Isothermal Kinetic(등온 운동)란 무엇입니까?
Isothermal Kinetic 등온 운동 - The variation in the non-isothermal kinetic behavior of CO2 caused by pressure differed from that of H2O because of the difference between chemisorption and physisorption. [1] The isothermal kinetics of curing was described by means of model fitting and the isoconversional approach (Friedman method). [2] The non-isothermal kinetic method was used in this manuscript to obtain the reaction models by fitting the reduction ratio of low-grade phosphate ore and the volatilization ratio of phosphorus. [3] Several mathematical models were investigated, but the more suitable models for optimization purposes seem to be those based on a nonisothermal kinetic model. [4] A systematic non-isothermal kinetic study was accomplished to evaluate the kinetic parameters of the thermogravimetric curves. [5] 84O2 were studied at different heating rates with the thermal analysis (TG-DTA) and non-isothermal kinetic analysis. [6] Isothermal kinetics and thermodynamic properties were also evaluated to explain the sorption mechanism. [7] The Jeziorny-modified Avrami’s model, Ozawa’s model, and Mo’s model were applied to analysis the non-isothermal kinetics, and Kissinger theory was used to calculate the activation energies of non-isothermal crystallization. [8] It is found that non-isothermal kinetics without and with DEAM capture the intra-particle temperature distribution. [9] However, the isothermal kinetics study (at 45 °C) revealed the reduction in the degree of crystallinity of bio-composites, and the axialite formation was visualized via POM. [10] 9°C, the decomposition process is exothermic reaction, the melting point is about 140°C, the non-isothermal kinetic equation is ln(β/T p 2 )=-17652 (1/T p)+28. [11] Simultaneously, non-isothermal kinetic analysis manifested that the combustion of blends followed random pore model (RPM), and therefore, the parameters calculated by RPM were more accurate to describe their combustion behavior. [12] The experimental isothermal kinetic curves for Fe48Co32P14B6 glass measured in the temperature range 683 to 714 K have been analyzed with using the analytical equation derived as a combination of the integral form of Kolmogorov’s equation of mass crystallization kinetics and the Kashchiev’s transient nucleation model. [13] The experimentally resolved TG curves were analyzed using the formal kinetic calculation methods based on isoconversional and isothermal kinetic relationships. [14] The exponential temperature change in nonisothermal kinetic analysis is usually used in the experimental investigation of biomass pyrolysis kinetics. [15] Apparent activation energy E was obtained by two non-isothermal kinetic analysis methods (Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose). [16] The effects of high-basicity pellet on smelting chromium-bearing vanadia-titania magnetite are investigated via thermodynamic smelting and non-isothermal kinetics experiments. [17] By means of gained nonisothermal kinetic results, the forecasting of kinetic curves in isothermal as well as nonisothermal conditions was performed. [18] The non-isothermal kinetics parameters were calculated by the Kissinger’s method, Ozawa’s method and Starink’s method, respectively. [19] The