Photocatalytic Enhancement(광촉매 향상)란 무엇입니까?
Photocatalytic Enhancement 광촉매 향상 - The achieved progress demonstrates that the photocatalytic enhancement of zeolite-based composites is predominantly dependent on the enhanced adsorption performance, as well as the high separation and transfer efficiency of photogenerated charge carriers. [1] The photocatalytic enhancement of the sol catalyst was considered as a result of the band gap narrowing and the synergistic effects of band attachment in the nanocomposite. [2] Besides, the introduced Fe2+ on ZnO surface seems more beneficial for the photocatalytic enhancement. [3] In this review, the fundamental characteristics of graphene composites for photocatalytic enhancement, different preparation methods, its application in the treatment of recalcitrant organic compounds under UV and visible spectrum and the speculated mechanisms are discussed. [4] It appears that the SPR effect and internal electron transfer ability of Au NPs, depending on their sizes, play a synergistic effect on the photocatalytic enhancement. [5] Our study reveals that the photocatalytic enhancement by the LEF effect is superior to that by the traditional heterojunction effect based on polar supporting materials. [6] Photocatalytic enhancements in TiO2-NAA-μQVs are identified by monitoring the photodegradation of model organics with absorbance bands at specific positions within the visible spectral region. [7] The MT clay assisted in producing higher hydroxyl radicals and improving the solid-state oxidation of CS within the adsorbent sub-layer for the photocatalytic enhancement of TiO2/CS-MT than its counterpart TiO2/CS. [8] Finally, possible mechanism for the photocatalytic enhancement of the composite were put forward. [9] Under UV irradiation, the photocatalytic enhancement is mainly ascribed to the efficient separation of photogenerated electron/hole pairs caused by the smaller-sized Ag NPs, whereas the photocatalytic enhancement under visible light irradiation is dominantly due to the LSPR effects of the larger-sized Au NPs. [10] The photocatalytic activity suggest that an intimate interface contact, extended visible light absorption and effective photo generated charge carrier separation contributed to the photocatalytic enhancement of the CdS@MoS2 core shell. [11] The photocatalytic enhancement was attributed to the high separation efficiency of photogenerated electron–hole pairs based on the formation of heterojunction structures between the WO3/Nb2O5 and ZnO. [12] The photocatalytic enhancement is not only due to the increased number of active sites (larger surface area) of the porous particles but also due to the synergistic effects of the different alloying elements. [13] The photocatalytic enhancement of flower-like ZnO was ascribed to its unique architecture, good crystallinity and superior optical properties. [14] The photocatalytic enhancement was due to the strong adsorption and the higher charge separation efficiency of as-prepared