Instrumental Analysis(기기 분석)란 무엇입니까?
Instrumental Analysis 기기 분석 - The result of instrumental analysis using GC. [1] The data acquisition and treatment include sample pre-treatment, instrumental analysis and raw data conversion. [2] Specifically, MOFs have been regarded as promising materials in instrumental analysis of food contamination via separation and extraction of target analytes based on their high surface area with high adsorption capacity. [3] A multi-instrumental analysis of the lightning events producing transient current “spikes” on the electrodes revealed a significant bias towards large peak currents exceeding 100 kA, but only a minor dependence on the impulse charge moment change for those associated with the sprites. [4] Multi-instrumental analysis (rheometry, calorimetry, microscopy, colorimetry) and sensory (spreadability, mouthfeel) evaluation were used for characterization of textural properties of the CHS preparations. [5] The results for instrumental analysis, proximate composition, and sensory acceptance of the lamb meat were similar among the treatments. [6] , lauryl and laureth sulfates) during instrumental analysis. [7] Since none of the patients confirmed VA intake, instrumental analysis was the basis for the definitive diagnosis of VA poisoning. [8] We compile recent information on the production/usage and physicochemical properties of OPEs and discussed and compared the available sample treatment and analysis techniques of OPEs, including extraction, clean-up, and instrumental analysis. [9] Besides, the available reviews focusing on levels of OUVFs in aqueous systems (freshwater and marine), instrumental analysis from various samples, and specific toxicity effects, compiled information on the ecotoxicity of OUVFs is currently lacking. [10] We subsequently investigated the relationship between their biodegradability via clear-zone formation and BOD-biodegradation testing and their physical properties, including their structural characteristics, using instrumental analysis. [11] Atomic absorption spectrometry is the core content of instrumental analysis and also one of the most commonly used skills in modern detection positions. [12] This novel material has significant development potential in the fields of micro-liquid transportation, instrumental analysis, environmental protection, and energy storage. [13] We investigated the physicochemical properties of the SBM and Pd/SBM catalysts by instrumental analysis. [14] Dynamic mechanical analysis (DMA) and instrumental analysis of the texture were the method used in experiments. [15] Instrumental analysis, sensory analysis, and comprehensive statistical analysis were performed to explain the relationship between aroma and odorants in clam soup. [16] Even so, the comparison between the standard questionnaire about intermaxillary relation and the video captured is highly variable and somewhat confusing, presenting some analysis limitations, giving us a clear notion that we need another mean of instrumental analysis about the intermaxillary position of the surfers. [17] Instrumental analysis of the target chemicals was performed using gas chromatography (GC) or liquid chromatography (LC) coupled with mass spectrometry (MS) or tandem mass spectrometry (MS/MS). [18] Sample pretreatment can not only increase the concentration of trace targets in the sample, but also effectively eliminate interference from the sample matrix in instrumental