Hydroxyapatite Particle(수산화인회석 입자)란 무엇입니까?
Hydroxyapatite Particle 수산화인회석 입자 - New approach is described to synthesis of biomimetic materials on the basis of hydroxyapatite particles and collagen suspension produced from fish-production wastes. [1] This was achieved by synthesizing scaffold with different amount of hydroxyapatite particles using the solvent casting method and with that done, the scaffolds were soaked in simulated body fluid for 7 and 14 days. [2] Based on the viewpoint of bionics, porous scaffold with well pore structure and uniform dispersion of nano-hydroxyapatite particles was prepared using ethanol as a porogen. [3] In this work, hydroxyapatite particles (Hapf) functionalized by plasma treatment were added to a porous cellulose acetate substrate and to a selective polyamide layer of nanocomposite membranes to evaluate its performance in osmotic processes. [4] In this study, hydroxyapatite particles were obtained by hydrothermal synthesis of cuttlebone and incorporated to cellulose scaffolds to fabricate an osteoconductive composite scaffold for bone regeneration. [5] Therefore, in this study, an alkaline erosion process was employed to eliminate the thin-film polycaprolactone layer to expose the hydroxyapatite particles. [6] ResultsBiomineral-binding liposomes enhanced the binding ability of liposomes with hydroxyapatite particles. [7] In the 3D-printed polycaprolactone/hydroxyapatite composite scaffold, hydroxyapatite particles are usually covered by a thin-film of polycaprolactone because of the rheological characteristics of the extrusion process. [8] In the microstructure of composite cements, the increased amounts of granular or finer needle-like nanohydroxyapatite particles arranged into the form of more separated spherical agglomerates were observed. [9] For this aim, EC-g-PCL nanofibers were obtained with electrospinning, embedded layer-by-layer in alginate solutions containing nano-hydroxyapatite particles, and finally, these constructions were freeze-dried. [10] A model of the structure of these formations is constructed and the possible mechanisms of their nucleation and encapsulation of hydroxyapatite particles in the restricted porous space of the basal membrane of aortic valve demilunes are discussed. [11] Using this technique, we produced a uniform layer of nanohydroxyapatite particles of thickness in the range 200 to 300 nm on two types of scaffolds: a porous β-TCP ceramic scaffold and a 3D-printed scaffold made of PCL fibers. [12] The presence of chitosan played a vital role in the converted the EPD system from hot to cold and acted as a binder between the deposited micro polytheretherketone and Nanohydroxyapatite particles, finally it enhanced the antibacterial effect of the HAp-CH-PEEK