Powder Cores(분말 코어)란 무엇입니까?
Powder Cores 분말 코어 - The two chosen core types are ferrite cores and powder cores, and the two chosen winding types are copper foil and PCB. [1] The purpose of this research is to model coupled inductors with powder cores and present a simple magnetic design method. [2] In this paper, analysis and calculation of the current ripple are presented for a three-phase VSI with powder cores-based inductors, which reveals the calculation error of current ripple caused by the soft saturation nature of powder cores. [3] Powder cores have been gaining much attention as one of the attractive magnetic cores used in power converters due to their superior features such as high saturation flux density and their capability to suppress fringing flux due to the distributed airgaps. [4] Inductors realized with high permeable MnZn ferrite require, unlike iron-powder cores with an inherent dis-tributed gap, a discrete air gap in the magnetic circuit to prevent saturation of the core material and/or tune the inductance value. [5] The utilization of powder cores for many power electronic applications has drawn a significant amount of attention owing to their attractive magnetic properties. [6]선택된 두 가지 코어 유형은 페라이트 코어와 분말 코어이고 두 가지 선택된 권선 유형은 동박 및 PCB입니다. [1] 이 연구의 목적은 분말 코어를 갖는 결합 인덕터를 모델링하고 간단한 자기 설계 방법을 제시하는 것입니다. [2] 이 논문에서는 분말 코어 기반 인덕터를 사용하는 3상 VSI에 대한 전류 리플의 분석 및 계산을 제시하며, 이는 분말 코어의 부드러운 포화 특성으로 인해 발생하는 전류 리플의 계산 오류를 나타냅니다. [3] 분말 코어는 높은 포화 자속 밀도와 같은 우수한 특성과 분포된 에어갭으로 인한 프린징 자속을 억제하는 능력으로 인해 전력 변환기에 사용되는 매력적인 자기 코어 중 하나로 많은 주목을 받고 있습니다. [4] 고투자율 MnZn 페라이트로 구현된 인덕터는 고유한 분산 갭이 있는 철-분말 코어와 달리 코어 재료의 포화를 방지하고 인덕턴스 값을 조정하기 위해 자기 회로에 이산 에어 갭이 필요합니다. [5] 많은 전력 전자 응용 분야에 대한 분말 코어의 활용은 매력적인 자기 특성으로 인해 상당한 관심을 끌었습니다. [6]
core shell structured 코어 쉘 구조화
Fe-based amorphous magnetic powder cores (AMPCs) with excellent comprehensive properties were successfully fabricated via using the uniform double insulating layer core-shell structured FeSiBPC/Fe3O4@Epoxy resin (EP). [1]균일한 이중 절연층 코어-쉘 구조의 FeSiBPC/Fe3O4@Epoxy 수지(EP)를 사용하여 포괄적인 특성이 우수한 Fe 기반 비정질 자성 분말 코어(AMPC)를 성공적으로 제조했습니다. [1]
Magnetic Powder Cores 마그네틱 파우더 코어
The soft magnetic powder cores (SMPCs) were then produced from the mixture of the qualified powders with 1 wt% epoxy resin as bonding materials by cold pressing under a compact pressure of 1600 MPa. [1] Fe-based amorphous magnetic powder cores (AMPCs) with excellent comprehensive properties were successfully fabricated via using the uniform double insulating layer core-shell structured FeSiBPC/Fe3O4@Epoxy resin (EP). [2] Toroid-shaped Fe-based soft magnetic powder cores (SMPCs) were prepared by cold pressing commercial FeSiCr and carbonyl iron powder (CIP) insulated with epoxy resin. [3] 4Tix soft magnetic powder cores (SMPCs) were studied systematically. [4] Soft magnetic powder cores are attractive due to their loss at medium frequency. [5] Thermosetting organic resins are widely applied as insulating coatings for soft magnetic powder cores (SMPCs) because of their high electrical resistivity. [6] In this study, the soft magnetic properties