illustrations are provided on how device function and property improvements are achieved with a delicate use of composite materials. [1] A major challenge is to dissect the interconnectedness between the influencing factors and their relative contributions to the property improvement of steel slag. [2] The variant process of FSW, friction stir processing (FSP) modify the microstructure of material for property improvement. [3] Especially in the QCT-t processes, the microstructure refinement and the property improvement were highly significant. [4] Modification of semiconductor thin films by Swift Heavy Ion (SHI) beam irradiation is a unique technique for property improvement. [5] The research findings revealed the effectiveness of complex additives and substantiated the regularity that if each factor is separatelyfacilitative forproperty improvement, then, when they are combined, the effect is multiplied. [6] The results show that the seeds play an important role in the crystallization inducement, and microstructural and property improvement of the glass, especially for the glass powder without the nucleating agent of P 2 O 5. [7] Previously, we have reported that use of these MFC composite materials in fiber-based applications allow generally improved wet and dry mechanical properties with concomitant opportunities for cost savings, property improvements, or grade developments. [8] Our results suggest that the Si addition can be a favorable candidate in various metastable HEAs for the further property improvement. [9] One of the key challenges to porosity reduction and property improvement during sintering is abnormal grain growth (AGG). [10] Homogeneous spreading of SiC particles in addition to spherodization of silicon needles and their spreading through matrix were found to be dominant factors for property improvement in stirring zone. [11] Moreover, the organo-modification of the inner liner composition also leads to a property improvement of about 50%. [12] Property improvements will be demonstrated using both new and existing data from Europe and North America. [13] First, the process with its different characteristics and the underlying theory is presented and then property improvements are discussed by comparing MMNCs to their matrix materials. [14] The property improvements are due to the formation of denser structure and oxideTiO그런 다음 복합 재료를 섬세하게 사용하여 장치 기능 및 특성 향상을 달성하는 방법에 대한 일러스트레이션이 제공됩니다. [1] 주요 과제는 영향 요인과 철강 슬래그의 특성 개선에 대한 상대적 기여 간의 상호 연결성을 분석하는 것입니다. [2] FSW의 변형 공정인 FSP(마찰 교반 공정)는 물성 개선을 위해 재료의 미세 구조를 수정합니다. [3] 특히 QCT-t 공정에서는 미세조직 미세화와 물성향상이 매우 크게 나타났다. [4] SHI(Swift Heavy Ion) 빔 조사에 의한 반도체 박막의 변형은 물성 향상을 위한 독특한 기술입니다. [5] 연구결과는 복합첨가제의 효과를 나타내었고, 각각의 요인이 따로따로 물성향상을 촉진한다면 복합첨가시 효과가 배가된다는 규칙성을 입증하였다. [6] 결과는 종자가 결정화 유도, 특히 P 2 O 5 의 핵제가 없는 유리 분말에서 유리의 미세 구조 및 특성 개선에 중요한 역할을 한다는 것을 보여줍니다. [7] 이전에 우리는 섬유 기반 응용 분야에서 이러한 MFC 복합 재료를 사용하면 일반적으로 습윤 및 건식 기계적 특성을 개선하고 비용 절감, 특성 개선 또는 등급 개발 기회를 제공한다고 보고했습니다. [8] 우리의 결과는 Si 첨가가 추가적인 특성 개선을 위해 다양한 준안정 HEA에서 