non – isothermal kinetics was performed by using Kissenger, Boswell, Ozawa and Starink methods known as model – free methods. [20] The development of instrumentation has allowed thermal analysis to become a widely used method not only in calorimetry but also in the field of non-isothermal kinetics that, however, provides a simplified philosophy of measurements. [21] Further, based on a non-isothermal kinetic equation, the structure of the experimental function is given. [22] Through thermodynamic smelting experiments, nonisothermal and isothermal kinetics experiments, the effects of CO2–containing gas injection on the smelting of chromia–bearing vanadiferous titanomagnetite ore were investigated. [23] We apply this method to in situ investigate the isothermal kinetics of insulin fibrillation at two clinical concentrations at 74 °C for 18 h. [24] The occurrence of non-isothermal kinetics of CO2 flowing in the porous coal media might have some impacts on the pore structure and matrix integrity. [25] This study examined the non-isothermal kinetics of the slow pyrolysis of Imperata Cylindrica (IC). [26] Finally, based on the testing results, a new non-isothermal kinetic model of phase transformation are proposed to introduce the effect of the austenite deformation on transformation during the continuous cooling. [27] In this study, the non-isothermal kinetics of the martensitic transition from 14M modulated martensite to austenite phase in Ni55Fe19Ga26 ribbons obtained by melt-spinning has been analyzed. [28] Isothermal kinetics of the exchange of absorbed water in a silica hydrogel (SH) with ethanol was examined. [29] Isoconversional approach could be recommended as more realistic and precise for modeling non-isothermal kinetics of lignocellulosic residues compared to model-fitting approach. [30] The common isothermal kinetics models for grain growth are listed, which is followed by the critical discussion on the simplifications and the commonly used methods for the determination of grain growth exponent (n) and activation energy (Q). [31] In this study, the effect of the addition of Na2CO3 on the isothermal kinetics of carbothermic reduction of low-grade ilmenite concentrate is studied; this is a novel technique for obtaining high-quality upgraded titanium slag for chlorination through semi-molten states. [32] Moreover, soot-temperature programmed reduction, isothermal kinetic study, and density functional theory calculation provided supplementary support for the enhancement effect of Ag-Co3O4 combination in the activation and utilization of surface-adsorbed oxygen. [33] Non-isothermal kinetics of the thermal decomposition was achieved based on DSC experiments under different heating rates, showing an observable melting process which could only be observed from the chlorodinitromethyl group based energetic structure under high the heating rates. [34] The kinetic parameters of the curing process, such as activation energy ( Ea), pre-exponential factor ( A), and rate constant ( k) were determined using several non-isothermal kinetic methods: Kissinger-Akahira-Sunose (KAS), Kissinger, Straink, Flynn-Wall-Ozawa (OFW), and Bosewell. [35] The non-isothermal kinetics of pyrolysis and combustion processes under the heating