Photocurrent Generation(광전류 생성)란 무엇입니까?
Photocurrent Generation 광전류 생성 - The photocurrent generation in photovoltaics relies essentially on the interface of p-n junction or Schottky barrier with the photoelectric efficiency constrained by the Shockley-Queisser limit. [1] The increasing requirement for efficient and sustainable energy generation technology demands an understanding of the mechanisms of photocurrent generation in photovoltaic systems. [2] The model used in the calculations takes into account the features of photocurrent generation under conditions of medium or high levels of injection of charge carriers at an arbitrary ratio between the diffusion length and the thickness of the semiconductor wafer. [3] A correlation between responsivity (R) and power exponent (γ) indicates localized trap states plays a crucial role in photocurrent generation, commonly known as photogating. [4] Electron-hole separation is a crucial process for the photocurrent generation in organic solar cells, where the interaction of molecular photocells and its influence on the energy conversion efficiency are studied by means of an attractive Hubbard model on an excitonic-state lattice, whose impurity sites originated from the local electron-hole interaction inhibit a reciprocal-space analysis. [5] In addition, plasmonic effects coupled with self-powered photodetectors will further enhance light absorption and scattering, which contribute to the improvement of the device’s photocurrent generation. [6] In this study, we achieved a 35-fold enhancement in photocurrent generation of the cyanobacterium Synechocystis sp. [7] We analyze the influence of the mirror layer thickness on the light absorption, photocurrent generation, and transmission as well as color neutrality of the device. [8] This chapter is focused on four topics: (i) the use of NPs for the improvement of valuable secondary metabolites production in vitro, (ii) application of NPs for the mitigation of abiotic stresses (drought, salinity waterlogging, soil acidity, UV and γ-radiation, heat, cold, frost, and toxic metal stress) in plants, (iii) use of photosynthetic apparatus components in biohybrid systems designed for photocurrent generation and (iv) plants with augmented functions created using NPs and the nanobionic approach. [9] Further, the photocurrent generation and photoswitching phenomenon of the so-obtained MoS2-WS2 heterostructures were studied. [10] This work reports on the simulation-guided fabrication of Au (i) planar diodes and (ii) embedded IR nanoantennas interfaced with both n-/p-type Si and GaAs semiconductors in order to elucidate the impact of their electronic properties on photocurrent generation. [11] We demonstrate the extent of how this transmission spectrum can be engineered by varying the layer thicknesses of the reflector and we show how the reflecting metal layers in the back reflector influence the transmission and photocurrent generation of the spectrally selective solar cell. [12] Achieving high-efficiency organic solar cells (OSCs) requires well balancing the trade-off between the voltage loss and photocurrent generation of bulk heterojunction (BHJ) blends. [13] A mechanism was proposed for photocurrent generation in the photogalvanic cell. [14] The photocurrent generation in photovoltaics relies essentially on the interface of p-n junction or Schottey barrier with the photoelectric efficiency constrained by the Shockley-Queisser limit. [15] The low-midpoint potential of PYO led to O2 reduction side-reactions, which competed significantly against photocurrent