Mxene Composite(Mxene 합성물)란 무엇입니까?
Mxene Composite Mxene 합성물 - SnOSnO<inf>2</inf>/MXene 복합 재료는 SnO<inf>2</inf> 나노시트가 MXene 플레이크의 표면에서 고르게 성장하는 손쉬운 열수 방법으로 합성되었습니다. [1] 여기에서, ZnO/MXene 복합물은 손쉬운 2단계 화학 반응 방법으로 제작되었으며 그 구조와 광촉매 성능을 체계적으로 조사했습니다. [2] 구조화된 나노 크기의 SnO2/MXene 복합 재료는 손쉬운 열수 경로를 통해 달성되었으며 나트륨 이온 배터리(SIB)의 양극 재료로 적용되었습니다. [3] 예상대로 초박형 정합 두께와 우수한 흡수 능력을 가진 EM 파장 흡수체가 MXene 복합 재료에서 구현됩니다. [4] 418 W m−1 K−1은 5 wt의 PI/MXene 복합 재료에 대해 달성됩니다. [5] 풍부한 산소 함유 작용기를 가진 MXene(Ti3C2Tx)은 볼 밀링 공정에서 HC 입자와 반응하여 Ti-O-C 공유 가교결합된 HC-MXene 복합체를 형성하며, 여기서 MXene 나노시트의 가장자리는 제자리에서 공기에 의해 산화되어 TiO2 나노로드를 형성하여 규칙적인 1D/2D MXene/TiO2 이종 접합 구조를 형성합니다. [6] 초고유전율은 침투로 인해 폴리머/MXene 복합물에서 얻어집니다. [7] 상변화 물질/MXene 복합 재료를 기반으로 하는 열 에너지는 에너지 위기를 완화하고 에너지 수요를 충족할 수 있습니다. [8] 이 작업에서 우리는 MXene 복합 재료에서 분리된 구조의 다중 인터페이스가 전자기파의 흡수를 향상시킨다는 것을 보여줍니다. [9] 또한, SnS2 NSs/MXene 복합 재료와 K+의 다단계 합금 반응 메커니즘은 ex situ X선 회절 측정에 의해 밝혀졌습니다. [10] 여기에서 우리는 MXene 합성물에서 무해한 첨가제로서 천연 공급원인 타르타르산의 놀라운 이점을 발견했습니다. [11] PVA/MXene 복합 기반 습도 센서는 MoSe 2 PENG에 의해 자체 전원이 공급되었으며 우수한 특성을 나타냈습니다. [12] 합성된 Pt/e-MXene 합성물은 MOR용 촉매로 적용될 때 전기촉매 활성 및 내구성 측면에서 Pt/e-MXene 및 JM Pt/C 촉매에 비해 현저히 향상된 성능을 나타냅니다. [13] 이 연구는 에너지 저장 장치에서 이중 전이 금속(Mo 및 Ti)과 함께 MXene 복합 재료를 사용하기 위한 새로운 경로를 제안합니다. [14] 이 연구에서 MnOx/MXene 복합재는 MXene의 화학적 활성을 사용하여 산화망간과의 계면 상호작용을 유발하는 모델 시스템으로 사용되었습니다. [15] 이 방법은 대규모 배치로 다른 금속 산화물 및 MXene 복합 재료의 제조로 확장될 가능성이 있습니다. [16] 이 연구에서는 2차원 MXene을 기질로 사용하여 Prussian blue analogues@MXene 합성물(PBA@MXene)을 제작하여 퍼옥시모노설페이트 활성화에 기반한 쿠마린(COU)의 산화적 분해를 위한 불균일 촉매로 활용했습니다. [17] 그 결과, 나노-TiO2가 구겨진 MXene의 표면에 분산되고 모든 원소(Ti, O, C, N)가 균일하게 분포된 구겨진 NC-TiO2/MXene 복합체가 제조된다. [18] 습식 함침 방법을 통해 MoS2/MXene 복합재(NiMoS2/MXene)에 통합된 니켈은 메탄올 전기 산화를 위한 양극 전극 재료로 사용됩니다. [19] 여기에서 우리는 MXene 복합 재료의 무해한 첨가제로서 천연 공급원인 타르타르산의 이점을 보고합니다. [20] 이 연구에서는 면 섬유에서 성장한 PPy(Polypyrrole) 및 MXene 합성물을 고용량 전극으로 제안합니다. [21] 이 방법은 다양한 응용을 위한 TMO 나노 입자의 분산성 향상을 위한 다른 전이 금속 산화물(TMO) 및 MXene 복합 재료를 제조하는 데 일반화될 수 있습니다. [22] 이 논문에서 새로운 MnO2/MXene 합성물은 정전기 자가 조립에 의해 준비됩니다. [23] NiCo2S4/MXene 복합재의 우수한 전기화학적 성능은 NiCo2S4와 MXene 나노시트 사이의 상승적 결합 효과에 기인하며, 이는 충전/방전 과정에서 전하 이동 속도를 향상시킬 수 있습니다. [24] 몰비가 다른 TiS2/MXene 복합재료는 1단계 열수법으로 성공적으로 제조되었으며, 특성화를 통해 최적 비율을 확인하였다. [25] 새롭고 전도성이 높은 dodecaborate/MXene 합성물이 고성능 슈퍼커패시터용으로 설계되었습니다. [26] 우리는 먼저 양으로 하전된 WO3 나노로드(WNR)와 음으로 하전된 전이 금속 탄화물(MXene) 사이의 긴밀한 정전기 인력에 의해 WO3/MXene 복합물을 준비하는 손쉬운 전략을 보고합니다. [27] 지금까지 폴리머/MXene 복합 재료의 적하 방지 성능은 거의 보고되지 않았습니다. [28]
Ti3c2tx Mxene Composite Ti3c2tx Mxene 합성물