rates of 10, 15 and 20 °C/min were studied by the improved Coats-Redfern method. [36] Non-isothermal kinetic parameters of the pyrolysis process of Tectona grandis were evaluated with different model-fitting methods. [37] The improved non-isothermal kinetics method was proposed by introducing the function of mechanisms, the activation energies and pre-exponential factors were estimated iteratively by regression to enhance modeling accuracy. [38] In this communication, a computational tool of predicting nonisothermal kinetics is presented. [39] The steam gasification and chemical looping gasification (CLG) of lignite and rice husk with oxygen uncoupling over 5% NiO/CuO oxygen carrier were conducted by non-isothermal kinetics method in a fixed-bed reactor. [40] From the calculated non-isothermal kinetic parameters, both catalysts could reduce activation energies. [41] The optimum operating conditions could be established based on the results of a thermal analysis of the CER, a nonisothermal kinetic analysis, a numerical modeling study of a plug flow reactor (PFR)-type combustor, and a thermodynamic equilibrium analysis of a system consisting of a mix of carbonized CER and halogenation gas. [42] Non-isothermal kinetics made it possible to determine the best fit (n-dimensional nucleation according to Avrami–Erofeev followed by two competitive processes: nth order with autocatalysis by-product and reaction of nth order). [43] The efficient and high yielding acid-base and Organosolv methods were studied for cellulose isolation from date palm lignocellulose waste biomass and thereafter analyzed for nonisothermal kinetic and thermodynamic parameter determination using model-free methods. [44] Thermodynamic and non-isothermal kinetic study of TiO2 powders were estimated. [45]압력에 의한 CO2의 비등온 운동 거동의 변화는 화학 흡착과 물리 흡착의 차이로 인해 H2O의 것과 다릅니다. [1] 경화의 등온 동역학은 모델 피팅 및 등변환 접근(Friedman 방법)을 통해 설명되었습니다. [2] 이 원고에서는 비등온 운동법을 사용하여 저품위 인광석의 환원율과 인의 휘발율을 피팅하여 반응 모델을 얻었다. [3] 여러 수학적 모델이 조사되었지만 최적화 목적에 더 적합한 모델은 비등온 운동 모델을 기반으로 하는 모델인 것 같습니다. [4] 열중량 곡선의 운동 매개변수를 평가하기 위해 체계적인 비등온 운동 연구를 수행했습니다. [5] 84O2는 열 분석(TG-DTA) 및 비등온 운동 분석을 통해 다양한 가열 속도에서 연구되었습니다. [6] 수착 메커니즘을 설명하기 위해 등온 동역학 및 열역학적 특성도 평가되었습니다. [7] Jeziorny-modified Avrami's model, Ozawa's model, Mo's model은 non-isothermal kinetics 해석에 적용되었고, Kissinger 이론은 non-isothermal crystallization의 활성화 에너지를 계산하는데 사용되었다. [8] DEAM이 있거나 없는 비등온 동역학은 입자 내 온도 분포를 포착하는 것으로 밝혀졌습니다. [9] 그러나 등온 동역학 연구(45°C에서)는 바이오 복합재의 결정화 정도의 감소를 나타내었고 축석 형성은 POM을 통해 가시화되었습니다. [10] 9°C, 분해 과정은 발열 반응, 융점은 약 140°C, 비등온 운동 방정식은 ln(β/Tp2)=-17652(1/Tp)+28입니다. [11] 동시에, 비등온 운동 분석은 블렌드의 연소가 무작위 기공 모델(RPM)을 따랐고, 따라서 RPM에 의해 계산된 매개변수가 연소 거동을 설명하는 데 더 정확함을 나타냈습니다. [12] 683~714K의 온도 범위에서 측정된 Fe48Co32P14B6 유리에 대한 실험적 등온 운동 곡선은 Kolmogorov의 질량 결정화 역학 방정식과 Kashchiev의 과도 핵 생성 모델의 조합으로 파생된 분석 방정식을 사용하여 분석되었습니다. [13] 실험적으로 해결된 TG 곡선은 등변환 및 등온 운동 관계를 기반으로 하는 공식 운동 계산 방법을 사용하여 분석되었습니다. [14] 비등온 동역학 분석의 지수 온도 변화는 일반적으로 바이오매스 열분해 동역학의 실험적 조사에 사용됩니다. [15] 겉보기 활성화 에너지 E는 두 가지 비등온 운동 분석 방법(Flynn-Wall-Ozawa 및 Kissinger-Akahira-Sunose)에 의해 얻어졌습니다. [16] 크롬 함유 바나디아-티타니아 자철광 제련에 대한 고염기성 펠릿의 효과는 열역학 제련 및 비등온 동역학 실험을 통해 조사되었습니다. [17] 얻은 비등온 운동학적 결과를 통해 등온 및 비등온 조건에서의 운동 곡선 예측이 수행되었습니다. [18] 비등온 동역학 매개변수는 각각 Kissinger 방법, Ozawa 방법 및 Starink 방법으로 계산되었습니다. [19] 