유리한 후보가 될 수 있음을 시사합니다. [9] 소결 중 다공성 감소 및 특성 개선의 주요 과제 중 하나는 비정상적인 입자 성장(AGG)입니다. [10] 실리콘 니들의 구형화와 함께 SiC 입자의 균일한 퍼짐과 매트릭스를 통한 퍼짐이 교반 영역의 물성 향상에 지배적인 요인인 것으로 밝혀졌다. [11] 더욱이, 내부 라이너 조성물의 유기 개질은 또한 약 50%의 특성 개선을 유도한다. [12] 부동산 개선은 유럽과 북미의 신규 및 기존 데이터를 모두 사용하여 시연됩니다. [13] 먼저 특성이 다른 공정과 기본 이론을 제시한 다음 MMNC를 매트릭스 재료와 비교하여 특성 개선에 대해 논의합니다. [14] 특성 개선은 더 조밀한 구조와 oxideTiO<inf>2</inf> 필름의 형성으로 인한 것입니다. [15] 이 제안된 시스템에서는 부동산 개선 및 주택 건설에 대한 인센티브가 제거됩니다. [16] 그럼에도 불구하고 낮은 유연성과 인성으로 인해 동적 하중 응용 분야에서 널리 수용되기 전에 물성 개선이 필요합니다. [17] 높은 강도와 인성을 지닌 CoCrNi 중엔트로피 합금(MEA)을 바인더 금속으로 채택하는 것은 서멧의 물성 향상을 위한 솔루션이 될 수 있습니다. [18] 나노 스케일에서 마이크로 스케일에 이르기까지 계층적 다공성 구조 및 전기 전도성 백본 설계에 의해 본질적으로 제어되는 슈퍼 커패시터의 특성 향상을 위해서는 이온과 전자의 이동 거동을 최적화하는 것이 핵심입니다. [19] 탄화물, 산화물, 플라이애시 및 강철 분말과 같은 고체 보강재로 분산된 합금 매트릭스는 공정 매개변수의 유연성과 함께 적절한 열처리를 맞춤으로써 특성 개선에 기여합니다. [20] 세 종류의 실란 중 물성 향상에 가장 효과적인 것은 TMPS였다. [21] 추가적인 특성 개선을 위해서는 더 균일한 나노 및 메조스케일 에폭시 분포가 여전히 필요합니다. [22] 결과는 공냉식 개질로 인한 물성저하를 폐열회수에 의한 물성향상으로 만회할 수 있음을 보여준다. [23] SRSO와 SPCNSL을 비교하면서 15개의 탄소 원자 측쇄를 갖는 PCNSL보다 측쇄에 최대 18개의 탄소 원자를 보유하기 때문에 SRSO만으로 더 나은 인터칼레이션 및 특성 개선이 달성되었음을 알 수 있다. [24] 한편, 연신비 및/또는 블렌드 조성을 조정함으로써 열화율 및 열역학적 특성 개선에 대한 제어가 달성되었다. [25] 현미경 검사는 섬유에 나노클레이 주입이 섬유-매트릭스 계면 및 하중 전달 특성을 개선하여 나노클레이 주입 바나나 섬유 강화 에폭시 복합재의 더 높은 수준의 특성 개선으로 이어지는 것으로 나타났습니다. [26] 폐기물을 건설 원자재로 사용하고 모래 및 자갈과 같은 천연 자원의 추출을 최소화하면 도시 지역에서 이러한 광미의 축적을 줄일 수 있어 다음과 같은 건물 이점을 제공하는 기술 솔루션이 됩니다. 밀도 감소, 배수 및 단열 및 방음 특성 개선. [27] 더욱 현저하게는, 이러한 특성 개선은 동시에 멤브레인의 열-기계적 특성과 산화 안정성을 증가시키면서 달성될 수 있었습니다. [28] 그러나 (1)의 열경화성 물질은 열역학적 물성, 유전성, 내산소투과성 등의 물성 향상의 여지가 있다. [29] 점점 더 자주 고려되는 고온 재료인 γ-TiAl 합금은 특성 개선에 대한 점점 더 높은 요구 사항을 충족해야 하는 과제에 직면해 있습니다. [30] 지구 남반구에 뿌리를 둔 연구 개념인 도시 비공식 및 비공식 정착은 도시 연구에 내재된 재산 개선, 소유권 보장, 자원의 불균등한 분배 및 비대칭 권력 관계 사이의 관계를 드러낼 가능성이 있습니다. [31] SSBR/ENR 복합재료의 물성향상을 검증하기 위하여 열분해거동, 인장강도, 경도값, 마찰계수 및 탄성특성을 조사하였다. [32] SEM 결과는 CNT가 균일하게 분산되고 NBR 매트릭스와 강한 필러-매트릭스 상호작용을 가짐을 보여주었으며, 이는 특성 개선과 상관관계가 있을 수 있습니다. [33] 주변 및 고온 경도 증가, 내산화성 증가와 같은 특성 개선이 보고되었습니다. [34] 현미경 및 유변학에서 볼 수 있듯이 p-HNT 및 PP-g-HNT 충전제를 사용하여 SSSP로 제조한 하이브리드는 매우 유사하고 높은 수준의 분산을 가지므로 특성 개선의 요인으로 분산 품질이 제거됩니다. [35] 나노복합체의 물성 향상은 GNP가 고분자 매트릭스에 분산되어 있기 때문이다. [36] 그러나 HER의 EEW(Epoxy Equivalent Weight)와 EEW 제어의 어려움으로 인해 물성 개선 수준과의 관계는 확립되지 않았습니다. [37] 물성 개선의 근본적인 이유는 전자 구조를 계산하여 분석되었습니다. [38] 농도와 물성향상 사이에는 관계가 존재하였다. [39]
Mechanical Property Improvement 기계적 물성 개선
Owing to its high melting point and stiff nature, however, mechanical property improvement is warranted in the form of copolymerization. [1] The mechanical property improvement of rolled Cu foil was due to the grain refinement and the increase of dislocation density. [2] 0 wt% microcapsules had the highest mechanical property improvement and the composite films with 5. [3] Aimed at the mechanical property improvement in the high pressure die casting (HPDC) process for the aluminium alloy, two sets of shot curves (the baseline and the optimized condition) are designed to study their influence on the distributions of the ultimate tensile strength (UTS) and