Enhanced Ionic(향상된 이온)란 무엇입니까?
Enhanced Ionic 향상된 이온 - The improved electrochemical properties of the Li3V2-xTix (PO4)3/C cathode materials may be attributed to the enhanced ionic and electronic conductivities caused by Ti doping. [1]Li3V2-xTix(PO4)3/C 캐소드 물질의 개선된 전기화학적 특성은 Ti 도핑으로 인한 향상된 이온 및 전자 전도도에 기인할 수 있습니다. [1]
Nanoparticle Enhanced Ionic 나노 입자 강화 이온
Nanoparticle Enhanced Ionic Liquids (NEILs) are the new heat transfer fluids for direct absorption solar collectors and are comprised of small vol/wt percentage of nanoparticles in base ionic liquids (ILs). [1] The properties of the alumina nanoparticles enhanced ionic liquids with respect to the base fluids have been modeled using feed-forward back-propagation (BP) ANNs. [2] In this experimental study, several alumina Nanoparticle Enhanced Ionic Liquids were prepared and studied in regard to their stability, pH, density and thermal conductivity. [3]나노입자 강화 이온 액체(NEIL)는 직접 흡수 태양열 집열기를 위한 새로운 열 전달 유체이며 기본 이온 액체(IL)에 작은 부피/중량%의 나노입자로 구성됩니다. [1] 기본 유체에 대한 알루미나 나노입자 강화 이온성 액체의 특성은 BP(feed-forward back-propagation) ANN을 사용하여 모델링되었습니다. [2] 이 실험 연구에서 여러 알루미나 나노입자 강화 이온성 액체를 준비하고 안정성, pH, 밀도 및 열전도율과 관련하여 연구했습니다. [3]
Exhibit Enhanced Ionic
The composite separator with 60 wt% silicon nitride whiskers exhibits enhanced ionic conductivity of 0. [1] Here, directional freezing is used followed by a solvent replacement method to prepare aligned nanocomposite ionogels which exhibit enhanced ionic conductivity, good mechanical strength, and thermal stability simultaneously. [2]60wt%의 실리콘 질화물 휘스커가 있는 복합 분리막은 0의 향상된 이온 전도도를 나타냅니다. [1] 여기서 방향성 동결은 향상된 이온 전도도, 우수한 기계적 강도 및 열 안정성을 동시에 나타내는 정렬된 나노복합체 이오노겔을 제조하기 위해 용매 대체 방법이 뒤따릅니다. [2]
Present Enhanced Ionic 향상된 이오니아 제시
A ternary composite solid-state electrolyte of PVDF-HFP, LATP and flower-like CeO2 with rich oxygen vacancies is developed for the first time, and it presents enhanced ionic conductivity, high transference number and excellent electrochemical performance at room temperature. [1] The designed CPE-PHCE presents enhanced ionic conductivity and high oxidation stability of >5. [2]PVDF-HFP, LATP 및 꽃 모양의 CeO2의 풍부한 산소 결손을 가진 삼원 복합 고체 전해질은 처음으로 개발되었으며 실온에서 향상된 이온 전도도, 높은 전이수 및 우수한 전기화학적 성능을 나타냅니다. [1] 설계된 CPE-PHCE는 향상된 이온 전도도와 >5의 높은 산화 안정성을 나타냅니다. [2]
enhanced ionic conductivity 향상된 이온 전도도
The resultant NHPC4-700 catalyst exhibits a hierarchical porous structure and high specific area (2404 m2 g−1), which promoted the exposure of enough active sites as well as simultaneously enhanced the electron transfer rate, shorten the mass transfer pathway, enhanced ionic conductivity and carbon wetting. [1] Enhanced ionic conductivity is realized by a composite of LiCoO2–LiFeO2 and Sm3+ doped ceria (SDC) electrolyte in SBFC. [2] Our results suggest that strong fCNT-PVA interactions contribute to the enhanced mechanical strength, while the enhanced ionic