Micro Ct(마이크로 CT)란 무엇입니까?
Micro Ct 마이크로 CT - Treated mutant mice showed a significant increase of cartilage proteoglycan sulfation and a relevant improvement of the skeletal phenotype based on measurements of several bony elements and bone quality by DEXA and micro CT. [1] Micro CT and electron microscopy revealed an intimate contact at the interface and 51-63 Vol% porosity in the porous layer was achieved with 44-48 % open porosity. [2] The x-ray attenuation capability of all prepared AgNTs was evaluated using micro CT. [3] Micro CT was conducted to investigate the effects of dencichine on osteoclastogenesis in ovariectomized (OVX) mice. [4] The proposed methodology may help the operator to estimate rock compressibility and its failure mode under different loadings by merely using micro CT-scan images rather than direct testing in the lab. [5] In addition, bone mineral density (BMD) and micro CT were used to assess the left femur. [6] We dilated each balloon in each silicone tube with nominal pressure (NP) and 20 atmosphere (HP) and took a picture using a micro CT. [7] The samples were subjected occlusal load and thermal cycling, a first sample of each group was observed by micro CT and in a second sample (both samples randomly selected) length of connection was measured, while the rest of the samples were mounted on devices according to the bacterial microfiltration model with Porphyromonas gingivalis. [8] This article reviews the strengths and limitations of micro CT in the analysis of stones. [9] Methods:15 formalin fixed human cadaver head specimens were scanned by CBCT, high resolution CT, and Micro CT, respectively. [10] Porosity and defects in the manufactured parts based on micro CT-scanned images are represented as epistemic uncertainty. [11] Micro CT was used to supervise the surgical procedure. [12] The main goal of this study was to assess the progress of vertebral stability after lumbar interbody fusion related to microcomputed tomography (micro CT), biomechanical analysis, and histological assessment towards spine fusion. [13] In this paper, a Micro CT was used to collect wood images. [14] For this purpose, kidney stones were demineralized, sectioned, stained, and imaged by microscopy, using micro CT for precise orientation. [15] 2 × 9 mm) was digitized by reverse engineering techniques using micro CT and imported into Computer Aided Design (CAD) software. [16] After 12 weeks, the specimens were examined by micro CT, biomechanics and histopathology to evaluate osteogenesis and osseointegration. [17] The result of using both techniques subsequently showed the formation of a porous network throughout the samples with inner and outer pores interconnected, characterized by scanning electron microscopy (SEM), micro X-ray computerized tomography scanning (micro CT), and processing those images with Image J. [18] In recent years, with the development of technology, in addition to traditional CT, some emerging types of CT, such as dual-energy CT and micro CT, have emerged for vascular imaging and providing anatomical information for calcification. [19] Osteogenesis and osseointegration were evaluated by Micro CT, toluidine blue staining, and immunohistochemical staining at 4, 8, and 12 weeks postoperatively. [20] Femur microstructure was imaged by Micro CT. [21] Micro CT scans and Alcian blue staining of zebrafish demonstrate that mutations in bmp3 cause midface hypoplasia, suggesting that bmp3 regulates cranial neural crest cells. [22] The tissue samples were harvested after 4- and 8-weeks post-transplantation