the elongation (El) for the as-cast ASTM tensile samples. [4] The mechanical property improvement of M 7C3 carbides in hypereutectic Fe–Cr–C hardfacing coating is required for its widespread application and longer service life. [5] Therefore, LSP had a positive effect on grain refinement, formation of low-angle grain boundaries, and mechanical property improvements. [6] All about the piezoelectric and mechanical property improvement were explained in this paper. [7] Findings presented herein indicate that it is viable to utilize ECAP as a post-AM processing tool for mechanical property improvement of laser powder bed fused microstructures with the virtue of enhanced densification. [8] Our research revealed not only the significant effect of pre-deformation on CONs formation and refinement, but also the deformation mechanism of CONs, which shed new light on the microstructural optimization and mechanical property improvement of CON-strengthened alloys. [9] For these applications, most fiber alignment electrospinning research has focused on either mechanical property improvement or dielectric property improvement alone, but not both simultaneously. [10] The EPDM polymer structure, compound formulation, mixing performance, compound rheology, vulcanization characteristics, and mechanical property improvements are discussed. [11] The computational study showed that creation of weak interfaces along with the “interconnection” works two-fold in terms of mechanical property improvement. [12] In this study, was investigated the optimization of the factors that significantly influenced the mechanical property improvement of cassava starch nanocomposites through complete factorial design 23. [13] The polymer nanohybrids have been prepared for the mechanical property improvement without imparting high brittleness for practical applications. [14] A comparison between reinforcement shapes and the type of external field used to achieve mechanical property improvements in printed composites is addressed. [15] Previous work has demonstrated mechanical property improvements up to ∼50% from nylon 6,6 fibre-polyester resin VPPMCs, compared with control (unstressed) counterparts. [16] The carbon and SiC crystallinities had a great impact on the oxidation and mechanical property improvement of hybrid nanofibers. [17] 2 wt% functionalized-CNTs (f-CNTs), notable mechanical property improvements were observed - up to 31. [18] The increases in mechanical property improvements are accompanied by surface roughness increases as indicated by AFM studies. [19] In conclusion, preparation and 3D-printing of a 100% biobased renewable feedstock material with substantial mechanical property improvements were successfully demonstrated, which can open up new window of opportunities in the AM industry. [20] This work proved the feasibility of mechanical property improvement in BF production by controlling the iron redox index. [21] Laser surface melting (LSM) of a single-crystal substrate of a