Neutral Surface(중성 표면)란 무엇입니까?
Neutral Surface 중성 표면 - For materials exhibiting spontaneous polarization, we show that the conventional scheme of passivation with pseudo hydrogen is unable to realize a charge-neutral surface. [1] Based on the novel shear and normal deformation theory, the position of neutral surface is determined and the governing equilibrium equations based on neutral surface are derived. [2] A high molecular weight grade, hence less water-soluble, adsorbed preferentially on the neutral surface while the adsorbed amount on a negatively charged surface was independent of the molecular weight, and hence, solubility. [3] The most important factor affecting AC performance is the surface charge: a positively-charged AC showed higher adsorption capacities with greater Freundlich constants (KF) and later 50% breakthroughs compared to the AC with neutral surface. [4] The neutral surface is introduced to avoid the stretching-bending coupling effect. [5] Meanwhile, the neutral surface is adopted to avoid the stretching-bending coupling. [6] Current methods avoid the calculation of a first pattern drawing of the flattened part’s neutral surface, independent of the forming process, leading to several methodological limitations. [7] The optimal bioanode-ink contained MgOC pre-treated by washing to achieve a hydrophilic and neutral surface, which helped maintain enzyme activity and resulted in a highly porous electrode structure, which is essential for the accessibility of glucose to GOx. [8] In order to study the effects of different types of neutral surfaces, of different surface-water properties, on protein adsorption both bare and alkanethiol modified (-CH3 or -OH end-groups) Au surfaces with were used as model surfaces. [9] The effect of pH in the MD models was included by simulating Fe(II) adsorption onto negatively charged SiO2 surfaces and Fe(III) adsorption on neutral surfaces. [10] In the process of formulating the dynamic stiffness matrix, Kirchhoff-Love plate theory in tandem with the notion of neutral surface has been taken on board. [11] Mode surfaces are the generalization of degenerate curves and neutral surfaces, which constitute 3D symmetric tensor field topology. [12] To optimize the helical pattern design, the specific pitch size should be based on the line length of a single fold along the neutral surface when the as-received tube collapses. [13] Since there is no bifurcation point for FGMs, whenever both boundary conditions are rotational and the neutral surface does not match the mid-plane, the clamp configuration is examined only. [14] Optimum zones are found to lie near, but not coincident to, the mirror centroid and/or neutral surface. [15] The individual nonlinear theory of deformation of the straight line normal to the neutral surface is developed. [16] While extensive photoemission results have been obtained, the surface complexity of 122 caused by its charge-non-neutral surface is rarely considered. [17] In addition, the lower pHZPC of the FhSi/O3 system compared to that of the Fh/O3 system promoted the generation of neutral surface-hydroxyl species on the surface of FhSi, which enabled a decent catalytic performance in alkaline solutions, regardless of the catalytic cycle. [18] Degenerate curves and neutral surfaces are important topological features in 3D symmetric tensor fields. [19] The low value for ·A can be traced to initial ionisation of the adenine followed by significant geometric rearrangement on the neutral surface. [20] McDougall (1989) proved that neutral surfaces possess an exact geostrophic streamfunction, but its form has remained unknown. [21] For