and assessed by optical imaging, micro CT, and H&E staining methods. [23] Healing was evaluated at 2–4 weeks using PCR, RNA sequencing, micro CT, histology, and biomechanical testing. [24] METHODS/STUDY POPULATION: 3 groups of scaffolds will be 3D printed using FDM: solid scaffold, porous scaffold and porous scaffold with collagen gel (n=10 for each group) Internal geometries and surface structure will be analyzed using micro CT and Scanning Electron Mi RESULTS/ANTICIPATED RESULTS: We hypothesize that porosity and collagen filler will increase signal from Picogreen assay and ALP assay when normalized to scaffold surface area, indicating enhanced cell proliferation and differentiation. [25] Micro CT and three-point bending tests were conducted to evaluate bone microstructure and biomechanics. [26] Micro CT, which can be used to analyze teeth in a non-destructive manner with high sensitivity, was employed in the present study. [27] Micro CT was used to analyze the quantitative parameters of the microstructure of tibia subchondral bone in mice. [28] The gas permeability was continually measured during the loading and micro CT-images were acquired before-loading, at peak-load and after-unloading to investigate any induced damage and its potential effect on the permeability. [29] Based on micro CTscan of extracted maxillary anterior teeth, 3D endodontically treated teeth model was created. [30] Microfocus X-ray computed tomography (micro CT) has enabled non-destructive 3D assessment of tooth demineralization. [31] Methodology: CT Scanning Three calcaneus bone samples were scanned using micro CT (SkyScan 1172, Aarteslaar, Belgium) at the voxel size of 17. [32] The growth orientation of BMSCs followed the underlying aligned nanofiber morphology, accompanied with increased alizarin red stain, alkaline phosphatase (ALP) activity and calcium content in vitro while, a rabbit calvaria bone defect model was used in an in vivo study with micro CT and histology analyses. [33] Eight weeks after repair, the TBI was evaluated biomechanically, histologically, and via micro CT. [34] The first case has an arrangement of collector channels according to micro CT (Gong and Francis, 2014). [35] The qualitative degree of bone fusion assessed by direct palpation, simple radiographs, micro CT, and histological evaluation was significantly different among the four groups. [36] The harvested specimens of four and eight weeks were used to evaluate the bone forming ability by micro CT and histological examination. [37] We found a distance from 89 to 121 micrometers with IOS studied and 25 micrometers with micro CT. [38] We developed a SAH-scoring system to assess SAH severity in mice using micro CT and longitudinally analysed LAV by intravenous digital subtraction angiography (i. [39] X-ray and Micro CT were used to evaluate the healing of bone tissue at 2 w, 4 w and 6 w after model establishment. [40] The first case has an arrangement of collector channels according to micro CT (Gong and Francis, 2014). [41] Varieties of indicators were measured for evaluation of anti-inflammation effect of HQH, including hind paw swelling, arthritis scores, micro CT, and histopathological changes and the level of pro-inflammatory cytokines in the serum, including tumor necrosis factor alpha (TNF-±) and interleukin-18 (IL-18). [42] Conversely, X‐ray‐based 3D imaging modalities, such as micro CT, can image non‐transparent samples, at high resolution, without requiring complicated or expensive immunolabeling and clearing protocols, or fluorescent reporters. [43] In