of Fe78Si9B13 amorphous magnetic powder cores (AMPCs) were enhanced by coordinately adjusting the technological parameters, including the particle size distribution, molding pressure, and coating agent content, in the industrial condition. [7] A high-filling alumina/epoxy nanocomposite with improved thermal stability and insulation performance has been successfully designed as an organic–inorganic coating layer for the toroid-shaped FeSiBPNbCr amorphous magnetic powder cores (AMPCs). [8] Soft magnetic powder cores with their high saturation flux density and low core loss are excellent alternatives for filter inductors in inverter-based applications. [9] The core-shell structured FeSiBCCr@TiO2 amorphous magnetic powder cores (AMPCs) with excellent comprehensive magnetic properties were successfully prepared using spherical amorphous powders with high quality insulating layer. [10] Owing to a uniform air-gap distribution of the magnetic powder materials, it is found that the conventional structure of a three-phase inductor made of magnetic powder cores will cause the three-phase magnetic flux paths to be unequal, thereby making the three-phase input voltages of a pulsewidth modulation (PWM) rectifier imbalanced. [11]연자성 분말 코어(SMPC)는 1600MPa의 압축 압력 하에서 냉간 압착에 의해 결합 재료로 1wt% 에폭시 수지와 적격 분말의 혼합물에서 생성되었습니다. [1] 균일한 이중 절연층 코어-쉘 구조의 FeSiBPC/Fe3O4@Epoxy 수지(EP)를 사용하여 포괄적인 특성이 우수한 Fe 기반 비정질 자성 분말 코어(AMPC)를 성공적으로 제조했습니다. [2] nan [3] nan [4] nan [5] nan [6] 이 연구에서 Fe78Si9B13 비정질 자성 분말 코어(AMPC)의 연자성 특성은 산업 조건에서 입자 크기 분포, 성형 압력 및 코팅제 함량을 포함한 기술적 매개변수를 조정하여 조정함으로써 향상되었습니다. [7] 열 안정성과 절연 성능이 향상된 고충진 알루미나/에폭시 나노복합체가 환상체 모양의 FeSiBPNbCr 비정질 자성 분말 코어(AMPC)용 유무기 코팅층으로 성공적으로 설계되었습니다. [8] 높은 포화 자속 밀도와 낮은 코어 손실을 가진 연자성 분말 코어는 인버터 기반 애플리케이션에서 필터 인덕터의 탁월한 대안입니다. [9] 우수한 종합 자기 특성을 가진 코어 쉘 구조의 FeSiBCCr@TiO2 비정질 자성 분말 코어(AMPC)는 고품질 절연층이 있는 구형 비정질 분말을 사용하여 성공적으로 준비되었습니다. [10] 자성 분말 재료의 균일한 에어 갭 분포로 인해, 자성 분말 코어로 만들어진 3상 인덕터의 기존 구조는 3상 자속 경로가 불균등하게 되어 3상 인덕터를 만드는 것으로 밝혀졌습니다. 펄스폭 변조(PWM) 정류기의 위상 입력 전압이 불균형합니다. [11]
Amorphou Powder Cores
The Fe-based soft magnetic amorphous powder cores (AMPCs) with excellent comprehensive magnetic properties were successfully designed and fabricated using the core-shell structured FeSiBCCr/TiO2 composite powders. [1] The effect of FeSi powder with volume fraction of 0–40% on the soft magnetic properties of the FeSiBPNb amorphous powder cores has been systematically investigated in this study. [2]포괄적인 자기 특성이 우수한 Fe 기반 연자성 비정질 분말 코어(AMPC)가 코어 쉘 구조의 FeSiBCCr/TiO2 복합 분말을 사용하여 성공적으로 설계 및 제조되었습니다. [1] FeSiBPNb 비정질 분말 코어의 연자성 특성에 대한 0-40%의 부피 분율을 갖는 FeSi 분말의 영향이 이 연구에서 체계적으로 조사되었습니다. [2]
Iron Powder Cores 철 분말 코어
The quantitative contribution of inclusions to coercive field in iron powder cores with different amounts of Si oxide inclusions was separated from that of other microstructural factors and analyzed. [1] The effect of porosity on coercive force in iron powder cores with different porosities was analyzed quantitatively. [2]Si 산화물 개재물의 양이 다른 철 분말 코어의 보자력장에 대한 개재물의 정량적 기여를 다른 미세구조 요인과 분리하여 분석하였다. [1] 다공성이 다른 철 분말 코어의 보자력에 대한 다공성의 영향을 정량적으로 분석했습니다. [2]