Photocurrent Density
광전류 밀도

Sentence Examples

Discover more insights into Photocurrent Density 광전류 밀도

Keywords frequently search together with Photocurrent Density 광전류 밀도

Narrow sentence examples with built-in keyword filters

Photocurrent Density sentence examples within open circuit voltage

open circuit voltage
개방 회로 전압

Furthermore, the short-circuit photocurrent density (JSC), open-circuit voltage (VOC), fill factor (FF), and the corresponding photon-to-current conversion efficiency (η) estimated from the J-V characteristic curves with an effective area of 1 cm2 calculated for pereskia bleo DSSC are JSC = 0.

또한, 단락 광전류 밀도(JSC), 개방 회로 전압(VOC), 필 팩터(FF) 및 유효 면적이 pereskia bleo DSSC에 대해 계산된 1cm2는 JSC = 0입니다.

Understanding the optical behaviours and the power conversion efficiency of novel organic dye and nanostructured TiO2 based integrated DSSCs

open circuit voltage
개방 회로 전압

Incorporation of optimum amount of g-C3N4 in the composite material could enhance the short circuit photocurrent density (JSC) as well as open circuit voltage (VOC).

복합 재료에 최적의 양의 g-C3N4를 포함하면 단락 광전류 밀도(JSC)와 개방 회로 전압(VOC)을 향상시킬 수 있습니다.

Graphitic carbon nitride (g-C3N4) incorporated TiO2–B nanowires as efficient photoanode material in dye sensitized solar cells

More open circuit voltage sentences
개방 회로 전압 More Sentences

Photocurrent Density sentence examples within reversible hydrogen electrode

reversible hydrogen electrode
가역 수소 전극

The SnS photocathode reveals the highest photocurrent density of 28 mA cm-2 at 0 V versus the reversible hydrogen electrode.

SnS 광음극은 가역 수소 전극에 비해 0V에서 28mA cm-2의 가장 높은 광전류 밀도를 나타냅니다.

Crystal Facet-Controlled Efficient SnS Photocathodes for High Performance Bias-Free Solar Water Splitting.

reversible hydrogen electrode
가역 수소 전극

The n+p-Si/Ti/Ru-MoS2 delivers the largest reported photocurrent density for the Si-based photocathode (−43 mA cm−2 at 0 V versus a reversible hydrogen electrode (VRHE)).

n+p-Si/Ti/Ru-MoS2는 Si 기반 광음극에 대해 보고된 가장 큰 광전류 밀도를 제공합니다(가역성 수소 전극(VRHE)에 비해 0V에서 -43mA cm-2).

Coupling Ru-MoS2 heterostructure with silicon for efficient photoelectrocatalytic water splitting

More reversible hydrogen electrode sentences
가역 수소 전극 More Sentences

Photocurrent Density sentence examples within power conversion efficiency

power conversion efficiency
전력 변환 효율

Notably, we emphasize the interface, additive, and gradient band alignment engineering and resulting improvement in the photocurrent density, photovoltage, power conversion efficiency, and long-term stability.

특히 인터페이스, 가법 및 기울기 대역 정렬 엔지니어링을 강조하여 광전류 밀도, 광전압, 전력 변환 효율 및 장기 안정성을 향상시킵니다.

A comprehensive review on defect passivation and gradient energy alignment strategies for highly efficient perovskite solar cells

power conversion efficiency
전력 변환 효율

Consequently, an H-shaped dye containing diphenylaminofluorene donor displayed highest power conversion efficiency in the series due to high photocurrent density and open circuit voltage.

결과적으로, 디페닐아미노플루오렌 공여체를 함유하는 H형 염료는 높은 광전류 밀도와 개방 회로 전압으로 인해 시리즈에서 가장 높은 전력 변환 효율을 나타냈다.

Dithienopyrrole-based dianchoring dyes: Effect of molecular design and donors on the optical and photovoltaic properties

More power conversion efficiency sentences
전력 변환 효율 More Sentences

Photocurrent Density sentence examples within linear sweep voltammetry

linear sweep voltammetry
선형 스위프 전압전류법

PEC activity of γ-In2Se3 photoanodes was evaluated using linear sweep voltammetry (LSV), and there was an increase in photocurrent density with deposition time.

γ-In2Se3 광양극의 PEC 활성은 LSV(Linear Sweep voltammetry)를 사용하여 평가되었으며 증착 시간에 따라 광전류 밀도가 증가했습니다.

Preparation and characterization of γ-In2Se3 thin-film photoanodes for photoelectrochemical water splitting

linear sweep voltammetry
선형 스위프 전압전류법

PEC activity of ZNS@ZIF8 photoanodes was evaluated using the linear sweep voltammetry (LSV) technique, and the photocurrent density is significantly enhanced when ZNS are decorated with ZIF8 nanocrystals.

ZNS@ZIF8 광양극의 PEC 활성은 LSV(Linear Sweep voltammetry) 기술을 사용하여 평가되었으며 ZNS가 ZIF8 나노결정으로 장식될 때 광전류 밀도가 크게 향상되었습니다.

2D alignment of zinc oxide@ZIF8 nanocrystals for photoelectrochemical water splitting

More linear sweep voltammetry sentences
선형 스위프 전압전류법 More Sentences

Photocurrent Density sentence examples within 2 times higher

2 times higher
2배 이상

The photocurrent density of the brookite/BiOBr (30%) was about 2 times higher than that of pure brookite.

brookite/BiOBr(30%)의 광전류 밀도는 순수한 brookite의 광전류 밀도보다 약 2배 높았다.

Synthesis and visible-light photocatalytic activity of brookite/BiOBr

2 times higher
2배 이상

2 times higher photocurrent density than that of pristine BiVO4 (040) at 1.

1에서 깨끗한 BiVO4(040)보다 2배 더 높은 광전류 밀도.

Single-Atomic-Co Cocatalyst on (040) Facet of BiVO4 toward Efficient Photoelectrochemical Water Splitting

More 2 times higher sentences
2배 이상 More Sentences

Photocurrent Density sentence examples within visible light irradiation

visible light irradiation
가시광선 조사

Under visible light irradiation, the photocurrent density of the In2O3/In2S3-5 photoanode reached 0.

가시광선 조사에서 In2O3/In2S3-5 광양극의 광전류 밀도는 0에 도달했습니다.

Fabrication of In2O3/In2S3 heterostructures for enhanced photoelectrochemical performance

visible light irradiation
가시광선 조사

The results indicated that at the optimal plasma discharge time of 5 min for modification of g-C3N4 and Ag2O, photocurrent density of ternary composite was 6 times to bare TiO2-NRs under UV-visible light irradiation.

결과는 g-C3N4 및 Ag2O의 개질을 위한 최적의 플라즈마 방전 시간 5분에서 삼원 복합체의 광전류 밀도가 UV-가시광 조사 하에서 노출된 TiO2-NR의 6배임을 나타내었다.

Dielectric barrier discharge plasma-assisted modification of g-C3N4/Ag2O/TiO2-NRs composite enhanced photoelectrocatalytic activity.

More visible light irradiation sentences
가시광선 조사 More Sentences

Photocurrent Density sentence examples within charge separation efficiency

charge separation efficiency
전하 분리 효율

BiVO4/SnO2 photoanode exhibits not only remarkable charge separation efficiency of 97% but also, by loading NiFe as a co-catalyst for water oxidation, high photocurrent density of 5.

BiVO4/SnO2 광양극은 97%의 놀라운 전하 분리 효율을 나타낼 뿐만 아니라 NiFe를 물 산화의 조촉매로 담지하여 5의 높은 광전류 밀도를 나타냅니다.