generation; the tuning of mediator concentration was important for outcompeting the side-reactions whilst avoiding acute cytotoxicity. [16] The minority carrier mobility influences directly the collection of charge carriers upon illumination, which has a direct impact on the photocurrent generation. [17] Additionally, the position of photocurrent generation was investigated at the graphene/Bi2Te3 NWs junction. [18] This multichannel method can be employed to analyze a variety of nearly unexplored properties in single-molecule junctions such as photoconductance and photocurrent generation and allows a characterization of the molecular junctions by spectroscopic means as well. [19] More dark states are expected to be available for the photocurrent generation. [20] However, many studies only focused on the optimisation of photocurrent generation and light transmission and ignored the colour-fidelity of devices. [21] Here, we suggest the precise performance analysis model for the Schottky-junction-based near-field TPV system, including photocurrent generation on the semiconductor side by considering the transport of minority carriers within the semiconductor. [22] , photocurrent generation) on submicrometer size scales. [23] TiO2/BiVO4 photoelectrode were first tested for its photo absorption, photocurrent generation and electrical impedance to obtain the optimized sample. [24] In this work, we investigate the molecular factors determining the mechanism of photocurrent generation in low-donor-content organic solar cells, where the active layer is composed of vacuum-deposited C60 and small amounts of organic donor molecules. [25] In the second part, the photocurrent generation of dye-sensitized boron-doped diamond electrodes is compared and the influence of the employed chromophores, functionalization strategy, surface contamination and doping concentrations is analyzed. [26] This concept of photocurrent generation based on the real-space shift of the electron cloud on the short timescale of optical transition is distinct from that of conventional p–n junction photovoltaics, where the carriers are driven by the built-in Coulomb potential. [27] It is suggested that the availability of more oxygen-rich hole trapping states on the surface of the quantum dots play an important role in the photocurrent generation. [28] Multiphoton absorption may find many technological applications, such as enhancing the conversion efficiency of solar cells by the utilization of sub‐band‐energy photons, below‐bandgap photodetection through the simultaneous absorption of several infrared photons for photocurrent generation, or light frequency upconversion for high‐resolution, 3D imaging. [29] Under photo excitation, the covalently attached quinones can act as electron acceptors of bismuth oxyiodine (BiOI), promoting the photocurrent generation and thus allowing the elegant and "signal-on" mode for probing targets of interest. [30] In this paper, we are taking the first steps in this direction and explore the photocurrent generation of CNTs with specific chiralities in contact with a silicon-on-insulator (SOI) waveguide. [31] An erbium-doped silicon transistor prepared by ion implantation and co-doped with oxygen is investigated by photocurrent generation in the telecommunication range. [32] In semiconducting solar-cell absorbers, high absorption coefficient (alpha) near the band-edge region is critical to maximize the photocurrent generation and collection. [33] The photocurrent generation was investigated in detail by light beam induced current (LBIC) measurements of the front side and electron beam induced current (EBIC) measurements of cross sections of the CZTS/CdS/ZnO active junctions. [34] Various efforts have nonetheless demonstrated absorption and photocurrent generation with visible light while a typical solution for the slow water oxidation is electrode modification via oxygen evolution catalysts; Ni Fe (oxy) hydroxides in particular are among the highest turn-over efficiency and low-cost catalysts. [35] Concretely, the onset potential is negatively shifted with respect to that in the absence of ZnO QDs, facilitating the photocurrent generation at small external bias, as reflected in the applied bias photon-to-current efficiency (ABPE) that exhibits a two-fold enhancement. [36] This study presents a novel ZnO nanowire-based microfiber coupler structure for all-optical photodetection without the demand for photocurrent generation. [37] Formation of pn homojunction in a single semiconductor material through doping is key for photocurrent generation in inorganic solar cells (SCs). [38] show that avoiding excessive charge accumulation in the intra-bandgap tail states is vital to maintain the photocurrent generation at high thickness. [39] The results on optimization of loaded amount of WO3 of CMF from various precursor solutions indicated that both the WO3 particles loaded on the surface of CFs and those in the voids contribute to the photocurrent generation, while the efficiency of electron injection from WO3 on the CFs seems higher. [40] The PffBT4T-2OD introduces energy cascade and Forster resonance energy transfer (FRET) effect from P3HT to PffBT4T-2OD, which contributes to the photocurrent generation. [41] Broadband antireflection (AR) coatings are essential elements for improving the photocurrent generation of photovoltaic modules or the enhancement of visibility in optical devices. [42] TiO₂ nanorods exhibited excellent dispersion in both polymer matrixes, thus significantly improving the photocurrent generation and net efficiency. [43] Our results illustrate the importance of the structural proximity of LHCII and GE for photocurrent generation. [44]광전지의 광전류 생성은 기본적으로 Shockley-Queisser 한계에 의해 제한되는 광전 효율과 함께 pn 접합 또는 쇼트키 장벽의 인터페이스에 의존합니다. [1] 효율적이고 지속 가능한 에너지 생성 기술에 대한 요구 사항이 증가함에 따라 태양광 시스템에서 광전류 생성 메커니즘에 대한 이해가 필요합니다. [2] 계산에 사용된 모델은 확산 길이와 반도체 웨이퍼 두께 사이의 임의의 비율로 전하 캐리어를 중간 또는 높은 수준으로 주입하는 조건에서 광전류 생성 특성을 고려합니다. [3] 반응성(R)과 전력 지수(γ) 사이의 상관 관계는 국소 트랩 상태가 일반적으로 포토게이팅으로 알려진 광전류 생성에서 중요한 역할을 한다는 것을 나타냅니다. [4] 전자-정공 분리는 유기 태양 전지에서 광전류 생성을 위한 중요한 과정입니다. 여기에서 분자 광전지의 상호 작용과 에너지 변환 효율에 미치는 영향은 불순물 부위가 있는 여기자 상태 격자의 매력적인 Hubbard 모델을 통해 연구됩니다. 국부적인 전자-정공 상호작용에서 비롯된 상호 공간 분석을 억제합니다. [5] 또한 자체 전원 광검출기와 결합된 플라즈몬 효과는 광 흡수 및 산란을 더욱 향상시켜 장치의 광전류 생성 개선에 기여합니다. [6] 이 연구에서 우리는 cyanobacterium Synechocystis sp.의 광전류 생성에서 35배 향상을 달성했습니다. [7] 우리는 광 흡수, 광전류 생성 및 투과뿐만 아니라 장치의 색상 중립성에 대한 미러 층 두께의 영향을 분석합니다. [8] 이 장은 (i) 시험관 내에서 가치 있는 2차 대사산물 생산의 개선을 위한 나노입자의 사용, (ii) 비생물적 스트레스 완화를 위한 나노입자의 적용(가뭄, 염분 침수, 토양 산성도, UV 및 감마 -방사선, 열, 추위, 서리 및 독성 금속 스트레스) 식물에서, (iii) 광전류 생성을 위해 설계된 바이오하이브리드 시스템에서 광합성 장치 구성요소의 사용 및 (iv) 나노입자 및 나노바이오닉 접근법을 사용하여 생성된 기능이 강화된 식물. [9] 또한 이렇게 얻어진 MoS2-WS2 이종구조체의 광전류 발생과 광전환 현상을 연구하였다. [10] 이 작업은 광전류 생성에 대한 전자적 특성의 영향을 설명하기 위해 n-/p-형 Si 및 GaAs 반도체와 인터페이스되는 Au(i) 평면 다이오드 및 (ii) 임베디드 IR 나노안테나의 시뮬레이션 유도 제작에 대해 보고합니다. [11] 반사판의 층 두께를 변경하여 이 투과 스펙트럼을 조작할 수 있는 정도를 보여주고 후면 반사기의 반사 금속 층이 스펙트럼 선택성 태양 전지의 투과 및 광전류 생성에 어떻게 영향을 미치는지 보여줍니다. [12] 고효율 유기 태양 전지(OSC)를 달성하려면 전압 손실과 벌크 이종 접합(BHJ) 혼합물의 광전류 생성 간의 균형을 잘 맞춰야 합니다. [13] 광전류 생성을 위한 메커니즘이 제안되었습니다. 