systems deposited against tested microorganisms. [13] Hydroxyapatite particles (HAp) have been widely used by many dental implant systems as an implant coating material because of their osteoconductive properties. [14] Firstly, hydroxyapatite particles reacted with hexamethylene diisocyanate and then the terminal group was converted into a primary amine group. [15] For this reason, electrospun fibres with micron and sub-micron diameters were fabricated, along with successful inclusion of hydroxyapatite particles to fabricate stimuli responsive bioactive fibres. [16] This review summarizes recent studies that have used various nanomaterials such as nanoscale zero-valent iron (nZVI), stabilizer-modified nZVI, nano apatite based-materials including nano-hydroxyapatite particles (nHAp) and stabilized nano-chlorapatite (nCLAP), carbon nanotubes (CNTs), and titanium dioxide nanoparticles (TiO2 NPs) for the remediation of heavy metal(loid) contaminated sediments. [17] In this study, Si-substituted nanohydroxyapatite particles (Si-nHap) and silica-based POSS nanocages were used as reinforcements in different polymer layers to mimic a cartilage–bone tissue interface. [18] Therefore stability of nanoparticles in experimental solutions of different pH similar to one in human body is important issue for precise tailoring of the synthesis of hydroxyapatite particles on clay mineral substrate. [19] Several solutions have been proposed for preparing biocompatible scaffolds, combining both natural and synthetic biodegradable polymers mainly with metal nanoparticles, carbon-based nanostructures, and hydroxyapatite particles as filler materials. [20] This review article summarizes data on the effects of hydroxyapatite particles in oral biofilm management. [21] The detailed microstructure analysis showed a significant refinement of the surface texture due to the formation of thin needle-like hydroxyapatite particles on MWCNTs and this effect could be responsible for cytotoxicity of composites. [22] Prior to further processing, the nano-hydroxyapatite particles were annealed at temperatures from 100 °C to 1200 °C to reduce structural and surface absorbed water. [23] 68Ga-BPAMD, prepared using the freeze-dried kit, exhibited adequate serum stability and ∼91% binding with the hydroxyapatite particles. [24] In the non-cornified model, OsteoSense 680EX staining confirmed the presence of nano-hydroxyapatite particles in both the cytoplasm and extracellular matrix of outermost cells, but not in the deeper layers. [25] Cells were incorporated into composite scaffolds containing fibrin and hydroxyapatite particles, which yielded significant increases in acoustic attenuation and heating in response to HIFU compared to fibrin alone. [26] The objective of this