Nanofiltration Membranes(나노여과막)란 무엇입니까?
Nanofiltration Membranes 나노여과막 - A new seawater laboratory pilot has been installed in order to evaluate the impact of the seawater quality on the performance of nanofiltration membranes and filters. [1] This study reviews the application of carbon nitride in gas separation membranes, pervaporation membranes, nanofiltration membranes, reverse osmosis membranes, ion exchange membranes and catalytic membranes, along with describing the separation mechanisms. [2] pH shift induced Aqueous phase separation (APS) is a novel and more sustainable water-based approach to create microfiltration, ultrafiltration, and nanofiltration membranes. [3] During operations, only an ultrafiltration membrane, a nanofiltration membrane, and combined ultrafiltration + nanofiltration membranes were put to use. [4] The influence of representative typical pollutants in the zero-discharge process of coal chemical high-salty wastewater on the fouling behavior of nanofiltration membranes was studied. [5] Herein, we propose a new strategy for preparing polyamide (PA) nanofiltration membranes with high solute-solute selectivity via a pre-diffusion interfacial polymerization (PDIP) process. [6] To solve seawater desalination problems and to minimize their effects on productivity and water cost of conventional plants, nanofiltration membranes have recently been employed. [7] It is proposed to use the separation of the concentrates to solutions containing their components depending on the value of their rejection using nanofiltration membranes. [8] To develop such technology composition of spent brine solution from Na-cation exchanger was investigated and conditioning of such solution with use of nanofiltration membranes of different types under different temperatures, pressures and recovery values was tested. [9] The development of nanofiltration membranes with hollow fiber geometry is a relatively young field of research in membrane science with only limited, but quickly growing, availability on a commercial scale. [10] In this study, we evaluate the capability of the XGBoost model to predict micropollutant removal efficiencies of reverse osmosis and nanofiltration membranes. [11] The aim of this research is to investigate the removal behavior of iron and manganese that naturally exist as divalent ions in groundwater by using nanofiltration membranes. [12] The deepening crisis of freshwater resources has been driving the further development of new types of membrane-based desalination technologies represented by nanofiltration membranes. [13] ), acid mine drainage (AMD) treatment methods such as: passive treatment method, sequential neutralization, ion exchange, adsorption process based on low cost adsorbents, adsorption process based on natural zeolits, electrodialysis, filtration with nanofiltration membranes, and reverse osmosis, were evaluated by the following MCDM methods: TOPSIS, VIKOR, MOOSRA, WASPAS, and CoCoSo. [14] Nanofiltration membranes have been used to this purpose since 1987, when FilmTec™ SR90-400 elements were installed in an offshore platform in the North Sea. [15] As a result, GO functionalization will deliver a promising method to construct graphene based nanofiltration membranes with effectual reinforced permeation and dye selectivity. [16] Herein, we have successfully constructed a kind of graphene-based (reduced graphene oxide, rGO) nanofiltration membranes by adopting a plasma-assisted in-situ photocatalytic reduction method. [17] Nanofiltration membranes (NF) are a well-recognized membrane technology used for various applications. [18] In view of the lack of uniform conditions, uniform standards and mixed enterprise standards, this paper studies the self-made rapid membrane testing machine