conductivity is partly owing to weak Zn adsorption. [3] 15) solid solution showed an enhanced ionic conductivity over ThF4. [4] The effect of better dispersion of the modified nanoparticles in the polymer matrix has been reflected by the enhanced ionic conductivity (at room temperature) of modified SiO2 added electrolyte film (~2. [5] Further investigations in terms of electrical conductivity and electrode polarization, a proton and oxygen ionic co-conducting mechanism, and a mechanism for blocking electron transport showed that the reconstruction of the energy band at the interfaces was responsible for the enhanced ionic conductivity and cell power output. [6] The high discharge capacities and cycling stability in PEO/CMC-Li@PI cell were assigned to the enhanced ionic conductivity by the added CMC-Li derivative and the improved mechanical properties by the PI non-woven fabric skeleton. [7] Composite polymer electrolyte (CPE), derived by compositing inorganic particles into solid polymer electrolyte has become the most practical species for SSLBs because it inherits the advantages of polymer electrolyte and simultaneously achieves enhanced ionic conductivity and mechanical properties. [8] The interaction of the borate anions, particularly [B(CF3)4]−, with the Li+ and Li anode, suggests they are suitable inclusions in high-voltage LMB electrolytes that can stabilise the Li anode surface and provide enhanced ionic conductivity. [9] The enhanced ionic conductivity of glasses compared to their crystalline counterparts has attracted considerable interest for their use in solid-state batteries. [10] In parallel, the homogeneous distribution of inorganic compounds ensures an enhanced ionic conductivity, which leads to a thinner, stable SEI layer by reducing electrolyte consumption and forming less dead lithium. [11] Sc3+-substituted Na3Zr2Si2PO12 ceramic with a refined microstructure shows significantly enhanced ionic conductivity and reduced activation energy. [12] The three-component approach for composite solid polymer electrolytes (SPEs), which relies on the use of one polymer and two complementary fillers, attracted a great interest in recent years, due to the possibility of incorporating different fillers to impart simultaneously distinct properties to the SPEs, such as enhanced ionic conductivity and improved mechanical stability. [13] Aliovalent substitution to create vacancies has further enhanced ionic conductivities of this series of antiperovskites, resulting in Na 2. [14] Based on the surface morphology, FTIR, and transference number measurement, it could be deduced that enhanced ionic conductivity is due to the amorphous nature of hydrogel electrolyte. [15] Anode electrolyte pH adjustment enhanced ionic conductivity and reduced zinc corrosion. [16] A ternary composite solid-state electrolyte of PVDF-HFP, LATP and flower-like