vivo analysis was performed through micro CT, laser confocal microscopy, immunohistochemistry and evaluation of bone cytoarchitecture through hematoxylin and eosin (HE) staining. [44] The specimens were evaluated in micro CT, histology, and immunohistochemistry. [45] The morphology, cross section scan, porosity, and thermal decomposition of products were characterized by computerized tomography (micro CT), mercury injection apparatus and thermogravimetric analysis (TG). [46] All other rats were sacrificed 3-months post-surgery for fusion evaluation via manual palpation and micro CT. [47] Then, the specimens are placed in a micro CT-scanner to investigate the unsaturated state changed by evaporation from a microscopic point of view. [48] CCK-8, plate-colony formation, apoptosis, cell cycle, and Transwell assays were performed to evaluate the therapeutic potential of the PSP-TRIM24 siRNA complex in vitro, whereas the in vivo therapeutic efficacy was monitored by small animal imaging, radiography, and micro CT. [49] Histological analysis of the new bone formation in the ribs confirmed infectious origin, as does Micro CT of C5 and C6. [50]처리된 돌연변이 마우스는 DEXA 및 마이크로 CT에 의한 여러 골 요소 및 골질 측정을 기반으로 연골 프로테오글리칸 황산화의 상당한 증가 및 골격 표현형의 관련 개선을 보여주었습니다. [1] Micro CT와 전자현미경은 계면에서 긴밀한 접촉을 나타내었고 다공성 층의 51-63 Vol% 다공성은 44-48% 개방 다공성으로 달성되었습니다. [2] 준비된 모든 AgNT의 x-선 감쇠 능력은 마이크로 CT를 사용하여 평가되었습니다. [3] 난소 절제술(OVX) 마우스에서 파골세포 형성에 대한 덴시친의 효과를 조사하기 위해 마이크로 CT를 수행했습니다. [4] 제안된 방법론은 작업자가 실험실에서 직접 테스트하는 대신 마이크로 CT 스캔 이미지를 사용하여 다양한 하중에서 암석 압축성과 파괴 모드를 추정하는 데 도움이 될 수 있습니다. [5] 또한, 골밀도(BMD)와 미세 CT를 사용하여 왼쪽 대퇴골을 평가했습니다. [6] 공칭 압력(NP)과 20기압(HP)으로 각 실리콘 튜브의 풍선을 팽창시키고 마이크로 CT를 사용하여 사진을 찍었습니다. [7] 샘플에 교합 하중과 열 순환을 가하고 각 그룹의 첫 번째 샘플을 마이크로 CT로 관찰하고 두 번째 샘플(두 샘플 모두 무작위로 선택)에서 연결 길이를 측정한 반면 나머지 샘플은 다음 기준에 따라 장치에 장착했습니다. Porphyromonas gingivalis를 사용한 세균 정밀여과 모델. [8] 이 기사는 돌 분석에서 마이크로 CT의 장점과 한계를 검토합니다. [9] 방법: 15개의 포르말린 고정 인간 사체 머리 표본을 CBCT, 고해상도 CT 및 Micro CT로 각각 스캔하였다. [10] 마이크로 CT 스캔 이미지를 기반으로 제조된 부품의 기공 및 결함은 인식적 불확실성으로 표현됩니다. [11] 마이크로 CT는 수술 절차를 감독하는 데 사용되었습니다. [12] 본 연구의 주요 목적은 마이크로컴퓨터단층촬영(micro CT)과 관련된 요추체간 유합술 후 척추 안정성의 경과를 평가하고, 생체역학적 분석과 척추 유합에 대한 조직학적 평가를 평가하는 것이다. [13] 본 논문에서는 Micro CT를 이용하여 목재 영상을 수집하였다. [14] 이를 위해 정확한 방향을 위해 마이크로 CT를 사용하여 신장 결석을 탈회하고, 절단하고, 염색하고, 현미경으로 영상화했습니다. [15] 2 × 9mm)는 마이크로 CT를 사용하는 리버스 엔지니어링 기술로 디지털화되어 CAD(Computer Aided Design) 소프트웨어로 가져왔습니다. [16] 12주 후, 표본을 미세 CT, 생체역학 및 조직병리학으로 검사하여 골형성 및 골유착을 평가했습니다. [17] 두 기술을 모두 사용한 결과는 내부 및 외부 기공이 상호 연결된 샘플 전체에 다공성 네트워크의 형성을 보여주었으며, 주사 전자 현미경(SEM), 마이크로 X선 컴퓨터 단층 촬영 스캐닝(마이크로 CT) 및 이러한 이미지 처리를 특징으로 합니다. 이미지 J. [18] 최근 몇 년 동안 기술의 발전으로 기존의 CT 외에도 이중 에너지 CT 및 마이크로 CT와 같은 일부 새로운 유형의 CT가 등장하여 혈관 영상 및 석회화에 대한 해부학적 정보를 제공하고 있습니다. [19] 수술 후 4주, 8주, 12주에 Micro CT, toluidine blue 염색, 면역조직화학적 염색으로 골형성과 골유착을 평가하였다. [20] 대퇴골 미세구조는 Micro CT로 영상화되었습니다. [21] 마이크로 CT zebrafish의 스캔과 Alcian blue 염색은 돌연변이가 bmp3에서 중안면 저형성증을 유발하여 bmp3가 두개골을 조절함을 시사합니다. 신경 능선 세포. [22] 조직 샘플은 이식 후 4주 및 8주 후에 수확하고 광학 이미징, 마이크로 CT 및 H&E 염색 방법으로 평가했습니다. [23] 치유는 PCR, RNA 시퀀싱, 마이크로 CT, 조직학 및 생체역학 테스트를 사용하여 2-4주에 평가되었습니다. [24] 방법/연구 인구: FDM을 사용하여 3개의 스캐폴드 그룹을 3D 인쇄합니다. 콜라겐 겔이 포함된 고체 스캐폴드, 다공성 스캐폴드 및 다공성 스캐폴드(각 그룹에 대해 n=10) 마이크로 CT 및 주사 전자 Mi를 사용하여 내부 기하학 및 표면 구조를 분석합니다. 