Results demonstrated that the frequency dependence of electromagnetic parameters for the FeNi/Ti3C2Tx MXene composites could be easily regulated by simply changing the content of FeNi nanoparticles in favor of improved magnetic loss and optimized impedance matching. [1] The sulfur content in S/Ti3C2Tx MXene composites is an important factor affecting the cathodes' electrochemical performance. [2] A simple noncovalent chemical approach and hydrothermal method were used for effectively riveting Co3O4 nanocrystals to branched polyethylenimine (PEI) functionalized Ti3C2Tx MXene sheets to fabricate Co3O4@PEI/Ti3C2Tx MXene composites. [3] Herein, we develop a novel roll-to-roll layer-by-layer assembly strategy to construct bark-shaped carbon nanotube (CNT)/Ti3C2Tx MXene composite film on the fiber surface. [4] We synthesize a series of cobalt species combined with carbon nanotubes loaded onto graphene-like titanium carbide (CoOx-N C/TiO2C), which are derived from bimetallic CoZn-based zeolitic imidazolite framework and Ti3C2Tx MXene composite (CoZn-ZIF/Ti3C2Tx). [5] The LVO/Ti3C2Tx MXene composite exhibited remarkable electrochemical performance in terms of rate capability and long-term cycle stability in comparison with bare LVO and commercial graphite anodes. [6] At high loading (and high conductivity), Ti3C2Tx MXene composites do not heat under RF fields due to reflection of electromagnetic waves, whereas composites with low conductivity do not heat due to the lack of an electrical percolating network. [7] In this paper, the NiFe2O4-decorated Ti3C2Tx MXene composites were synthesized by the in-situ chemical co-precipitation method. [8] Flexible and stretchable hybrid 3D graphene/Ti3C2Tx MXene composite thin film was fabricated using chemical vapor deposition (CVD) and selective etching method. [9]결과는 FeNi/Ti3C2Tx MXene 복합 재료에 대한 전자기 매개변수의 주파수 의존성이 개선된 자기 손실 및 최적화된 임피던스 매칭을 위해 FeNi 나노입자의 함량을 단순히 변경함으로써 쉽게 조절할 수 있음을 보여주었습니다. [1] S/Ti3C2Tx MXene 복합재료의 황 함량은 음극의 전기화학적 성능에 영향을 미치는 중요한 요소입니다. [2] Co3O4@PEI/Ti3C2Tx MXene 합성물을 제작하기 위해 분지형 폴리에틸렌이민(PEI) 기능화된 Ti3C2Tx MXene 시트에 Co3O4 나노결정을 효과적으로 리벳팅하기 위해 간단한 비공유 화학적 접근 및 열수 방법이 사용되었습니다. [3] nan [4] 우리는 바이메탈 CoZn 기반 제올라이트 이미다졸라이트 프레임워크와 Ti3C2Tx MXene 합성물(CoZn-ZIF/Ti3C2Tx)에서 파생된 그래핀과 같은 탄화 티타늄(CoOx-NC/TiO2C)에 로드된 탄소 나노튜브와 결합된 일련의 코발트 종을 합성합니다. [5] LVO/Ti3C2Tx MXene 합성물은 순수한 LVO 및 상업용 흑연 양극과 비교하여 속도 성능 및 장기 사이클 안정성 측면에서 놀라운 전기화학적 성능을 나타냈습니다. [6] 높은 부하(및 높은 전도도)에서 Ti3C2Tx MXene 복합 재료는 전자기파의 반사로 인해 RF 필드에서 가열되지 않는 반면, 전도성이 낮은 복합 재료는 전기 침투 네트워크가 없기 때문에 가열되지 않습니다. [7] 본 논문에서는 NiFe2O4로 장식된 Ti3C2Tx MXene 복합재료를 현장 화학 공침법으로 합성하였다. [8] 유연하고 신축성 있는 하이브리드 3D 그래핀/Ti3C2Tx MXene 복합 박막은 화학 기상 증착(CVD) 및 선택적 에칭 방법을 사용하여 제작되었습니다. [9]