광전지에서. [14] 광전지의 광전류 생성은 기본적으로 Shockley-Queisser 한계에 의해 제한되는 광전 효율과 함께 pn 접합 또는 Schottey 장벽의 인터페이스에 의존합니다. [15] PYO의 낮은 중간 지점 잠재력은 광전류 생성과 크게 경쟁하는 O2 환원 부작용으로 이어졌습니다. 매개체 농도의 조정은 급성 세포독성을 피하면서 부반응을 능가하는 데 중요했습니다. [16] 소수 캐리어 이동도는 조명 시 전하 캐리어 수집에 직접적인 영향을 미치며, 이는 광전류 생성에 직접적인 영향을 미칩니다. [17] 또한, 그래핀/Bi2Te3 NW 접합부에서 광전류 생성 위치를 조사했습니다. [18] 이 다중 채널 방법은 광전도 및 광전류 생성과 같은 단일 분자 접합에서 거의 탐구되지 않은 다양한 특성을 분석하는 데 사용할 수 있으며 분광 수단으로 분자 접합을 특성화할 수도 있습니다. [19] 광전류 세대를 위해 더 많은 암흑 상태를 사용할 수 있을 것으로 예상됩니다. [20] 그러나 많은 연구는 광전류 생성 및 광 전달의 최적화에만 초점을 맞추고 장치의 색상 충실도를 무시했습니다. [21] 여기서 우리는 반도체 내 소수 캐리어의 수송을 고려하여 반도체 측의 광전류 생성을 포함하는 쇼트키 접합 기반 근거리 TPV 시스템에 대한 정확한 성능 분석 모델을 제안합니다. [22] , 광전류 생성) 서브마이크로미터 크기 스케일. [23] TiO2/BiVO4 광전극은 최적화된 샘플을 얻기 위해 먼저 광흡수, 광전류 생성 및 전기 임피던스를 테스트했습니다. [24] 이 연구에서 우리는 활성층이 진공 증착된 C60과 소량의 유기 공여체 분자로 구성된 저공여체 함량 유기 태양 전지에서 광전류 생성 메커니즘을 결정하는 분자 요인을 조사합니다. [25] 두 번째 부분에서는 염료감응 붕소 도핑 다이아몬드 전극의 광전류 생성을 비교하고 사용된 발색단, 기능화 전략, 표면 오염 및 도핑 농도의 영향을 분석합니다. [26] 짧은 시간 규모의 광전이에서 전자 구름의 실제 공간 이동에 기반한 광전류 생성 개념은 캐리어가 내장된 쿨롱 전위에 의해 구동되는 기존의 pn 접합 광전지의 개념과 다릅니다. [27] 양자점 표면에서 더 많은 산소가 풍부한 정공 트래핑 상태의 가용성이 광전류 생성에 중요한 역할을 한다고 제안됩니다. [28] 다중 광자 흡수는 부분대역 에너지 광자를 활용하여 태양 전지의 변환 효율을 향상시키거나, 광전류 생성을 위한 여러 적외선 광자를 동시에 흡수하여 밴드갭 아래 광검출하거나, 높은 주파수를 위한 광 주파수 상향 변환과 같은 많은 기술적 응용을 찾을 수 있습니다. ‐해상도, 3D 이미징. [29] 광 여기에서 공유 결합된 퀴논은 비스무트 옥시요오드(BiOI)의 전자 수용체로 작용하여 광전류 생성을 촉진하여 관심 대상을 조사하기 위한 우아하고 "신호 켜기" 모드를 허용합니다. [30] 이 논문에서 우리는 이 방향의 첫 번째 단계를 수행하고 SOI(silicon-on-insulator) 도파관과 접촉하는 특정 키랄리티를 갖는 CNT의 광전류 생성을 탐구합니다. [31] 이온 주입에 의해 준비되고 산소와 함께 도핑된 에르븀 도핑된 실리콘 트랜지스터는 통신 범위에서 광전류 생성에 의해 조사됩니다. [32] 반도체 태양전지 흡수체에서 밴드 에지 영역 근처의 높은 흡수 계수(알파)는 광전류 생성 및 수집을 최대화하는 데 중요합니다. [33] 광전류 생성은 전면의 광빔 유도 전류(LBIC) 측정과 CZTS/CdS/ZnO 활성 접합 단면의 전자빔 유도 전류(EBIC) 측정에 의해 자세히 조사되었습니다. [34] 그럼에도 불구하고 다양한 노력이 가시광선을 통한 흡수 및 광전류 생성을 입증했지만 느린 물 산화에 대한 일반적인 솔루션은 산소 발생 촉매를 통한 전극 수정입니다. 특히 Ni Fe(옥시) 수산화물은 가장 높은 전환 효율과 저렴한 촉매 중 하나입니다. [35] 구체적으로, 개시 전위는 ZnO QD가 없을 때와 관련하여 음으로 이동하여 2배 향상을 나타내는 적용된 바이어스 광자 대 전류 효율(ABPE)에 반영된 것처럼 작은 외부 바이어스에서 광전류 생성을 촉진합니다. . [36] 이 연구는 광전류 생성에 대한 요구 없이 전광학 광검출을 위한 새로운 ZnO 나노와이어 기반 극세사 커플러 구조를 제시합니다. [37] 도핑을 통해 단일 반도체 재료에 pn 동종접합을 형성하는 것은 무기 태양 전지(SC)에서 광전류 생성의 핵심입니다. [38] 밴드갭 내 꼬리 상태에서 과도한 전하 축적을 피하는 것이 높은 두께에서 광전류 생성을 유지하는 데 중요하다는 것을 보여줍니다. [39] 다양한 전구체 용액에서 CMF의 WO3 로딩량 최적화 결과 CF 표면에 로딩된 WO3 입자와 공극에 로딩된 WO3 입자 모두 광전류 생성에 기여하는 반면 WO3에서 CF에 전자 주입 효율은 더 높은. [40] PffBT4T-2OD는 P3HT에서 PffBT4T-2OD로 에너지 캐스케이드 및 FRET(Forster Resonance Energy Transfer) 효과를 도입하여 광전류 생성에 기여합니다. [41] 광대역 반사방지(AR) 코팅은 태양광 모듈의 광전류 생성을 개선하거나 광학 장치의 가시성을 향상시키는 데 필수적인 요소입니다. [42] TiO₂ 나노로드는 두 고분자 매트릭스 모두에서 우수한 분산을 나타내어 광전류 생성과 순 효율을 크게 향상시켰습니다. [43] 우리의 결과는 광전류 생성을 위한 LHCII와 GE의 구조적 근접성의 중요성을 보여줍니다. [44]
Enhanced Photocurrent Generation 향상된 광전류 생성
Inclusion of sputter-deposited Au NPs in the device geometry exploits the UV absorption in Au NPs through interband transition along with exciton generation in ZnO, resulting in enhanced photocurrent generation in the UV region (365 nm). [1] Here, we report an effective approach to combine solar-absorptive titanate-based oxide photocatalysts with titanium nitride (TiN) to demonstrate the enhanced photocurrent generation extending from the ultraviolet to the near-infrared region. [2] The prolonged photocarrier lifetime in graphene leads to dramatically enhanced photocurrent generation and photoresponsivity. [3] This work provides an insight to the development of a novel in situ composite with enhanced photocurrent generation and improved photocatalytic activity that can be utilized for environmental remediation applications. [4] In addition, due to the high carrier transfer rate of the obtained