for the determination of pure water permeability and retention of ultrafiltration and nanofiltration membranes, and compares the data with other testing institutions. [19] Nanofiltration membranes show great potential in water treatment and resource recovery for their special separation mechanisms that can separate the small molecules effectively. [20] Sugar-based nanofiltration membranes were successfully developed through a facile interfacial polymerization reaction. [21] Herein, we investigate if polyelectrolyte complexation-induced APS ultrafiltration membranes can be the basis for different types of nanofiltration membranes. [22] For the first and second stages, ultrafiltration and nanofiltration membranes were prepared by phase inversion method using polyethersulfone as polymer, and triethylene glycol and polyethylene glycol as additives. [23] However, it remains a great challenge for current nanofiltration membranes (NFMs) to improve the permeability while maintaining the high rejection for divalent (or multivalent) ions. [24] This study aims to investigate the performance of nanofiltration membranes in the post-treatment of endocrine-disrupting chemicals in textile finishing wastewaters. [25] Nanofiltration membranes are prepared using significantly lower concentrations of acid: 0. [26] ), acid mine drainage (AMD) treatment methods such as: passive treatment method, sequential neutralization, ion exchange, adsorption process based on low cost adsorbents, adsorption process based on natural zeolits, electrodialysis, filtration with nanofiltration membranes, and reverse osmosis, were evaluated by following MCDM methods: TOPSIS, VIKOR, MOOSRA; WASPAS, and CoCoSo. [27] The anchored ultrafine nanoparticles could inhibit the wrinkling of the rGO nanosheet, forming highly stable colloidal solutions for solution-processing fabrication of nanofiltration membranes. [28] The introduction of GO could reduce defects, resulting in formation of smooth and defect-free reverse osmosis/nanofiltration membranes with significantly increased NaCl and antibiotic rejection. [29] In recent years, several molecularly designed framework systems such as metal–organic framework (MOFs), covalent organic framework (COF), two-dimensional (2D) materials such as MXene, typical natural polyphenols like tannic acid, dopamine, and carbon nanomaterials like graphene oxide (GO) have been employed in the fabrication process of nanofiltration membranes for developing the presentation and overcome the drawbacks of conventional ones. [30] This work provided new ideas for the application of nanofiltration membranes and the treatment of lignin lye. [31] ABSTRACT In this study, carbon nanofibers (CNFs) assisted chitosan (Cs) was utilized to surface modification of poly(ether sulphone) (PES) nanofiltration membranes. [32] In this work, for the first time, salts of bivalent and trivalent metals were used as crosslinking agents for nanofiltration membranes based on sodium alginate. [33] This study delivered the proof of concept for the novel process of electrosorptive UF with energy consumption between microfiltration and ultrafiltration but NOM removal rates of nanofiltration membranes. [34] Copper ion removal with nanofiltration membranes has accelerated in recent years. [35] In the first part of this study, the efficiency of two commercial membranes, Reverse Osmosis and Nanofiltration membranes (Dow-FilmTec) is experimentally compared and assessed for nitrate removal by using real brackish water, containing 850-1100 mg/l of total dissolved solids (TDS) and 119-130 mg/l of nitrate. [36] Chitosan functionalized (CoFe2O4−CuO) composite nanoparticles were synthesized and then used in fabrication of PES-based nanofiltration membranes. [37] While polyamide reverse