analysis. [19] Spectrochemistry is the instrumental analysis of substances with light pulses. [20] Passive equilibrium sampling of chemical mixtures from different human post-mortem tissues (liver, brain (cerebrum and cerebellum), adipose tissue) and blood was combined with instrumental analysis using direct sample introduction (DSI) GC-MS/MS and bioanalytical profiling using in vitro bioassays targeting the activation of the aryl hydrocarbon receptor (AhR-CALUX), the adaptive stress response (AREc32) and cytotoxicity. [21] Instrumental analysis of RNA can focus on the modified residues and reveal the function of these epitranscriptomic marks. [22] By chemical extractions and instrumental analysis, this study illustrated an occluding effect for P extraction after pyrolysis, caused by the dehydration and crystallization of sludge Fe-oxides. [23] In this review, analytical methods are comprehensively summarized in terms of sample preparation strategy and instrumental analysis. [24] According to the practical demand of oilfield, instrumental analysis, physical simulation and reservoir engineering theory are applied for the experimental study on the influence of polymer concentration on the seepage characteristic of polymer solution, molecular coil dimension D h and its distribution, oil displacement effect, besides, an analysis is made on the enhanced oil recovery mechanism by compound polymer flooding with broad relative molecular mass distribution. [25] GC-MS is superior or at least equivalent to LC-MS method and derivatization is not required prior to instrumental analysis. [26] HCBD was thermally desorbed and re-concentrated in a trap and finally transferred for instrumental analysis. [27] However, an instrumental analysis of the evolution of social functioning and behaviour problems has scarcely been explored. [28] In this study, the removal efficiencies of eight typical EDCs at two domestic WWTPs in Dongguan City, China, are reported based on instrumental analysis and bioassay results. [29] For purification of the urine extract prior to instrumental analysis, high-speed centrifugation was used to minimize interference. [30] One of the significant challenges in microorganism exploration is sample preparation prior to instrumental analysis, which involves extraction and clean-up processes. [31] It is imperative to perform effective sample preparation prior to instrumental analysis. [32] The instrumental analysis was carried out using Gas Chromatography-Electron Capture Detector (GC-ECD). [33] Instrumental analysis was performed using gas chromatography coupled to a triple quadrupole mass spectrometer (GC-MS/MS). [34] Furthermore, comparisons between E-nose and traditional instrumental assessment methods, such as sensory evaluation, physical and chemical indicators, instrumental analysis, are made. [35] Based on instrumental analysis and sensory evaluation, 22 compounds were identified as the key aroma compounds and eight of these were evaluated as the most important aroma contributors of Xinjiang dried figs, including heptanal, nonanal, linalool, benzyl benzoate, styrene, eugenol, 2-methoxy-4-vinylphenol, and vanillin. [36] SS-SLS is an advanced spectroscopic method with significant potential to aid academia and industry in studies of chemo-sensing, photocatalysis, optoelectronic materials, applied surface science, development of instrumental analysis, and studies of mechanisms of surface and "bulk" chemical reactions. [37] For the instrumental analysis, a Vanquish UPLC system coupled to a Q-Exactive Plus HRMS device was used for metabolite analysis and accurate mass measurement. [38] These works include the validation of several sampling techniques, sample preparation procedures, and instrumental analysis. [39] In this study, the UPM particle size and composition were detected via instrumental analysis. [40] Both compounds are difficult to detect, and their pretreatment for instrumental analysis are complicated and time-consuming. [41]GC를 이용한 기기분석 결과. [1] 데이터 수집 및 처리에는 샘플 전처리, 기기 분석 및 원시 데이터 변환이 포함됩니다. [2] 특히 MOF는 높은 흡착 능력과 높은 표면적을 기반으로 대상 분석 물질의 분리 및 추출을 통한 식품 오염의 도구 분석에서 유망한 재료로 간주되었습니다. [3] 전극에서 과도 전류 "스파이크"를 생성하는 낙뢰 이벤트에 대한 다중 기기 분석은 100kA를 초과하는 큰 피크 전류에 대한 상당한 바이어스를 나타내었지만 스프라이트와 관련된 임펄스 전하 모멘트 변화에 대한 의존성은 미미했습니다. [4] 다중 기기 분석(유변 측정, 열량 측정, 현미경, 비색) 및 감각(확산성, 식감) 평가를 CHS 제제의 조직 특성 특성화에 사용했습니다. [5] 양고기의 도구적 분석, 근접 구성, 관능 수용도에 대한 결과는 처리구 간에 유사하였다. [6] , 라우릴 및 라우레스 설페이트) 기기 분석 중. [7] 환자 중 누구도 VA 섭취를 확인하지 않았기 때문에 도구 분석은 VA 중독의 최종 진단을 위한 기초였습니다. [8] 우리는 OPE의 생산/용도 및 이화학적 특성에 대한 최근 정보를 수집하고 추출, 정화 및 기기 분석을 포함하여 OPE의 사용 가능한 샘플 처리 및 분석 기술을 논의하고 비교했습니다. [9] 게다가, 수성 시스템(담수 및 해양)의 OUVF 수준, 다양한 샘플의 기기 분석, 특정 독성 영향에 초점을 맞춘 이용 가능한 리뷰, OUVF의 생태독성에 대한 수집된 정보는 현재 부족합니다. [10] 우리는 이후 기기 분석을 사용하여 투명 영역 형성과 BOD 생분해 테스트를 통한 생분해성 및 구조적 특성을 포함한 물리적 특성 사이의 관계를 조사했습니다. [11] 원자 흡수 분광법은 기기 분석의 핵심 내용이며 현대 탐지 위치에서 가장 일반적으로 사용되는 기술 중 하나입니다. [12] 이 새로운 재료는 미세 액체 운송, 기기 분석, 환경 보호 및 에너지 저장 분야에서 상당한 개발 잠재력을 가지고 있습니다. [13] 기기 분석을 통해 SBM 및 Pd/SBM 촉매의 물리화학적 특성을 조사했습니다. [14] 동적 기계적 분석(DMA) 및 질감의 도구적 분석이 실험에 사용된 방법입니다. [15] 조개탕의 향과 냄새의 관계를 설명하기 위해 기기분석, 관능분석, 종합통계분석을 실시하였다. [16] 그럼에도 불구하고, 악간 관계에 대한 표준 설문지와 캡처된 비디오 간의 비교는 매우 다양하고 다소 혼란스러워 일부 분석 한계를 제시하여 서퍼의 악간 위치에 대한 도구 분석의 또 다른 수단이 필요하다는 명확한 개념을 제공합니다. [17] 대상 화학 물질의 기기 분석은 기체 크로마토그래피(GC) 또는 액체 크로마토그래피(LC)와 질량 분석(MS) 또는 탠덤 질량 분석(MS/MS)을 결합하여 수행했습니다. [18] 시료 전처리는 시료의 미량 표적 농도를 증가시킬 뿐만 아니라 기기 분석에서 시료 매트릭스의 간섭을 효과적으로 제거할 수 있습니다. [19] 분광화학은 광 펄스로 물질을 도구로 분석하는 것입니다. [20] 다양한 인간 사후 조직(간, 뇌(대뇌 및 소뇌), 지방 조직) 및 혈액의 화학 혼합물의 수동 평형 샘플링을 직접 시료 도입(DSI) GC-MS/MS 및 아릴 탄화수소 수용체(AhR-CALUX), 적응 스트레스 반응(AREc32) 및 세포독성의 활성화를 표적으로 하는 시험관내 생물검정. [21] RNA의 기기 분석은 변형된 잔기에 초점을 맞추고 이러한 epitranscriptomic 표시의 기능을 밝힐 수 있습니다. [22] 화학적 추출 및 기기 분석을 통해 본 연구는 슬러지 Fe-산화물의 탈수 및 결정화로 인한 열분해 후 인 추출에 대한 폐색 효과를 설명했습니다. [23] 이 검토에서 분석 방법은 시료 준비 전략 및 도구 분석 측면에서 포괄적으로 요약됩니다. [24] 유전의 실제 수요에 따라 고분자 용액의 침투 특성, 분자 코일 치수 D h 및 분포, 오일 변위 효과, 게다가, 광범위한 상대 분자 질량 분포를 갖는 복합 중합체 범람에 의한 향상된 오일 회수 메커니즘에 대한 분석이 이루어집니다. [25] GC-MS는 LC-MS 방법보다 우수하거나 적어도 동등하며 기기 분석 전에 유도체화가 필요하지 않습니다. [26] HCBD는 트랩에서 열적으로 탈착되고 재농축되었으며 최종적으로 기기 분석을 위해 옮겨졌습니다. [27] 그러나 사회적 기능 및 행동 문제의 진화에 대한 도구적 분석은 거의 탐구되지 않았습니다. [28] 이 연구에서는 중국 둥관시에 있는 2개의 국내 WWTP에서 8개의 전형적인 EDC의 제거 효율이 기기 분석 및 생물학적 분석 결과를 기반으로 보고되었습니다. [29] 기기 분석에 앞서 소변 추출물의 정제를 위해 고속 원심분리를 사용하여 간섭을 최소화했습니다. [30] 미생물 탐사에서 중요한 문제 중 하나는 추출 및 정화 과정을 포함하는 기기 분석에 앞서 시료를 준비하는 것입니다. [31] 기기 분석에 앞서 효과적인 샘플 준비를 수행하는 것이 필수적입니다. [32] 기기 분석은 GC-ECD(Gas Chromatography-Electron Capture Detector)를 사용하여 수행되었습니다. [33] 기기 분석은 삼중 사중극자 질량 분석기(GC-MS/MS)에 연결된 가스 크로마토그래피를 사용하여 수행되었습니다. [34] 또한 관능 평가, 물리적 및 화학적 지표, 도구 분석과 같은 전통적인 도구 평가 방법과 전자 코를 비교합니다. [35] 기기 분석 및 관능 평가를 기반으로 하여 22개의 화합물이 주요 향 화합물로 확인되었으며 이 중 8개는 헵타날, 노난알, 리날로올, 벤질 벤조에이트, 스티렌, 유제놀, 메톡시-4-비닐페놀, 및 바닐린. [36] SS-SLS는 화학 감지, 광촉매, 광전자 재료, 응용 표면 과학, 기기 분석 개발, 표면 및 "대량" 화학 반응의 메커니즘 연구에 대한 연구에서 학계와 산업계를 지원할 수 있는 상당한 잠재력을 가진 고급 분광법입니다. [37] 기기 분석을 위해 Q-Exactive Plus HRMS 장치와 결합된 Vanquish UPLC 시스템을 대사 산물 분석 및 정확한 질량 측정에 사용했습니다. [38] 이러한 작업에는 여러 샘플링 기술의 검증, 샘플 준비 절차 및 도구 분석이 포함됩니다. [39] 이 연구에서 UPM 입자 크기와 구성은 기기 분석을 통해 감지되었습니다. [40] 두 화합물 모두 검출하기 어렵고 기기 분석을 위한 전처리 과정이 복잡하고 시간이 많이 걸립니다. [41]