결과/예상 결과: 우리는 다공성 및 콜라겐 충전제가 스캐폴드 표면적으로 정규화될 때 Picogreen 분석 및 ALP 분석에서 신호를 증가시켜 향상된 세포 증식 및 분화를 나타내는 것으로 가정합니다. [25] 미세 CT와 3점 굽힘 시험을 통해 뼈의 미세구조와 생체역학을 평가하였다. [26] 본 연구에서는 고감도로 비파괴적으로 치아를 분석할 수 있는 Micro CT를 사용하였다. [27] 마이크로 CT는 마우스의 경골 연골하골 미세구조의 정량적 매개변수를 분석하는 데 사용되었습니다. [28] 가스 투과성은 로딩 중에 지속적으로 측정되었으며 유도된 손상과 투과성에 대한 잠재적인 영향을 조사하기 위해 로딩 전, 피크 로드 및 언로딩 후 마이크로 CT 이미지를 획득했습니다. [29] 추출된 상악 전치부의 마이크로 CT 스캔을 기반으로 3D 근관 치료 치아 모델을 생성했습니다. [30] Microfocus X선 컴퓨터 단층촬영(micro CT)은 치아 탈회에 대한 비파괴 3D 평가를 가능하게 했습니다. [31] 방법론: CT 스캔 마이크로 CT(SkyScan 1172, Aarteslaar, Belgium)를 사용하여 17의 복셀 크기에서 3개의 종골 샘플을 스캔했습니다. [32] BMSC의 성장 방향은 증가된 알리자린 레드 염색, 알칼리성 포스파타제(ALP) 활성 및 시험관 내 칼슘 함량과 함께 기본 정렬된 나노섬유 형태를 따랐으며, 토끼 calvaria 뼈 결함 모델은 마이크로 CT 및 조직학을 사용한 생체 내 연구에서 사용되었습니다. 복수. [33] 수리 후 8주 후에 TBI는 생체역학적으로, 조직학적으로, 그리고 마이크로 CT를 통해 평가되었습니다. [34] 첫 번째 경우는 마이크로 CT에 따라 수집기 채널이 배열되어 있습니다(Gong and Francis, 2014). [35] 직접 촉진, 단순 방사선 사진, 마이크로 CT, 조직학적 평가로 평가한 질적 골융합 정도는 4군에서 유의한 차이를 보였다. [36] 4주와 8주에 채취한 검체를 이용하여 마이크로 CT와 조직학적 검사를 통해 골형성능력을 평가하였다. [37] IOS 연구에서는 89~121마이크로미터, 마이크로 CT에서는 25마이크로미터의 거리를 찾았습니다. [38] 우리는 마이크로 CT를 사용하여 마우스에서 SAH 중증도를 평가하기 위한 SAH 점수 시스템을 개발하고 정맥 디지털 빼기 혈관조영술(i. [39] 모델 확립 후 2w, 4w 및 6w에서 뼈 조직의 치유를 평가하기 위해 X-ray 및 Micro CT를 사용했습니다. [40] 첫 번째 경우는 마이크로 CT에 따라 수집기 채널이 배열되어 있습니다(Gong and Francis, 2014). [41] HQH의 항염 효과 평가를 위해 뒷발 종창, 관절염 점수, 미세 CT, 조직병리학적 변화를 포함한 다양한 지표와 종양 괴사 인자 알파(TNF-± ) 및 인터루킨-18(IL-18). [42] 반대로, 마이크로 CT와 같은 X선 기반 3D 영상 기법은 복잡하거나 값비싼 면역 표지 및 제거 프로토콜이나 형광 리포터 없이도 불투명한 샘플을 고해상도로 영상화할 수 있습니다. [43] 생체 내 분석은 마이크로 CT, 레이저 공초점 현미경, 면역조직화학 및 헤마톡실린 및 에오신(HE) 염색을 통한 골 세포 구조 평가를 통해 수행되었습니다. [44] 표본은 마이크로 CT, 조직학 및 면역조직화학에서 평가되었습니다. [45] 제품의 형태, 단면 스캔, 다공성 및 열분해는 컴퓨터 단층 촬영(마이크로 CT), 수은 주입 장치 및 열중량 분석(TG)으로 특성화되었습니다. [46] 다른 모든 쥐는 수동 촉진 및 마이크로 CT를 통한 융합 평가를 위해 수술 후 3개월에 희생되었습니다. [47] 그런 다음, 시료를 마이크로 CT 스캐너에 넣어 증발에 의해 변화하는 불포화 상태를 현미경적 관점에서 조사합니다. [48] CCK-8, 플레이트 콜로니 형성, 세포 사멸, 세포 주기 및 Transwell 분석을 수행하여 PSP-TRIM24 siRNA 복합체의 시험관 내 치료 가능성을 평가한 반면, 생체 내 치료 효능은 소동물 영상, 방사선 촬영 및 마이크로 CT. [49] 갈비뼈의 새로운 뼈 형성에 대한 조직학적 분석은 C5 및 C6의 Micro CT와 마찬가지로 감염 기원을 확인했습니다. [50]
micro computed tomography 마이크로 컴퓨터 단층 촬영
OBJECTIVES The purpose of this study was to compare the effectiveness of three different instruments on the cement loss and roughness of the root surface following scaling and root planning (SRP) using micro computed tomography (micro CT). [1] We examined 98 jackstones from 50 different patient specimens using micro-computed tomography (micro CT) and infrared (IR) spectroscopy. [2] Further, a Micro-computed tomography (micro CT) examination revealed the absence of AM-induced pores after HT. [3] Pores inside the ceramic samples were characterized by density measurement and micro computed tomography (Micro CT) analysis. [4] Further, X-ray micro computed tomography (X-ray micro CT) test on the CFSWed and UwFSWed samples revealed the presence of welding defects (porosity) in the stir zone. [5] Each sample was scanned with a micro-computed tomography (uCT) scanner (Biomedical Micro CT Scanner, Scanco Medical, Switzerland) to quantify bone volume/total volume ratio (BV/TV), trabecular thickness, trabecular separation, trabecular number, and connectivity density. [6] The microstructures of these nano-ceramic reinforced metal matrix foams were studied by scanning electron microscopy (SEM) in combination with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and X-ray micro computed tomography (X-ray micro CT). [7] Findings of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) and micro-computed tomography (micro CT)-based angiography indicated that PTM scaffold could increase blood perfusion and promote new vessel ingrowth at 4 weeks after surgery, meanwhile, a plenty of newly formed vessels with well-architective structure were observed at 8 weeks. [8] X-ray images and micro computed tomography (micro CT) were used to assess morphological changes in replanted teeth and surrounding alveolar bone. [9]목표 이 연구의 목적은 미세 컴퓨터 단층 촬영(micro CT)을 사용하여 스케일링 및 치근 계획(SRP) 후 시멘트 손실 및 치근 표면 거칠기에 대한 세 가지 도구의 효과를 비교하는 것이었습니다. [1] 우리는 마이크로 컴퓨터 단층 촬영(micro CT) 및 적외선(IR) 분광법을 사용하여 50명의 다른 환자 표본에서 98개의 잭스톤을 조사했습니다. [2] nan [3] 세라믹 샘플 내부의 기공은 밀도 측정 및 마이크로 CT(마이크로 CT) 분석으로 특성화되었습니다. [4] 또한, CFSWed 및 UwFSWed 샘플에 대한 X선 마이크로 컴퓨터 단층 촬영(X선 마이크로 CT) 테스트는 교반 영역에서 용접 결함(다공성)의 존재를 보여주었습니다. [5] nan [6] nan [7] nan [8] nan [9]