CeO2 with rich oxygen vacancies is developed for the first time, and it presents enhanced ionic conductivity, high transference number and excellent electrochemical performance at room temperature. [17] Here, the lightweight transparent ionogel membrane with enhanced ionic conductivity is acted as the electrically conductive region of the sensor. [18] The composite separator with 60 wt% silicon nitride whiskers exhibits enhanced ionic conductivity of 0. [19] The new agro-based ionic polymer using sugarcane extract showed enhanced ionic conductivity, high dielectric constant, and mechanical properties compared to those of the pure PVA due to the sulphur (S), iron (Fe), and bagasse content. [20] The annealed samples exhibited preferential growth and enhanced ionic conductivities. [21] Full cells show enhanced specific capacity at higher C-rates in the presents of additives due to anti–freezing and enhanced ionic conductivity. [22] The constructed long-range conduction pathways with locally concentrated Li+ at PEO-LiDGO interfaces impart HSPE highly enhanced ionic conductivity. [23] The PEO-LiTFSI-10HKUST-1 MOFs electrolyte (PL10HM) has shown enhanced ionic conductivity, which reaches 2. [24] By rigorously quantifying the channel regions in the glass structure, using MD simulations, we demonstrate that the enhanced ionic conductivity can be attributed to the increased connectivity of Na-rich channels because of the increased charge-compensated BOs around the Na atoms. [25] As a result, polymers containing a low salt concentration (3 wt%) display a drastically enhanced ionic conductivity (up to 0. [26] The designed CPE-PHCE presents enhanced ionic conductivity and high oxidation stability of >5. [27] Using the random resistor model, the lithium-ion transport in the composite polymer electrolyte is simulated by the Monte Carlo simulation, demonstrating that the enhanced ionic conductivity can be ascribed to the ionic conduction in the space charge regions and the percolation of the space charge regions. [28] Solid composite polymer electrolytes are the optimal candidate for all solid-state lithium batteries, because of their enhanced ionic conductivities, long-life cycle ability and compatibility to lithium anode. [29] Also, to reduce the recombination of electrons, enhanced ionic conductivity and the stability of the redox this electrolyte is used. [30] Moreover, electrical impedance spectroscopic measurements explained that the enhanced ionic conductivity was due to the morphology and porosity which improved the electrochemical performance of FeVO4 hollow microspheres and proved it as an auspicious anode material for LIBs. [31] 9 wt%), and the most excellent electrochemical performance is also presented by the corresponding GPE: enhanced ionic conductivity of 2. [32] The artificial alloy layer demonstrates an enhanced ionic