scanning electron microscopy 주사 전자 현미경
Instrumental analysis of polymers and composites was carried out using UV–visible spectroscopy, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical thermal analysis and scanning electron microscopy. [1] Different analytical and instrumental analysis techniques were used to characterize both liquid and solid samples including acid base titration, Atomic Absorption Spectrometry (AAS), X-ray Diffraction analysis (XRD), Thermogravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM). [2] The physicochemical properties of as-synthesized nanoparticles were characterized by X-ray diffraction, scanning electron microscopy, vibrating sample magnetometer, transmission electron microscopy, N2 adsorption–desorption, and Fourier transform infrared spectroscopy instrumental analysis. [3] Instrumental analysis of polymers and composites was carried out using Fourier Transform Infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). [4] Instrumental analysis of x-ray diffraction, scanning electron microscopy, gas sorption analysis, and Fourier transform infrared spectroscopy were employed. [5]고분자 및 복합 재료의 기기 분석은 UV-가시광선 분광법, 열중량 분석, 시차 주사 열량계, 동적 기계적 열 분석 및 주사 전자 현미경을 사용하여 수행되었습니다. [1] 산 염기 적정, AAS(Atomic Absorption Spectrometry), XRD(X-ray Diffraction analysis), TGA(Thermogravimetric Analysis) 및 SEM(Scanning Electron Microscopy)을 포함한 액체 및 고체 샘플을 특성화하기 위해 다양한 분석 및 기기 분석 기술이 사용되었습니다. [2] nan [3] nan [4] nan [5]
high performance liquid 고성능 액체
3 g of freeze-dried sample aliquot followed by a preconcentration step by compact solid phase extraction (c-SPE) and subsequent instrumental analysis by ultra-high-performance-liquid-chromatography (UHPLC) coupled to mass spectrometry in tandem (MS/MS) by a triple quadrupole, was successfully validated as a very sensitive (method limit of quantification in the low ng g-1) and reliable method (relative recoveries around 100% and method repeatability featured by a general relative standard deviation below 20%). [1] Instrumental analysis was performed by high-performance liquid chromatography. [2] Instrumental analysis was performed by high-performance liquid chromatography. [3] Quantitative instrumental analysis was implemented with gas chromatography-mass spectrometry and high-performance liquid chromatography. [4]3g의 동결 건조된 샘플 분취량에 이어 소형 고체상 추출(c-SPE)에 의한 사전 농축 단계 및 직렬 질량 분석법(MS/MS)과 결합된 초고성능 액체 크로마토그래피(UHPLC)에 의한 후속 기기 분석 )는 삼중 사중극자에 의해 매우 민감하고(낮은 ng g-1에서 정량화의 방법 한계) 신뢰할 수 있는 방법(약 100%의 상대 회수율 및 20% 미만의 일반 상대 표준 편차를 특징으로 하는 방법 반복성)으로 성공적으로 검증되었습니다. [1] 기기 분석은 고성능 액체 크로마토그래피로 수행했습니다. [2] nan [3] nan [4]
performance liquid chromatography 고성능 액체 크로마토그래피
Instrumental analysis was completed in 5 min using the ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). [1]기기 분석은 초고성능 액체 크로마토그래피-탠덤 질량 분석기(UHPLC-MS/MS)를 사용하여 5분 만에 완료되었습니다. [1]
Different Instrumental Analysis 다른 기기 분석