osmosis and nanofiltration membranes have been extensively utilized in water purification and desalination processes, the molecular details governing water and solute permeation in these membranes are not fully understood. [38] Nanofiltration membranes were limited in removing nitrosamines, particularly N-nitrosodimethylamine, which is hydrophilic. [39] A sub-5 nm thick polyamide nanofilm composite membrane establishes the global upper-bound of the permeance–selectivity trade-off for the nanofiltration membranes. [40] A nanofiltration performance with water permeance of 190 LMH/bar and molecular weight cutoff of 269 Da is achieved, surpassing previously reported results obtained using MXene-based nanofiltration membranes. [41]나노여과막 및 필터의 성능에 대한 해수 품질의 영향을 평가하기 위해 새로운 해수 실험실 파일럿이 설치되었습니다. [1] 이 연구는 분리 메커니즘을 설명함과 함께 가스 분리막, 투과증발막, 나노여과막, 역삼투막, 이온 교환막 및 촉매막에 탄소질화물의 적용을 검토합니다. [2] pH 이동 유도 수성 상 분리(APS)는 미세여과, 한외여과 및 나노여과 막을 생성하기 위한 새롭고 보다 지속 가능한 수 기반 접근 방식입니다. [3] 작업시에는 한외여과막, 나노여과막, 한외여과+나노여과 복합막만을 사용하였다. [4] 석탄화학 고염분 폐수의 무배출 공정에서 대표적인 대표적인 오염물질이 나노여과막의 파울링 거동에 미치는 영향을 연구하였다. [5] 여기에서 우리는 PDIP(pre-diffusion interfacial 중합) 공정을 통해 용질-용질 선택성이 높은 폴리아미드(PA) 나노여과막을 제조하기 위한 새로운 전략을 제안합니다. [6] 해수 담수화 문제를 해결하고 기존 플랜트의 생산성 및 물 비용에 대한 영향을 최소화하기 위해 최근 나노여과막이 사용되었습니다. [7] 나노여과막을 사용하여 거부 값에 따라 농축액을 구성 요소를 포함하는 용액으로 분리하는 방법을 제안합니다. [8] 이러한 기술을 개발하기 위해 Na-양이온 교환기에서 나온 폐염수 용액의 구성을 조사하고 다른 온도, 압력 및 회수 값에서 다른 유형의 나노여과막을 사용하여 이러한 용액의 컨디셔닝을 테스트했습니다. [9] 중공 섬유 구조를 갖는 나노여과막의 개발은 상업적 규모에서 이용 가능성이 제한적이지만 빠르게 성장하고 있는 비교적 젊은 막 과학 연구 분야입니다. [10] 이 연구에서 우리는 역삼투 및 나노여과막의 미세 오염 물질 제거 효율을 예측하는 XGBoost 모델의 능력을 평가합니다. [11] 본 연구의 목적은 지하수에 자연적으로 존재하는 2가 이온으로 존재하는 철과 망간의 제거 거동을 나노여과막을 이용하여 조사하는 것이다. [12] 담수 자원의 심화되는 위기는 나노여과막으로 대표되는 새로운 유형의 막 기반 담수화 기술의 추가 개발을 주도하고 있습니다. [13] ), 수동 처리법, 순차 중화, 이온 교환, 저비용 흡착제 기반 흡착 공정, 천연 제올라이트 기반 흡착 공정, 전기투석, 나노여과막 여과, 역삼투압 등의 산성 광산 배수(AMD) 처리 방법, TOPSIS, VIKOR, MOOSRA, WASPAS 및 CoCoSo와 같은 MCDM 방법으로 평가됩니다. [14] Nanofiltration 멤브레인은 FilmTec™ SR90-400 요소가 북해의 연안 플랫폼에 설치된 1987년부터 이러한 목적으로 사용되었습니다. [15] 결과적으로, GO 기능화는 효과적으로 강화된 투과 및 염료 선택성을 갖는 그래핀 기반 나노여과 막을 구성하는 유망한 방법을 제공할 것입니다. [16] 여기에서, 우리는 플라즈마 보조 원위치 광촉매 환원 방법을 채택하여 일종의 그래핀 기반(환원된 산화 그래핀, rGO) 나노여과막을 성공적으로 구축했습니다. [17] 나노여과막(NF)은 다양한 응용 분야에 사용되는 잘 알려진 막 기술입니다. [18] 균일한 조건, 균일한 표준 및 혼합 기업 표준이 없다는 점에서 본 논문은 한외여과 및 나노여과막의 순수 투과도 및 보유율 측정을 위한 자체 제작한 고속 막 시험기를 연구하고 다른 시험 기관과 데이터를 비교합니다. . [19] 나노여과막은 소분자를 효과적으로 분리할 수 있는 특수 분리 메커니즘으로 수처리 및 자원 회수에 큰 잠재력을 보여줍니다. [20] 당 기반 나노여과막은 손쉬운 계면 중합 반응을 통해 성공적으로 개발되었습니다. [21] 여기에서 우리는 고분자 전해질 착화로 인한 APS 한외여과막이 다양한 유형의 나노여과막의 기초가 될 수 있는지 조사합니다. [22] 1단계와 2단계는 고분자로 폴리에테르설폰을, 첨가제로 트리에틸렌글리콜과 폴리에틸렌글리콜을 사용하여 상전이법으로 한외여과 및 나노여과막을 제조하였다. [23] 그러나 2가(또는 다가) 이온에 대한 높은 거부율을 유지하면서 투과성을 개선하는 것은 현재의 나노여과막(NFM)에 대한 큰 도전으로 남아 있습니다. [24] 이 연구는 섬유 마감 폐수에서 내분비 교란 화학 물질의 후처리에서 나노여과막의 성능을 조사하는 것을 목표로 합니다. [25] 나노여과막은 상당히 낮은 농도의 산을 사용하여 제조됩니다: 0. [26] ), 산성 광산 배수(AMD) 처리 방법: 수동 처리 방법, 순차 중화, 이온 교환, 저비용 흡착제 기반 흡착 공정, 천연 제올라이트 기반 흡착 공정, 전기 투석, 나노여과막 여과 및 역삼투압법, 다음 MCDM 방법으로 평가: TOPSIS, VIKOR, MOOSRA; WASPAS, 코코소. [27] 고정된 초미세 나노입자는 rGO 나노시트의 주름을 억제하여 나노여과막의 용액 처리 제조를 위한 매우 안정적인 콜로이드 용액을 형성할 수 있습니다. [28] GO의 도입은 결함을 감소시킬 수 있으며, 결과적으로 NaCl 및 항생제 거부 반응이 현저히 증가하여 매끄럽고 결함이 없는 역삼투/나노여과 막을 형성할 수 있습니다. [29] 최근 몇 년 동안 MOF(metal-organic framework), COF(covalent organic framework), MXene과 같은 2차원(2D) 재료, 탄닌산, 도파민과 같은 전형적인 천연 폴리페놀, 그래핀 옥사이드(GO)는 프리젠테이션을 개발하고 기존 멤브레인의 단점을 극복하기 위해 나노여과 멤브레인의 제조 공정에 사용되었습니다. [30] 이 연구는 나노여과막의 적용과 리그닌 잿물 처리에 대한 새로운 아이디어를 제공했습니다. [31] 초록 이 연구에서 탄소나노섬유(CNFs) 보조 키토산(Cs)은 폴리(에테르 설폰)(PES) 나노여과막의 표면 개질에 활용되었다. [32] 이 연구에서 처음으로 2가 및 3가 금속 염을 알긴산나트륨 기반 나노여과막의 가교제로 사용했습니다. [33] 이 연구는 정밀여과와 한외여과 사이에 에너지 소비를 갖지만 나노여과 멤브레인의 NOM 제거율을 갖는 전기 흡착 UF의 새로운 공정에 대한 개념 증명을 제공했습니다. [34] 나노여과막을 사용한 구리 이온 제거는 최근 몇 년 동안 가속화되었습니다. [35] 이 연구의 첫 번째 부분에서는 850-1100 mg/l의 총 용존 고형물을 포함하는 실제 기수를 사용하여 질산염 제거에 대해 역삼투 및 나노여과막(Dow-FilmTec)의 두 상용 막의 효율성을 실험적으로 비교하고 평가합니다. (TDS) 및 119-130 mg/l의 질산염. [36] 키토산 기능화(CoFe2O4-CuO) 복합 나노입자를 합성한 다음 PES 기반 나노여과막 제조에 사용했습니다. [37] 폴리아미드 역삼투 및 나노여과막이 수질 정화 및 담수화 공정에 광범위하게 사용되었지만 이러한 막에서 물 및 용질 투과를 제어하는 분자 세부 사항은 완전히 이해되지 않았습니다. [38] 나노여과막은 니트로사민, 특히 친수성인 N-니트로소디메틸아민을 제거하는 데 한계가 있었습니다. [39] 두께가 5nm 미만인 폴리아미드 나노필름 복합막은 나노여과막에 대한 투과성-선택성 트레이드오프의 전체 상한을 설정합니다. [40] 190 LMH/bar의 투수성과 269 Da의 분자량 컷오프로 나노여과 성능이 달성되어 이전에 보고된 MXene 기반 나노여과 막을 사용하여 얻은 결과를 능가합니다. [41]