conductivity that is an order of magnitude higher than that of the pristine solid electrolyte interphase. [33] Here, directional freezing is used followed by a solvent replacement method to prepare aligned nanocomposite ionogels which exhibit enhanced ionic conductivity, good mechanical strength, and thermal stability simultaneously. [34] Incorporating 5 wt% functionalized CNTs into the matrix enhanced ionic conductivity to 42. [35] 557TiO3 (LLTO) nanofibers are incorporated into the CLP matrix to form composite solid electrolytes, achieving enhanced ionic conductivity without showing filler agglomeration. [36] Besides, it is found that the discharge capacities of the single cell increased as the current density rose at 300 °C attributed to the enhanced ionic conductivity at high temperature. [37] Consequently, the SHCPE exhibits an enhanced ionic conductivity of 8. [38] Large Pb2+ ion substitution for calcium results in unit cell expansion with consequent extending of ion migration channels, thus leading to enhanced ionic conductivity in the Pb-rich materials. [39] Nanocomposite polymer electrolytes (CPEs) are promising materials for all-solid-state lithium metal batteries (LMBs) due to their enhanced ionic conductivities and stability to the lithium anode. [40] It is found that the reconstruction of the energy band at interfaces is responsible for such enhanced ionic conductivity and cell power output. [41] Moreover, a novel quasi-solid-state polymer electrolyte (QPE) of porous acrylate rubber/tetraethylammonium tetrafluoroborate-acetonitrile (pACM/Et4NBF4-AN) with enhanced ionic conductivity was prepared to match with π-conjugated polymer electrodes, which helps to restrain the dissolution and the structure degradation of electrodes. [42] To open, fast Li/Na/Mg ionic conductivity in electrolytes with BH4 - groups, approaches to engineering borohydrides with enhanced ionic conductivity, and later on the superionic conductivity of polyhedral borohydrides, their correlated conductive kinetics/thermodynamics, and the theoretically predicted high conductive derivatives are discussed. [43] Meanwhile, the prepared membrane emerged extraordinarily high uptake and preserving retention of liquid electrolyte, and enhanced ionic conductivity. [44] The increase of Sr doping amount in NLSZO and sintering temperature leads to an augment of lattice parameter and densification of SSE, which contributed to an enhanced ionic conductivity. [45] We propose that a faster ionic conductivity path can be formed around the dislocation core due to the coupling of the tensile strain field and dopant segregation, which could account for enhanced ionic conductivity along dislocations. [46] The aim was to produce near-infrared (NIR)-emitting materials with improved thermal and mechanical properties, and enhanced ionic conductivity. [47] Depend on this unique