Micro Indentation(마이크로 들여쓰기)란 무엇입니까?
Micro Indentation 마이크로 들여쓰기 - The structure, surface characteristics, mechanical properties of coated and treated samples was investigated using XRD, FESEM/EDX, XPS, AFM, and micro indentation. [1] Comparative studies were conducted on ITZ of IOTs concrete and crushed gravel (natural aggregate, NA) concrete by statistical grid nanoindentation technique, scanning electron microscope (SEM), atomic force microscope (AFM), energy dispersive spectroscopy (EDS), and micro indentation. [2] The indentation response of polycrystalline soft doped-lead zirconate titanate (PZT) with varying ferroelectric domain configurations is investigated using nano and micro indentation. [3] The indentation response of polycrystalline lead zirconate titanate (PZT) with varying ferroelastic domain configurations is investigated using nano and micro indentation. [4] Scanning electron microscope (SEM), X-ray diffraction (XRD), micro indentation, impact, thermal shock, and potentiodynamic polarization tests were conducted to evaluate the microstructure and engineering properties of the studied enamel coatings. [5] The influence of the number of Al2O3 layers on the mechanical properties, corrosion behavior and oxidation characteristics of the coatings was studied using nano/micro indentation, electrochemical corrosion, and high temperature static oxidation tests. [6] A wide range of micro indentations—henceforth called “dimples”—were fabricated onto honed flat aluminum samples by means of ultrashort pulse laser texturing and the frictional behavior at different lubricating oil temperatures (30 and 90 °C) was analyzed. [7] The coke microstrength and macrostrength were determined using ultra-micro indentation and tensile test to understand the effect of coal precursor properties on the strength of the resulting coke and the changes when processed under the simulated BF conditions. [8] ; the coke microstrength was measured using ultramicro indentation. [9] , in micro indentation). [10]XRD, FESEM/EDX, XPS, AFM 및 micro indentation을 사용하여 코팅 및 처리된 샘플의 구조, 표면 특성, 기계적 특성을 조사했습니다. [1] IOTs 콘크리트 및 분쇄된 자갈(천연골재, NA) 콘크리트의 ITZ에 대한 비교연구는 통계적 그리드 나노인덴테이션 기법, 주사전자현미경(SEM), 원자력현미경(AFM), 에너지분산분광법(EDS) 및 미세압입에 의해 수행되었다. [2] 나노 및 마이크로 압입을 사용하여 다양한 강유전성 도메인 구성을 갖는 다결정 소프트 도핑 납 지르콘산 티탄산염(PZT)의 압입 응답을 조사합니다. [3] 다양한 강탄성 도메인 구성을 갖는 다결정질 납 지르콘산 티탄산염(PZT)의 압입 응답은 나노 및 마이크로 압입을 사용하여 조사됩니다. [4] 주사전자현미경(SEM), X선 회절(XRD), 미세 압입, 충격, 열 충격 및 전위 역학적 편광 테스트를 수행하여 연구된 에나멜 코팅의 미세 구조 및 공학적 특성을 평가했습니다. [5] 나노/마이크로 압입, 전기화학적 부식 및 고온 정적 산화 시험을 사용하여 코팅의 기계적 특성, 부식 거동 및 산화 특성에 대한 Al2O3 층 수의 영향을 연구했습니다. [6] 초단파 레이저 텍스처링을 통해 연마된 평평한 알루미늄 샘플에 광범위한 미세 압입(이하 "딤플"이라고 함)을 제작하고 다양한 윤활유 온도(30 및 90°C)에서의 마찰 거동을 분석했습니다. [7] 코크스 미세강도 및 거대강도는 초미세 압입 및 인장 시험을 사용하여 결정되어 생성된 코크스의 강도와 시뮬레이션된 BF 조건에서 처리될 때의 변화에 대한 석탄 전구체 특성의 영향을 이해합니다. [8] ; 코크스 미세강도는 초미세 압입을 사용하여 측정되었습니다. [9] , 마이크로 들여쓰기). [10]
Vicker Micro Indentation 비커 마이크로 들여쓰기