The function of different instrumental analysis techniques and factors affecting the chemical composition of postbiotics were also comprehensively reviewed. [1] Thus, a different instrumental analysis was used to interpret the internal composition and heterostructure of the SSC nanoparticles. [2] The structural characterization of silver nanoparticles and the modified membrane were determined by different instrumental analysis. [3] The changing in the performance and physicochemical properties of TFN membranes incorporating with superhydrophilic nanoparticles were investigated by different instrumental analysis and were compared with a pristine TFC membrane. [4] The surface, morphological mineralogical and physico-chemical properties of zeolites are studied by different instrumental analysis techniques. [5]다양한 도구 분석 기술의 기능과 포스트바이오틱스의 화학적 구성에 영향을 미치는 요인도 종합적으로 검토되었습니다. [1] 따라서, SSC 나노입자의 내부 조성과 이종 구조를 해석하기 위해 다른 도구 분석이 사용되었습니다. [2] nan [3] nan [4] nan [5]
Variou Instrumental Analysis 다양한 기기 분석
To improve photocatalytic efficiency, graphene/TiO2 nanocomposites are prepared by a sol-gel assisted electrospray method and characterized by various instrumental analysis methods. [1] The survey manifested the utilities of the environmentally friendly biosynthesis methods via extracting different plant species, some of its important physicochemical properties, various instrumental analysis characterization tools, and potential applications. [2] The surface modification was confirmed through various instrumental analysis like CHNO elemental analyzer, FTIR, TGA/DSC, BET, SEM and EDX. [3] The target copolymers CCP1–5 were isolated in excellent yield and characterized by various instrumental analysis techniques. [4]광촉매 효율을 향상시키기 위해 그래핀/TiO2 나노복합체는 졸-겔 보조 전기분무 방법으로 제조되며 다양한 기기 분석 방법을 특징으로 합니다. [1] 이 조사는 다양한 식물 종 추출, 일부 중요한 물리화학적 특성, 다양한 도구 분석 특성화 도구 및 잠재적 응용을 통해 환경 친화적인 생합성 방법의 유용성을 나타냈습니다. [2] nan [3] nan [4]
Subsequent Instrumental Analysis 후속 기기 분석
The preparation of samples, including extraction and cleanup and the subsequent instrumental analysis of ECs, are all covered. [1] Toxicological analysis was completed by protein precipitation with methanol and subsequent instrumental analysis by LC/MS/MS in negative ion mode. [2] 3 g of freeze-dried sample aliquot followed by a preconcentration step by compact solid phase extraction (c-SPE) and subsequent instrumental analysis by ultra-high-performance-liquid-chromatography (UHPLC) coupled to mass spectrometry in tandem (MS/MS) by a triple quadrupole, was successfully validated as a very sensitive (method limit of quantification in the low ng g-1) and reliable method (relative recoveries around 100% and method repeatability featured by a general relative standard deviation below 20%). [3]추출 및 정리와 EC의 후속 기기 분석을 포함한 샘플 준비가 모두 포함됩니다. [1] 독성 분석은 메탄올을 사용한 단백질 침전 및 음이온 모드에서 LC/MS/MS에 의한 후속 기기 분석에 의해 완료되었습니다. [2] 3g의 동결 건조된 샘플 분취량에 이어 소형 고체상 추출(c-SPE)에 의한 사전 농축 단계 및 직렬 질량 분석법(MS/MS)과 결합된 초고성능 액체 크로마토그래피(UHPLC)에 의한 후속 기기 분석 )는 삼중 사중극자에 의해 매우 민감하고(낮은 ng g-1에서 정량화의 방법 한계) 신뢰할 수 있는 방법(약 100%의 상대 회수율 및 20% 미만의 일반 상대 표준 편차를 특징으로 하는 방법 반복성)으로 성공적으로 검증되었습니다. [3]
Advanced Instrumental Analysis 고급 기기 분석
The products were analyzed by the use of various advanced instrumental analysis techniques, and their useful properties were tested by different appropriate methods. [1] Using advanced instrumental analysis, like EPR, 1H NMR and FT-IR spectroscopy it has been found that clear-cutting, alters C cycling and accelerates decomposition in the forest floor leading to loss of humic fractions in the investigated soils. [2]다양한 첨단 기기 분석 기술을 사용하여 제품을 분석하고 다양한 적절한 방법으로 유용한 특성을 테스트했습니다. [1] EPR, 1H NMR 및 FT-IR과 같은 고급 기기 분석 사용 분광학에서 명확하게 절단하고 C 사이클링을 변경하고 부식질의 손실로 이어지는 산림 바닥의 분해를 가속화합니다. 조사된 토양의 분수. [2]
instrumental analysis technique 기기 분석 기법