ray micro computed 레이 마이크로 컴퓨팅
The structure gradient was analysed and confirmed with scanning electron microscopy (SEM) images, X-ray micro computed tomography (micro CT) and finite element method (FEM) simulation. [1] Contrast enhanced X-ray micro computed tomography (micro CT) is an emerging highly sensitive imaging technique capable of high resolution visualization of rodent brain. [2] X-ray micro computed tomography (micro CT) provides the missing 3D information of the microstructures inside samples. [3]구조 구배는 주사전자현미경(SEM) 이미지, X선 마이크로 CT(마이크로 CT) 및 유한요소법(FEM) 시뮬레이션으로 분석 및 확인되었습니다. [1] 조영증강 X선 마이크로 컴퓨터 단층촬영(micro CT)은 설치류 뇌를 고해상도로 시각화할 수 있는 새로운 고감도 영상 기술입니다. [2] nan [3]
Ray Micro Ct 레이 마이크로 CT
X-Ray micro CT image showed new micro-cracks propagated from rough surface during hydro-shearing at 130°C, which could contribute to the fracture permeability during post-hydro-shearing stage of the specimen. [1] Here, a unique approach by combining X-ray micro CT with HRXRD for a holistic evaluation of silicon-to-sapphire wafer-bonding processes and correlate the micrometer scale and volumetric defect detection (voids and cracks) with atomic-level strain and defect analysis is presented. [2] By modelling permeability and tortuosity in the digitised 3D structure obtained from 3D X-ray micro CT analysis of coke samples, preferred pathways were found to be perpendicular to the direction of applied force, i. [3] Further, X-ray micro computed tomography (X-ray micro CT) test on the CFSWed and UwFSWed samples revealed the presence of welding defects (porosity) in the stir zone. [4] NMR spectroscopy and x-ray micro CT images of the samples revealed interesting changes in the pore size distributions of the samples. [5] A unique compression test was carried out on aluminium matrix syntactic foams combined with X-ray micro CT structure analysis, in order to obtain a full reconstruction of the failure process of syntactic foams. [6] The microstructures of these nano-ceramic reinforced metal matrix foams were studied by scanning electron microscopy (SEM) in combination with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and X-ray micro computed tomography (X-ray micro CT). [7] X-ray micro CT has become a popular methodology for the nondestructive analysis of dental tissues and has been used extensively in the amelogenesis field. [8]X-Ray 마이크로 CT 이미지는 130°C에서 수압 전단 동안 거친 표면에서 전파된 새로운 미세 균열을 보여주었으며, 이는 시편의 수압 전단 후 단계에서 파괴 투과성에 기여할 수 있습니다. [1] 여기에서 X선 마이크로 CT와 HRXRD를 결합하여 실리콘-사파이어 웨이퍼 결합 공정의 전체적인 평가를 수행하고 마이크로미터 규모와 체적 결함 감지(공극 및 균열)를 원자 수준의 변형 및 결함 분석과 연관시키는 독특한 접근 방식이 있습니다. 제시된다. [2] nan [3] 또한, CFSWed 및 UwFSWed 샘플에 대한 X선 마이크로 컴퓨터 단층 촬영(X선 마이크로 CT) 테스트는 교반 영역에서 용접 결함(다공성)의 존재를 보여주었습니다. [4] 샘플의 NMR 분광법 및 x-선 마이크로 CT 이미지는 샘플의 기공 크기 분포에서 흥미로운 변화를 보여주었습니다. [5] nan [6] nan [7] nan [8]
Bone Micro Ct
Endpoints evaluated include bone micro CT (femur and spinal column), bone histology (number of osteoclasts and osteoblasts in the femur), and mechanical tests. [1] Bone micro CT (μCT) was quantitated to detect alterations in microarchitecture of femoral condyle subchondral bone. [2]평가된 종점에는 골 미세 CT(대퇴골 및 척주), 골 조직학(대퇴골의 파골 세포 및 조골 세포의 수) 및 기계적 테스트가 포함됩니다. [1] nan [2]