composite films, they possess enhanced photocurrent generation performance than pure BPNS-PEI and pure dye films. [5] In this work, plasmonic-enhanced photocurrent generation in organic photovoltaic (OPV) devices is demonstrated. [6] Interestingly, time-resolved microwave conductivity (TRMC) measurements show an enhanced photocurrent generation in. [7] The resultant s-Au/ZnO has well maintained the physical characteristics of the spinach leaf and demonstrated superior photocatalytic performance as well as enhanced photocurrent generation capability. [8]장치 형상에 스퍼터 증착 Au NP를 포함하면 ZnO의 여기자 생성과 함께 대역 간 전이를 통해 Au NP의 UV 흡수를 이용하여 UV 영역(365nm)에서 광전류 생성이 향상됩니다. [1] 여기에서 우리는 자외선에서 근적외선 영역으로 확장되는 향상된 광전류 생성을 입증하기 위해 태양광 흡수성 티타네이트 기반 산화물 광촉매와 질화 티타늄(TiN)을 결합하는 효과적인 접근 방식을 보고합니다. [2] 그래핀에서 연장된 광캐리어 수명은 광전류 생성 및 광응답성을 극적으로 향상시킵니다. [3] 이 연구는 개선된 광전류 생성 및 개선된 광촉매 활성을 가진 새로운 현장 복합재 개발에 대한 통찰력을 제공하여 환경 개선 응용 프로그램에 활용할 수 있습니다. [4] nan [5] 이 연구에서는 유기 광전지(OPV) 장치에서 플라즈몬 강화 광전류 생성을 시연합니다. [6] 흥미롭게도 시간 분해 마이크로파 전도도(TRMC) 측정은 향상된 광전류 생성을 보여줍니다. [7] nan [8]
High Photocurrent Generation 높은 광전류 생성
Impedance spectroscopy illustrated the lowest charge transfer resistance (Rct) of 5%-Mo-CN nanotubes, which further confirms the fast electron transfer kinetics and efficient charge separation resulting in high photocurrent generation. [1] A kinetic model is used to rationalize the results, showing that although photogenerated charges have to overcome a significant Coulomb potential to generate free carriers, OPV blends can achieve high photocurrent generation yields given that the thermal dissociation rate of charges outcompetes the recombination rate. [2] It is noted that a high incident photon-to-electron conversion efficiency (IPCE) of 92% is achieved at the wavelength of 587 nm due to the constructive interference effect in the multilayer structure, which can be used to explain the high photocurrent generation in a semi-transparent solar cell. [3] Predominantly, the Co and Ni-modified GO samples showed a high photocurrent generation of 64. [4] Current non-fullerene organic photovoltaics (OPVs) can achieve high photocurrent generation yields with small donor/acceptor energy offsets. [5] Poly(L)n films were found to show surface-controlled TPA•+1/0 associated quasi-reversible redox and exceptionally high photocurrent generation properties. [6]임피던스 분광법은 5%-Mo-CN 나노튜브의 가장 낮은 전하 이동 저항(Rct)을 보여주었으며, 이는 더 빠른 전자 이동 역학과 효율적인 전하 분리를 확인하여 높은 광전류 생성을 초래합니다. [1] 운동 모델은 결과를 합리화하는 데 사용되며, 광생성 전하가 자유 캐리어를 생성하기 위해 상당한 쿨롱 전위를 극복해야 하지만 전하의 열 해리 속도가 재결합 속도를 능가한다는 점을 감안할 때 OPV 혼합물이 높은 광전류 생성 수율을 달성할 수 있음을 보여줍니다. [2] 다층 구조의 보강 간섭 효과로 인해 587nm 파장에서 92%의 높은 입사 광자-전자 변환 효율(IPCE)이 달성된다는 점에 주목해야 합니다. 반투명한 태양전지. [3] nan [4] 현재의 비풀러렌 유기 광전지(OPV)는 작은 공여체/수용체 에너지 오프셋으로 높은 광전류 생성 수율을 달성할 수 있습니다. [5] 폴리(L)n 필름은 표면 제어된 TPA•+1/0 관련 준 가역 산화환원 및 예외적으로 높은 광전류 생성 특성을 나타내는 것으로 밝혀졌습니다. [6]
Improved Photocurrent Generation 향상된 광전류 생성
Transfer and output characteristics of the MoS2 TFTs clearly show improved photocurrent generation under a wide range of illuminations (740~365 nm). [1] Both the composites had shown quenched photoemission but exhibited a much improved photocurrent generation than the pristine components. [2] Our findings explain the mechanism responsible for the improved photocurrent generation in the OPV blends with fluorinated NFAs, suggesting that manipulating the energy landscape of triplet excited states is a promising strategy for further optimizing OPV devices. [3] The improved photocurrent generation of the C60-ND composite may result from the photoinduced charge separation at