study was to evaluate the influence of sterilization on a hybrid coating obtained from a sol composed of alkoxysilane tetraethoxysilane (TEOS) and organoalkoxysilane methyltriethoxysilane (MTES) containing 10% (mass) of hydroxyapatite particles. [27] It is modeled as a hierarchical structure consisting of collagen fibers and hydroxyapatite particles at the lower level. [28] The X-ray diffraction spectrum and the scanning electron micrograph showed that the hydroxyapatite particles are highly crystalline and are needle-liked in shape with diameters between 10 and 20 nm and lengths ranging from 100 to 200 nm. [29] The main objective of this study is to investigate the impact strength and Rockwell hardness of UHMW polyethylene composites reinforced with nano-hydroxyapatite particles fabricated through FSP. [30] Two cohorts (n = 32 patients each) were randomized to receive a rhBMP-2-soaked absorbable collagen sponge (test group), or β-tricalcium phosphate and hydroxyapatite particles (control group) immersed in rhBMP-2, at the implant site. [31] Nanohydroxyapatite particle-containing dentifrices are the newer generation of products which claim to remineralize enamel lesions effectively. [32]어류 생산 폐기물에서 생성된 수산화인회석 입자 및 콜라겐 현탁액을 기반으로 한 생체모방 물질 합성에 대한 새로운 접근 방식이 설명됩니다. [1] 이는 용매주조법을 사용하여 다양한 양의 수산화인회석 입자로 지지체를 합성함으로써 달성되었으며, 이를 통해 지지체를 모의 체액에 7일 및 14일 동안 담가두었습니다. [2] 바이오닉스의 관점에서 에탄올을 포로젠으로 사용하여 나노하이드록시아파타이트 입자의 균일한 분산과 잘 기공 구조를 갖는 다공성 지지체를 제조하였다. [3] 이 작업에서 플라즈마 처리에 의해 기능화된 수산화인회석 입자(Hapf)는 다공성 셀룰로오스 아세테이트 기질과 나노복합막의 선택적 폴리아미드 층에 추가되어 삼투 공정에서 성능을 평가했습니다. [4] 본 연구에서는 갑오징어의 열수 합성에 의해 수산화인회석 입자를 얻고 셀룰로오스 지지체에 결합하여 골 재생을 위한 골전도성 복합 지지체를 제작하였다. [5] 따라서 본 연구에서는 수산화인회석 입자를 노출시키기 위해 박막 폴리카프로락톤 층을 제거하기 위해 알칼리 침식 공정을 사용하였다. [6] 결과생체광물 결합 리포솜은 하이드록시아파타이트 입자와 리포솜의 결합 능력을 향상시켰습니다. [7] 3D 인쇄된 폴리카프로락톤/하이드록시아파타이트 복합 지지체에서 수산화인회석 입자는 압출 공정의 유변학적 특성 때문에 일반적으로 폴리카프로락톤 박막으로 덮여 있습니다. [8] 복합시멘트의 미세구조에서 더 분리된 구형 덩어리의 형태로 배열된 입상 또는 미세한 침상 나노하이드록시아파타이트 입자의 양이 증가하는 것이 관찰되었다. [9] 이를 위해 EC-g-PCL 나노섬유를 전기방사하여 나노 수산화인회석 입자가 포함된 알지네이트 용액에 층별로 매립하고 최종적으로 이러한 구조물을 동결 건조시켰다. [10] 이러한 구조물의 구조 모델이 구성되고 대동맥 판막 기저막의 제한된 다공성 공간에서 수산화인회석 입자의 핵 생성 및 캡슐화의 가능한 메커니즘이 논의됩니다. [11] 이 기술을 사용하여 다공성 β-TCP 세라믹 지지체와 PCL 섬유로 만든 3D 인쇄 지지체의 두 가지 유형의 지지체에서 두께가 200~300nm 범위인 나노하이드록시아파타이트 입자의 균일한 층을 생성했습니다. [12] 키토산의 존재는 EPD 시스템을 고온에서 저온으로 전환하는 데 중요한 역할을 했으며 침착된 마이크로 폴리테테르에테르케톤과 Nanohydroxyapatite 입자 사이의 결합제로 작용하여 최종적으로 시험된 미생물에 대해 침착된 HAp-CH-PEEK 시스템의 항균 효과를 향상시켰습니다. . [13] 수산화인회석 입자(HAp)는 골전도 특성 때문에 많은 치과 임플란트 시스템에서 임플란트 코팅 재료로 널리 사용되었습니다. [14] 먼저, 수산화인회석 입자가 헥사메틸렌 디이소시아네이트와 반응한 후 말단기가 1차 아민기로 전환되었다. [15] 이러한 이유로, 미크론 및 서브미크론 직경의 전기방사 섬유가 제작되었으며, 자극 반응성 생리활성 섬유를 제작하기 위해 수산화인회석 입자가 성공적으로 포함되었습니다. [16] 이 리뷰는 나노크기의 0가철(nZVI), 안정제-변형 nZVI, 나노수산화인회석 입자(nHAp) 및 안정화된 나노염소인회석(nCLAP)을 포함한 나노인회석 기반 물질, 