rigid-flexible coupling network, the prepared solid polymer electrolyte shows enhanced ionic conductivity (6. [48] Motivated by the lack of definitive explanation for the experimentally found enhanced ionic conductivity in Sm-doped-CeO2/SrTiO3 VAN films, we determine the structure at vertical interfaces using random structure searching and explore how it can affect ionic conduction. [49]생성된 NHPC4-700 촉매는 계층적 다공성 구조와 높은 비면적(2404 m2 g-1)을 나타내어 충분한 활성 부위의 노출을 촉진함과 동시에 전자 전달 속도를 향상시키고 물질 전달 경로를 단축하며 이온 전도성을 향상시켰습니다. 및 탄소 습윤. [1] 향상된 이온 전도성은 SBFC에서 LiCoO2–LiFeO2 및 Sm3+ 도핑된 세리아(SDC) 전해질의 합성물에 의해 실현됩니다. [2] 우리의 결과는 강한 fCNT-PVA 상호 작용이 향상된 기계적 강도에 기여하는 반면 향상된 이온 전도성은 부분적으로 약한 Zn 흡착으로 인한 것임을 시사합니다. [3] 15) 고용체는 ThF4에 비해 향상된 이온 전도도를 보였다. [4] 폴리머 매트릭스에서 변형된 나노입자의 더 나은 분산의 효과는 변형된 SiO2가 첨가된 전해질 필름(~2.2)의 향상된 이온 전도도(실온에서)에 의해 반영되었습니다. [5] 전기 전도도 및 전극 분극, 양성자와 산소 이온 공동 전도 메커니즘, 전자 수송 차단 메커니즘에 대한 추가 조사는 계면에서 에너지 밴드의 재구성이 향상된 이온 전도도 및 세포 전력 출력에 책임이 있음을 보여주었습니다. . [6] PEO/CMC-Li@PI 전지의 높은 방전 용량과 사이클링 안정성은 첨가된 CMC-Li 유도체에 의한 향상된 이온 전도성과 PI 부직포 골격에 의한 향상된 기계적 물성에 할당되었습니다. [7] 무기물 입자를 고체 고분자 전해질로 합성한 복합 고분자 전해질(Composite Polymer Electrolyte, CPE)은 고분자 전해질의 장점을 계승함과 동시에 향상된 이온 전도도와 기계적 물성을 얻기 때문에 SSLB의 가장 실용적인 종이다. [8] 붕산염 음이온, 특히 [B(CF3)4]-와 Li+ 및 Li 양극의 상호작용은 이들이 Li 양극 표면을 안정화하고 향상된 이온 전도성을 제공할 수 있는 고전압 LMB 전해질에 적합한 개재물임을 시사합니다. [9] 결정질에 비해 유리의 향상된 이온 전도성은 고체 배터리에서의 사용에 대해 상당한 관심을 불러일으켰습니다. [10] 동시에, 무기 화합물의 균일한 분포는 향상된 이온 전도성을 보장하여 전해질 소비를 줄이고 죽은 리튬을 덜 형성함으로써 더 얇고 안정적인 SEI 층으로 이어집니다. [11] 미세구조가 정제된 Sc3+ 치환 Na3Zr2Si2PO12 세라믹은 이온 전도성이 크게 향상되고 활성화 에너지가 감소합니다. [12] 하나의 폴리머와 두 개의 보완 충전제를 사용하는 복합 고체 고분자 전해질(SPE)에 대한 3성분 접근 방식은 서로 다른 충전제를 통합하여 동시에 별개의 특성을 부여할 가능성으로 인해 최근 몇 년 동안 큰 관심을 받았습니다. 향상된 이온 전도성 및 향상된 기계적 안정성과 같은 SPE. [13] 빈자리를 생성하기 위한 이원가 치환은 이 일련의 안티페로브스카이트의 이온 전도도를 더욱 향상시켜 Na 2를 생성합니다. [14] 표면 형태, FTIR 및 전이 수 측정을 기반으로 이온 전도도가 향상된 것은 하이드로겔 전해질의 비정질 특성에 기인한다고 추론할 수 있습니다. [15] 양극 전해질 pH 조정은 이온 전도도를 높이고 아연 부식을 줄였습니다. [16] PVDF-HFP, LATP 및 꽃 모양의 CeO2의 풍부한 산소 결손을 가진 삼원 복합 고체 전해질은 처음으로 개발되었으며 실온에서 향상된 이온 전도도, 높은 전이수 및 우수한 전기화학적 성능을 나타냅니다. [17] 여기에서 이온 전도성이 향상된 경량 투명 이오노겔 멤브레인이 센서의 전기 전도성 영역으로 작용합니다. [18] 60wt%의 실리콘 질화물 휘스커가 있는 복합 분리막은 0의 향상된 이온 전도도를 나타냅니다. [19] 사탕수수 추출물을 이용한 새로운 농업 기반 이온성 고분자는 황(S), 철(Fe), 버개스 함량으로 인해 순수 PVA에 비해 향상된 이온 전도성, 높은 유전 상수 및 기계적 특성을 보였다. [20] 어닐링된 샘플은 우선적인 성장과 향상된 이온 전도도를 나타냈습니다. [21] 전체 전지는 부동액 및 향상된 이온 전도성으로 인해 첨가제가 있는 경우 더 높은 C-rate에서 향상된 비용량을 나타냅니다. [22] PEO-LiDGO 인터페이스에서 국부적으로 집중된 Li+로 구성된 장거리 전도 경로는 HSPE에 고도로 향상된 이온 전도성을 부여합니다. [23] PEO-LiTFSI-10HKUST-1 MOFs 전해질(PL10HM)은 2에 도달하는 향상된 이온 전도도를 나타냈습니다. [24] MD 시뮬레이션을 사용하여 유리 구조의 채널 영역을 엄격하게 정량화함으로써 향상된 이온 전도성이 Na 원자 주변의 전하 보상된 BO 증가로 인해 Na 풍부 채널의 연결성 증가에 기인할 수 있음을 보여줍니다. [25] 결과적으로 낮은 염 농도(3wt%)를 포함하는 폴리머는 극적으로 향상된 이온 전도도(최대 0.5%)를 나타냅니다. [26] 설계된 CPE-PHCE는 향상된 이온 전도도와 >5의 높은 산화 안정성을 나타냅니다. [27] 무작위 저항기 모델을 사용하여 복합 고분자 전해질의 리튬 이온 수송은 Monte Carlo 시뮬레이션에 의해 시뮬레이션되어 향상된 이온 전도도가 