Near-complete charge separation in tailored BiVO4-based heterostructure photoanodes toward artificial leaf

charge separation efficiency
전하 분리 효율

By using engineered QDs with a gradient interface, the photoanode reached a photocurrent density (Jph) and charge-separation efficiency (ηseparation) of 15.

그래디언트 인터페이스가 있는 엔지니어링된 QD를 사용하여 광양극은 15의 광전류 밀도(Jph) 및 전하 분리 효율(ηseparation)에 도달했습니다.

Ferroelectric polarization-enhanced charge separation in quantum dots sensitized semiconductor hybrid for photoelectrochemical hydrogen production

More charge separation efficiency sentences
전하 분리 효율 More Sentences

Photocurrent Density sentence examples within 1 sun illumination

1 sun illumination
1 태양 조명

Under 1 sun illumination, the optimized 2CoPc(NH2)4/BiVO4 photoelectrode exhibits the largest photocurrent density of 3.

1 태양 조명에서 최적화된 2CoPc(NH2)4/BiVO4 광전극은 3의 가장 큰 광전류 밀도를 나타냅니다.

Efficient photoelectrochemical water oxidation of cobalt phthalocyanine decorated BiVO4 photoanode by improving kinetics

1 sun illumination
1 태양 조명

In particular Cd2+ ion temperature (140 °C/18 h), the optimized ZnCdSe/ZnO-(F) photoelectrode shows an excellent photocurrent density of 14 mA·cm-2 at 0 V vs Ag/AgCl with 219 μmol·cm-2 hydrogen gas evolution for 3 h under 1 sun illumination.

특히 Cd2+ 이온 온도(140°C/18h)에서 최적화된 ZnCdSe/ZnO-(F) 광전극은 0V에서 14mA·cm-2의 우수한 광전류 밀도를 보여줍니다. 대 Ag/AgCl은 219μmol·cm-2 1개의 태양 조명 아래에서 3시간 동안 수소 가스 발생.

Topotactic and Self-Templated Fabrication of Zn1-xCdxSe Porous Nanobelt-ZnO Nanorod for Photoelectrochemical Hydrogen Production.

More 1 sun illumination sentences
1 태양 조명 More Sentences

Photocurrent Density sentence examples within improved light absorption

improved light absorption
향상된 빛 흡수

The as-obtained B-TiO2/Al2O3/NiOOH ternary heterojunction with a high-quality contact interface exhibits improved light absorption ability, an enhanced photocurrent density of 1.

고품질 접촉 계면을 가진 얻은 B-TiO2/Al2O3/NiOOH 삼원 이종 접합은 향상된 광 흡수 능력, 1의 향상된 광전류 밀도를 나타냅니다.

A Three-Dimensional Branched TiO2 Photoanode with an Ultrathin Al2O3 Passivation Layer and a NiOOH Cocatalyst toward Photoelectrochemical Water Oxidation.

improved light absorption
향상된 빛 흡수

The superior degradation performance of the OCN samples were observed due to the improved light absorption, less recombination rate of photogenerated electron and hole, and enhanced electron transportation, which was proven through the PL, photocurrent density, and EIS results.

PL, 광전류밀도, EIS 결과를 통해 입증된 광흡수 개선, 광발생 전자와 정공의 재결합율 감소, 전자 수송 강화로 OCN 시료의 열화 성능이 우수함을 확인할 수 있었다.

Single-step synthesis of oxygen-doped hollow porous graphitic carbon nitride for photocatalytic ciprofloxacin decomposition

More improved light absorption sentences
향상된 빛 흡수 More Sentences

Photocurrent Density sentence examples within Circuit Photocurrent Density

Circuit Photocurrent Density
회로 광전류 밀도

As Sr content increases, both the short circuit photocurrent density and the open circuit photovoltage begins to increase and then decrease, the maximum values achieved when 15 at.

Sr 함량이 증가함에 따라 단락 광전류 밀도와 개방 회로 광전압이 모두 증가하기 시작하고 감소하기 시작하여 15at일 때 최대값을 달성합니다.

Photovoltaic effect in Sr-doped BiFeO3 thin films

Circuit Photocurrent Density
회로 광전류 밀도

We evaluated and assessed the important relevant parameters that influence the performance of photovoltaic cell to measure their involvement in the short-circuit photocurrent density (Jsc).

우리는 단락 광전류 밀도(Jsc)에 대한 관련성을 측정하기 위해 태양광 전지의 성능에 영향을 미치는 중요한 관련 매개변수를 평가하고 평가했습니다.

Computational study of the effect of π-spacers on the optoelectronic properties of carbazole-based organic dyes

More Circuit Photocurrent Density sentences
회로 광전류 밀도 More Sentences

Photocurrent Density sentence examples within High Photocurrent Density

High Photocurrent Density
높은 광전류 밀도

The resultant β-FeOOH-B-BiVO4 photoanode shows an extremely high photocurrent density of 4.

생성된 β-FeOOH-B-BiVO4 광양극은 4의 매우 높은 광전류 밀도를 나타냅니다.

Borate and iron hydroxide co-modified BiVO4 photoanodes for high-performance photoelectrochemical water oxidation

High Photocurrent Density
높은 광전류 밀도

This review also discusses combinations of several methods that enable high photocurrent density with fabulous stability.

이 검토에서는 또한 높은 광전류 밀도와 놀라운 안정성을 가능하게 하는 여러 방법의 조합에 대해 설명합니다.

Improvement of TiO2 nanotubes for photoelectrochemical water splitting: Review

More High Photocurrent Density sentences
높은 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Highest Photocurrent Density

Highest Photocurrent Density
최고 광전류 밀도

The preferable type II homojunction electrode composed of Zn-doped BiVO4 bottom layer and W-doped BiVO4 top layer (W:BVO/Zn:BVO) shows the highest photocurrent density of 2.

Zn이 도핑된 BiVO4 하부층과 W가 도핑된 BiVO4 상부층(W:BVO/Zn:BVO)으로 구성된 바람직한 유형 II 호모접합 전극은 2의 가장 높은 광전류 밀도를 나타냅니다.

Efficient bismuth vanadate homojunction with zinc and tungsten doping via simple successive spin-coating process for photoelectrochemical catalyzing water oxidation

Highest Photocurrent Density
최고 광전류 밀도

The highest photocurrent density of ~ 353 μA/cm2 has been observed for ZnFe2O4 photoanode prepared at 2.

~ 353μA/cm2의 가장 높은 광전류 밀도는 2에서 준비된 ZnFe2O4 광양극에서 관찰되었습니다.

Solution-processed electrochemical synthesis of ZnFe2O4 photoanode for photoelectrochemical water splitting

More Highest Photocurrent Density sentences
최고 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Higher Photocurrent Density

Higher Photocurrent Density
더 높은 광전류 밀도

Zn-Cu2O/S has good visible light sensing performance, rapid carrier transport, higher photocurrent density and 100% removal rate of methyl orange.

Zn-Cu2O/S는 가시광선 감지 성능이 우수하고 캐리어 이동이 빠르고 광전류 밀도가 높으며 메틸 오렌지 제거율이 100%입니다.

Zn/S-modified Cu2O nanoparticles for applications in photocatalysis

Higher Photocurrent Density
더 높은 광전류 밀도

The higher photocurrent density and photoconversion efficiency are up to 4.

더 높은 광전류 밀도와 광변환 효율은 최대 4입니다.