MoSi2-Mo5Si3 eutectic composite has been performed to check the feasibility of mechanical property improvement through microstructure refinement and seeded growth of the eutectic composite on top of the seed composite single crystal by additive manufacturing processes using scanned laser beam. [22]그러나 높은 융점과 강성으로 인해 공중합 형태의 기계적 물성 향상이 보장됩니다. [1] 압연 Cu 호일의 기계적 물성 개선은 결정립 미세화 및 전위 밀도 증가에 기인한다. [2] 0wt% 마이크로캡슐이 기계적 물성향상이 가장 높았고 복합필름은 5로 나타났다. [3] 알루미늄 합금에 대한 고압 다이캐스팅(HPDC) 공정의 기계적 특성 개선을 목표로 두 세트의 샷 곡선(기준선 및 최적화 조건)이 극한 인장 강도(UTS) 분포에 미치는 영향을 연구하기 위해 설계되었습니다. ) 및 주조된 ASTM 인장 샘플에 대한 연신율(El). [4] M의 기계적 물성 향상 과공정 Fe-Cr-C 경화 코팅의 7C3 탄화물은 광범위한 적용과 더 긴 서비스 수명을 위해 필요합니다. [5] 따라서 LSP는 결정립 미세화, 저각 결정립계 형성 및 기계적 물성 개선에 긍정적인 영향을 미쳤다. [6] 압전 및 기계적 특성 개선에 대한 모든 것이 이 문서에서 설명되었습니다. [7] 여기에 제시된 결과는 강화된 조밀화 덕분에 레이저 분말 베드 융합 미세구조의 기계적 특성 개선을 위한 사후 AM 처리 도구로 ECAP를 활용하는 것이 실행 가능하다는 것을 나타냅니다. [8] 우리의 연구는 CON 형성 및 미세화에 대한 사전 변형의 중요한 영향뿐만 아니라 CON 강화 합금의 미세 구조 최적화 및 기계적 특성 개선에 대한 새로운 조명을 제공하는 CON의 변형 메커니즘을 밝혀냈습니다. [9] nan [10] EPDM 고분자 구조, 복합 조성, 혼합 성능, 복합 유동학, 가황 특성 및 기계적 물성 개선에 대해 논의합니다. [11] 계산 연구는 "상호 연결"과 함께 약한 인터페이스를 생성하는 것이 기계적 특성 개선 측면에서 두 가지 효과가 있음을 보여주었습니다. [12] 본 연구에서는 완전한 요인설계를 통해 카사바 전분 나노복합체의 기계적 물성 향상에 유의한 영향을 미치는 요인들의 최적화를 조사하였다23. [13] 고분자 나노하이브리드는 높은 취성을 부여하지 않으면서 기계적 물성을 향상시키기 위해 제조되어 실용화되었다. [14] 강화 형태와 인쇄된 복합 재료의 기계적 특성 개선을 달성하는 데 사용되는 외부 필드 유형 간의 비교를 다룹니다. [15] 이전 연구는 대조(비응력) 대응물과 비교하여 나일론 6,6 섬유-폴리에스터 수지 VPPMC에서 기계적 특성이 최대 50% 향상되었음을 입증했습니다. [16] 탄소 및 SiC 결정도는 하이브리드 나노섬유의 산화 및 기계적 물성 개선에 큰 영향을 미쳤다. [17] 2wt% 기능화된 CNT(f-CNT), 최대 31개의 기계적 특성 개선이 관찰되었습니다. [18] 기계적 특성 개선의 증가는 AFM 연구에서 나타난 바와 같이 표면 거칠기 증가를 동반합니다. [19] 결론적으로, 기계적 특성이 상당히 개선된 100% 바이오 기반 재생 가능한 공급원료 재료의 준비 및 3D 프린팅이 성공적으로 시연되었으며 이는 AM 산업에서 새로운 기회의 창을 열 수 있습니다. [20] 이 연구는 철 산화환원 지수를 조절하여 BF 생산에서 기계적 물성 개선의 가능성을 입증했습니다. [21] MoSi2-Mo5Si3 공정복합체 단결정 기판의 LSM(Laser Surface Melting) 공정을 통해 미세구조 미세화를 통한 기계적 물성 향상 및 시드복합체 단결정 위에 첨가제에 의한 시드성장을 통한 공정복합체의 시드성장 가능성을 확인하였다. 스캔된 레이저 빔을 사용하는 제조 공정. [22]
Material Property Improvement 물성 개선
However, over the last 50 years, a significant body of research has been carried out on ex-situ SiC particle reinforced Al-based metal matrix composites from material fabrication process, material property improvement, material mechanical test to machining performance such as machined surface integrity, cutting process simulation and modeling, parameter optimization and fatigue characteristics. [1] A comprehensive anti-seismic measure is proposed based on material property improvement and structural optimization, decreasing the maximum crack width and the total crack length by 21% and 89. [2] The discussion includes material property improvements, processing methods and improving interface adhesion that may arise when compounding the materials. [3]그러나 지난 50년 동안 재료 제조 공정, 재료 특성 개선, 재료 기계적 테스트에서 가공된 표면 무결성과 같은 기계 성능에 이르기까지 Ex-situ SiC 입자 강화 Al 기반 금속 매트릭스 복합 재료에 대한 상당한 연구가 수행되었습니다. , 절단 공정 시뮬레이션 및 모델링, 매개변수 최적화 및 피로 특성. [1] 재료 특성 개선 및 구조 최적화를 기반으로 포괄적인 내진 대책을 제안하여 최대 균열 폭과 총 균열 길이를 21% 및 89% 감소시킵니다. [2] 논의에는 재료 특성 개선, 처리 방법 및 재료를 합성할 때 발생할 수 있는 계면 접착력 개선이 포함됩니다. [3]