thin film composite 박막 합성물
Pore constructing in polyamide thin film composite (TFC) membranes through the mixed matrix strategy is of great interest to the production of nanofiltration membranes with high liquid permeance, however still facing challenges in fine control of filler distribution and filler-polymer interfacial microstructure. [1] In this work, a facile synthesis of new polyamide thin-film composite nanofiltration membranes (NF-TFC) for water purification was described. [2] A new method for the preparation of chemically robust thin-film composite hollow-fiber (TFC-HF) nanofiltration membranes through a dip-coating process is reported. [3] A piperazine derivative, N-aminoethyl piperazine (AEP) was utilized as the amine monomer to react with trimesoyl chloride (TMC) and to fabricate thin-film composite nanofiltration membranes via interfacial polymerization. [4] Nanomaterials based on metallic, carbonaceous, polymeric, and magnetic nanoadsorbents are discussed in detail in this chapter, along with nanofiltration membranes, thin-film composite membranes, fabricated membranes, nanocomposite membranes, polymeric nanocomposite membranes, and enzyme incorporated nanotechnology-based processes. [5] Amphiphilic poly(arylene ether sulfone) (PAES) multiblock copolymers with quaternary ammonium groups were evaluated as tunable, size-selective barrier material in thin-film composite (TFC) nanofiltration membranes. [6] Three novel thin-film composite (TFC) nanofiltration membranes are prepared using an ultrafiltration membrane (UFM) of organic polymer resin polyacrylonitrile followed by a mineralization process. [7] Modern synthesis methods like interfacial polymerization for obtaining thin-film composite nanofiltration membranes are also presented. [8]혼합 매트릭스 전략을 통한 폴리아미드 박막 복합재(TFC) 멤브레인의 기공 구성은 높은 액체 투과성을 가진 나노여과 멤브레인의 생산에 큰 관심을 갖지만 필러 분포 및 필러-폴리머 계면 미세 구조의 미세 제어에 여전히 도전 과제에 직면해 있습니다. [1] 이 연구에서는 정수를 위한 새로운 폴리아미드 박막 복합 나노여과막(NF-TFC)의 손쉬운 합성에 대해 설명했습니다. [2] nan [3] 피페라진 유도체인 N-아미노에틸 피페라진(AEP)을 아민 단량체로 사용하여 트리메소일 클로라이드(TMC)와 반응하고 계면 중합을 통해 박막 복합 나노여과막을 제조하였다. [4] nan [5] nan [6] nan [7] nan [8]
thin film nanocomposite 박막 나노복합체
ODA-h-NCs were then incorporated into poly(piperazine-amide) (PA) active layer to fabricate thin-film nanocomposite (TFN) nanofiltration membranes. [1] The synthesized N-MOFs have been used to prepare stable and uniform thin film nanocomposite nanofiltration membranes, suitable for desalination of brackish water with excellent flux (31. [2] The thin film nanocomposite (TFN) nanofiltration membranes were constructed by interfacial polymerization of TMC and PIP using different loading of isophthalic acid/aluminum nitrate (0. [3] As a result, thin-film nanocomposite (TFN) nanofiltration membranes were obtained. [4]그런 다음 ODA-h-NC를 폴리(피페라진-아미드)(PA) 활성층에 통합하여 박막 나노복합체(TFN) 나노여과막을 제작했습니다. [1] 합성된 N-MOF는 플럭스가 우수한 기수의 담수화에 적합한 안정적이고 균일한 박막 나노복합 나노여과막을 제조하는 데 사용되었습니다(31. [2] nan [3] nan [4]
molecular weight cut 분자량 컷