the interface between C60 and ND. [4] Compared to β1, the β2 polymorph exhibits a lower optical band gap, an enhanced photoluminescence, a reduced π-stacking distance, a higher hole mobility in field-effect transistors and improved photocurrent generation in polymer solar cells. [5]MoS2 TFT의 전달 및 출력 특성은 광범위한 조명(740~365 nm)에서 향상된 광전류 생성을 명확하게 보여줍니다. [1] 두 합성물은 소멸된 광방출을 나타내었지만 원래 구성요소보다 훨씬 개선된 광전류 생성을 나타냈습니다. [2] nan [3] C60-ND 합성물의 향상된 광전류 생성은 C60과 ND 사이의 계면에서 광유도 전하 분리의 결과일 수 있습니다. [4] β1과 비교하여 β2 다형체는 더 낮은 광학 밴드 갭, 향상된 광발광, 감소된 π-적재 거리, 전계 효과 트랜지스터에서 더 높은 정공 이동도 및 폴리머 태양 전지에서 개선된 광전류 생성을 나타냅니다. [5]
Efficient Photocurrent Generation
The asymmetry of electron–hole diffusion velocities in intrinsic graphene can give rise to efficient photocurrent generation. [1] The photoluminescence (PL) measurements show that both donor and acceptor can quench each other’s PL effectively, implying that not only electrons are transferred from PTB7-Th → SMNFAs but also holes are transferred from SMNFAs → PTB7-Th for efficient photocurrent generation. [2] Perylene diimide (PDI)-based small molecular acceptors with a three-dimensional structure are thought to be essential for efficient photocurrent generation and high power conversion efficiencies (PCEs). [3] The proposed TET process is generic in allowing manipulation of spin-dependent recombination pathways in favor of efficient photocurrent generation in low optical gap organic diodes. [4] They lead to efficient photocurrent generation. [5]고유 그래핀에서 전자-정공 확산 속도의 비대칭은 효율적인 광전류 생성을 일으킬 수 있습니다. [1] 광발광(PL) 측정은 도너와 억셉터 모두 서로의 PL을 효과적으로 소멸시킬 수 있음을 보여줍니다. 이는 전자가 PTB7-Th → SMNFA에서 전달될 뿐만 아니라 정공도 SMNFA → PTB7-Th에서 전달되어 효율적인 광전류 생성을 한다는 것을 의미합니다. [2] 3차원 구조의 페릴렌 디이미드(PDI) 기반 저분자 수용체는 효율적인 광전류 생성 및 높은 전력 변환 효율(PCE)에 필수적인 것으로 생각됩니다. [3] 제안된 TET 공정은 낮은 광학 갭 유기 다이오드에서 효율적인 광전류 생성을 위해 스핀 의존적 재조합 경로를 조작할 수 있다는 점에서 일반적입니다. [4] nan [5]
Cathodic Photocurrent Generation
The QM/MM modeling implies that a perpendicular or parallel orientation of the heme group with respect to the SLG surface is detrimental to DET, whereas the tilted orientation favors the cathodic photocurrent generation. [1] Ag/AgCl) and a positive onset potential of the cathodic photocurrent generation (Uonset = + 0. [2] It was found that the films exhibited surface-controlled RuIII/II based redox behavior and cathodic photocurrent generation characteristics. [3]QM/MM 모델링은 SLG 표면에 대한 헴 그룹의 수직 또는 평행 방향이 DET에 해로운 반면 기울어진 방향은 음극 광전류 생성을 선호함을 의미합니다. [1] Ag/AgCl) 및 음극 광전류 생성의 양의 시작 전위(Uonset = + 0. [2] 필름은 표면 제어된 RuIII/II 기반 산화환원 거동 및 음극 광전류 생성 특성을 나타내는 것으로 밝혀졌습니다. [3]
Underlying Photocurrent Generation
This is illustrated by unraveling the polarization dependence, directionality, and intrinsic timescales underlying photocurrent generation and decay. [1] This is illustrated by unraveling the polarization dependence, directionality, and intrinsic timescales underlying photocurrent generation and decay. [2]이것은 광전류 생성 및 붕괴의 기본이 되는 편광 의존성, 방향성 및 고유 시간 척도를 푸는 것으로 설명됩니다. [1] 이것은 광전류 생성 및 붕괴의 기본이 되는 편광 의존성, 방향성 및 고유 시간 척도를 푸는 것으로 설명됩니다. [2]
Increased Photocurrent Generation
Compared with pure ZnIn2S4, Zn-defective ZnIn2S4-Laponite hybrids have increased photocurrent generation and photocatalytic performance. [1] The as-obtained CsPbBr3/MXene nanocomposites demonstrated increased photocurrent generation in response to visible light and X-ray illumination, attesting to the potential application of these heterostructure nanocomposites for photoelectric detection. [2]순수한 ZnIn2S4와 비교하여 Zn 결함이 있는 ZnIn2S4-Laponite 하이브리드는 광전류 생성 및 광촉매 성능이 증가했습니다. [1] 얻은 CsPbBr3/MXene 나노복합체는 가시광선과 X선 조명에 반응하여 증가된 광전류 생성을 보여주었으며, 이는 광전 검출을 위한 이러한 헤테로구조 나노복합체의 잠재적인 응용을 증명합니다. [2]