The co-decorated TiO2 nanorod array photoanodes by CdS/CdSe to promote photoelectrochemical water splitting

More Higher Photocurrent Density sentences
더 높은 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Maximum Photocurrent Density

Maximum Photocurrent Density
최대 광전류 밀도

A maximum photocurrent density of 1.

1의 최대 광전류 밀도.

SnO2 QDs-decorated V2O5 nanobelts for photoelectrochemical water splitting under visible light

Maximum Photocurrent Density
최대 광전류 밀도

After depositing NiFe-CE on BiVO4 nanostructures and measuring their maximum photocurrent density of 4.

BiVO4 나노구조체에 NiFe-CE를 증착하고 최대 광전류 밀도를 4로 측정한 후.

Exposure of NiFe-LDH active sites by cation–exchange to promote photoelectrochemical water splitting performance

More Maximum Photocurrent Density sentences
최대 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Enhanced Photocurrent Density

Enhanced Photocurrent Density
향상된 광전류 밀도

Here we report the bulk photovoltaic effect in two-dimensional ferroelectric CuInP2S6 with enhanced photocurrent density by two orders of magnitude higher than conventional bulk ferroelectric perovskite oxides.

여기에서 우리는 기존의 벌크 강유전성 페로브스카이트 산화물보다 2배 더 높은 광전류 밀도를 가진 2차원 강유전성 CuInP2S6의 벌크 광기전 효과를 보고합니다.

Enhanced bulk photovoltaic effect in two-dimensional ferroelectric CuInP2S6

Enhanced Photocurrent Density
향상된 광전류 밀도

The doped MgFe2O4 nanostructures show significant photocatalytic activity and enhanced photocurrent density than that of pristine MgFe2O4.

도핑된 MgFe2O4 나노구조는 순수한 MgFe2O4보다 상당한 광촉매 활성과 향상된 광전류 밀도를 보여줍니다.

Elevating the charge separation of MgFe2O4 nanostructures by Zn ions for enhanced photocatalytic and photoelectrochemical water splitting.

More Enhanced Photocurrent Density sentences
향상된 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Stable Photocurrent Density

Stable Photocurrent Density
안정적인 광전류 밀도

For the Ag3Cu/TiO2/ZnTe MIS photocathode, an extraordinary and highly stable photocurrent density of −5.

Ag3Cu/TiO2/ZnTe MIS 광음극의 경우 -5의 매우 안정적이고 매우 안정적인 광전류 밀도입니다.

A colloidal ZnTe quantum dot-based photocathode with a metal–insulator–semiconductor structure towards solar-driven CO2 reduction to tunable syngas

Stable Photocurrent Density
안정적인 광전류 밀도

The optimum loading of ZnCo2O4 over BiVO4 yields unprecedented stable photocurrent density with an apparent cathodic shift of 0.

BiVO4에 대한 ZnCo2O4의 최적 부하는 0의 명백한 음극 이동으로 전례 없는 안정적인 광전류 밀도를 생성합니다.

Deposition of zinc cobaltite nanoparticles onto bismuth vanadate for enhanced photoelectrochemical water splitting.

More Stable Photocurrent Density sentences
안정적인 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Improved Photocurrent Density

Improved Photocurrent Density
향상된 광전류 밀도

The CZO electrolyte shows improved photocurrent density of 0.

CZO 전해질은 0의 향상된 광전류 밀도를 나타냅니다.

Effect of a novel one-dimensional zinc tungsten oxide nanorods anchored two-dimensional graphitic carbon nitride nanosheets for improved solar-light-driven photocatalytic removal of toxic pollutants and photoelectrochemical water splitting

Improved Photocurrent Density
향상된 광전류 밀도

The resulting CoOOH/Fe2O3 exhibits a remarkably improved photocurrent density of 2.

생성된 CoOOH/Fe2O3는 2의 현저히 개선된 광전류 밀도를 나타냅니다.

Chelation-mediated in-situ formation of ultrathin cobalt (oxy)hydroxides on hematite photoanode towards enhanced photoelectrochemical water oxidation

More Improved Photocurrent Density sentences
향상된 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Increased Photocurrent Density

Increased Photocurrent Density
광전류 밀도 증가

The Sb2S3-modified BiVO4 film exhibits an increased photocurrent density of 1.

Sb2S3로 수정된 BiVO4 필름은 1의 증가된 광전류 밀도를 나타냅니다.

Sb2S3 surface modification for improved photoelectrochemical water splitting performance of BiVO4 photoanode

Increased Photocurrent Density
광전류 밀도 증가

Without typical doping or cocatalyst, surface polarized TiO2 photoanode delivers a considerably increased photocurrent density of about 1.

일반적인 도핑이나 조촉매 없이 표면 편광된 TiO2 광양극은 약 1의 상당히 증가된 광전류 밀도를 제공합니다.

Surface polarization enables high charge separation in TiO2 nanorod photoanode

More Increased Photocurrent Density sentences
광전류 밀도 증가 More Sentences

Photocurrent Density sentence examples within Excellent Photocurrent Density

Excellent Photocurrent Density
우수한 광전류 밀도

As expected, the as-engineered TiO 2 /α-Fe 2 O 3 /Cu:NiOx/Co-Piphotoanode displays an excellent photocurrent density of 2.

예상대로 설계된 대로 TiO 2 /α-Fe 2 O 3 /Cu:NiOx/Co-Piphotoanode는 2의 우수한 광전류 밀도를 나타냅니다.

Enhanced Photoelectrochemical Water Oxidation Performance in Bilayer TiO2/α-Fe2O3 Nanorod Arrays Photoanode With Cu:NiOx as Hole Transport Layer and Co-Pi as Co-catalyst.

Excellent Photocurrent Density
우수한 광전류 밀도

The optimal sample exhibits an excellent photocurrent density of 3.

최적의 샘플은 3의 우수한 광전류 밀도를 나타냅니다.

Amorphous iron (III)-borate decorated electrochemically treated-BiVO4 photoanode for efficient photoelectrochemical water splitting

More Excellent Photocurrent Density sentences
우수한 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Remarkable Photocurrent Density

Remarkable Photocurrent Density
놀라운 광전류 밀도

The optimized TFF displays a remarkable photocurrent density of 0.

최적화된 TFF는 0의 놀라운 광전류 밀도를 표시합니다.

Engineering the heterogeneous interfaces of inverse opals to boost charge transfer for efficient solar water splitting

Remarkable Photocurrent Density
놀라운 광전류 밀도

Consequently, the UiO-66/Pd/S,N GQDs photoanode has indicated a remarkable photocurrent density of ≈300 μA cm−2 at 1.

결과적으로 UiO-66/Pd/S,N GQDs 광양극은 1에서 ≈300μA cm-2의 놀라운 광전류 밀도를 나타냅니다.

Photoelectrochemical water splitting by a novel design of photo-anode: inverse opal-like UiO-66 sensitized by Pd and decorated with S,N graphene QDs

More Remarkable Photocurrent Density sentences
놀라운 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Saturated Photocurrent Density

Saturated Photocurrent Density
포화 광전류 밀도

Benefiting from these features, the PEC devices based on C-dots exhibit a saturated photocurrent density as high as ~4 mA/cm2 at 0.

이러한 기능의 이점을 통해 C-도트를 기반으로 하는 PEC 장치는 0에서 ~4mA/cm2만큼 높은 포화 광전류 밀도를 나타냅니다.

Colloidal carbon quantum dots as light absorber for efficient and stable ecofriendly photoelectrochemical hydrogen generation

Saturated Photocurrent Density
포화 광전류 밀도

Based on the synergistic effect of QD’s broad light absorption and excellent charge extraction/transport properties of TiO2/GO film, as-assembled QDs-photoanode exhibits an outstanding saturated photocurrent density of ~6.