비등온 동역학은 모델이 없는 방법으로 알려진 Kissenger, Boswell, Ozawa 및 Starink 방법을 사용하여 수행되었습니다. [20] 기기의 발달로 열분석은 열량계뿐만 아니라 비등온 동역학 분야에서도 널리 사용되는 방법이 되었지만 측정의 단순화된 철학을 제공합니다. [21] 또한, 비등온 운동방정식에 기초하여 실험함수의 구조를 제시하였다. [22] 열역학적 제련 실험, 비등온 및 등온 동역학 실험을 통해 크로미아 함유 바나디페러스 티타노자철광 광석의 제련에 대한 CO2 함유 가스 주입의 영향을 조사했습니다. [23] 우리는 이 방법을 적용하여 18시간 동안 74°C에서 두 가지 임상 농도에서 인슐린 세동의 등온 동역학을 조사합니다. [24] 다공성 석탄 매체에서 흐르는 CO2의 비등온 동역학의 발생은 기공 구조와 매트릭스 무결성에 약간의 영향을 미칠 수 있습니다. [25] 이 연구는 Imperata Cylindrica(IC)의 느린 열분해의 비등온 동역학을 조사했습니다. [26] 마지막으로, 시험 결과에 기초하여 연속 냉각 동안 변태에 대한 오스테나이트 변형의 영향을 도입하기 위해 상변태의 새로운 비등온 운동학적 모델이 제안되었습니다. [27] 이 연구에서는 용융 방사에 의해 얻은 Ni55Fe19Ga26 리본에서 14M 변조 마르텐사이트에서 오스테나이트 상으로의 마르텐사이트 전이의 비등온 동역학을 분석했습니다. [28] 실리카 하이드로겔에서 흡수된 물 교환의 등온 동역학 (SH) 에탄올을 조사했습니다. [29] Isoconversional 접근법은 모델 피팅 접근법과 비교하여 목질계 잔류물의 비등온 동역학을 모델링하는 데 더 현실적이고 정확한 것으로 권장될 수 있습니다. [30] 결정립 성장에 대한 일반적인 등온 동역학 모델이 나열되고 그 뒤에 결정립 성장 지수(n) 및 활성화 에너지(Q)를 결정하기 위해 일반적으로 사용되는 방법과 단순화에 대한 비판적 논의가 이어집니다. [31] 이 연구에서, 저등급 일메나이트 정광의 탄소열 환원의 등온 동역학에 대한 Na2CO3 첨가의 효과가 연구되었습니다. 이것은 반용융 상태를 통해 염소화를 위한 고품질의 업그레이드된 티타늄 슬래그를 얻는 새로운 기술입니다. [32] 더욱이, 그을음-온도 프로그래밍된 환원, 등온 운동 연구 및 밀도 함수 이론 계산은 표면 흡착 산소의 활성화 및 이용에서 Ag-Co3O4 조합의 향상 효과에 대한 보충 지원을 제공했습니다. [33] 열분해의 비등온 동역학은 다른 가열 속도에서 DSC 실험을 기반으로 달성되었으며, 높은 가열 속도에서 클로로디니트로메틸 그룹 기반 에너지 구조에서만 관찰할 수 있는 관찰 가능한 용융 과정을 보여줍니다. [34] 활성화 에너지(Ea), 사전 지수 인자(A) 및 속도 상수(k)와 같은 경화 공정의 운동 매개변수는 여러 비등온 운동 방법을 사용하여 결정되었습니다. Kissinger-Akahira-Sunose(KAS), Kissinger , Straink, Flynn-Wall-Ozawa(OFW) 및 Bosewell. [35] 10, 15 및 20 °C/min의 가열 속도에서 열분해 및 연소 과정의 비등온 동역학을 개선된 Coats-Redfern 방법으로 연구했습니다. [36] Tectona grandis의 열분해 과정의 비등온 운동 매개변수는 다양한 모델 피팅 방법으로 평가되었습니다. [37] 개선된 비등온 동역학 방법은 메커니즘의 기능을 도입하여 제안되었으며 모델링 정확도를 향상시키기 위해 회귀를 통해 활성화 에너지 및 사전 지수 인자를 반복적으로 추정했습니다. [38] 이 커뮤니케이션에서는 비등온 역학을 예측하는 계산 도구가 제공됩니다. [39] 갈탄과 왕겨의 5% NiO/CuO 산소 담체에서 분리된 산소와 증기 가스화 및 화학적 순환 가스화(CLG)는 고정층 반응기에서 비등온 동역학 방법으로 수행되었습니다. [40] 계산된 비등온 운동 매개변수에서 두 촉매 모두 활성화 에너지를 줄일 수 있습니다. [41] CER의 열해석, 비등온 동역학해석, PFR(Plug Flow Reactor)형 연소기의 수치 모델링 연구, 탄화된 CER과 할로겐화 가스의 혼합. [42] 비등온 동역학을 통해 최적의 적합성을 결정할 수 있었습니다(Avrami-Erofeev에 따른 n차원 핵형성 후 두 가지 경쟁 프로세스: 자가촉매 부산물이 있는 n차 및 n차 반응). [43] 대추야자 리그노셀룰로오스 폐기물 바이오매스에서 셀룰로오스 분리를 위해 효율적이고 고수율의 산-염기 및 Organosolv 방법을 연구한 후 모델이 없는 방법을 사용하여 비등온 운동 및 열역학적 매개변수 결정에 대해 분석했습니다. [44] TiO2 분말의 열역학 및 비등온 동역학 연구를 추정했습니다. [45]
isothermal kinetic analysi
84O2 were studied at different heating rates with the thermal analysis (TG-DTA) and non-isothermal kinetic analysis. [1] Simultaneously, non-isothermal kinetic analysis manifested that the combustion of blends followed random pore model (RPM), and therefore, the parameters calculated by RPM were more accurate to describe their combustion behavior. [2] The exponential temperature change in nonisothermal kinetic analysis is usually used in the experimental investigation of biomass pyrolysis kinetics. [3] Apparent activation energy E was obtained by two non-isothermal kinetic analysis methods (Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose). [4] The optimum operating conditions could be established based on the results of a thermal analysis of the CER, a nonisothermal kinetic analysis, a numerical modeling study of a plug flow reactor (PFR)-type combustor, and a thermodynamic equilibrium analysis of a system consisting of a mix of carbonized CER and halogenation gas. [5]84O2는 열 분석(TG-DTA) 및 비등온 운동 분석을 통해 다양한 가열 속도에서 연구되었습니다. [1] 동시에, 비등온 운동 분석은 블렌드의 연소가 무작위 기공 모델(RPM)을 따랐고, 따라서 RPM에 의해 계산된 매개변수가 연소 거동을 설명하는 데 더 정확함을 나타냈습니다. [2] 비등온 동역학 분석의 지수 온도 변화는 일반적으로 바이오매스 열분해 동역학의 실험적 조사에 사용됩니다. [3] 겉보기 활성화 에너지 E는 두 가지 비등온 운동 분석 방법(Flynn-Wall-Ozawa 및 Kissinger-Akahira-Sunose)에 의해 얻어졌습니다. [4] CER의 열해석, 비등온 동역학해석, PFR(Plug Flow Reactor)형 연소기의 수치 모델링 연구, 탄화된 CER과 할로겐화 가스의 혼합. [5]