The function of different instrumental analysis techniques and factors affecting the chemical composition of postbiotics were also comprehensively reviewed. [1] Finally, recent technologies for evaluation of 3D printed products including low field nuclear magnetic resonance (LF-NMR), computer numerical simulation, applied reference material, morphological identification, and some novel instrumental analysis techniques are highlighted. [2] The products were analyzed by the use of various advanced instrumental analysis techniques, and their useful properties were tested by different appropriate methods. [3] Different analytical and instrumental analysis techniques were used to characterize both liquid and solid samples including acid base titration, Atomic Absorption Spectrometry (AAS), X-ray Diffraction analysis (XRD), Thermogravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM). [4] Inductively coupled plasma mass spectrometry (ICP-MS) is a sensitive instrumental analysis technique used for multielemental and isotopic determination. [5] The target copolymers CCP1–5 were isolated in excellent yield and characterized by various instrumental analysis techniques. [6] Therefore, the quantity and purity of the substances in pharmaceutical compounds are continuously monitored during drug manufacturing with various chemical or instrumental analysis techniques. [7] The potent odorants in raw and cooked TS were identified by combined sensory and instrumental analysis techniques, including sensory descriptive aroma profiling and two complimentary volatile isolation methods combined with gas chromatography-olfactometry (GC-O) techniques. [8] The surface, morphological mineralogical and physico-chemical properties of zeolites are studied by different instrumental analysis techniques. [9] Al-rich alloys prepared by milling and melting were characterized by a range of instrumental analysis techniques and employed for hydrolytic hydrogen production. [10]다양한 도구 분석 기술의 기능과 포스트바이오틱스의 화학적 구성에 영향을 미치는 요인도 종합적으로 검토되었습니다. [1] 마지막으로 LF-NMR(Low Field Nuclear Magnetic Resonance), 컴퓨터 수치 시뮬레이션, 응용 참조 물질, 형태 식별 및 일부 새로운 기기 분석 기술을 포함한 3D 인쇄 제품 평가를 위한 최신 기술을 강조합니다. [2] 다양한 첨단 기기 분석 기술을 사용하여 제품을 분석하고 다양한 적절한 방법으로 유용한 특성을 테스트했습니다. [3] 산 염기 적정, AAS(Atomic Absorption Spectrometry), XRD(X-ray Diffraction analysis), TGA(Thermogravimetric Analysis) 및 SEM(Scanning Electron Microscopy)을 포함한 액체 및 고체 샘플을 특성화하기 위해 다양한 분석 및 기기 분석 기술이 사용되었습니다. [4] nan [5] nan [6] nan [7] nan [8] nan [9] nan [10]
instrumental analysis method 기기 분석 방법
Along with the atomic scale evaluation of synthetic treatments in positioning the aluminum, cases of instrumental analysis methods and their verification with simulations is discussed, demonstrating how theories have complemented and, sometimes modified, experimental perspectives. [1] In the last step, the produced gel tips were characterized using analytical and instrumental analysis methods, and a suitable pen was designed and produced to gel tips. [2] To improve photocatalytic efficiency, graphene/TiO2 nanocomposites are prepared by a sol-gel assisted electrospray method and characterized by various instrumental analysis methods. [3] Compared to instrumental analysis methods that use complicated experimental and data analysis techniques-such as mass spectrometry, nuclear magnetic resonance (NMR), spectrophotometric methods, and chromatography-electrochemical sensors show promise for use in a wide range of real-time and