micro ct scan
Micro CT scans of chest were performed to assess the lung metastases. [1] In this paper, we exploit the fact that there are no other generalized cylinders than the chordae in the micro CT scan and we propose a topology-based method for the chordae extraction. [2] Laboratory assessments on PASS comprised mixture volumetrics, deformation resistance, water sensitivity and void structure analysis (using micro CT Scan). [3] To monitor malignant progression, serial micro CT scans with respiratory gating (no contrast) was performed. [4] In addition, an excellent correlation is achieved between the calculated profile of the through-thickness crack and the result of the micro CT scan. [5] Micro CT scan imaging experiments confirmed that gaseous and fluid pore pressure is sufficient to cause particle rearrangement, consolidation, and void formation at relatively low voltages when the electroosmotic pressure approaches its maximum in a medium closed to external flow. [6] Its reliability was assessed against the performance of micro CT scan (µCT) and laser scan techniques (LS). [7] Although necrotic in appearance, external tertiary dentine is evident on a micro CT scan. [8] The present study aims at employing image registration of in-vivo micro CT scans from different time points, and to assess (i) if migration of continuously loaded implants is possible and (ii) migration correlates with the force magnitude. [9] Although necrotic in appearance, external tertiary dentine is evident on a micro CT scan. [10]흉부의 미세 CT 스캔을 수행하여 폐 전이를 평가했습니다. [1] 본 논문에서는 마이크로 CT 스캔에서 현대 외에 일반화된 실린더가 없다는 사실을 이용하여 현대 추출을 위한 토폴로지 기반 방법을 제안한다. [2] PASS에 대한 실험실 평가는 혼합물 체적, 변형 저항, 수분 민감도 및 공극 구조 분석(마이크로 CT 스캔 사용)으로 구성되었습니다. [3] nan [4] nan [5] nan [6] nan [7] nan [8] nan [9] nan [10]
micro ct analysi 마이크로 CT 분석
Also, we used micro CT analysis to build 3D models of the male genitalia and somatic characters of two species of Crassignatha Wunderlich, 1995. [1] The samples taken from these defects after 4 and 8 weeks were analyzed histologically along with micro CT analysis. [2] Massive bone destruction and soft tissue mass formation were observed from the micro CT analysis, suggesting the presence of osteosarcoma. [3] In micro CT analysis, characteristics such a mineralized plate (cervical mineralized diaphragm) in the CEJ area, complex root canal morphologies, a calcified mass inside the pulp chamber, and constricted pulp chamber of crown portion were observed. [4] By modelling permeability and tortuosity in the digitised 3D structure obtained from 3D X-ray micro CT analysis of coke samples, preferred pathways were found to be perpendicular to the direction of applied force, i. [5] Histological analysis of CMV mice confirmed the obliteration of the enamel and ameloblast layer, and micro CT analysis revealed a significant increase in dentin thickness in CMV mice rather than in WT mice (P < 0. [6] METHODS Resected lungs were inflated, frozen, and systematically sampled, generating 33 COPD (n=11 subjects) and 22 control tissue samples (n=3 subjects) for micro CT analysis of terminal bronchiole (TB) (last generation of conducting airways) and emphysema. [7] Micro CT analysis showed faster degradation and accelerated bone formation in EB filled defect. [8] Micro CT analysis and histological results demonstrated that the PLLA scaffolds immobilized with OGP significantly promoted bone regeneration in critical-sized bone defects. [9] Thirty-five days after fracture micro CT analysis showed that diabetes significantly reduced