Mxene Membrane(멕센 멤브레인)란 무엇입니까?
Mxene Membrane 멕센 멤브레인 - These results demonstrated that coating polyelectrolyte (PEI) successfully tuned the surface charge and enhanced the hydrophilicity without scarifying the laminar structure of MXene membrane. [1] Based on operando XRD and ex-situ XPS results, we find that the Ti-OH bonds present on the surface of MXene membrane can effectively trigger the LiPS transformation. [2] These findings can be useful in enhancing the structural properties of MXene membranes for water purification applications. [3] Herein, by using an "oxidation-etching" method, MXene membranes are presented with controllable in-plane pores as interlayer to regulate Li ion transportation and LiPS immobilization. [4] Long-term use of the MXene membrane for treating 10 mg-NO3-N L-1 in water was found to have a high faradic efficiency of 72. [5] Two-dimensional (2D) MXene membranes with high thermal and mechanical stability have shown great promise for water purification and desalination given their low energy consumption and high efficiency. [6] Herein, we introduce a facile and practical methodology involving the fabrication of self-interlocked poly (vinyl alcohol) (PVA) and conductive Ti3C2Tx MXene networks, then combining them to construct a nanostructure-engineered PVA/MXene membrane. [7] However, the applications of MXene membranes are limited by their low water permeability owing to narrow channels and high tortuosity. [8] Flux of the prepared PES-Ni@MXene membrane was 2. [9] Therefore, we designed and prepared hydroxyl-rich titanium carbide MXene materials and filtered them onto a commercial polyvinylidene fluoride substrate membrane to obtain a cracked-earth-like MXene membrane with abundant hydroxyl groups and excellent underwater wettability. [10] We report on the specific properties of O- and OH-terminated Ti3C2Tx nanosheets contributing the permeance of MXene membranes with sorption type selectivity. [11] The interlayer spacing of MXene membrane was shrank from 3. [12] Herein, the Ti3C2Tx (T represents O, OH, and/or F) MXene membrane was obtained by depositing Ti3C2Tx MXene 2D nanosheets carbides onto porous polyvinylidene fluoride (PVDF) membranes by vacuum filtration. [13] MXene membranes should be easier and less expensive to make at large scales (ACS Nano 2019, DOI: 10. [14]이러한 결과는 코팅된 고분자 전해질(PEI)이 MXene 막의 층 구조를 손상시키지 않으면서 표면 전하를 성공적으로 조정하고 친수성을 향상시켰음을 입증했습니다. [1] Operando XRD 및 ex-situ XPS 결과를 기반으로 MXene 멤브레인 표면에 존재하는 Ti-OH 결합이 LiPS 변환을 효과적으로 유발할 수 있음을 발견했습니다. [2] 이러한 발견은 정수 응용 분야를 위한 MXene 멤브레인의 구조적 특성을 향상시키는 데 유용할 수 있습니다. [3] 여기에서 "산화 에칭" 방법을 사용하여 MXene 멤브레인은 Li 이온 수송 및 LiPS 고정화를 조절하기 위해 중간층으로 제어 가능한 평면 내 기공을 제공합니다. [4] 물에서 10 mg-NO3-N L-1을 처리하기 위해 MXene 멤브레인을 장기간 사용하면 패러딕 효율이 72로 높은 것으로 나타났습니다. [5] 높은 열 및 기계적 안정성을 가진 2차원(2D) MXene 멤브레인은 낮은 에너지 소비와 높은 효율성을 감안할 때 정수 및 담수화에 대한 큰 가능성을 보여주었습니다. [6] 여기에서는 자체 연동된 폴리(비닐 알코올)(PVA) 및 전도성 Ti3C2Tx MXene 네트워크의 제조를 포함하는 쉽고 실용적인 방법론을 소개하고 이를 결합하여 나노구조로 설계된 PVA/MXene 멤브레인을 구성합니다. [7] 그러나 MXene 멤브레인의 적용은 좁은 채널과 높은 비틀림으로 인해 낮은 투수성으로 인해 제한됩니다. [8] 제조된 PES-Ni@MXene 멤브레인의 Flux는 2였다. [9] 따라서 우리는 수산기가 풍부한 탄화티타늄 MXene 재료를 설계 및 준비하고 상업용 폴리불화비닐리덴 기재 멤브레인에 여과하여 수산기가 풍부하고 수중 습윤성이 우수한 균열된 토류 MXene 멤브레인을 얻었습니다. [10] 우리는 흡착 유형 선택성을 가진 MXene 멤브레인의 투과성에 기여하는 O 및 OH 말단 Ti3C2Tx 나노시트의 특정 특성에 대해 보고합니다. [11] MXene 멤브레인의 층간 간격은 3에서 축소되었습니다. [12] 여기서 Ti3C2Tx(T는 O, OH 및/또는 F를 나타냄) MXene 멤브레인은 Ti3C2Tx MXene 2D 나노시트 카바이드를 진공 여과에 의해 다공성 폴리비닐리덴 플루오라이드(PVDF) 멤브레인에 증착하여 얻었다. [13] MXene 멤브레인은 대규모로 만들기가 더 쉽고 저렴해야 합니다(ACS Nano 2019, DOI: 10. [14]
2d Mxene Membrane 2d 멕센 멤브레인
In the current study, we enhance the selectivity of the 2D MXene membrane by coating the membrane surface with tannic acid (TA)-metal complex layer. [1] Herein, 2D MXene membranes with a large area of up to 575 cm2 are prepared by facile electrophoretic deposition (EPD) within 10 min. [2] This work demonstrates that the self-crosslinking strategy is an efficient approach for improving the size-sieving properties of 2D MXene membranes. [3] The engineering as well as the design of atomically thin 2D MXene membranes developed over the past decade have played a major role in high-throughput separation areas. [4]현재 연구에서 우리는 막 표면을 탄닌산(TA)-금속 착물 층으로 코팅하여 2D MXene 막의 선택성을 향상시킵니다. [1] 여기에서, 최대 575 cm2의 넓은 면적을 갖는 2D MXene 멤브레인은 10분 이내에 용이한 전기영동 증착(EPD)에 의해 제조됩니다. [2] 이 작업은 자가 가교 전략이 2D MXene 멤브레인의 크기 체질 특성을 개선하기 위한 효율적인 접근 방식임을 보여줍니다. [3] 지난 10년 동안 개발된 원자적으로 얇은 2D MXene 멤브레인의 설계와 엔지니어링은 처리량이 많은 분리 영역에서 중요한 역할을 했습니다. [4]