The extracts were concentrated using ultrafiltration and nanofiltration membranes with nominal molecular weight cut-off ranging from 180 to 4000 g mol−1. [1] Herein, an ultrathin graphene oxide (GO) membrane with a permeability of 1562 mL h-1 mmHg-1 m-2, two orders of magnitude higher than the existing nanofiltration membranes, and a tight molecular weight cut-off is presented. [2] Obtained membranes have an asymmetric structure and function as nanofiltration membranes with on average 1 L m-2 h-1 bar-1 pure water permeance and <400 Da molecular weight cut-off (MWCO); except for the 1. [3]추출물은 180~4000g mol-1 범위의 공칭 분자량 컷오프를 갖는 한외여과 및 나노여과 막을 사용하여 농축되었습니다. [1] 여기에서는 투과도가 1562 mL h-1 mmHg-1 m-2인 초박형 그래핀 옥사이드(GO) 멤브레인으로 기존 나노여과 멤브레인보다 2배 이상 높으며 엄격한 분자량 컷오프를 제공합니다. [2] nan [3]
Loose Nanofiltration Membranes 느슨한 나노여과막
Loose nanofiltration membranes with a remarkable water permeability are highly promising for the fractionation of dyes and salts in the treatment of textile wastewater. [1] Herein, novel loose nanofiltration membranes were fabricated by the assembly of polyethyleneimine (PEI) and phosphorylated PEI (PEI-PO3Na) coupled with glutaraldehyde crosslinking. [2] The resultant Zn-TCPP/TFN loose nanofiltration membranes with excellent self-cleaning ability can not only provide a potential solution for the removal of organic pollutants, but also offer new inspiration for fabricating high performance self-cleaning loose nanofiltration membranes through a mature and facile interfacial polymerization method. [3] The complete fractionating synthetic and real dye/salt mixtures through loose nanofiltration membranes are of great significance for the textile wastewater recycling and reuse. [4] Loose nanofiltration membranes (LNMs) have attracted increased attention in the field of sustainable management of the highly-saline textile wastewater. [5] In this work, three types of hollow fiber loose nanofiltration membranes (LNFs) with different compactness in an “outside-in” mode were prepared via “chemical crosslinking and metal ion coordination”. [6] Low-pressure loose nanofiltration membranes were facilely fabricated by intercalating CNTs into graphene oxide (GO) laminates supported by cellulose acetate (CA) ultrafiltration substrates. [7] This work is expected to give a useful guideline for developing loose nanofiltration membranes with favorable photocatalytic and antimicrobial properties, offering an appropriate solution of using self-cleaning membranes for the treatment of dye wastewater. [8] Newly developed loose nanofiltration membranes showed a superior removal performance of synthetic dyes based on their size and charge, such as congo red (2. [9] Loose nanofiltration membranes with excellent dye rejection and high inorganic salt transmission are promising for dye/salt separation. [10]뛰어난 투수성을 가진 느슨한 나노여과막은 섬유 폐수 처리에서 염료와 염의 분별에 매우 유망합니다. [1] 여기서, 새로운 느슨한 나노여과막은 글루타르알데히드 가교결합과 결합된 폴리에틸렌이민(PEI)과 인산화된 PEI(PEI-PO3Na)의 조립에 의해 제조되었다. [2] nan [3] nan [4] nan [5] nan [6] nan [7] nan [8] nan [9] nan [10]
Solvent Nanofiltration Membranes 용매 나노여과막
The reusability of the catalyst was evaluated by organic solvent nanofiltration membranes. [1] However, the fabrication of organic solvent nanofiltration membranes with stable separation performance is still a challenge. [2] More importantly, these membranes provided smart, selective separation performance for various binary dye mixtures with separation efficiencies higher than 95%, achieving precise separation of small organic molecules at a transport rate which is over two orders of magnitude higher than that of reported organic solvent nanofiltration membranes. [3] Graphene-based materials have been used for fabricating organic solvent nanofiltration membranes due to their excellent mechanical properties and chemical stability in organic solvents. [4] In this work, the performance of composite polydimethylsiloxane/polyacrylonitrile (PDMS/PAN) organic solvent nanofiltration membranes in the recovery of these solvents from their binary mixtures with canola oil is investigated. [5] In this study, thin Kevlar nanofibrous organic solvent nanofiltration membranes were fabricated through a facile and green thermal treatment by using greener solvent. [6] The results of this work demonstrate three crucial findings relevant to organic solvent nanofiltration membranes and other applications: 1. [7]촉매의 재사용성은 유기용매 나노여과막으로 평가하였다. [1] 그러나 안정적인 분리 성능을 가진 유기용매 나노여과막의 제조는 여전히 어려운 과제입니다. [2] nan [3] nan [4] nan [5] nan [6] nan [7]