callus volume and bone volume (P < 0. [10]또한 우리는 마이크로 CT 분석을 사용하여 Crassignatha Wunderlich, 1995의 두 종의 남성 생식기 및 체세포 특성의 3D 모델을 구축했습니다. [1] 4주와 8주 후에 이러한 결함에서 채취한 샘플을 마이크로 CT 분석과 함께 조직학적으로 분석했습니다. [2] 미세 CT 분석에서 대규모 뼈 파괴와 연조직 덩어리 형성이 관찰되어 골육종의 존재를 시사했습니다. [3] 마이크로 CT 분석에서 CEJ 부위의 광물화된 판(경부 광물화된 횡격막), 복잡한 근관 형태, 치수강 내부의 석회화 덩어리, 치관 부분의 수축된 치수강과 같은 특성이 관찰되었습니다. [4] nan [5] CMV 생쥐의 조직학적 분석은 법랑질과 법랑모세포층의 소멸을 확인했으며, 마이크로 CT 분석은 WT 생쥐보다 CMV 생쥐에서 상아질 두께의 유의한 증가를 보여주었습니다(P < 0. [6] 행동 양식 절제된 폐를 팽창, 동결 및 체계적으로 샘플링하여 말단 세기관지(TB)(전도성 기도의 마지막 세대) 및 폐기종의 미세 CT 분석을 위해 33개의 COPD(n=11명의 대상체) 및 22개의 대조군 조직 샘플(n=3명의 대상체)을 생성했습니다. . [7] nan [8] nan [9] nan [10]
micro ct scanning 마이크로 CT 스캐닝
In this study, combining a microfluidic chip test and a micro CT scanning test on tight rocks, the occurrence state of fluids in microscale pores is experimentally investigated. [1] The Zhang group wrote a comprehensive, welldesigned paper on development an osteoarthritis animal model using many methods including animal surgery, tissue and cell cultures, H&E, Masson’s trichrome, safranin O/fast green, enzyme histochemical and immunofluorescence staining, Micro CT scanning, and two molecular methods. [2] Specimens were decoronated and root length was standardized for micro CT scanning before root canal preparation done. [3] The pore throat structure characteristics of Paleogene tight sandstone and sandy conglomerate in the Jiyang depression are studied using cast thin section, conventional mercury injection, constant rate mercury injection and micro CT scanning data, and a reservoir classification scheme based on pore throat structure parameters is established. [4] Therefore, we used micro CT scanning of a Cepaea nemoralis shell (a common host for nematodes) to 3D visualise encased nematode parasites and quantify morphological parameters. [5] In order to gain detailed insights into the diversity of Amphisorus, we applied micro CT scanning and shotgun metagenomic sequencing. [6] Sixteen fresh frozen shoulder specimens were used for perfusion and micro CT scanning. [7] The ability of new HA/ZrO2 gradient biocomposites to repair bone defects was evaluated by micro CT scanning, biomechanical testing, ink staining and toluidine blue staining 12 weeks after operation. [8]본 연구에서는 촘촘한 암석에 대한 미세유체 칩 테스트와 마이크로 CT 스캐닝 테스트를 결합하여 미세 기공에서 유체의 발생 상태를 실험적으로 조사했습니다. [1] Zhang 그룹은 동물 수술, 조직 및 세포 배양, H&E, Masson's trichrome, safranin O/fast green, 효소 조직화학 및 면역형광 염색, Micro CT 스캐닝, 분자 방법. [2] 근관 준비가 완료되기 전에 표본을 장식하고 근관 길이를 미세 CT 스캔을 위해 표준화했습니다. [3] 지양 함몰 지역의 Paleogene 빽빽한 사암 및 사암 역암의 기공 인후 구조 특성을 주조 박편, 재래식 수은 주입, 일정 비율 수은 주입 및 마이크로 CT 스캐닝 데이터를 사용하여 연구하고, 기공 인후 구조 매개변수를 기반으로 한 저수지 분류 체계 수립 . [4] 따라서 우리는 Cepaea nemoralis shell(선충류의 일반적인 숙주)의 마이크로 CT 스캐닝을 사용하여 3D로 둘러싸인 선충류 기생충을 시각화하고 형태학적 매개변수를 정량화했습니다. [5] nan [6] 16개의 신선 냉동 어깨 표본을 관류 및 마이크로 CT 스캔에 사용했습니다. [7] 뼈 결함을 복구하는 새로운 HA/ZrO2 구배 생체 복합재의 능력은 수술 12주 후 마이크로 CT 스캔, 생체역학 테스트, 잉크 염색 및 톨루이딘 블루 염색에 의해 평가되었습니다. [8]
micro ct image 마이크로 CT 이미지
X-Ray micro CT image showed new micro-cracks propagated from rough surface during hydro-shearing at 130°C, which could contribute to the fracture permeability during post-hydro-shearing stage of the specimen. [1] 89) between POM contents determined by the segmentation of micro CT images and CO2 emissions from the incubation experiment. [2] The fiber splay and fiber orientation of the sclera collagen were determined experimentally, and the thickness across the scleral globe was determined using micro CT images. [3] Micro CT images confirmed the higher embolism ratio in cultivated vs. [4] NMR spectroscopy and x-ray micro CT images of the samples revealed interesting changes in the pore size distributions of the samples. [5]X-Ray 마이크로 CT 이미지는 130°C에서 수압 전단 동안 거친 표면에서 전파된 새로운 미세 균열을 보여주었으며, 이는 시편의 수압 전단 후 단계에서 파괴 투과성에 기여할 수 있습니다. [1] 89) 마이크로 CT 영상의 분할에 의해 결정된 POM 함량과 배양 실험의 CO<sub>2</sub> 방출 사이. [2] 공막 콜라겐의 섬유 확장 및 섬유 배향은 실험적으로 결정되었으며 공막 구의 두께는 마이크로 CT 이미지를 사용하여 결정되었습니다. [3] Micro CT 이미지는 배양된 대 균에서 더 높은 색전증 비율을 확인했습니다. [4] 샘플의 NMR 분광법 및 x-선 마이크로 CT 이미지는 샘플의 기공 크기 분포에서 흥미로운 변화를 보여주었습니다. [5]