in situ applications such as pharmaceutical testing, environmental monitoring, and medical diagnostics. [4] These results indicate that it is necessary to establish a modern instrumental analysis method to evaluate and control elemental impurities in CaCO3 raw materials and preparations. [5] The main instrumental analysis method is LC-MS. [6]알루미늄을 배치할 때 합성 처리의 원자 규모 평가와 함께 기기 분석 방법의 사례와 시뮬레이션을 통한 검증이 논의되어 이론이 실험적 관점을 보완하고 때로는 수정하는 방법을 보여줍니다. [1] 마지막 단계에서는 생산된 겔 팁을 분석 및 기기 분석 방법을 사용하여 특성화하고 겔 팁에 적합한 펜을 설계 및 생산했습니다. [2] 광촉매 효율을 향상시키기 위해 그래핀/TiO2 나노복합체는 졸-겔 보조 전기분무 방법으로 제조되며 다양한 기기 분석 방법을 특징으로 합니다. [3] nan [4] nan [5] nan [6]
instrumental analysis revealed
Moreover, instrumental analysis revealed that the incorporation of MPCM leads to loosening of dense microstructure in cement paste matrix and alters the rate of cement hydration to large extent as the formation of hydrated products like C-S-H and C-H decreases with the increase in the dosage of MPCM. [1] Instrumental analysis revealed that the ultra-thin and conformal nature of the shell allowed the core-shell NPs to simultaneously exploit the photocatalytic properties of ZnO and the plasmonic properties of Ag. [2]더욱이, 기기 분석은 MPCM의 혼입으로 인해 시멘트 페이스트 매트릭스의 조밀한 미세조직이 느슨해지며, MPCM의 투여량이 증가함에 따라 C-S-H 및 C-H와 같은 수화된 생성물의 형성이 감소함에 따라 시멘트 수화 속도를 크게 변화시키는 것으로 나타났습니다. [1] nan [2]
instrumental analysis course
Another approach involves two experiments suitable for an instrumental analysis course. [1] With the goal of increasing instrumental use in the undergraduate chemistry laboratory, we have devised a quantitative FTIR experiment to be used in instrumental analysis courses. [2]또 다른 접근 방식은 도구 분석 과정에 적합한 두 가지 실험을 포함합니다. [1] nan [2]
instrumental analysis showed
The matrix effects of the instrumental analysis showed that triflumezopyrim was less susceptible to matrices. [1] Instrumental analysis showed that the homogenous microstructured THs are comprised of iron oxide, silica oxide, and alumina as major components. [2]도구 분석의 매트릭스 효과는 트리플루메조피림이 매트릭스에 덜 민감한 것으로 나타났습니다. [1] nan [2]
instrumental analysis experiment 기기 분석 실험
Aiming at solving the problems of students’ low participation and poor teaching effect in the traditional teaching of instrumental analysis experiment, the self-designed instrumental analysis experiment with students as the main body is proposed in this paper. [1] In this article, we presented the teaching design of project-based CDIO (Conceive-Design-Implement-Operate) approach of instrumental analysis experiment course and investigated the effects of the CDIO teaching method on student attitudes, student performance and teacher development. [2]본 논문에서는 전통적인 도구분석 실험 교수법에서 학생들의 낮은 참여도와 낮은 교수효과의 문제를 해결하기 위해 학생들을 주체로 하는 자체 설계한 도구분석 실험을 제안한다. [1] 이 글에서 우리는 도구 분석 실험 과정의 프로젝트 기반 CDIO(Conceive-Design-Implement-Operate) 접근 방식의 교수 설계를 제시하고 CDIO 교수법이 학생의 태도, 학생의 수행 및 교사 개발에 미치는 영향을 조사했습니다. [2]
instrumental analysis suggest 도구 분석 제안
Our multi-instrumental analysis suggests that fragments of the highly porous boulders are mixed within the surface regolith globally, implying that they might be captured within collected samples by touch-down operations10,11. [1] The instrumental analysis suggests that the low-frequency interaural level differences are enhanced without hindering the provided intelligibility. [2]우리의 다중 기기 분석은 고도로 다공성인 바위 조각이 전 세계적으로 표면 표토 내에서 혼합되어 터치다운 작업에 의해 수집된 샘플 내에서 포착될 수 있음을 암시합니다10,11. [1] 도구적 분석은 제공된 명료도를 방해하지 않으면서 저주파 귀간 레벨 차이가 향상됨을 시사합니다. [2]