Ti3c2 Mxene Composite Ti3c2 Mxene 합성물
In the present work, we proposed a facile strategy to synthesize the Fe3O4/Ti3C2 MXene composite. [1] The significance of this work is that a coating structure NiCoFe-LDH/Ti3C2 MXene composite morphology was successfully synthesized for the first time which showed excellent electrochemical performance in the application of supercapacitors. [2] Specifically, the FeCo-Ti3C2 MXene composite displayed a broad effective bandwidth (RL. [3] A black phosphorus (BP)/Ti3C2 MXene composite was prepared by compositing small BP nanoparticles with exfoliated Ti3C2 layers. [4] In this work, a new microporous MIL-100(Fe)/Ti3C2 MXene composite was constructed as a well-designed non-noble metal-based Schottky junction photocatalyst with improved nitrogen fixation ability. [5]현재 작업에서 우리는 Fe3O4/Ti3C2 MXene 합성물을 합성하기 위한 손쉬운 전략을 제안했습니다. [1] 이 연구의 의의는 코팅 구조 NiCoFe-LDH/Ti3C2 MXene 복합 형태가 처음으로 성공적으로 합성되어 슈퍼커패시터 적용에서 우수한 전기화학적 성능을 보였다는 것입니다. [2] 특히, FeCo-Ti3C2 MXene 합성물은 넓은 유효 대역폭(RL. [3] 흑색 인(BP)/Ti3C2 MXene 복합물은 박리된 Ti3C2 층과 함께 작은 BP 나노입자를 합성하여 제조되었습니다. [4] 이 작업에서 새로운 미세 다공성 MIL-100(Fe)/Ti3C2 MXene 합성물은 질소 고정 능력이 개선된 잘 설계된 비귀금속 기반 쇼트키 접합 광촉매로 구성되었습니다. [5]
mxene composite film Mxene 복합 필름
The CCM@void@MXene composite films with “egg-box” structure are ultimately achieved by annealing treatment with spherical CCM@MXene as “egg” and Ti3C2Tx MXene layers as “box”. [1] Herein, a method of coating Ti3C2Tx with different sizes was proposed to prepare silver nanowire/MXene composite films. [2] In this work, aiming at the excellent triboelectric ability, alternate-layered MXene composite films-based TENG with abundant fluorine groups(-F) through layer-by-layer stacking are designed and fabricated. [3] In this work, a flexible TENG, based on wrinkled PDMS/MXene composite films prepared by facile ultraviolet ozone (UVO) irradiation, was constructed as self-powered tactile sensor. [4] Herein, a flexible conductive polyimide fiber (PIF)/MXene composite film with densely stacked "rebar-brick-cement" lamellar structure is fabricated using the simple vacuum filtration plus thermal imidization technique. [5] Herein, we develop a novel roll-to-roll layer-by-layer assembly strategy to construct bark-shaped carbon nanotube (CNT)/Ti3C2Tx MXene composite film on the fiber surface. [6] Here we demonstrate a novel electrochemical polymerization (EP) enabled by a 2D transition metal carbide MXene for obtaining conjugated polymer-MXene composite films deposited on conducting substrates without using traditional electrolytes, indispensable compounds for commonly electrochemical polymerization. [7]"계란 상자" 구조의 CCM@void@MXene 복합 필름은 궁극적으로 구형 CCM@MXene을 "계란"으로, Ti3C2Tx MXene 층을 "상자"로 어닐링 처리하여 달성됩니다. [1] 여기서, 은 나노와이어/MXene 복합막을 제조하기 위해 Ti3C2Tx를 서로 다른 크기로 코팅하는 방법을 제안하였다. [2] 이 연구에서는 우수한 마찰전기 능력을 목표로 층별 적층을 통해 풍부한 불소기(-F)를 갖는 교대로 적층된 MXene 복합 필름 기반 TENG를 설계 및 제조합니다. [3] 이 작업에서 UVO(자외선 오존) 조사에 의해 준비된 주름진 PDMS/MXene 복합 필름을 기반으로 하는 유연한 TENG가 자체 전원 촉각 센서로 구성되었습니다. [4] 여기서, 조밀하게 적층된 "철근-벽돌-시멘트" 층상 구조를 갖는 유연한 전도성 폴리이미드 섬유(PIF)/MXene 복합 필름은 단순 진공 여과 및 열 이미드화 기술을 사용하여 제조됩니다. [5] nan [6] 여기에서 우리는 2D 전이 금속 카바이드 MXene에 의해 활성화된 새로운 전기화학 중합(EP)을 시연하여 일반적으로 전기화학 중합에 필수적인 화합물인 전통적인 전해질을 사용하지 않고 전도성 기판에 증착된 공액 폴리머-MXene 복합 필름을 얻습니다. [7]
mxene composite membrane Mxene 복합 멤브레인
In this work, for the first time, the dopamine-functionalized graphene oxide (DGO) nanosheets were intercalated into the MXene (Ti3C2Tx) nanosheets, and subsequently, a series of novel DGO/MXene composite membranes were prepared via vacuum filtration on hydrophilic polyvinylidene fluoride (PVDF) membranes as the support layer. [1] Importantly, the excellent photo-induced self-cleaning capability and low oil-adhesion contributed to the high anti-fouling resistance, outstanding reusability, and durability of 2D MXene composite membrane. [2] These indicated the good antifouling properties of MXene composite membranes. [3]이 작업에서 처음으로 도파민 기능화된 산화 그래핀(DGO) 나노시트를 MXene(Ti3C2Tx) 나노시트에 삽입한 후 친수성 폴리비닐리덴 플루오라이드에 대한 진공 여과를 통해 일련의 새로운 DGO/MXene 복합막을 제조했습니다. (PVDF) 멤브레인을 지지층으로 사용합니다. [1] 중요한 것은 우수한 광유도 자가 세척 능력과 낮은 오일 접착력이 2D MXene 복합막의 높은 내오염성, 탁월한 재사용성 및 내구성에 기여했다는 점입니다. [2] 이는 MXene 복합막의 우수한 방오 특성을 나타냅니다. [3]
mxene composite aerogel Mxene 복합 에어로젤
Ultimately, the lightweight PVA/MXene composite aerogels (~33 mg cm−3) can reach the compressible strength at 60% strain of 127. [1] Herein, a functionalized cellulose/MXene composite aerogel is prepared by the oxidative self-polymerization of dopamine hydrochloride and freeze-drying, which exhibits an excellent adsorption performance for methylene blue (MB). [2] Single-module solar-driven interfacial evaporators based on Janus cellulose nanofibril/MXene composite aerogels were developed, achieving evaporation rates as high as 2. [3]궁극적으로 경량 PVA/MXene 복합 에어로겔(~33mg cm-3)은 127의 60% 변형률에서 압축 강도에 도달할 수 있습니다. [1] 여기서, 기능성 셀룰로오스/MXene 복합 에어로겔은 메틸렌 블루(MB)에 대한 우수한 흡착 성능을 나타내는 도파민 염산염의 산화적 자가 중합 및 동결 건조에 의해 제조된다. [2] nan [3]
