Fire Flame(화염)란 무엇입니까?
Fire Flame 화염 - Substantial influence of fire flame on wind flow aerodynamic characteristics lead to enhancement of wind velocity that may cause considerable damages to buildings in bushfire-prone areas. [1] This study presents an investigation about the effect of fire flame on the punching shear strength of hybrid fiber reinforced concrete flat plates. [2] The distribution of the fire flame at confined space along the strains requires special attention. [3] In this study, the effect of fire flame on the punching shear strength of steel fiber reinforced concrete flat plates was experimentally investigated using nine half-scale specimens with dimensions of 1500×1500 mm and a total thickness of 100 mm. [4] The paper also highlights solutions to two machine learning problems: (1) Binary classification of video frames based on the presence [and absence] of fire flames. [5] It was also reported that major deaths from fire related are from the toxic gases inhalation produced by the fire while the deaths due to fire flames and burning was about one third of the total deaths. [6] Similarly, Geopolymer (GPC) concrete outstands prominently with its distinct properties like improved strength, resistant to acid, fire flames, sulphate, lesser shrinkage and creep. [7] The overall objective of this study is to investigate the effect of the fire flame and air post-fire curing method on the bond, compressive strengths and elastic modulus of self compacted concrete specimens for different curing durations. [8] The article demonstrates a reason for developing a scientifically based method for determining the falling heat steam from a fire flame of an emergency blowout of hydrocarbon fuel for liquid and gaseous product. [9] Conclusion: Being man, married with social support is associated with better self-esteem scores in burn patients hospitalized, mostly, with second-degree burns caused by fire flame in a domestic accident (body area affected: 15%-30%). [10] In this study, an experimental investigation had conducted for six high strength laced reinforced concrete one-way slabs to discover the behavior of laced structural members after being exposed to fire flame (high temperature). [11] It may come either from the main wildfire flames, from burning elements and ornamental vegetation surrounding structures, or from neighboring structures. [12] The test program included thermal tests by using a furnace manufactured for this purpose to expose to high burning temperature (fire flame) nine beams which were loaded with sustaining dead load throughout the burning process. [13] Automated detection of fire flames in videos shot from a surveillance camera is an active research topic, as fire detection must be accurate and fast. [14] Due to the various sizes and shapes of fire flame and smoke, detection using deep learning is not easy. [15]바람의 흐름 공기역학적 특성에 대한 화염의 실질적인 영향은 산불이 발생하기 쉬운 지역의 건물에 상당한 피해를 줄 수 있는 풍속의 향상으로 이어집니다. [1] 본 연구는 복합섬유 철근콘크리트 평판의 펀칭전단강도에 대한 화염의 영향에 대한 조사를 제시한다. [2] 스트레인을 따라 제한된 공간에서 화염의 분포는 특별한 주의가 필요합니다. [3] 본 연구에서는 치수 1500×1500 mm, 총두께 100 mm인 9개의 반규모 시편을 사용하여 강섬유 철근콘크리트 평판의 펀칭 전단강도에 대한 화염의 영향을 실험적으로 조사하였다. [4] 이 논문은 또한 두 가지 기계 학습 문제에 대한 솔루션을 강조합니다. (1) 화염의 존재 [및 부재]를 기반으로 한 비디오 프레임의 이진 분류. [5] 또한 화재로 인한 주요 사망은 화재로 인한 유독 가스 흡입으로 인한 것으로 보고되었으며 