QD의 넓은 광 흡수와 TiO2/GO 필름의 우수한 전하 추출/수송 특성의 시너지 효과를 기반으로 조립된 QD-광양극은 ~6의 뛰어난 포화 광전류 밀도를 나타냅니다.

Near-infrared, eco-friendly ZnAgInSe quantum dots-sensitized graphene oxide-TiO2 hybrid photoanode for high performance photoelectrochemical hydrogen generation

More Saturated Photocurrent Density sentences
포화 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Transient Photocurrent Density

Transient Photocurrent Density
과도 광전류 밀도

Photoelectrochemical properties were investigated by transient photocurrent density (TPR) and electrochemical impedance spectroscopy (EIS).

광전기화학적 특성은 TPR(Transient Photocurrent Density) 및 EIS(Electrochemical Impedance Spectroscopy)로 조사하였다.

Photocatalytic degradation of methylene blue under UV and visible light by brookite–rutile bi-crystalline phase of TiO2

Transient Photocurrent Density
과도 광전류 밀도

The transient photocurrent density (0.

과도 광전류 밀도(0.

The quaternary system of Ag2S/ZnS co-modified ZnO/TiO2 nanotree arrays: Excellent photocatalysis and photoelectrochemistry performance

More Transient Photocurrent Density sentences
과도 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Best Photocurrent Density

Best Photocurrent Density
최고의 광전류 밀도

The photoelectrochemical (PEC) performance of the Co3O4/TiO2 photoelectrodes has been significantly improved compared with the pure TiO2, the best photocurrent density of Co3O4/TiO2 photoelectrode could reach 1.

Co3O4/TiO2 광전극의 광전기화학적(PEC) 성능은 순수한 TiO2에 비해 크게 향상되었으며 Co3O4/TiO2 광전극의 최고의 광전류 밀도는 1에 도달할 수 있습니다.

Metal-organic framework derived Co3O4/TiO2 heterostructure nanoarrays for promote photoelectrochemical water splitting

Best Photocurrent Density
최고의 광전류 밀도

The Pt/CdxZn1-xS/Sb2Se3 photocathode achieved the best photocurrent density of 17.

Pt/CdxZn1-xS/Sb2Se3 광음극은 17의 최고의 광전류 밀도를 달성했습니다.

CdxZn1-xS/Sb2Se3 thin film photocathode for efficient solar water splitting

More Best Photocurrent Density sentences
최고의 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Optimal Photocurrent Density

Optimal Photocurrent Density
최적의 광전류 밀도

The optimal photocurrent density of ZnSe-0.

ZnSe-0의 최적 광전류 밀도.

Effect of various mass ratios of graphene quantum dots doping on the photoelectric performance of ZnSe-GQDs nanocomposites

Optimal Photocurrent Density
최적의 광전류 밀도

On account of the synergistic effect of the core-shell heterojunction in ZnO@CuO with cocatalyst ZnFe-LDH, this photoanode exhibits an optimal photocurrent density of 2.

조촉매 ZnFe-LDH와 함께 ZnO@CuO에서 코어-쉘 이종접합의 시너지 효과로 인해 이 광양극은 2의 최적 광전류 밀도를 나타냅니다.

A ZnO@CuO core-shell heterojunction photoanode modified with ZnFe-LDH for efficient and stable photoelectrochemical performance.

More Optimal Photocurrent Density sentences
최적의 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Low Photocurrent Density

Low Photocurrent Density
낮은 광전류 밀도

However, the poor photoresponse, low photocurrent density and easy electron-hole recombination remarkably restrict the HER activity of the conventional photocatalyst.

그러나 열악한 광응답, 낮은 광전류 밀도 및 용이한 전자-정공 재결합은 기존 광촉매의 HER 활성을 현저하게 제한한다.

CdS@h-BN heterointerface construction on reduced graphene oxide nanosheets for hydrogen production

Low Photocurrent Density
낮은 광전류 밀도

In response, well-defined planar Fe2O3–TiO2 heterostructures were manufactured, and measurements confirm the formation of a type I band alignment in the case of Fe2O3–TiO2, with very low photocurrent density as a result.

이에 대한 응답으로, 잘 정의된 평면 Fe2O3-TiO2 이종 구조가 제조되었고, 측정 결과 매우 낮은 광전류 밀도를 갖는 Fe2O3-TiO2의 경우 유형 I 밴드 정렬의 형성이 확인되었습니다.

Hydrogen induced interface engineering in Fe2O3–TiO2 heterostructures for efficient charge separation for solar-driven water oxidation in photoelectrochemical cells

More Low Photocurrent Density sentences
낮은 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Superior Photocurrent Density

Superior Photocurrent Density
우수한 광전류 밀도

15) show superior photocurrent density compared to pure ZnO-based photoanodes.

15) 순수한 ZnO 기반 광양극에 비해 우수한 광전류 밀도를 보여줍니다.

Fabrication of Mn–ZnO photoanodes for photoelectrochemical water splitting applications

Superior Photocurrent Density
우수한 광전류 밀도

The judiciously designed NiOOH/FeOOH/Co3 O4 /BiVO4 photoanode renders a superior photocurrent density of 6.

신중하게 설계된 NiOOH/FeOOH/Co3O4/BiVO4 광양극은 6의 우수한 광전류 밀도를 제공합니다.

General and Robust Photothermal-Heating-Enabled High-Efficiency Photoelectrochemical Water Splitting.

More Superior Photocurrent Density sentences
우수한 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Stronger Photocurrent Density

Stronger Photocurrent Density
더 강한 광전류 밀도

The results indicated that the PbS(6)/TiO2 nanotubes displayed a stronger photocurrent density of 3.

결과는 PbS(6)/TiO2 나노튜브가 3의 더 강한 광전류 밀도를 나타냄을 나타냅니다.

Effective photocathodic protection for 304 stainless steel by PbS quantum dots modified TiO2 nanotubes

Stronger Photocurrent Density
더 강한 광전류 밀도

Compared with pure CdS, Ni2P/ CdS presented lower fluorescence intensity and stronger photocurrent density, which demonstrated that the 2D/2D Ni2P/CdS heterojunction photocatalyst significantly improved the separation efficiency of photogenerated electrons and holes.

순수한 CdS와 비교하여 Ni2P/CdS는 더 낮은 형광 강도와 더 강한 광전류 밀도를 나타냈으며, 이는 2D/2D Ni2P/CdS 이종접합 광촉매가 광생성 전자와 정공의 분리 효율을 크게 향상시켰음을 보여줍니다.

Two dimensional Ni2P/CdS photocatalyst for boosting hydrogen production under visible light irradiation

More Stronger Photocurrent Density sentences
더 강한 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Achieved Photocurrent Density

Achieved Photocurrent Density

A maximum achieved photocurrent density (1.

Magnetron sputtering strategy for Zr-Fe2O3 nanorod photoanode fabricated from ZrOx/β-FeOOH nanorods for photoelectrochemical water splitting

Achieved Photocurrent Density

Dense, uniform CuBi2O4/NiO thin film photocathodes grown by pulsed laser deposition achieved photocurrent density over 1.

Long-term stabilized high-density CuBi2O4/NiO heterostructure thin film photocathode grown by pulsed laser deposition.