Composite Nanofiltration Membranes 복합 나노여과막
In this work, a facile synthesis of new polyamide thin-film composite nanofiltration membranes (NF-TFC) for water purification was described. [1] A piperazine derivative, N-aminoethyl piperazine (AEP) was utilized as the amine monomer to react with trimesoyl chloride (TMC) and to fabricate thin-film composite nanofiltration membranes via interfacial polymerization. [2] The resulting composite nanofiltration membranes have been used to explore the possibility of removing cations (K+, Na+, Ca2+, Mg2+) and anions (F−, Cl−, NO3–, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{SO}}_{{\text{4}}}^{{{\text{2}} - }}$$\end{document}) from tap water. [3] Modern synthesis methods like interfacial polymerization for obtaining thin-film composite nanofiltration membranes are also presented. [4] This paper discusses the effect of the chemical structure of sulfonated poly(aryl ether sulfone) on the performance of composite nanofiltration membranes. [5] Samples of original and working porous composite nanofiltration membranes were investigated by xray scattering, thermal analysis, and study of the specific flow rate and retention coefficient. [6]이 연구에서는 정수를 위한 새로운 폴리아미드 박막 복합 나노여과막(NF-TFC)의 손쉬운 합성에 대해 설명했습니다. [1] 피페라진 유도체인 N-아미노에틸 피페라진(AEP)을 아민 단량체로 사용하여 트리메소일 클로라이드(TMC)와 반응하고 계면 중합을 통해 박막 복합 나노여과막을 제조하였다. [2] nan [3] nan [4] nan [5] nan [6]
Commercial Nanofiltration Membranes 상업용 나노여과막
In this regard, three commercial nanofiltration membranes (NP010, NP030, and NF90) were used for the experiments carried out at 6-12 bar operating pressure regarding the response surface methodology. [1] To achieve this goal, two commercial nanofiltration membranes were used to treat medium-high strength wastewater. [2] The effect of feed pH, pressure, metal concentration, and oxidation of metal on the rejection of heavy metal ions using three commercial nanofiltration membranes (NF, NF90, and NF270) were explored. [3] However, commercial nanofiltration membranes can be insufficiently selective since some produced organic acids have similar molecular weights. [4] In this study, commercial nanofiltration membranes (Toray, NF 270, Desal 5 L) were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, optical profilometry, contact angle, mechanical strength and zeta potential measurements. [5] These are much higher than those of the related TMC and commercial nanofiltration membranes. [6]이와 관련하여 3개의 상용 나노여과막(NP010, NP030 및 NF90)이 반응 표면 방법론과 관련하여 6-12bar 작동 압력에서 수행된 실험에 사용되었습니다. [1] 이 목표를 달성하기 위해 두 개의 상업용 나노여과막을 사용하여 중강도 폐수를 처리했습니다. [2] nan [3] nan [4] nan [5] nan [6]
Go Nanofiltration Membranes 나노여과막으로 이동
Thus, this study provides a promising method for preparing laminated GO nanofiltration membranes for dye wastewater treatment. [1] Our simulation results may help to improve the design of GO nanofiltration membranes for water treatment. [2] These findings demonstrate a simple and practical method to prepare GO nanofiltration membranes with a two-dimensional layered structure to achieve the purification treatment of textile wastewater. [3]따라서, 본 연구는 염료 폐수 처리용 적층 GO 나노여과막 제조를 위한 유망한 방법을 제공한다. [1] 시뮬레이션 결과는 수처리용 GO 나노여과막 설계를 개선하는 데 도움이 될 수 있습니다. [2] nan [3]
Polymer Nanofiltration Membranes 고분자 나노여과막