Electrical Property Improvement
When the nano-SiO2 particles were more dispersed in the SEBS phase, the expected electrical property improvement was not obtained. [1] Herein, the optical field distribution and electrical property improvements of the InGaN laser diode with an emission wavelength around 416 nm are theoretically investigated by adjusting the relative thickness of the first or last barrier layer in the three In0. [2] In this work, we report the role of SiO2 nanoparticles grafted by newly designed and synthesized voltage stabilizer on electrical property improvement of isotactic polypropylene. [3]나노-SiO2 입자가 SEBS 상에 더 많이 분산되어 있을 경우, 기대했던 전기적 특성 개선을 얻지 못하였다. [1] 여기서, 416 nm 부근의 발광 파장을 갖는 InGaN 레이저 다이오드의 광학적 필드 분포 및 전기적 특성 개선은 3개의 In0에서 첫 번째 또는 마지막 배리어 층의 상대적 두께를 조정함으로써 이론적으로 조사된다. [2] 이 연구에서는 이소택틱 폴리프로필렌의 전기적 특성 향상에 대한 새로 설계 및 합성된 전압 안정제에 의해 그래프트된 SiO2 나노 입자의 역할을 보고합니다. [3]
Tensile Property Improvement
Another objective linked to the tensile property improvement was to develop a synthetic route to functionalize a commercially available hyperbranched polymer to enhance the compatibility of PLA/PE blends. [1] The use of gel spinning technology in the formation of polyacrylonitrile (PAN)-based carbon fibers has led to significant tensile property improvements. [2]인장 특성 개선과 관련된 또 다른 목적은 PLA/PE 블렌드의 상용성을 향상시키기 위해 상업적으로 이용 가능한 하이퍼브랜치 폴리머를 기능화하는 합성 경로를 개발하는 것이었습니다. [1] 폴리아크릴로니트릴(PAN) 기반 탄소 섬유의 형성에 겔 방사 기술을 사용하여 인장 특성이 크게 향상되었습니다. [2]
Soil Property Improvement
Compared to the organic fertilizer application alone, the effects of organic fertilizer combined with chemical fertilizer on crop yield was better, but poorer on soil property improvement. [1] Hence, integrated use of soil bund with grass strip has a meaningful contribution for selected soil property improvement that enhances soil fertility and crop productivity. [2]유기질비료 단독시비에 비해 유기비료와 화학비료를 병행한 경우 작물 수확량에 미치는 영향은 더 좋았으나 토양 물성 개선에 미치는 영향은 더 낮았다. [1] 따라서, 잔디 스트립과 토양 제방의 통합 사용은 토양 비옥도 및 작물 생산성을 향상시키는 선택된 토양 특성 개선에 의미 있는 기여를 합니다. [2]
Surface Property Improvement 표면 물성 개선
8CrFeCoNiCu HEA was found to be the most suitable for surface property improvements of aluminum alloys. [1] Boriding or boronizing is a type of surface property improvement process applied to metal or some non-metal materials by diffusion. [2]8CrFeCoNiCu HEA는 알루미늄 합금의 표면 특성 개선에 가장 적합한 것으로 밝혀졌다. [1] 붕소화 또는 붕소화는 금속 또는 일부 비금속 재료에 확산에 의해 적용되는 표면 특성 개선 공정의 일종입니다. [2]
property improvement without
(1) reduction of recycled aggregate porosity, (2) reduction of old mortar layer on recycled aggregate surface, and (3) property improvement without recycled aggregate modification (i. [1] The polymer nanohybrids have been prepared for the mechanical property improvement without imparting high brittleness for practical applications. [2](1) 재활용 골재 공극률 감소, (2) 재활용 골재 표면의 오래된 모르타르층 감소, (3) 재활용 골재 개질 없이 물성 개선 (i. [1] 고분자 나노하이브리드는 높은 취성을 부여하지 않으면서 기계적 물성을 향상시키기 위해 제조되어 실용화되었다. [2]