Inclined Jet(경사 제트)란 무엇입니까?
Inclined Jet 경사 제트 - To reach our goal, a finite volume method is adopted to reproduce experimental data relative to three isothermal and 60°-inclined jets, placed three diameters apart, sent at a given height from the wind tunnel ground and discharged from similar elliptical cross-sections, under different injection ratios. [1] Electrochemical cutting using tube electrode with inclined holes is a machining method that directly and obliquely injects electrolyte into the machining gap through inclined jet-flow holes on the sidewall of a tube electrode, allowing the electrochemical cutting of a workpiece. [2] Although the effect of the inclined jet on penetration depth is better than that of the vertical jet, the vertical jet can produce a wider penetrate width. [3] Previous investigations revealed that the backward-inclined jet in crossflow exhibits seemingly lower transverse velocity and turbulence intensity at inclination angles higher than a critical value about 25°, thus resulting in significantly low jet fluid dispersion properties. [4] It starts with a summary of the results accessed for normal and inclined jets impinging on flat plates, then the interactive mechanisms between impinging jets and the launch platform or the deflector system, together with relevant factors that affect the flowfield and noise. [5] This approach is demonstrated using a cylindrical and inclined jet in crossflow with three distinct velocity ratios, r = 1 , r = 1. [6] ) are closer to the inlet section (x=0) than those of inclined jets in paper by Wang et al. [7] To understand the mechanism of heat transfer, the current study uses large eddy simulation (LES) method to investigate the heat transfer coefficient of inclined jets in crossflow. [8]우리의 목표를 달성하기 위해 유한 체적 방법을 채택하여 3개의 직경으로 떨어져 배치된 3개의 등온 및 60° 경사 제트에 대한 실험 데이터를 재현하고, 풍동 지면에서 주어진 높이로 보내지고 유사한 타원형 단면에서 방출됩니다. 다른 주입 비율에서. [1] 경사 구멍이 있는 관전극을 이용한 전기화학적 절단은 관전극 측벽에 있는 경사진 제트류 구멍을 통해 가공 간극에 전해액을 직접 비스듬히 주입하여 공작물의 전기화학적 절단이 가능한 가공 방법입니다. [2] 침투 깊이에 대한 경사 제트의 효과는 수직 제트의 효과보다 낫지만 수직 제트는 더 넓은 침투 폭을 생성할 수 있습니다. [3] 이전 조사에 따르면 교차 흐름에서 후방으로 기울어진 제트는 약 25°의 임계값보다 높은 경사각에서 겉보기에 더 낮은 횡단 속도와 난류 강도를 나타내므로 제트 유체 분산 특성이 상당히 낮습니다. [4] 평판에 충돌하는 일반 및 경사 제트에 대해 액세스한 결과의 요약으로 시작한 다음 충돌 제트와 발사 플랫폼 또는 디플렉터 시스템 간의 상호 작용 메커니즘과 함께 유동장 및 소음에 영향을 미치는 관련 요소에 대한 요약으로 시작합니다. [5] 이 접근 방식은 3가지 고유한 속도 비율인 r = 1 , r = 1인 횡류에서 원통형 및 경사 제트를 사용하여 시연됩니다. [6] ) Wang et al. [7] 열 전달 메커니즘을 이해하기 위해 현재 연구에서는 교차 흐름에서 경사 제트의 열 전달 계수를 조사하기 위해 LES(Large Eddy Simulation) 방법을 사용합니다. [8]