varying Cae, the simulations are conducted by considering a neutral surface. [22] In the sagittal plane, the specimens were loaded on a neutral surface, followed by 20o of dorsiflexion. [23] Neutral surfaces, along which most of the mixing in the ocean occurs, are notoriously difficult objects: they do not exist as well-defined surfaces, and as such can only be approximated. [24] The functionalization resulted in retention of nanoparticle shape, hindrance of plasma protein adsorption, maintenance of small hydrodynamic size, and establishment of a near-electroneutral surface. [25] As a result, the EGCg/PEI 600 co-deposited membrane, which possessed an electroneutral surface with the best hydrophilicity, exhibited the optimal separation performance among the co-deposited membranes in the context of textile wastewater treatment. [26] This paper deals with the problem of determining the radius of the neutral surface of the bending strip at the same time the action of tensile stresses. [27] In order to eliminate the axial displacement in the formulation, the concept of the neutral surface is adopted. [28] There has been much development of this method to simulate the interaction of organic molecules with neutral surfaces but relatively less information is available regarding the interactions with charged surfaces. [29] Polarity in surface layers is predicted to be visible in LEEM and MEM spectra at neutral surfaces, but much less when surfaces are charged. [30]자발적 분극을 나타내는 재료의 경우, 유사 수소를 사용한 기존의 패시베이션 방식이 전하 중성 표면을 실현할 수 없음을 보여줍니다. [1] 새로운 전단 및 법선 변형 이론을 기반으로 중립면의 위치가 결정되고 중립면을 기반으로 한 지배 평형 방정식이 도출됩니다. [2] 고분자량 등급이므로 덜 수용성이며 중성 표면에 우선적으로 흡착되는 반면 음으로 하전된 표면의 흡착량은 분자량 및 용해도와 무관합니다. [3] AC 성능에 영향을 미치는 가장 중요한 요소는 표면 전하입니다. 양으로 충전된 AC는 중성 표면을 가진 AC에 비해 더 큰 Freundlich 상수(KF)와 나중에 50% 돌파로 더 높은 흡착 용량을 보여주었습니다. [4] 신축-굽힘 결합 효과를 피하기 위해 중립 표면이 도입되었습니다. [5] 한편, 신축-굽힘 결합을 피하기 위해 중립 표면이 채택됩니다. [6] 현재의 방법은 성형 프로세스와 무관하게 평평한 부품의 중립 표면에 대한 첫 번째 패턴 드로잉의 계산을 피하여 몇 가지 방법론적 한계를 초래합니다. [7] 최적의 바이오애노드 잉크는 친수성 및 중성 표면을 얻기 위해 세척으로 사전 처리된 MgOC를 함유하여 효소 활성을 유지하는 데 도움이 되었고 GOx에 대한 포도당의 접근성에 필수적인 다공성 전극 구조를 생성했습니다. [8] 표면수 특성이 서로 다른 다양한 중성 표면이 단백질 흡착에 미치는 영향을 연구하기 위해 모델 표면으로 사용된 Au 표면과 알칸티올 변형된(-CH3 또는 -OH 말단기) Au 표면이 모두 사용되었습니다. [9] MD 모델에서 pH의 영향은 음으로 하전된 SiO2 표면에 대한 Fe(II) 흡착과 중성 표면에 대한 Fe(III) 흡착을 시뮬레이션하여 포함되었습니다. [10] 동적 강성 행렬을 공식화하는 과정에서 중립 표면의 개념과 함께 Kirchhoff-Love 판 이론이 채택되었습니다. [11] 모드 표면은 3D 대칭 텐서 필드 토폴로지를 구성하는 축퇴 곡선과 중립 표면의 일반화입니다. [12] 나선형 패턴 설계를 최적화하기 위해 특정 피치 크기는 받은 그대로의 튜브가 접힐 때 중립 표면을 따라 단일 접힘의 선 길이를 기반으로 해야 합니다. [13] FGM에는 분기점이 없기 때문에 두 경계 조건이 모두 회전하고 중립 표면이 중간 평면과 일치하지 않을 때마다 클램프 구성만 검사됩니다. [14] 최적의 영역은 미러 중심 및/또는 중립 표면 근처에 있지만 일치하지는 않습니다. [15] 중립면에 수직인 직선의 변형에 대한 개별 비선형 이론이 개발되었습니다. [16] 광범위한 광방출 결과가 얻어졌지만 전하-비중성 표면으로 인한 122의 표면 복잡성은 거의 고려되지 않습니다. [17] 또한, FhSi/O3 시스템의 pHZPC가 Fh/O3 시스템에 비해 낮기 때문에 FhSi 표면에 중성 표면-수산화 종의 생성이 촉진되어 촉매에 관계없이 알칼리성 용액에서 적절한 촉매 성능을 가능하게 했습니다. 주기. [18] 퇴화 곡선과 중립 표면은 3D 대칭 텐서 필드에서 중요한 토폴로지 기능입니다. [19] ·A에 대한 낮은 값은 아데닌의 초기 이온화에 이어 중성 표면에서 상당한 기하학적 재배열이 뒤따르는 것으로 추적할 수 있습니다. [20] McDougall(1989)은 중성 표면이 정확한 지반 흐름 함수를 가지고 있음을 증명했지만 그 형태는 아직 알려지지 않았습니다. [21] 다양한 Cae에 대해 중립면을 고려하여 시뮬레이션을 수행합니다. [22] 시상면에서 시편은 중립면에 하중을 가한 다음 20o의 배굴을 가했습니다. [23] 해양에서 대부분의 혼합이 발생하는 중성 표면은 매우 어려운 물체로 악명이 높습니다. 그것들은 잘 정의된 표면으로 존재하지 않으므로 대략적으로만 가능합니다. [24] 기능화는 나노입자 모양의 유지, 혈장 단백질 흡착의 방해, 작은 유체역학적 크기의 유지 및 거의 전기 중성선 표면의 확립을 초래했습니다. [25] 그 결과 친수성이 가장 좋은 전자중성 표면을 가진 EGCg/PEI 600 공증착막이 섬유폐수 처리와 관련하여 공증착막 사이에서 최적의 분리 성능을 나타내었다. [26] 이 논문은 인장응력의 작용과 동시에 굽힘띠의 중립면의 반경을 결정하는 문제를 다룬다. [27] 공식에서 축방향 변위를 제거하기 위해 중립면의 개념이 채택되었습니다. [28] 유기 분자와 중성 표면의 상호 작용을 시뮬레이션하기 위해 이 방법이 많이 개발되었지만 대전된 표면과의 상호 작용에 관한 정보는 상대적으로 적습니다. [29] 표면층의 극성은 중성 표면의 LEEM 및 MEM 스펙트럼에서 볼 수 있는 것으로 예상되지만 표면이 충전될 때는 훨씬 적습니다. [30]