More Achieved Photocurrent Density sentences
More Sentences

Photocurrent Density sentence examples within Large Photocurrent Density

Large Photocurrent Density
큰 광전류 밀도

Such a high photocatalytic performance over SrRuO3/g-C3N4 photocatalysts was explained by the characteristics of SrRuO3 NPs incorporated on porous g-C3N4 layers, which demonstrate strong absorption of visible light with a narrow band gap, a large photocurrent density of ∼9.

SrRuO3/g-C3N4 광촉매에 대한 이러한 높은 광촉매 성능은 다공성 g-C3N4 층에 통합된 SrRuO3 나노입자의 특성으로 설명되며, 이는 좁은 밴드 갭, ~9의 큰 광전류 밀도로 가시광선의 강한 흡수를 나타냅니다.

Intense Visible-Light Absorption in SrRuO3/C3N4 Heterostructures for the Highly Efficient Reduction of Hg(II)

Large Photocurrent Density
큰 광전류 밀도

The advantage of the activity should be attributed to the synergy of many favorable factors, such as the shape of flake, large specific surface area, open pore structure, high valence band potential, low photogenerated carrier recombination rate, large photocurrent density and low electron transfer impedance.

활성의 이점은 플레이크의 모양, 큰 비표면적, 열린 기공 구조, 높은 가전자대 전위, 낮은 광발생 캐리어 재결합 속도, 큰 광전류 밀도 및 낮은 전자 전달과 같은 많은 유리한 요인의 시너지에 기인해야 합니다. 임피던스.

Metal-free polymeric carbon nitride photocatalytic bactericide: precursor-controlled killing activity of E. coli

More Large Photocurrent Density sentences
큰 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Largest Photocurrent Density

Largest Photocurrent Density
최대 광전류 밀도

Under 1 sun illumination, the optimized 2CoPc(NH2)4/BiVO4 photoelectrode exhibits the largest photocurrent density of 3.

1 태양 조명에서 최적화된 2CoPc(NH2)4/BiVO4 광전극은 3의 가장 큰 광전류 밀도를 나타냅니다.

Efficient photoelectrochemical water oxidation of cobalt phthalocyanine decorated BiVO4 photoanode by improving kinetics

Largest Photocurrent Density
최대 광전류 밀도

The BiVO4/GO/CoTPP(OH)4 is found to exhibit the largest photocurrent density of 5.

BiVO4/GO/CoTPP(OH)4는 5의 가장 큰 광전류 밀도를 나타내는 것으로 밝혀졌습니다.

Regulating the type of cobalt porphyrins for synergistic promotion of photoelectrochemical water splitting of BiVO4

More Largest Photocurrent Density sentences
최대 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Calculated Photocurrent Density

Calculated Photocurrent Density
계산된 광전류 밀도

Calculated photocurrent density (Jph) (by weighting the spectrally resolved absorptance with AM1.

계산된 광전류 밀도(Jph)(AM1로 분광 분해 흡광도를 가중하여.

Design of deterministic light-trapping structures for thin silicon heterojunction solar cells.

Calculated Photocurrent Density
계산된 광전류 밀도

By constructing the proper model, the calculated photocurrent density (Jsc) of 23.

적절한 모델을 구성하여 계산된 광전류 밀도(Jsc)는 23입니다.

Toward high efficiency for long-term stable Cesium doped hybrid perovskite solar cells via effective light management strategy

More Calculated Photocurrent Density sentences
계산된 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Evolution Photocurrent Density

Evolution Photocurrent Density
진화 광전류 밀도

The resulting nanoporous film achieves a H2 evolution photocurrent density up to 5 mA cm−2 demonstrating that the patch-like hetero-structures represent an effective strategy to simultaneously improve hole collection, defect passivation and charge transfer.

생성된 나노다공성 필름은 최대 5mA cm-2의 H2 진화 광전류 밀도를 달성하여 패치와 같은 이종 구조가 정공 수집, 결함 패시베이션 및 전하 이동을 동시에 개선하는 효과적인 전략을 나타냄을 보여줍니다.

Patch-like, two dimensional WSe2-based hetero-structures activated by a healing catalyst for H2 photocatalytic generation

Evolution Photocurrent Density
진화 광전류 밀도

As a result, the Cu-metallated acetylenic polymers on a photocathode exhibit a hydrogen-evolution photocurrent density of 7–70 μA cm−2 at 0.

결과적으로 광음극의 Cu 금속화 아세틸렌계 고분자는 0에서 7-70μA cm-2의 수소 진화 광전류 밀도를 나타냅니다.

Solvent-mediated engineering of copper-metalated acetylenic polymer scaffolds with enhanced photoelectrochemical performance

More Evolution Photocurrent Density sentences
진화 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Pec Photocurrent Density

Pec Photocurrent Density
Pec 광전류 밀도

As a result, the PEC photocurrent density and photoconversion efficiency of the few-layer MoS2 nanosheets significantly increased upon the insertion of a graphene layer.

그 결과, 그래핀 층의 삽입에 따라 소수층 MoS2 나노시트의 PEC 광전류 밀도와 광변환 효율이 크게 증가하였다.

Improved Photoelectrochemical Performance of MoS2 through Morphology-Controlled Chemical Vapor Deposition Growth on Graphene

Pec Photocurrent Density
Pec 광전류 밀도

The 5Au- BiVO4 photoelectrode displayed a considerable improvement (~29 times) in the PEC photocurrent density compared to that of the pure BiVO4 photoanode.

5Au-BiVO4 광전극은 순수한 BiVO4 광양극에 비해 PEC 광전류 밀도에서 상당한 개선(~29배)을 나타냈다.

Au-doped BiVO4 nanostructure-based photoanode with enhanced photoelectrochemical solar water splitting and electrochemical energy storage ability

More Pec Photocurrent Density sentences
Pec 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Measured Photocurrent Density

Measured Photocurrent Density
측정된 광전류 밀도

When doped with Zr, the measured photocurrent density of the Ta3N5 photoanode increased from 5.

Zr을 도핑하면 Ta3N5 광양극의 측정된 광전류 밀도가 5에서 증가했습니다.

Carrier engineering of Zr-doped Ta3N5 film as an efficient photoanode for solar water splitting

Measured Photocurrent Density
측정된 광전류 밀도

Furthermore, the photodetector was capable of operating at low bias potential, with measured photocurrent density and dark current up to ∼ 47 μA/cm2 and ∼ 3 μA/cm2, respectively at 0.

게다가, 광검출기는 낮은 바이어스 전위에서 작동할 수 있었고, 측정된 광전류 밀도와 암전류는 각각 0에서 최대 47μA/cm2 및 3μA/cm2였다.

Characteristics and Sensing of Sol-gel derived Titanium Dioxide-based Ultraviolet Photodetector on Flame Retardant-4 Board

More Measured Photocurrent Density sentences
측정된 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Average Photocurrent Density

Average Photocurrent Density
평균 광전류 밀도

Compared to the bare hematite, the average photocurrent density, as a measure of the PEC activity, was found to be improved by 0.

노출된 적철광과 비교하여 PEC 활성의 척도인 평균 광전류 밀도는 0만큼 개선된 것으로 나타났습니다.

Au@SiO2@Au core-shell-shell nanoparticles for enhancing photocatalytic activity of hematite

Average Photocurrent Density
평균 광전류 밀도

The enhanced photocatalytic (PC) performance of as-synthesized materials was exemplified by the test of photocurrent, which revealing that the average photocurrent density of Cu2O/TNAs (0.

합성된 재료의 향상된 광촉매(PC) 성능은 광전류 테스트에 의해 예시되었으며, 이는 Cu2O/TNA의 평균 광전류 밀도가

LED-driven photocatalysis of toluene, trichloroethylene and formaldehyde by cuprous oxide modified titanate nanotube arrays.