micro ct scanner
We used a micro CT scanner for image acquisition, and the subsequent development of cortical bone was examined by texture analysis based on the statistical distribution of gray-scale intensities in which seven essential parameters were extracted from the micro CT images. [1] In 2010, a high‐resolution micro CT scanner became available, large enough to scan the entire nondissected head of the arterially injected cats. [2] Compared with the Micro CT scanner, the THz system also has the advantage that even larger objects can be examined. [3] Each sample was scanned with a micro-computed tomography (uCT) scanner (Biomedical Micro CT Scanner, Scanco Medical, Switzerland) to quantify bone volume/total volume ratio (BV/TV), trabecular thickness, trabecular separation, trabecular number, and connectivity density. [4]영상 획득을 위해 마이크로 CT 스캐너를 사용하였고, 마이크로 CT 영상에서 7개의 필수 파라미터를 추출한 회색조 강도의 통계적 분포를 기반으로 하는 텍스처 분석을 통해 피질골의 후속 발달을 조사했습니다. [1] 2010년에는 동맥 주사된 고양이의 해부되지 않은 머리 전체를 스캔할 수 있는 고해상도 마이크로 CT 스캐너가 출시되었습니다. [2] nan [3] nan [4]
micro ct imaging
Micro CT imaging technology is recently explored for textile material inspection. [1] Objective To evaluate the radiosensitization effect and micro CT imaging of multifunctional gold nanoparticles in lung adenocarcinoma A549 tumor-bearing mouse models. [2] Micro CT imaging with a high resolution of 20 microns was performed to observe the roots and canals according to specific criteria. [3]Micro CT 이미징 기술은 최근 섬유 소재 검사를 위해 연구되고 있습니다. [1] 목적 폐 선암종 A549 종양 보유 마우스 모델에서 다기능 금 나노 입자의 방사선 감작 효과 및 마이크로 CT 영상을 평가하기 위해. [2] 특정 기준에 따라 근관과 근관을 관찰하기 위해 20마이크론의 고해상도 마이크로 CT 영상을 수행했습니다. [3]
micro ct system
The contrast generation of AuNP of different sizes was investigated with three clinical CT, a spectral photon counting CT (SPCCT) and two micro CT systems. [1] Animals were survived for 1-month post-treatment and the livers were explanted and scanned on a micro CT system to fully characterize the microscopic distribution of individual microspheres. [2]크기가 다른 AuNP의 대비 생성은 3개의 임상 CT, 스펙트럼 광자 계수 CT(SPCCT) 및 2개의 마이크로 CT 시스템으로 조사되었습니다. [1] 동물은 치료 후 1개월 동안 생존했으며 간을 이식하고 마이크로 CT 시스템에서 스캔하여 개별 마이크로스피어의 미세한 분포를 완전히 특성화했습니다. [2]
micro ct analysis
Micro CT analyses showed that the callus volume at the restricted drill hole site in tibiae was significantly less in ERαΔOb/ΔOb compared to ERαf/f mice only at day 14 but not at day 10. [1] In this descriptive study, we aim to chronologically observe tooth eruption and root formation of mouse PFE molars through 3D-micro CT analyses. [2]마이크로 CT 분석은 경골의 제한된 드릴 구멍 부위에서 캘러스 부피가 14일에만 ERαf/f 마우스에 비해 ERαΔOb/ΔOb에서 유의하게 적었지만 10일에는 그렇지 않은 것으로 나타났습니다. [1] nan [2]
micro ct showed
Micro CT showed that C-discs had much denser microstructures and less number/depth of microcracks as a result of high pressure. [1] In silico generated 3D images gathered by micro CT showed pulmonary vasculature distributed throughout the lung, which was representative of the shape and structure of the lungs. [2]Micro CT는 C-디스크가 고압의 결과로 훨씬 더 조밀한 미세 구조와 더 적은 수/깊이의 미세 균열을 가짐을 보여주었습니다. [1] nan [2]