Increase Photocurrent Generation
The moth-eye structures mitigate Fresnel reflections and increase photocurrent generation over all measured angles of incidence relative to ELO solar cell arrays with traditional untextured polymer packaging. [1] Extending light absorption beyond 800 nm into the NIR should increase photocurrent generation and further improve photovoltaic efficiency of perovskite solar cells (PSCs). [2]나방 눈 구조는 프레넬 반사를 완화하고 기존의 질감이 없는 폴리머 패키징을 사용하는 ELO 태양 전지 어레이와 관련하여 측정된 모든 입사각에서 광전류 생성을 증가시킵니다. [1] 800nm 이상의 광 흡수를 NIR로 확장하면 광전류 생성이 증가하고 페로브스카이트 태양 전지(PSC)의 광전지 효율이 더욱 향상됩니다. [2]
photocurrent generation mechanism 광전류 생성 메커니즘
We demonstrate with ab initio calculations that the photocurrent generation mechanism is universal and arises in gaped materials (Si, diamond, MgO, hBN), in semimetals (graphene), and in two- and three-dimensional systems. [1] Additionally, possible photocurrent generation mechanisms are also discussed that the ionic photocurrent is attributed to modulated light to SPV and electrochemical reaction. [2] These fundamental studies not only offer insight for the photocurrent generation mechanisms of group IVB TMDC materials, but also provide a route to engineering future temperature-dependent, two-dimensional, fast electronic and optoelectronic devices. [3] We demonstrate with ab-initio calculations that the photocurrent generation mechanism is universal and arises in gaped materials (Si, diamond, MgO, hBN), in semi-metals (graphene), and in two- and three-dimensional systems. [4] Our finding invokes reconsideration of the photocurrent generation mechanism in $\ensuremath{\alpha}\text{\ensuremath{-}}{\mathrm{Fe}}_{2}{\mathrm{O}}_{3}$ photoanodes. [5] To investigate photocurrent generation mechanisms in these organic solar cells (OSCs), we design and synthesize four thienothiophene (TT)-based small-molecule donors with the highest occupied molecular orbital (HOMO) levels varying from −6. [6] GaN-based p–i–n ultraviolet photodetectors (UV-PDs) with a 20 nm thick Al2O3 passivation layer are fabricated and the photocurrent generation mechanisms of the device at different biases are studied by performing different electro-optical measurements. [7] The rationale of the photodetectors containing photocurrent generation mechanisms and performance parameters are briefly introduced. [8] Various photocurrent generation mechanisms are seen to be prevalent, namely, due to the inherent van hove singularities in the band structure, band edge excitation of MoSalt;subagt;2alt;/subagt;, trap assisted and IR generated photocurrent. [9] The photoresponse of graphene junctions is characterized by two competing photocurrent generation mechanisms: a built-in field driven photovoltaic effect and a more dominant hot- carrier-assisted photothermoelectric (PTE) effect. [10] It has been observed that the photocurrent generation mechanism in both photodetector devices is dominantly driven by a photogating effect. [11]우리는 초기 계산을 통해 광전류 생성 메커니즘이 보편적이며 틈이 있는 물질(Si, 다이아몬드, MgO, hBN), 반금속(그래핀), 2차원 및 3차원 시스템에서 발생함을 보여줍니다. [1] 또한, 가능한 광전류 생성 메커니즘은 이온 광전류가 SPV 및 전기화학 반응에 대한 변조된 빛에 기인한다고 논의됩니다. [2] 이러한 기본 연구는 그룹 IVB TMDC 재료의 광전류 생성 메커니즘에 대한 통찰력을 제공할 뿐만 아니라 미래의 온도 의존성, 2차원, 고속 전자 및 광전자 장치를 엔지니어링하는 경로를 제공합니다. [3] 우리는 초기 계산을 통해 광전류 생성 메커니즘이 보편적이며 틈이 있는 물질(Si, 다이아몬드, MgO, hBN), 반금속(그래핀), 2차원 및 3차원 시스템에서 발생한다는 것을 보여줍니다. [4] 우리의 발견은 $\ensuremath{\alpha}\text{\ensuremath{-}}{\mathrm{Fe}}_{2}{\mathrm{O}}_{3}$ photoanode에서 광전류 생성 메커니즘의 재고를 불러옵니다. . [5] 이러한 유기 태양 전지(OSC)에서 광전류 생성 메커니즘을 조사하기 위해 -6에서 다양한 HOMO(최고 점유 분자 궤도) 수준을 갖는 4개의 TT(티에노티오펜) 기반 소분자 공여체를 설계하고 합성합니다. [6] nan [7] 광전류 생성 메커니즘과 성능 매개변수를 포함하는 광검출기의 이론적 근거를 간략하게 소개합니다. [8] 밴드 구조의 고유한 van hove 특이성, MoSalt;subagt;2alt;/subagt;의 밴드 가장자리 여기, 트랩 보조 및 IR 생성 광전류로 인해 다양한 광전류 생성 메커니즘이 널리 퍼져 있는 것으로 보입니다. [9] nan [10] nan [11]