Physical Neutral Surface 물리적 중립 표면
In order to eliminate the stretching and bending coupling caused by the asymmetrical material variation along the thickness, the problem is formulated relative to the physical neutral surface. [1] The concept of physical neutral surface (PNS) and higher-order shear deformation theory are also included into the formulation. [2] The generalized variation principle is used to induce the governing equations, then the approximate analytical solution of the METE-FG nanobeams based on physical neutral surface is obtained by using a two-step perturbation technique. [3] Equations are derived based on physical neutral surface position. [4] Classical plate theory in conjunction with the physical neutral surface of the FGM plate is utilized to obtain the governing differential equation of motion including the effect of rotary inertia. [5]두께에 따른 비대칭 재료 변화로 인한 신축 및 굽힘 결합을 제거하기 위해 문제는 물리적 중립 표면에 대해 공식화됩니다. [1] 물리적 중립 표면(PNS) 및 고차 전단 변형 이론의 개념도 공식에 포함됩니다. [2] 일반화된 변동 원리를 사용하여 지배 방정식을 유도한 다음 물리적 중립 표면을 기반으로 하는 METE-FG 나노빔의 대략적인 분석 솔루션을 2단계 교란 기술을 사용하여 얻습니다. [3] 방정식은 물리적 중립 표면 위치를 기반으로 파생됩니다. [4] nan [5]
Nearly Neutral Surface
Results: The actively targeted nanohybrids were 229 nm in mean size with a nearly neutral surface charge. [1] After breakdown using a food processor, we characterized the breakdown products using seven different methods and found nanosized polystyrene particles with different shapes and negative or nearly neutral surface charges. [2] Besides, the incremental surface hydrophilicity and smoothness as well as the nearly neutral surface potential endowed the PEI-grafted membrane with robust anti-fouling capacity in the concentration of raw DW. [3] When the composition ratio was set at CA:6 vs DMEAMA:4 (C6D4), the hydrogel showed nearly neutral surface charge and an equivalent reaction ratio of CA vs DMAEMA in the hydrogel. [4]결과: 적극적으로 표적화된 나노하이브리드는 표면 전하가 거의 중성인 평균 크기가 229nm였습니다. [1] 푸드 프로세서를 사용한 분해 후, 우리는 7가지 다른 방법을 사용하여 분해 제품을 특성화하고 다양한 모양과 음의 또는 거의 중성 표면 전하를 갖는 나노 크기의 폴리스티렌 입자를 발견했습니다. [2] 게다가, 증가하는 표면 친수성 및 부드러움 뿐만 아니라 거의 중성에 가까운 표면 전위는 원시 DW 농도에서 PEI-그래프팅된 막에 강력한 방오 능력을 부여했습니다. [3] 조성비가 CA:6 대 DMEAMA:4(C6D4)로 설정되었을 때, 하이드로겔은 거의 중성 표면 전하와 하이드로겔에서 CA 대 DMAEMA의 등가 반응 비율을 보였습니다. [4]
Near Neutral Surface
Nanocrystalline TiO2 photocatalysts with negative and near neutral surface charge were synthesised by adopting a low – temperature sol – gel method. [1] 3) and near neutral surface charge (− 7. [2] 1), and near neutral surface charge (−9mV). [3]음전하 및 중성에 가까운 표면 전하를 갖는 나노결정질 TiO2 광촉매는 저온 졸-겔 방법을 채택하여 합성되었습니다. [1] 3) 중성에 가까운 표면 전하(- 7. [2] 1) 및 거의 중성 표면 전하(-9mV). [3]
Plate Neutral Surface 플레이트 중립 표면
To this purpose, two dimensionless functions closely related to the variability of mechanical properties were introduced and the nonlinear hypothesis of deformation of the straight line normal to the plate neutral surface is assumed. [1] A coupling nonlocal equivalent strain field is introduced on the plate neutral surface to control the softening behavior. [2] The nonlinear hypothesis of deformation of the straight line normal to the plate neutral surface is assumed. [3]이를 위해 기계적 특성의 가변성과 밀접한 관련이 있는 2차원 함수를 도입하고 평판 중립면에 수직인 직선의 변형에 대한 비선형 가설을 가정합니다. [1] 연화 거동을 제어하기 위해 플레이트 중립 표면에 커플링 비국소 등가 변형 장이 도입됩니다. [2] 플레이트 중립면에 수직인 직선의 변형에 대한 비선형 가설이 가정됩니다. [3]
Spectrally Neutral Surface
The assumption of fixed and spectrally neutral surface albedo (0. [1] The assumption of fixed and spectrally neutral surface albedo (0. [2]고정되고 스펙트럼적으로 중성인 표면 알베도의 가정(0. [1] 그만큼 고정 및 스펙트럼 중립 표면 알베도의 가정(0. [2]