탄소나노튜브와 같은 다양한 나노물질을 사용한 최근 연구를 요약합니다. (CNTs), 중금속(loid) 오염 퇴적물 정화를 위한 이산화티타늄 나노입자(TiO2 NPs). [17] 이 연구에서 Si-치환 나노하이드록시아파타이트 입자(Si-nHap)와 실리카 기반 POSS 나노케이지는 연골-뼈 조직 계면을 모방하기 위해 서로 다른 폴리머 층에서 보강재로 사용되었습니다. [18] 따라서 인체와 유사한 pH가 다른 실험 용액에서 나노 입자의 안정성은 점토 광물 기질에서 수산화 인회석 입자 합성을 정밀하게 조정하는 데 중요한 문제입니다. [19] 천연 및 합성 생분해성 고분자를 주로 금속 나노입자, 탄소 기반 나노구조 및 하이드록시아파타이트 입자와 충전재로 결합하여 생체적합성 스캐폴드를 제조하기 위한 여러 솔루션이 제안되었습니다. [20] 이 리뷰 기사는 구강 생물막 관리에서 수산화인회석 입자의 영향에 대한 데이터를 요약합니다. [21] 상세한 미세구조 분석은 MWCNT에 얇은 침상 수산화인회석 입자의 형성으로 인해 표면 조직의 상당한 개선을 보여주었고 이 효과는 복합재의 세포독성에 책임이 있을 수 있습니다. [22] 추가 처리 전에 나노 하이드록시아파타이트 입자를 100°C ~ 1200°C의 온도에서 어닐링하여 구조적 및 표면 흡수된 물을 줄였습니다. [23] 동결 건조 키트를 사용하여 제조된 68Ga-BPAMD는 적절한 혈청 안정성과 수산화인회석 입자와의 ~91% 결합을 나타냈다. [24] 각질화되지 않은 모델에서 OsteoSense 680EX 염색은 가장 바깥쪽 세포의 세포질과 세포외 기질 모두에서 나노 수산화인회석 입자의 존재를 확인했지만 더 깊은 층에는 존재하지 않았습니다. [25] 세포는 섬유소와 수산화인회석 입자를 포함하는 복합 스캐폴드에 통합되었으며, 이는 섬유소 단독에 비해 HIFU에 대한 응답으로 음향 감쇠 및 가열에 상당한 증가를 가져왔습니다. [26] 이 연구의 목적은 10%(질량)의 수산화인회석 입자를 함유하는 알콕시실란 테트라에톡시실란(TEOS)과 유기알콕시실란 메틸트리에톡시실란(MTES)으로 구성된 졸에서 얻은 하이브리드 코팅에 대한 살균의 영향을 평가하는 것이었습니다. [27] 낮은 수준에서 콜라겐 섬유와 수산화인회석 입자로 구성된 계층적 구조로 모델링됩니다. [28] X-선 회절 스펙트럼과 주사전자현미경 사진은 수산화인회석 입자가 결정성이 높고 직경이 10~20 nm이고 길이가 100~200 nm인 바늘 모양의 입자임을 보여주었다. [29] 본 연구의 주요 목적은 FSP를 통해 제조된 나노 하이드록시아파타이트 입자로 강화된 UHMW 폴리에틸렌 복합재료의 충격강도 및 Rockwell 경도를 조사하는 것이다. [30] 2개 코호트(각각 n=32명의 환자)는 임플란트 부위에서 rhBMP-2에 적신 흡수성 콜라겐 스펀지(시험군) 또는 rhBMP-2에 담근 β-인산삼칼슘 및 수산화인회석 입자(대조군)를 받도록 무작위화되었습니다. [31] 나노하이드록시아파타이트 입자 함유 치약은 법랑질 병변을 효과적으로 재광화한다고 주장하는 차세대 제품입니다. [32]
poly l lactide 폴리 락타이드
5-mm-diameter unsintered hydroxyapatite particles and a poly- l -lactide pin. [1] Screws made from a composite of unsintered hydroxyapatite particles and poly-l-lactide can be used for the treatment. [2] We hypothesized that the stability of composite plates and screws forged from unsintered hydroxyapatite particles and poly-l-lactide (u-HA/PLLA) is comparable to that of standard titanium fixation systems for the reduction of fractures of load-bearing regions of the mandibular body. [3]직경 5mm의 소결되지 않은 수산화인회석 입자와 폴리-1-락타이드 핀. [1] 소결되지 않은 수산화인회석 입자와 폴리-l-락타이드의 합성물로 만든 나사를 치료에 사용할 수 있습니다. [2] nan [3]
medial orbital wall 내측 안와 벽
Purpose: We investigated the feasibility of isolated medial orbital wall fracture reconstruction using an unsintered hydroxyapatite particles/poly L-lactide (u-HA/PLLA) sheet implant with the assistance of intraoperative navigation via the transcaruncular approach. [1] After the emphysema had resolved, the patient's medial orbital wall defect was reconstructed using unsintered hydroxyapatite particles/poly L-lactide via the transcaruncular approach. [2] After the emphysema had resolved, the patient's medial orbital wall defect was reconstructed using unsintered hydroxyapatite particles/poly L-lactide via the transcaruncular approach. [3]목적: 우리는 transcaruncular 접근법을 통한 수술 중 탐색의 도움으로 소결되지 않은 수산화인회석 입자/폴리 L-락타이드(u-HA/PLLA) 시트 임플란트를 사용하여 고립된 안와 내벽 골절 재건의 가능성을 조사했습니다. [1] 폐기종이 해결된 후, 환자의 안와 내벽 결손은 경골 접근법을 통해 소결되지 않은 수산화인회석 입자/폴리 L-락티드를 사용하여 재건되었습니다. [2] 폐기종이 해결된 후, 환자의 안와 내벽 결손은 경골 접근법을 통해 소결되지 않은 수산화인회석 입자/폴리 L-락티드를 사용하여 재건되었습니다. [3]