g-C3N4/Na-bentonite composites. [15] Notably, density functional theory (DFT) calculations were employed to further understand the mechanism of the photocatalytic enhancement with regard to the optical absorption property at atomic level. [16] The fast adsorption kinetics of this composite film resulted in photocatalytic enhancement. [17]달성된 진전은 제올라이트 기반 복합재의 광촉매 향상이 주로 향상된 흡착 성능과 광생성 전하 캐리어의 높은 분리 및 전달 효율에 의존한다는 것을 보여줍니다. [1] 졸 촉매의 광촉매 향상은 밴드 갭이 좁아지고 나노복합체에서 밴드 부착의 시너지 효과의 결과로 간주됩니다. [2] 게다가, ZnO 표면에 도입된 Fe2+는 광촉매 향상에 더 유익한 것으로 보인다. [3] 이 리뷰에서는 광촉매 향상을 위한 그래핀 복합 재료의 기본 특성, 다양한 제조 방법, UV 및 가시광선 스펙트럼에서 난분해성 유기 화합물의 처리에 대한 응용 및 추측되는 메커니즘에 대해 논의합니다. [4] Au NP의 SPR 효과와 내부 전자 전달 능력은 크기에 따라 광촉매 향상에 시너지 효과를 발휘하는 것으로 보입니다. [5] 우리의 연구는 LEF 효과에 의한 광촉매 향상이 극성 지지 물질을 기반으로 한 기존의 이종 접합 효과에 의한 것보다 우수함을 보여줍니다. [6] TiO2-NAA-μQV의 광촉매 향상은 가시 스펙트럼 영역 내의 특정 위치에서 흡광 밴드가 있는 모델 유기물의 광분해를 모니터링하여 식별됩니다. [7] MT 점토는 대응하는 TiO2/CS보다 TiO2/CS-MT의 광촉매 향상을 위해 더 높은 하이드록실 라디칼을 생성하고 흡착제 하위층 내에서 CS의 고체 상태 산화를 개선하는 데 도움이 되었습니다. [8] 마지막으로 복합 재료의 광촉매 향상에 대한 가능한 메커니즘이 제시되었습니다. [9] UV 조사에서 광촉매 향상은 주로 더 작은 크기의 Ag NP에 의해 야기된 광 생성된 전자/정공 쌍의 효율적인 분리에 기인하는 반면, 가시광 조사 하에서 광촉매 향상은 더 큰 크기의 Au의 LSPR 효과로 인해 주로 발생합니다. NP. [10] 광촉매 활성은 친밀한 계면 접촉, 확장된 가시광선 흡수 및 효과적인 광 생성 전하 캐리어 분리가 CdS@MoS2 코어 쉘의 광촉매 향상에 기여했음을 시사합니다. [11] 광촉매 향상은 WO3/Nb2O5와 ZnO 사이의 이종 접합 구조 형성을 기반으로 한 광생성 전자-정공 쌍의 높은 분리 효율에 기인합니다. [12] 광촉매 향상은 다공성 입자의 증가된 활성 부위(더 큰 표면적)뿐만 아니라 다양한 합금 원소의 시너지 효과 때문입니다. [13] 꽃과 같은 ZnO의 광촉매 향상은 독특한 구조, 우수한 결정도 및 우수한 광학적 특성에 기인합니다. [14] 광촉매 향상은 준비된 g-C3N4/Na-벤토나이트 복합체의 강력한 흡착과 더 높은 전하 분리 효율 때문이었습니다. [15] 특히, 밀도 기능 이론(DFT) 계산은 원자 수준에서 광 흡수 특성과 관련하여 광촉매 향상 메커니즘을 더 이해하기 위해 사용되었습니다. [16] 이 복합 필름의 빠른 흡착 속도는 광촉매 향상을 가져왔습니다. [17]
Possible Photocatalytic Enhancement 가능한 광촉매 향상
A possible photocatalytic enhancement mechanism of Pd-BiFeO3 composite was stated. [1] The possible photocatalytic enhancement mechanism of the synthesized composite was proposed as well. [2] To gain better insights, a possible photocatalytic enhancement mechanism was also proposed. [3] Finally, the possible photocatalytic enhancement mechanism was proposed. [4]Pd-BiFeO3 복합재의 가능한 광촉매 향상 메커니즘이 언급되었습니다. [1] 합성된 합성물의 가능한 광촉매 향상 메커니즘도 제안되었다. [2] 더 나은 통찰력을 얻기 위해 가능한 광촉매 향상 메커니즘도 제안되었습니다. [3] 마지막으로 가능한 광촉매 향상 메커니즘이 제안되었습니다. [4]
Obviou Photocatalytic Enhancement 명백한 광촉매 향상
8S hollow heterojunction exhibits an obvious photocatalytic enhancement to about ~5822. [1] ZnO-g-C3N4@PET composite has been prepared by hydrothermal method, photoluminescence results indicated that ZnO-g-C3N4@PET has a low photo-generated charge recombination rate, while g-C3N4 improves the visible light response of the composite and exhibits an obvious photocatalytic enhancement effect. [2]8S 중공 이종 접합은 약 ~5822까지 명백한 광촉매 향상을 나타냅니다. [1] ZnO-g-C3N4@PET 복합물은 열수법으로 제조되었으며, 광발광 결과 ZnO-g-C3N4@PET는 광 발생 전하 재결합 속도가 낮은 반면 g-C3N4는 복합물의 가시광 응답을 향상시키고 명백한 광촉매 향상 효과. [2]
photocatalytic enhancement mechanism 광촉매 향상 메커니즘