isothermal kinetic study
A systematic non-isothermal kinetic study was accomplished to evaluate the kinetic parameters of the thermogravimetric curves. [1] Moreover, soot-temperature programmed reduction, isothermal kinetic study, and density functional theory calculation provided supplementary support for the enhancement effect of Ag-Co3O4 combination in the activation and utilization of surface-adsorbed oxygen. [2] Thermodynamic and non-isothermal kinetic study of TiO2 powders were estimated. [3]열중량 곡선의 운동 매개변수를 평가하기 위해 체계적인 비등온 운동 연구를 수행했습니다. [1] 더욱이, 그을음-온도 프로그래밍된 환원, 등온 운동 연구 및 밀도 함수 이론 계산은 표면 흡착 산소의 활성화 및 이용에서 Ag-Co3O4 조합의 향상 효과에 대한 보충 지원을 제공했습니다. [2] TiO2 분말의 열역학 및 비등온 동역학 연구를 추정했습니다. [3]
isothermal kinetic method
The non-isothermal kinetic method was used in this manuscript to obtain the reaction models by fitting the reduction ratio of low-grade phosphate ore and the volatilization ratio of phosphorus. [1] The kinetic parameters of the curing process, such as activation energy ( Ea), pre-exponential factor ( A), and rate constant ( k) were determined using several non-isothermal kinetic methods: Kissinger-Akahira-Sunose (KAS), Kissinger, Straink, Flynn-Wall-Ozawa (OFW), and Bosewell. [2]이 원고에서는 비등온 운동법을 사용하여 저품위 인광석의 환원율과 인의 휘발율을 피팅하여 반응 모델을 얻었다. [1] 활성화 에너지(Ea), 사전 지수 인자(A) 및 속도 상수(k)와 같은 경화 공정의 운동 매개변수는 여러 비등온 운동 방법을 사용하여 결정되었습니다. Kissinger-Akahira-Sunose(KAS), Kissinger , Straink, Flynn-Wall-Ozawa(OFW) 및 Bosewell. [2]
isothermal kinetic model
Several mathematical models were investigated, but the more suitable models for optimization purposes seem to be those based on a nonisothermal kinetic model. [1] Finally, based on the testing results, a new non-isothermal kinetic model of phase transformation are proposed to introduce the effect of the austenite deformation on transformation during the continuous cooling. [2]여러 수학적 모델이 조사되었지만 최적화 목적에 더 적합한 모델은 비등온 운동 모델을 기반으로 하는 모델인 것 같습니다. [1] 마지막으로, 시험 결과에 기초하여 연속 냉각 동안 변태에 대한 오스테나이트 변형의 영향을 도입하기 위해 상변태의 새로운 비등온 운동학적 모델이 제안되었습니다. [2]
isothermal kinetic equation
9°C, the decomposition process is exothermic reaction, the melting point is about 140°C, the non-isothermal kinetic equation is ln(β/T p 2 )=-17652 (1/T p)+28. [1] Further, based on a non-isothermal kinetic equation, the structure of the experimental function is given. [2]9°C, 분해 과정은 발열 반응, 융점은 약 140°C, 비등온 운동 방정식은 ln(β/Tp2)=-17652(1/Tp)+28입니다. [1] 또한, 비등온 운동방정식에 기초하여 실험함수의 구조를 제시하였다. [2]
isothermal kinetic parameter
Non-isothermal kinetic parameters of the pyrolysis process of Tectona grandis were evaluated with different model-fitting methods. [1] From the calculated non-isothermal kinetic parameters, both catalysts could reduce activation energies. [2]Tectona grandis의 열분해 과정의 비등온 운동 매개변수는 다양한 모델 피팅 방법으로 평가되었습니다. [1] 계산된 비등온 운동 매개변수에서 두 촉매 모두 활성화 에너지를 줄일 수 있습니다. [2]