Unsintered Hydroxyapatite Particle 소결되지 않은 수산화인회석 입자
5-mm-diameter unsintered hydroxyapatite particles and a poly- l -lactide pin. [1] Purpose: We investigated the feasibility of isolated medial orbital wall fracture reconstruction using an unsintered hydroxyapatite particles/poly L-lactide (u-HA/PLLA) sheet implant with the assistance of intraoperative navigation via the transcaruncular approach. [2] Screws made from a composite of unsintered hydroxyapatite particles and poly-l-lactide can be used for the treatment. [3] After the emphysema had resolved, the patient's medial orbital wall defect was reconstructed using unsintered hydroxyapatite particles/poly L-lactide via the transcaruncular approach. [4] After the emphysema had resolved, the patient's medial orbital wall defect was reconstructed using unsintered hydroxyapatite particles/poly L-lactide via the transcaruncular approach. [5] We hypothesized that the stability of composite plates and screws forged from unsintered hydroxyapatite particles and poly-l-lactide (u-HA/PLLA) is comparable to that of standard titanium fixation systems for the reduction of fractures of load-bearing regions of the mandibular body. [6]직경 5mm의 소결되지 않은 수산화인회석 입자와 폴리-1-락타이드 핀. [1] 목적: 우리는 transcaruncular 접근법을 통한 수술 중 탐색의 도움으로 소결되지 않은 수산화인회석 입자/폴리 L-락타이드(u-HA/PLLA) 시트 임플란트를 사용하여 고립된 안와 내벽 골절 재건의 가능성을 조사했습니다. [2] 소결되지 않은 수산화인회석 입자와 폴리-l-락타이드의 합성물로 만든 나사를 치료에 사용할 수 있습니다. [3] 폐기종이 해결된 후, 환자의 안와 내벽 결손은 경골 접근법을 통해 소결되지 않은 수산화인회석 입자/폴리 L-락티드를 사용하여 재건되었습니다. [4] 폐기종이 해결된 후, 환자의 안와 내벽 결손은 경골 접근법을 통해 소결되지 않은 수산화인회석 입자/폴리 L-락티드를 사용하여 재건되었습니다. [5] nan [6]
Nano Hydroxyapatite Particle 나노 수산화인회석 입자
To stimulate the biomineralization process of inorganic nanoparticles in natural bone, bioactive nano hydroxyapatite particles (nHAP) were in situ crystallized into the graphene oxide/chitosan/nHAP (GO/CS/nHAP) scaffold via effective regulation of CS functionalized with GO network matrix and presented a uniform dispersion with nanometer-scale. [1] Nano hydroxyapatite particles (nHA) were applied in two forms to a self-etch resin adhesive: particles were directly added to resin adhesive or silanated before addition. [2]천연 뼈에서 무기 나노 입자의 생체 광물화 과정을 자극하기 위해 생체 활성 나노 하이드록시아파타이트 입자(nHAP)는 GO 네트워크 매트릭스로 기능화된 CS의 효과적인 조절을 통해 그래핀 옥사이드/키토산/nHAP(GO/CS/nHAP) 스캐폴드로 제자리 결정화되었습니다. 나노미터 규모의 균일한 분산을 나타냈다. [1] 나노 하이드록시아파타이트 입자(nHA)는 자가 에칭 수지 접착제에 두 가지 형태로 적용되었습니다. 입자는 수지 접착제에 직접 첨가되거나 첨가 전에 실란화됩니다. [2]