photocurrent generation property 광전류 생성 속성
The DNA and Au NPs were optimized to manipulate the photocurrent generation properties, which may facilitate the related investigations in biomedicine and biomaterials. [1] Furthermore, the ratio of AuNPs and charge stoichiometry of DNA:DDAB also affected photocurrent generation property of these DNA melts. [2] The results revealed that even the monolayer metallopolymeric thin films presented surface-controlled RuIII/II and TPA+1/0 associated redox behaviours and exceptionally strong photocurrent generation properties. [3] Poly(L)n films were found to show surface-controlled TPA•+1/0 associated quasi-reversible redox and exceptionally high photocurrent generation properties. [4]DNA 및 Au NP는 광전류 생성 특성을 조작하도록 최적화되어 생물 의학 및 생체 재료의 관련 조사를 용이하게 할 수 있습니다. [1] 또한, AuNPs의 비율과 DNA:DDAB의 전하 화학량론도 이들 DNA 용융물의 광전류 생성 특성에 영향을 미쳤습니다. [2] 결과는 단층 금속고분자 박막조차도 표면 제어된 RuIII/II 및 TPA+1/0과 관련된 산화환원 거동 및 예외적으로 강한 광전류 생성 특성을 나타내는 것으로 나타났습니다. [3] 폴리(L)n 필름은 표면 제어된 TPA•+1/0 관련 준 가역 산화환원 및 예외적으로 높은 광전류 생성 특성을 나타내는 것으로 밝혀졌습니다. [4]
photocurrent generation pathway
Our results give new insight into the photocurrent generation pathways in CNTs, and the field dependence and diameter dependence of PCQY. [1] Here we demonstrate highly efficient PSCs with efficient dual photocurrent generation pathways from a blend of a polymer donor and two narrow-bandgap nonfullerene acceptors, with an outstanding certified PCE of 13. [2]우리의 결과는 CNT의 광전류 생성 경로와 PCQY의 필드 의존성 및 직경 의존성에 대한 새로운 통찰력을 제공합니다. [1] 여기에서 우리는 13의 뛰어난 인증 PCE와 함께 폴리머 기증자와 두 개의 좁은 밴드갭 논풀러렌 수용체의 혼합에서 효율적인 이중 광전류 생성 경로를 가진 고효율 PSC를 보여줍니다. [2]
photocurrent generation ability
In addition, the photodetectors based on the novel 1D single crystal present good stability; after 3 months of ambient storage, 85% of its original photocurrent generation ability is retained. [1] According to the results of the investigations on the external quantum efficiency and responsivity, the inherent photocurrent generation ability of ZnO was not deteriorated through low concentration lithium doping. [2]nan [1] 외부 양자 효율 및 반응성에 대한 조사 결과, 저농도 리튬 도핑을 통해 ZnO 고유의 광전류 생성 능력이 저하되지 않는 것으로 나타났다. [2]
photocurrent generation compared
The ZnO/CQDs/r-GO composites showed excellent potential for photocurrent generation compared with ZnO, ZnO/CQDs and ZnO/r-GO under-stimulated sunlight. [1] The PEC cells encompass with TiO2 nanowire photoelectrode, and CZTS-250 °C counter electrode showed feasible photocurrent generation compared to conventional Pt counter electrode. [2]photocurrent generation yield 광전류 발전 수율
A kinetic model is used to rationalize the results, showing that although photogenerated charges have to overcome a significant Coulomb potential to generate free carriers, OPV blends can achieve high photocurrent generation yields given that the thermal dissociation rate of charges outcompetes the recombination rate. [1] Current non-fullerene organic photovoltaics (OPVs) can achieve high photocurrent generation yields with small donor/acceptor energy offsets. [2]운동 모델은 결과를 합리화하는 데 사용되며, 광생성 전하가 자유 캐리어를 생성하기 위해 상당한 쿨롱 전위를 극복해야 하지만 전하의 열 해리 속도가 재결합 속도를 능가한다는 점을 감안할 때 OPV 혼합물이 높은 광전류 생성 수율을 달성할 수 있음을 보여줍니다. [1] 현재의 비풀러렌 유기 광전지(OPV)는 작은 공여체/수용체 에너지 오프셋으로 높은 광전류 생성 수율을 달성할 수 있습니다. [2]