More Average Photocurrent Density sentences
평균 광전류 밀도 More Sentences

Photocurrent Density sentence examples within Dependent Photocurrent Density

Dependent Photocurrent Density

Time-dependent photocurrent density results affirmed the stability in processed devices.

시간에 따른 광전류 밀도 결과는 처리된 장치의 안정성을 확인했습니다.

Neodymium (Nd) based oxide perovskite nanostructures for photocatalytic and photoelectrochemical water splitting functions.

Dependent Photocurrent Density

By evaluating the magnetic field dependent photocurrent density and photoluminescence, we postulate that the spin-dependent polaron pair dissociation at charge transfer states due to a significant singlet generation may prove critical for the photocurrent production.

자기장 의존적 광전류 밀도와 광발광을 평가함으로써, 우리는 상당한 단일항 생성으로 인한 전하 이동 상태에서의 스핀 의존 폴라론 쌍 해리가 광전류 생산에 중요한 것으로 입증될 수 있다고 가정합니다.

Spin dependent polaron pair dissociation at charge transfer states enables low driving force for nonfullerene organic photovoltaic system

More Dependent Photocurrent Density sentences
More Sentences

Photocurrent Density sentence examples within Fold Photocurrent Density

Fold Photocurrent Density

4-fold photocurrent density increment.

4배 광전류 밀도 증가.

Unbranched Hybrid Conducting Redox Polymers for Intact Chloroplast-Based Photobioelectrocatalysis.

Fold Photocurrent Density

7 folds photocurrent density enhancement compared to pristine anatase and rutile phase TiO2 arrays, respectively.

원시 아나타제 및 루틸상 TiO2 어레이에 비해 각각 7배 광전류 밀도 향상.

Oriented titania nanotube biphase junction arrays on water splitting

More Fold Photocurrent Density sentences
More Sentences

Photocurrent Density sentence examples within Significant Photocurrent Density

Significant Photocurrent Density

The dual effect of Co2+ doping makes the ZnIn2S4 homojunction achieve a significant photocurrent density of 0.

Co2+ 도핑의 이중 효과는 ZnIn2S4 동종 접합이 0의 상당한 광전류 밀도를 달성하도록 합니다.

Construction homojunction and co-catalyst in ZnIn2S4 photoelectrode by Co ion doping for efficient photoelectrochemical water splitting

Significant Photocurrent Density

21 eV and exhibit a significant photocurrent density at near band-edge illumination.

21eV이고 밴드 에지 근처 조명에서 상당한 광전류 밀도를 나타냅니다.

Defect-rich, negatively-charged SnS2 nanosheets for efficient photocatalytic Cr(VI) reduction and organic dye adsorption in water.

More Significant Photocurrent Density sentences
More Sentences

Photocurrent Density sentence examples within photocurrent density compared

photocurrent density compared
광전류 밀도 비교

15) show superior photocurrent density compared to pure ZnO-based photoanodes.

15) 순수한 ZnO 기반 광양극에 비해 우수한 광전류 밀도를 보여줍니다.

Fabrication of Mn–ZnO photoanodes for photoelectrochemical water splitting applications

photocurrent density compared
광전류 밀도 비교

59 mA/cm2, respectively, manifesting 209% and 623% increments in the photocurrent density compared to that shown by B-TiO2 NRs photoanode.

각각 59mA/cm2이며, B-TiO2 NRs 광양극에 의해 표시되는 것과 비교하여 광전류 밀도에서 209% 및 623% 증가를 나타냅니다.

Localized surface plasmon-enhanced photoelectrochemical water oxidation by inorganic/organic nano-heterostructure comprising NDI-based D-A-D type small molecule.

More photocurrent density compared sentences
광전류 밀도 비교 More Sentences

Photocurrent Density sentence examples within photocurrent density achieved

photocurrent density achieved
광전류 밀도 달성

The photocurrent density achieved by the 30% h-PBNs/CdSe heterostructure is 1.

30% h-PBNs/CdSe 헤테로구조에 의해 달성된 광전류 밀도는 1입니다.

CdSe quantum dot/white graphene hexagonal porous boron nitride sheet (h-PBNs) heterostructure photocatalyst for solar driven H2 production

photocurrent density achieved
광전류 밀도 달성

The (NiFe)1:1-LDH/TiO2 photoanode possesses an extraordinary photocatalytic activity, and the photocurrent density achieved 1.

(NiFe)1:1-LDH/TiO2 광양극은 특별한 광촉매 활성을 가지며 광전류 밀도는 1을 달성했습니다.

A highly efficient NiFe-layer double hydroxide/TiO2 heterojunction photoanode-based high-performance bifunctional photocatalytic fuel cell

More photocurrent density achieved sentences
광전류 밀도 달성 More Sentences

Photocurrent Density sentence examples within photocurrent density reached

photocurrent density reached
광전류 밀도 도달

In this work, Molybdenum (Mo) doped bismuth vanadate (BiVO4) is carried out by traditional calcination method, while carbon-based cobalt (Co-Ci) is prepared by photoelectric deposition (PED) and used as co-catalyst to decorate the surface, its photocurrent density reached 3.

이 연구에서 몰리브덴(Mo) 도핑된 비스무트 바나데이트(BiVO4)는 전통적인 소성 방법으로 수행되는 반면 탄소 기반 코발트(Co-Ci)는 광전 증착(PED)에 의해 제조되어 표면을 장식하는 조촉매로 사용됩니다. , 광전류 밀도는 3에 도달했습니다.

The hydrophilic treatment of a novel co-catalyst for greatly improving the solar water splitting performance over Mo-doped bismuth vanadate.

photocurrent density reached
광전류 밀도 도달

05C∙cm−2, the photocurrent density reached 2.

05C∙cm-2, 광전류 밀도는 2에 도달했습니다.

Study on cobalt-phosphate (Co-Pi) modified BiVO4/Cu2O photoanode to significantly inhibit photochemical corrosion and improve the photoelectrochemical performance

More photocurrent density reached sentences
광전류 밀도 도달 More Sentences

Photocurrent Density sentence examples within photocurrent density value

photocurrent density value
광전류 밀도 값

Even though the preparation of perovskite precursors and the corresponding PSCs have been performed entirely under ambient and uncontrolled conditions, by taking advantage of the recently reported deposition engineering techniques, a complete crystallization at the photoactive perovskite phase has been succeeded, as demonstrated by the high photocurrent density values that have been obtained, which exceed 22 mA/cm2.

페로브스카이트 전구체 및 해당 PSC의 준비가 완전히 주변 및 제어되지 않은 조건에서 수행되었지만 최근 보고된 증착 엔지니어링 기술을 활용하여 높은 광전류에 의해 입증된 바와 같이 광활성 페로브스카이트 단계에서 완전한 결정화에 성공했습니다. 얻은 밀도 값이 22mA/cm2를 초과합니다.

A facile, low-cost and industrially feasible method to implement complex structured perovskites, in stable, C-based perovskite solar cells

photocurrent density value
광전류 밀도 값

Results indicated that optimal α-Fe2O3 photoanodes performance are obtained when nanopillars reach hundreds of nanometers in diameter, achieving for photoanodes with 400 nm nanopillars onto TiO2 supports the highest photocurrent density values.

결과는 나노기둥이 직경이 수백 나노미터에 도달할 때 최적의 α-Fe2O3 광양극 성능이 얻어지며 TiO2에 400nm 나노기둥이 있는 광양극에 대해 달성하여 가장 높은 광전류 밀도 값을 지원함을 나타냅니다.