화재 화염 및 연소로 인한 사망은 전체 사망자의 약 1/3인 것으로 보고되었습니다. [6] 마찬가지로, Geopolymer(GPC) 콘크리트는 강도 향상, 산, 화염, 황산염에 대한 내성, 수축 및 크리프 감소와 같은 고유한 특성으로 눈에 띄게 두드러집니다. [7] 이 연구의 전반적인 목적은 다양한 양생 기간 동안 자체 압축 콘크리트 시편의 접착, 압축 강도 및 탄성 계수에 대한 화재 화염 및 공기 사후 화재 양생 방법의 영향을 조사하는 것입니다. [8] 이 기사는 액체 및 기체 제품에 대한 탄화수소 연료의 비상 분출의 화재 화염에서 떨어지는 열 증기를 결정하기 위한 과학적 기반 방법을 개발하는 이유를 보여줍니다. [9] 결론: 남성이고 사회적 지지가 있는 결혼은 입원한 화상환자의 자존감 점수가 더 높았고, 대부분 가정사고에서 화염으로 인한 2도 화상(영향을 받는 신체 부위: 15%-30%)과 관련이 있었다. [10] 본 연구에서는 화염(고온)에 노출된 구조부재의 거동을 알아보기 위해 6개의 고강도 엮은 철근콘크리트 단방향 슬래브에 대해 실험적 조사를 수행하였다. [11] 그것은 주요 산불 화염, 불타는 요소 및 구조물 주변의 장식용 식물 또는 이웃 구조물에서 올 수 있습니다. [12] 테스트 프로그램에는 연소 과정 전반에 걸쳐 고정 하중을 받는 9개의 빔에 높은 연소 온도(화염)에 노출시키기 위해 이러한 목적으로 제조된 용광로를 사용하여 열 테스트가 포함되었습니다. [13] 화재 감지는 정확하고 빨라야 하므로 감시 카메라로 촬영한 비디오에서 화재 불꽃을 자동으로 감지하는 것은 활발한 연구 주제입니다. [14] 화염과 연기의 크기와 모양이 다양하기 때문에 딥러닝을 이용한 탐지는 쉽지 않다. [15]
Pool Fire Flame
In addition, the dynamics of fire was found to be complex, involving turbulent mixing of air, kerosene and combustion gases, chemical reactions, ventilation and buoyancy effects, and pool fire flame expansion. [1] The mass loss rate at lower pressure was found to be slower and unique, and relatively stable melting-flowing pool fire flame front was observed. [2] The spectral characteristics of radiation coming from a pool fire flame are numerically obtained. [3] For a thick rod in normal gravity, as the opposed flow increases to 50–100 cm/s, the flame can no longer spread over the fuel surface but stay in the recirculation zone downstream of the cylinder end surface, like a pool fire flame. [4]또한, 화재의 역학은 공기, 등유 및 연소 가스의 난류 혼합, 화학 반응, 환기 및 부력 효과, 수영장 화재 화염 팽창을 포함하는 복잡한 것으로 밝혀졌습니다. [1] 저압에서의 질량손실률은 느리고 독특한 것으로 밝혀졌으며, 상대적으로 안정적인 용융유동 풀 화염전면이 관찰되었다. [2] 수영장 화재 화염에서 나오는 복사의 스펙트럼 특성을 수치적으로 얻습니다. [3] 일반 중력의 두꺼운 막대의 경우 반대 흐름이 50-100cm/s로 증가함에 따라 화염은 더 이상 연료 표면 위로 퍼지지 않고 수영장 화재 불꽃처럼 실린더 끝 표면의 다운스트림 재순환 영역에 머물게 됩니다. [4]
High Fire Flame 높은 불의 불꽃
This paper presents an experimental study to explain the effect of high fire flame temperatures on the behavior of reinforced concrete corbels. [1] The main objective of this study was to assess the damage level in reinforced concrete voided slabs experimentally after exposure to high fire flame. [2]이 논문은 철근 콘크리트 코벨의 거동에 대한 높은 화염 온도의 영향을 설명하기 위한 실험적 연구를 제시합니다. [1] 본 연구의 주요 목적은 철근콘크리트 공극 슬래브의 고화염 노출 후 손상 정도를 실험적으로 평가하는 것이다. [2]
Direct Fire Flame 직화 화염
The objectives of this study include investigating the behavior of the composite prestressed concrete beams under and after the exposure to a direct fire flame, as well as finding their residual load-carrying capacity. [1] This work examines experimentally the performance of RPC and NSC columns subjected to 25% of the ultimate load and exposed to direct fire flame for a period of 30 and 60 min at various temperature levels. [2]이 연구의 목적은 직접 화재 화염에 노출된 후와 노출된 후 합성 프리스트레스 콘크리트 보의 거동을 조사하고 잔류 하중 전달 능력을 찾는 것입니다. [1] 이 연구는 극한 하중의 25%를 받고 다양한 온도 수준에서 30분과 60분 동안 직접 화염에 노출된 RPC 및 NSC 기둥의 성능을 실험적으로 조사합니다. [2]
fire flame exposure 화재 화염 노출
The period of fire flame exposure is one of these factors. [1] This study examines the performance of concrete by predicting the compression, flexural and split-tensile strength after fire flame exposure. [2]화재 화염 노출 기간은 이러한 요인 중 하나입니다. [1] 본 연구에서는 화염 노출 후 압축강도, 휨강도 및 쪼개짐인장강도를 예측하여 콘크리트의 성능을 조사하였다. [2]