However, polymer nanofiltration membranes suffer from low lithium selectivity and are hindered by complicated preparation and miniaturized scales. [1] In this study, we investigated the resistance of three commercial polymer nanofiltration membranes (NP10, NF90 and NF270) in contact with ozone (10 ppm for 1 h) at pH 3 and 7 to assess the influence of the ozone to hydroxyl radical concentrations balance. [2] As such, the water permeability and solute selectivity of [email protected] are one magnitude improved, leading to a record-high performance among all polymer nanofiltration membranes. [3]그러나 고분자 나노여과막은 리튬 선택도가 낮고 제조과정이 복잡하고 스케일이 작아야 하는 문제점이 있다. [1] 이 연구에서 우리는 하이드록실 라디칼 농도 균형에 대한 오존의 영향을 평가하기 위해 pH 3 및 7에서 오존(1시간 동안 10ppm)과 접촉하는 3개의 상용 고분자 나노여과막(NP10, NF90 및 NF270)의 저항을 조사했습니다. [2] nan [3]
Ceramic Nanofiltration Membranes
Herein, composite ceramic nanofiltration membranes were prepared by the codeposition of polydopamine and polyethyleneimine (PDA/PEI), with subsequent cross-linking by glutaraldehyde (GA). [1] This is the first paper reporting the phosphate retention of ceramic nanofiltration membranes. [2]여기에서, 복합 세라믹 나노여과막은 폴리도파민과 폴리에틸렌이민(PDA/PEI)의 공증착과 글루타르알데히드(GA)에 의한 가교에 의해 제조되었다. [1] nan [2]
Advanced Nanofiltration Membranes
Graphene oxide (GO) has been considered as a promising material to develop advanced nanofiltration membranes to resolve the current worldwide water scarcity issue, benefiting from its extraordinary physicochemical properties. [1] Graphene oxide (GO) has been considered as a promising material to develop advanced nanofiltration membranes benefiting from its extraordinary physicochemical properties. [2]산화 그래핀(GO)은 탁월한 물리화학적 특성으로 인해 현재 전 세계적으로 물 부족 문제를 해결하기 위해 고급 나노여과막을 개발할 유망한 재료로 간주되어 왔습니다. [1] nan [2]
Fmy Nanofiltration Membranes Fmy 나노여과막
The influence of hydrothermal pretreatment of organosolv HH from beechwood pulping on the separation of xylose by four nanofiltration membranes was investigated. [1] Four nanofiltration membranes were tested: NF (polypiperazine amide), NF90 (fully aromatic polyamide), and NP010 and NP030 (polyethersulfones). [2]너도밤나무 펄프에서 유기용매 HH의 열수 전처리가 4개의 나노여과막에 의한 자일로스의 분리에 미치는 영향을 조사했습니다. [1] NF(폴리피페라진 아미드), NF90(완전 방향족 폴리아미드), NP010 및 NP030(폴리에테르설폰)의 4가지 나노여과막을 테스트했습니다. [2]
Multilayer Nanofiltration Membranes 다층 나노여과막
Polyelectrolyte multilayer nanofiltration membranes (PEMMs) achieve tailor-made rejection and selectivity of ions for water treatment applications through a layer-by-layer coating procedure, in which a charged support membrane surface is sequentially contacted with positively and negatively charged polyelectrolytes. [1] We herein report a novel approach based on electrochemical impedance spectroscopy (EIS) for in-situ monitoring of the adsorption kinetics in preparing polyelectrolyte multilayer nanofiltration membranes using layer-by-layer (LbL) deposition. [2]고분자 전해질 다층 나노여과막(PEMM)은 하전된 지지막 표면이 양전하 및 음전하를 띤 고분자 전해질과 순차적으로 접촉하는 층별 코팅 절차를 통해 수처리 응용 분야에 대한 맞춤형 거부 및 이온 선택성을 달성합니다. [1] 우리는 여기에서 층별(LbL) 증착을 사용하여 고분자 전해질 다층 나노여과 막을 제조할 때 흡착 동역학의 현장 모니터링을 위한 전기화학적 임피던스 분광법(EIS)을 기반으로 하는 새로운 접근 방식을 보고합니다. [2]
Fiber Nanofiltration Membranes 섬유 나노여과막
Four types of hollow fiber nanofiltration membranes were fabricated and tested during pilot scale treatment of surface water taken from Istanbul Omerli Lake Reservoir. [1] The composite hollow fiber nanofiltration membranes suffer from tedious fabrication procedures, impeding the large volume fabrication and application. [2]4가지 유형의 중공사 나노여과막이 Istanbul Omerli Lake Reservoir에서 채취한 지표수의 파일럿 규모 처리 중에 제작 및 테스트되었습니다. [1] 복합 중공사 나노여과막은 지루한 제조 절차로 인해 대량 제조 및 적용을 방해합니다. [2]
Generation Nanofiltration Membranes 생성 나노여과막