Optimization of α-Fe2O3 Nanopillars Diameters for Photoelectrochemical Enhancement of α-Fe2O3-TiO2 Heterojunction

More photocurrent density value sentences
광전류 밀도 값 More Sentences

Photocurrent Density sentence examples within photocurrent density increased

photocurrent density increased
광전류 밀도 증가

Compared to bare TiO2 and bare Q235, the TiO2/GO/PANI/EP coating exhibited prominent photoelectrochemical properties, such as the photocurrent density increased 0.

베어 TiO2 및 베어 Q235와 비교하여 TiO2/GO/PANI/EP 코팅은 광전류 밀도가 0 증가하는 것과 같은 현저한 광전기화학적 특성을 나타냈다.

Design an Epoxy Coating with TiO2/GO/PANI Nanocomposites for Enhancing Corrosion Resistance of Q235 Carbon Steel

photocurrent density increased
광전류 밀도 증가

Because the face-to-face contact between 1 T and 2H MoS2 and g-C3N4 forms strong interfacial electron coupling, the optical response range became broad, the photocurrent density increased, and the recombination rate of photogenerated electron and hole decreased.

1T와 2H MoS2와 g-C3N4 사이의 대면 접촉은 강한 계면 전자 결합을 형성하기 때문에 광학 응답 범위가 넓어지고 광전류 밀도가 증가하며 광 발생 전자와 정공의 재결합 속도가 감소합니다.

2D/2D MoS2/g-C3N4 layered heterojunctions with enhanced interfacial electron coupling effect

More photocurrent density increased sentences
광전류 밀도 증가 More Sentences

Photocurrent Density sentence examples within photocurrent density revealed

photocurrent density revealed
광전류 밀도 공개

Because g-C3N4 nanosheets (sample CN670) with higher photocurrent density revealed the lowest photoreduction Cr(VI) ability, adsorption plays an important role in Cr(VI) removal.

더 높은 광전류 밀도를 가진 g-C3N4 나노시트(샘플 CN670)는 가장 낮은 광환원 Cr(VI) 능력을 나타내므로 흡착은 Cr(VI) 제거에 중요한 역할을 합니다.

Construction of 2D/2D MoS2/g-C3N4 Heterostructures for Photoreduction of Cr (VI).

photocurrent density revealed
광전류 밀도 공개

The photoelectrochemical cell measurement based on photocurrent density revealed a slight response to light.

광전류 밀도를 기반으로 한 광전기화학 전지 측정은 빛에 약간의 반응을 보였다.

Photocatalytic activity and photoelectrochemical properties of Ag/ZnO core/shell nanorods under low-intensity white light irradiation

More photocurrent density revealed sentences
광전류 밀도 공개 More Sentences

Photocurrent Density sentence examples within photocurrent density flowing

photocurrent density flowing
광전류 밀도 흐르는

It is easier to increase the number of unit cells in lateral tandem cells compared to conventional vertical tandem cells because the adjustment of photocurrent density flowing in each unit cell is no longer necessary.

기존의 수직 탠덤 셀에 비해 측면 탠덤 셀의 단위 셀 수를 늘리는 것은 각 단위 셀에 흐르는 광전류 밀도의 조정이 더 이상 필요하지 않기 때문에 더 쉽습니다.

Lateral-tandem organic photovoltaic cells with carrier transport and generation layers

photocurrent density flowing
광전류 밀도 흐르는

In this study, we measured the recombination emission from the CT state under different applied voltage in the OSC device and a photocurrent density flowing on the circuit simultaneously.

본 연구에서는 OSC 소자에 서로 다른 인가 전압과 회로에 흐르는 광전류 밀도를 동시에 측정한 CT 상태의 재결합 방출을 측정하였다.

Simultaneous Measurement of Photocurrent and Recombination Emission in Organic Solar Cell

More photocurrent density flowing sentences
광전류 밀도 흐르는 More Sentences

More Photocurrent Density 광전류 밀도 sentence examples
10.1016/J.MATCHEMPHYS.2021.124977

Finally, the photoelectrochemical properties of the hematite nano octahedron film is studied, and a photocurrent density of 200 μA/cm2 is obtained for non -Urea mediated one (24 O.

마지막으로 적철광 나노 팔면체 필름의 광전기화학적 특성을 연구하고 비요소매개 필름(24O.

Direct thermal decomposition of FeCl3.6H2O in oleic acid forms hematite cube and nano octahedron structure with quasicrystalline and supercell symmetries for enhanced photoelectrochemical functionality

More Photocurrent Density 광전류 밀도 sentence examples
10.1016/J.IJHYDENE.2021.01.113

The photocurrent density of 6%(Fe, Ni)-60ml photoelectrode reached up to 13.

6%(Fe, Ni)-60ml 광전극의 광전류 밀도는 최대 13에 도달했습니다.

Outstanding stability and photoelectrochemical catalytic performance of (Fe, Ni) co-doped Co3O4 photoelectrodes for solar hydrogen production

More Photocurrent Density 광전류 밀도 sentence examples
10.1007/s11814-021-0750-3

Furthermore, after surface amendment with a 1 mM Co(OAc)2 solution, the CoOx encapsulated acid-treated Zr-Fe2O3 NC photoanode exhibited a photocurrent density of 1.

또한, 1mM Co(OAc)2 용액으로 표면 개질한 후, CoOx 캡슐화된 산 처리된 Zr-Fe2O3 NC 광양극은 1의 광전류 밀도를 나타냈다.

Engineering of cobalt oxide-integrated nitric acid-functionalized Zr-Fe2O3 nanocoral photoanodes for photoelectrochemical water splitting

More Photocurrent Density 광전류 밀도 sentence examples
10.1016/J.MSSP.2021.105933

FTO/annealed CdS:Cu/Pt photoanode were fabricated to enhance the photocurrent activity and the photocurrent density of FTO/annealed CdS:Cu/5 nm Pt is 1.

FTO/annealed CdS:Cu/Pt 광양극은 광전류 활성을 향상시키기 위해 제작되었으며 FTO/annealed CdS:Cu/5nm Pt의 광전류 밀도는 1입니다.

Influence of Cu doping on physical and photo-electrochemical properties of CdS thin films prepared by RF magnetron sputtering

More Photocurrent Density 광전류 밀도 sentence examples
10.1016/J.JPHOTOCHEM.2021.113433

Also, by coupling an optimum dosage of NiO, the photocurrent density and photoconversion efficiency of TNTs were remarkably boosted from 0.

또한 최적의 NiO 주입량을 결합하여 TNT의 광전류 밀도와 광변환 효율을 0에서 크게 향상 시켰습니다.

Construction of NiO and Ti3+ self-doped TNTs thin film as a high quantum yield p-n type heterojunction via a novel photoelectrodeposition-assisted anodization method

More Photocurrent Density 광전류 밀도 sentence examples
10.1063/5.0061734

As a consequence, the photocurrent density was greatly improved by adding the NiOx layer in the Fe2O3-Ti photoanode, reaching 1.

그 결과 Fe2O3-Ti 광양극에 NiOx 층을 추가하여 광전류 밀도가 1에 도달하여 크게 향상되었습니다.

Modification of Ti-doped hematite nanowires with a NiOx buffer layer for improved photoelectrochemical performance

More Photocurrent Density 광전류 밀도 sentence examples
10.1039/D1CE00205H

TiO2 nanorods with oxygen vacancies are produced via a facial, controllable and scalable high energy electron beam irradiation treatment, resulting in a remarkable enhancement of photocurrent density of about 85.