The variation of microhardness value in the melt pool zone of the weldment was assessed through Vickers micro indentation method. [1] To evaluate the alloy’s fracture toughness and its dependence on the material’s microstructure, the Vickers micro indentation technique was deployed on Ni2MnGa samples under no load, as well as under several magnetic and/or mechanical loading conditions. [2]Vickers micro indentation 방법을 통해 용접물의 용융풀 영역에서 미세경도 값의 변화를 평가하였다. [1] 합금의 파괴 인성과 재료의 미세 구조에 대한 의존성을 평가하기 위해 Vickers 미세 압입 기술은 무부하 및 여러 자기 및/또는 기계적 하중 조건에서 Ni2MnGa 샘플에 적용되었습니다. [2]
micro indentation method
The variation of microhardness value in the melt pool zone of the weldment was assessed through Vickers micro indentation method. [1] Stress exponent values were determined through a constant loading process utilizing a spherical micro indentation method, where the strain rate is extracted from the indentation rate. [2] The mechanical features of friction film formed on particles surface were characterized through the Nano/Micro indentation method, and the micro-topography was observed by SEM. [3]Vickers micro indentation 방법을 통해 용접물의 용융풀 영역에서 미세경도 값의 변화를 평가하였다. [1] 응력 지수 값은 압입 속도에서 변형률 속도를 추출하는 구형 미세 압입법을 사용하여 일정한 하중 과정을 통해 결정되었습니다. [2] 입자 표면에 형성된 마찰막의 기계적 특성은 Nano/Micro indentation 방법을 통해 특성화하였고, 마이크로 토포그래피는 SEM으로 관찰하였다. [3]
micro indentation test
The films categorised as not acceptable adhesion in Rockwell micro indentation test have fared poorly in the Nano scratch test, and the films which emerged as acceptable adhesion have better adhesion strength registered in the Nano scratch test. [1] The analysis of the mechanical properties of the coatings comprises the measurement of the surface hardness by micro indentation tests and the evaluation of the scratch resistance. [2] Fracture toughness measurements were made on the intermediate layers (GZ + YSZ layer of the composite TBC and porous GZ layer of the layered TBC respectively) using micro indentation tests. [3]Rockwell micro indentation test에서 허용되지 않는 접착력으로 분류된 필름은 Nano 스크래치 테스트에서 좋지 않은 결과를 얻었으며, 허용 가능한 접착력으로 나타난 필름은 Nano 스크래치 테스트에 등록된 더 나은 접착력을 나타냅니다. [1] 코팅의 기계적 특성 분석은 미세 압입 시험에 의한 표면 경도 측정 및 내스크래치성 평가로 구성됩니다. [2] 파괴 인성 측정은 미세 압입 시험을 사용하여 중간 층(복합 TBC의 GZ + YSZ 층 및 적층 TBC의 다공성 GZ 층)에 대해 이루어졌습니다. [3]
micro indentation technique
To evaluate the alloy’s fracture toughness and its dependence on the material’s microstructure, the Vickers micro indentation technique was deployed on Ni2MnGa samples under no load, as well as under several magnetic and/or mechanical loading conditions. [1] The tribological properties of these coatings were examined under base-oil lubrication via ball-on-disk tribo-tester and micro indentation technique was used to characterize the fracture toughness. [2]합금의 파괴 인성과 재료의 미세 구조에 대한 의존성을 평가하기 위해 Vickers 미세 압입 기술은 무부하 및 여러 자기 및/또는 기계적 하중 조건에서 Ni2MnGa 샘플에 적용되었습니다. [1] 이러한 코팅의 마찰 특성은 ball-on-disk tribo-tester를 통한 기유 윤활 하에서 조사되었으며 미세 압입 기술을 사용하여 파괴 인성을 특성화했습니다. [2]