The photocatalytic enhancement mechanisms can be attributed to multiple strategies, such as the large specific surface area, the enhanced conductivity, the generation of self-doped defects in Z-scheme m-TiO2/TiO2-x/CeO2-x heterojunction, which are beneficial for providing more active sites, extending the absorption range of solar light, and suppressing the recombination of photo-excited carriers. [1] In addition, the photocatalytic enhancement mechanism of BN/SW heterojunction was proposed. [2] The results of charge transfer dynamics and DFT calculation reveal that the photocatalytic enhancement mechanism is primarily attributed to the synergistic effects of crystallization of CN, excellent conductivity of Ti3C2 and well-constructed Schottky heterojunction. [3] In addition, the photocatalytic enhancement mechanism of the catalyst was studied. [4] A possible photocatalytic enhancement mechanism of Pd-BiFeO3 composite was stated. [5] The possible photocatalytic enhancement mechanism of the synthesized composite was proposed as well. [6] Finally, the photocatalytic enhancement mechanism for the TiO2/SnO heterojunction was proposed based on band alignments calculation and the active species trapping experiments. [7] In view of all the obtained experimental results, a photocatalytic enhancement mechanism for the MWCNTs/BiOCl composite is presented. [8] To gain better insights, a possible photocatalytic enhancement mechanism was also proposed. [9] Finally, the photocatalytic enhancement mechanism over p-Ag2S/n-BiVO4 was discussed. [10] Finally, the possible photocatalytic enhancement mechanism was proposed. [11] Furthermore, density functional theory calculations were applied to further understand the photocatalytic enhancement mechanism of the optical absorption properties at the atomic level after Co- or Mo-doping. [12] Based on experiment results, the photocatalytic enhancement mechanism for organic pollutants degradation and E. [13] • Photocatalytic enhancement mechanism of Cu3P/g-C3N4 composite was proposed. [14] The photocatalytic enhancement mechanism was elucidated by experimental means and theoretical calculations. [15]광촉매 향상 메커니즘은 큰 비표면적, 향상된 전도도, Z-scheme m-TiO2/TiO2-x/CeO2-x 이종 접합의 자가 도핑 결함 생성과 같은 여러 전략에 기인할 수 있습니다. 더 많은 활성 부위를 제공하고, 태양광의 흡수 범위를 확장하고, 광 여기된 캐리어의 재결합을 억제합니다. [1] 또한, BN/SW 이종접합의 광촉매 향상 메커니즘을 제안하였다. [2] 전하 이동 역학 및 DFT 계산의 결과는 광촉매 향상 메커니즘이 주로 CN의 결정화, Ti3C2의 우수한 전도도 및 잘 구성된 쇼트키 이종 접합의 시너지 효과에 기인한다는 것을 보여줍니다. [3] 또한, 촉매의 광촉매 향상 메커니즘을 연구하였다. [4] Pd-BiFeO3 복합재의 가능한 광촉매 향상 메커니즘이 언급되었습니다. [5] 합성된 합성물의 가능한 광촉매 향상 메커니즘도 제안되었다. [6] 마지막으로 TiO2/SnO 이종 접합에 대한 광촉매 향상 메커니즘은 밴드 정렬 계산 및 활성 종 트래핑 실험을 기반으로 제안되었습니다. [7] 얻어진 모든 실험 결과의 관점에서, MWCNTs/BiOCl 합성물에 대한 광촉매 향상 메커니즘이 제시된다. [8] 더 나은 통찰력을 얻기 위해 가능한 광촉매 향상 메커니즘도 제안되었습니다. [9] 마지막으로, p-Ag2S/n-BiVO4에 대한 광촉매 향상 메커니즘이 논의되었습니다. [10] 마지막으로 가능한 광촉매 향상 메커니즘이 제안되었습니다. [11] 또한 Co 또는 Mo 도핑 후 원자 수준에서 광흡수 특성의 광촉매 향상 메커니즘을 더 이해하기 위해 밀도 함수 이론 계산이 적용되었습니다. [12] 실험 결과를 바탕으로 유기오염물질 분해에 대한 광촉매 향상 메커니즘과 대장균. [13] • Cu3P/g-C3N4 합성물의 광촉매 향상 메커니즘을 제안하였다. [14] 광촉매 향상 메커니즘은 실험적 수단과 이론적 계산에 의해 해명되었다. [15]