산소 결손이 있는 TiO2 나노로드는 얼굴, 제어 및 확장 가능한 고에너지 전자빔 조사 처리를 통해 생성되어 약 85의 광전류 밀도가 현저하게 향상됩니다.

Surface oxygen vacancies of TiO2 nanorods by electron beam irradiation for efficient photoelectrochemical water splitting

More Photocurrent Density 광전류 밀도 sentence examples
10.1088/1361-6528/ac2650

3 μm showed a photocurrent density as high as 0.

3μm는 0만큼 높은 광전류 밀도를 보였다.

Structural, photocatalytic and photoelectrochemical properties of porous ZnO nanosheets prepared by air cold plasma

More Photocurrent Density 광전류 밀도 sentence examples
10.1016/S1872-2067(21)63829-9

The photocurrent density of the Ni(OH)2 QDs/α-Fe2O3 photoanode reached 1.

Ni(OH)2 QDs/α-Fe2O3 광양극의 광전류 밀도는 1에 도달했습니다.

Ni(OH)2 quantum dots as a stable cocatalyst modified α-Fe2O3 for enhanced photoelectrochemical water-splitting

More Photocurrent Density 광전류 밀도 sentence examples
10.1016/J.JPHOTOCHEM.2021.113190

Several complementary analyses of XRD, SEM, EDS, BET, photocurrent density, UV–vis DRS, TEM, HRTEM, PL, EIS, and XPS were applied to investigate the structure, texture, optical feature, and charge transfer efficiency of the as-prepared photocatalysts.

XRD, SEM, EDS, BET, 광전류 밀도, UV-vis DRS, TEM, HRTEM, PL, EIS 및 XPS의 여러 보완 분석을 적용하여 구조, 질감, 광학적 특성 및 전하 전달 효율을 조사했습니다. 준비된 광촉매.

Integration of Bi5O7I with TiO2: Binary photocatalysts with boosted visible-light photocatalysis in removal of organic contaminants

Keywords related to Density

Photocurrent Density 광전류 밀도

Photocurrent Density 광전류 밀도
Encyclopedia 백과사전

Photocurrent Density(광전류 밀도)란 무엇입니까?

Photocurrent Density 광전류 밀도 - Finally, the photoelectrochemical properties of the hematite nano octahedron film is studied, and a photocurrent density of 200 μA/cm2 is obtained for non -Urea mediated one (24 O. [1] The photocurrent density of 6%(Fe, Ni)-60ml photoelectrode reached up to 13. [2] Furthermore, after surface amendment with a 1 mM Co(OAc)2 solution, the CoOx encapsulated acid-treated Zr-Fe2O3 NC photoanode exhibited a photocurrent density of 1. [3] FTO/annealed CdS:Cu/Pt photoanode were fabricated to enhance the photocurrent activity and the photocurrent density of FTO/annealed CdS:Cu/5 nm Pt is 1. [4] Also, by coupling an optimum dosage of NiO, the photocurrent density and photoconversion efficiency of TNTs were remarkably boosted from 0. [5] As a consequence, the photocurrent density was greatly improved by adding the NiOx layer in the Fe2O3-Ti photoanode, reaching 1. [6] TiO2 nanorods with oxygen vacancies are produced via a facial, controllable and scalable high energy electron beam irradiation treatment, resulting in a remarkable enhancement of photocurrent density of about 85. [7] 3 μm showed a photocurrent density as high as 0. [8] The photocurrent density of the Ni(OH)2 QDs/α-Fe2O3 photoanode reached 1. [9] Several complementary analyses of XRD, SEM, EDS, BET, photocurrent density, UV–vis DRS, TEM, HRTEM, PL, EIS, and XPS were applied to investigate the structure, texture, optical feature, and charge transfer efficiency of the as-prepared photocatalysts. [10] The results manifest excellent photo-anodic PEC activity of these PFP-PAs, yielding a photocurrent density of ~9. [11] A WO3 photoanode subjected to Ar plasma treatment for 120 s exhibited a photocurrent density of 1. [12] The maximum values of the photocurrent density have been obtained for the sample prepared with laser emitting at 355 nm. [13] In presence of atrazine, the atrazine-aptamer complexes formed via atrazine-aptamer bonding on the photoelectrode, which increased the steric hindrance of the electron transfer and resulted in the change of the photocurrent density that was used to quantitatively determine atrazine. [14] In this study, we deposited a WO3 thin-film photoelectrode on a fluorine-doped tin oxide (FTO) substrate using a spin-coating method, and we investigated the photocurrent density and dark current density of the WO3 photoelectrode with various amounts of H2O2 additive. [15] An optimal O2 plasma treatment (200 W, 70 s) increases the photocurrent density of the Ti-Fe2O3 nanowire photoanode to 2. [16] The chemical bonding interface is conducive to transmission and separation of photocarriers to realize rapid and stable transport and separation through the interface, which is based on the photocurrent density of Bi2WO6/BiOI (BWOI) is about 6 and 40 times higher than Bi2WO6 and BiOI, and the transfer resistance of BWOI is around 5 and 10 times lower than Bi2WO6 and BiOI. [17] The photocurrent density of V-groove textured GaN NRs in the NaOH electrolyte is found to be 801. [18] Moreover, both the photocurrent density and incident photo-to-current conversion efficiency (IPCE) were further improved after the decoration of Co-Pi. [19] The results indicate that, due to the enhanced energy transfer from photoexcited QDs to graphene layer, light absorption is increased and excitons are generated led to the enhancement of photocurrent density. [20] The homogeneous deposition of 10 – 20 nm NCD onto the surface of BMCN increases the specific surface area and photocurrent density, which can facilitate the good charge transfer efficiency for the enhanced photodegradation of CIP. [21] This sample showed a photocurrent density of 202 µA/cm2, which is 4. [22] Further, the photoelectrochemical (PEC) water splitting measurements showed that the GaN thin film exhibited a photocurrent density of 0. [23] The absorption spectra, fluorescence spectra, photocurrent density, impedance spectra, and ESR radical measurements of eight different photocatalysts were investigated. [24] The crucial one is the anomalous hysteresis observed in the photocurrent density-voltage (J-V) response in PSC. [25] The photocurrent density of the optimized photoanode (MoS2-3@BiVO4) was 5. [26] Consequently, the BiVO4 photoanode with the crystalline-amorphous heterophase junction (a-BiVO4/c-BiVO4) exhibits almost twice the photocurrent density at 1. [27] Finally, photo-assisted water splitting tests are performed considering a CZTS/CdS/Pt photoelectrode, showing a photocurrent density of 1. [28] A photocurrent density of 4. [29] The photocurrent density of unpoled Bi0. [30] 58 µg/s occuring at the photocurrent density of 1. [31] As a result, the photocurrent density of the Li-doped LaFeO3 photocathode is increased from −30 μA cm−2 (LaFeO3) to −50 μA cm−2 at 0. [32] To this end, an optimized MoS2@BL-BiVO4 photoanode with reduced bulk and surface charge recombination was synthesized, exhibiting a photocurrent density of 2. [33] The photocurrent density of C-CuO-Cu2O/CF electrode can reach −1. [34] 8 in CdxZn1-xS composition boosted the photocurrent density, reaching from 25 μA cm−2 to 438 μA cm−2. [35] The photocurrent density of Co-9% S-gC3N4/BiOCl has attained 393. [36] The as-prepared four arm Ag2S zig-zag electrodes exhibited superior optical absorption, as well as photocurrent density of 3. [37] 67 V and photocurrent density of 11. [38] The effect of varying concentration of dopants on morphology and photocurrent density is closely investigated.