Our technique for tuning the membrane microstructure opens opportunities for developing next-generation nanofiltration membranes. [1] Nanostructured materials with precisely defined and water-bicontinuous 1-nm-scale pores are highly sought after as advanced materials for next-generation nanofiltration membranes. [2]멤브레인 미세 구조를 조정하는 우리의 기술은 차세대 나노여과 멤브레인을 개발할 수 있는 기회를 제공합니다. [1] 정밀하게 정의되고 연속적인 1nm 규모의 기공을 가진 나노구조 재료는 차세대 나노여과막의 첨단 재료로 높은 수요를 얻고 있습니다. [2]
Two Nanofiltration Membranes 2개의 나노여과막
In the present work, we carried out a case study evaluating the performance of two nanofiltration membranes in the removal of Atenolol (ATN)—a pharmaceutical compound widely used for the treatment of arterial hypertension—under different conditions such as operating pressure, ATN concentration, and solution pH. [1] In this study, lubricating oil dewaxing solvent recovery by two nanofiltration membranes was studied. [2]현재 작업에서 우리는 작동 압력, ATN 농도, 및 용액 pH. [1] 본 연구에서는 두 개의 나노여과막에 의한 윤활유 탈납 용매 회수를 연구하였다. [2]
Film Nanofiltration Membranes 필름 나노여과막
Polyurethane nanofibers recognized to perform as a sub-layer were employed herein as a medial-layer of high porosity in the fabrication of a novel class of thin-film nanofiltration membranes. [1] Surface modification of thin-film nanofiltration membranes was carried out to produce high water permeable NF membranes by Air-Ar plasma treatment. [2]하위층으로 작용하는 것으로 인식된 폴리우레탄 나노섬유는 여기에서 새로운 종류의 박막 나노여과막의 제조에서 높은 다공성의 중간층으로 사용되었습니다. [1] Air-Ar 플라즈마 처리에 의해 높은 투수성 NF 막을 생산하기 위해 박막 나노여과막의 표면 개질을 수행하였다. [2]
Fabricated Nanofiltration Membranes 제조된 나노여과막
Here, we fabricated nanofiltration membranes (NFMs) by interfacial polymerization on polyvinylidene fluoride (PVDF) substrates modified with hierarchical flower-like molybdenum disulfide (HF–MoS2). [1] By synergistically combining the PIL-induced hydrophobic confinement effect and supramolecular interactions, the as-fabricated nanofiltration membranes carry interface transport nanochannels between GO and PIL, reaching a high water permeability of 96. [2]여기에서 우리는 계층적 꽃과 같은 이황화 몰리브덴(HF-MoS2)으로 변형된 폴리비닐리덴 플루오라이드(PVDF) 기판에서 계면 중합에 의해 나노여과막(NFM)을 제작했습니다. [1] PIL로 유도된 소수성 구속 효과와 초분자 상호작용을 시너지 효과로 결합함으로써 제조된 나노여과막은 GO와 PIL 사이의 계면 수송 나노채널을 운반하여 96의 높은 투수율에 도달합니다. [2]
nanofiltration membranes vium 나노여과막 Vium
Cellulose acetate (CA) as polymer, glycerol derivatives (namely triacetin, diacetin, monoacetin or glycerol-formal) as solvents and 2-methyltetrahydrofuran (2-MeTHF) as co-solvent were selected as bio-based ingredients for the preparation of full-bio-based nanofiltration membranes via non-solvent induced phase separation (NIPS). [1] A piperazine derivative, N-aminoethyl piperazine (AEP) was utilized as the amine monomer to react with trimesoyl chloride (TMC) and to fabricate thin-film composite nanofiltration membranes via interfacial polymerization. [2] The successful synthesis of poly(aryl cyanurate) nanofiltration membranes via the interfacial polymerization reaction between cyanuric chloride and 1,1,1-tris(4-hydroxyphenyl)ethane (TPE), atop a polyethersulfone ultrafiltration support, is demonstrated. [3]고분자로 셀룰로오스 아세테이트(CA), 용매로 글리세롤 유도체(즉, 트리아세틴, 디아세틴, 모노아세틴 또는 글리세롤-포르말) 및 공용매로 2-메틸테트라히드로푸란(2-MeTHF)을 완전체 제조를 위한 바이오 기반 성분으로 선택했습니다. 비용매 유도 상분리(NIPS)를 통한 바이오 기반 나노여과막. [1] 피페라진 유도체인 N-아미노에틸 피페라진(AEP)을 아민 단량체로 사용하여 트리메소일 클로라이드(TMC)와 반응하고 계면 중합을 통해 박막 복합 나노여과막을 제조하였다. [2] 폴리에테르설폰 한외여과 지지체 위에 염화시아누르와 1,1,1-트리스(4-히드록시페닐)에탄(TPE) 사이의 계면 중합 반응을 통한 폴리(아릴 시아누레이트) 나노여과막의 성공적인 합성이 입증되었습니다. [3]
nanofiltration membranes suffer 나노여과막은 어려움을 겪습니다.
However, polymer nanofiltration membranes suffer from low lithium selectivity and are hindered by complicated preparation and miniaturized scales. [1] The composite hollow fiber nanofiltration membranes suffer from tedious fabrication procedures, impeding the large volume fabrication and application. [2]그러나 고분자 나노여과막은 리튬 선택도가 낮고 제조과정이 복잡하고 스케일이 작아야 하는 문제점이 있다. [1] 복합 중공사 나노여과막은 지루한 제조 절차로 인해 대량 제조 및 적용을 방해합니다. [2]