mxene composite material
The strategy of preparing MnCO3 and MXene composite materials through self-assembly of hydrogen bonds to enhance the interface effect has a good application prospect in the design of energy storage materials. [1] The sensitivity of sensor characterized by resonant frequency and intensity with a wide humidity range from 10% to 95% RH can be improved by using the GO@MXENE composite material as sensitive material of humidity. [2]nan [1] 10% ~ 95% RH의 넓은 습도 범위에서 공진 주파수 및 강도를 특징으로 하는 센서의 감도는 습도에 민감한 재료로 GO@MXENE 복합 재료를 사용하여 향상될 수 있습니다. [2]
mxene composite nanosheet
Then, carbon nanotubes (CNTs)/MXene composite nanosheets were inserted into the CS via vacuum impregnation. [1] In this work, a series of Co3 O4 -doped 3 D MXene/RGO hybrid porous aerogels is designed and prepared through a facile in situ reduction and thermal annealing process, in which the reduced graphene oxide (RGO) conductive network can electrically link the separated Co3 O4 -MXene composite nanosheets, leading to enhanced electronic conductivity. [2]그런 다음, 탄소 나노튜브(CNT)/MXene 복합 나노시트를 진공 함침을 통해 CS에 삽입했습니다. [1] 이 연구에서 일련의 Co3 O4 도핑된 3 D MXene/RGO 하이브리드 다공성 에어로겔은 환원 그래핀 산화물(RGO) 전도성 네트워크가 분리된 산화 그래핀을 전기적으로 연결할 수 있는 손쉬운 현장 환원 및 열 어닐링 공정을 통해 설계 및 준비되었습니다. Co3 O4 -MXene 복합 나노 시트는 전자 전도성을 향상시킵니다. [2]
mxene composite catalyst Mxene 복합 촉매
In this work, the g-C3 N4 /V2 C MXene composite catalyst was prepared by solvothermal method, and its denitration performance under synergistic plasma (NTP) was investigated. [1] A series of MXene composite catalysts were successfully synthesized by densely coating sulfur vacancy-rich CdS nanoparticles on Ti3C2. [2]본 연구에서는 solvothermal 방법으로 g-C3 N4 /V2 C MXene 복합 촉매를 제조하고 NTP(synergistic plasma) 하에서의 탈질 성능을 조사하였다. [1] Ti3C2에 유황 공극이 풍부한 CdS 나노 입자를 조밀하게 코팅하여 일련의 MXene 복합 촉매를 성공적으로 합성했습니다. [2]
mxene composite foam Mxene 복합 폼
Herein, we prepared poly(vinylidene fluoride)/cobalt (Co)/MXene composite foams that exhibited applicable impedance matching, enhanced EMW absorption and high-performance thermal conduction properties. [1] The multilayer reduced graphene oxide/MXene composite foam shows an excellent EMI shielding effectiveness of more than ~28 dB in C and ~35 dB in X band. [2]여기에서 우리는 적용 가능한 임피던스 매칭, 향상된 EMW 흡수 및 고성능 열전도 특성을 나타내는 폴리(비닐리덴 플루오라이드)/코발트(Co)/MXene 복합 폼을 준비했습니다. [1] 다층 환원 그래핀 옥사이드/MXene 복합 폼은 C에서 ~28dB 이상, X 밴드에서 ~35dB 이상의 우수한 EMI 차폐 효과를 보여줍니다. [2]