공간 전하 영역의 이온 전도와 공간 전하 영역의 침투에 기인할 수 있음을 보여줍니다. . [28] 고체 복합 고분자 전해질은 향상된 이온 전도도, 긴 수명 주기 능력 및 리튬 양극과의 호환성으로 인해 모든 고체 리튬 배터리에 대한 최적의 후보입니다. [29] 또한 전자의 재결합을 줄이기 위해 이온 전도도와 산화환원 안정성이 향상된 이 전해질을 사용합니다. [30] 더욱이, 전기 임피던스 분광 측정은 향상된 이온 전도도가 FeVO4 중공 미소구체의 전기화학적 성능을 향상시키는 형태 및 다공성으로 인한 것임을 설명하고 LIB의 상서로운 양극 재료로 입증되었습니다. [31] 9 wt%), 가장 우수한 전기화학적 성능은 해당 GPE: 2의 향상된 이온 전도도에서도 나타납니다. [32] 인공 합금 층은 깨끗한 고체 전해질 계면의 것보다 10배 더 높은 향상된 이온 전도도를 보여줍니다. [33] 여기서 방향성 동결은 향상된 이온 전도도, 우수한 기계적 강도 및 열 안정성을 동시에 나타내는 정렬된 나노복합체 이오노겔을 제조하기 위해 용매 대체 방법이 뒤따릅니다. [34] 5wt% 기능화된 CNT를 매트릭스에 통합하면 이온 전도도가 42로 향상되었습니다. [35] 557TiO3(LLTO) 나노섬유는 복합 고체 전해질을 형성하기 위해 CLP 매트릭스에 통합되어 충전제 덩어리를 나타내지 않고 향상된 이온 전도성을 달성합니다. [36] 또한, 300°C에서 전류밀도가 증가함에 따라 단일셀의 방전용량이 증가하는 것을 알 수 있는데, 이는 고온에서 이온전도도가 향상되었기 때문이다. [37] 결과적으로, SHCPE는 8의 향상된 이온 전도도를 나타냅니다. [38] 칼슘에 대한 큰 Pb2+ 이온 치환은 결과적으로 이온 이동 채널의 확장과 함께 단위 셀 확장을 초래하여 Pb가 풍부한 재료의 이온 전도도를 향상시킵니다. [39] 나노복합 고분자 전해질(CPE)은 향상된 이온 전도도와 리튬 양극에 대한 안정성으로 인해 전고체 리튬 금속 배터리(LMB)의 유망한 재료입니다. [40] 계면에서 에너지 밴드의 재구성이 이러한 향상된 이온 전도도 및 전지 출력에 대한 책임이 있는 것으로 밝혀졌습니다. [41] 또한 이온 전도성이 향상된 다공성 아크릴레이트 고무/테트라에틸암모늄 테트라플루오로보레이트-아세토니트릴(pACM/Et4NBF4-AN)의 신규 준고체 고분자 전해질(QPE)이 π-공액 고분자 전극과 일치하도록 준비되어 용해 및 전극의 구조 저하. [42] BH4 그룹이 있는 전해질에서 빠른 Li/Na/Mg 이온 전도도를 열기 위해 이온 전도도가 향상된 수소화붕소 엔지니어링에 대한 접근 방식, 나중에 다면체 수소화붕소의 초이온 전도도, 이들의 상관된 전도성 동역학/열역학 및 이론적으로 예측되는 높은 전도도 파생 상품이 논의됩니다. [43] 한편, 제조된 멤브레인은 액체 전해질의 흡수 및 보존 유지가 매우 높으며 이온 전도성이 향상되었습니다. [44] NLSZO 및 소결 온도에서 Sr 도핑량의 증가는 격자 매개변수의 증가와 SSE의 조밀화로 이어져 이온 전도성 향상에 기여했습니다. [45] 우리는 전위를 따라 향상된 이온 전도도를 설명할 수 있는 인장 변형장과 도펀트 분리의 결합으로 인해 전위 코어 주위에 더 빠른 이온 전도도 경로가 형성될 수 있다고 제안합니다. [46] 목표는 개선된 열 및 기계적 특성과 향상된 이온 전도성을 가진 근적외선(NIR) 방출 재료를 생산하는 것이었습니다. [47] 이 독특한 강성-유연성 결합 네트워크에 따라 제조된 고체 고분자 전해질은 향상된 이온 전도도를 나타냅니다(6. [48] Sm-doped-CeO2/SrTiO3 VAN 필름에서 실험적으로 발견된 향상된 이온 전도도에 대한 명확한 설명이 없기 때문에 우리는 무작위 구조 검색을 사용하여 수직 계면에서 구조를 결정하고 이것이 이온 전도에 어떻게 영향을 미칠 수 있는지 탐구합니다. [49]
enhanced ionic liquid 향상된 이온 액체
, nanoparticle-enhanced ionic liquid (NEIL), is proposed for CO 2 capture by mixing of MEA as the base fluid and [Bmim]BF 4 ionic liquid and TiO 2 nanoparticles as chemical additives. [1] Nanoparticle Enhanced Ionic Liquids (NEILs) are the new heat transfer fluids for direct absorption solar collectors and are comprised of small vol/wt percentage of nanoparticles in base ionic liquids (ILs). [2] These ionic liquids-based nanocolloids are also termed in the literature as ionanofluids or nanoparticles-enhanced ionic liquids. [3] Also, the dynamic viscosity of the MWCNT nanoparticle-enhanced ionic liquids decreases at low concentrations; however, it increases significantly when the concentration increases up to 1 wt%. [4] The properties of the alumina nanoparticles enhanced ionic liquids with respect to the base fluids have been modeled using feed-forward back-propagation (BP) ANNs. [5] This result arises from the enhanced ionic liquid polarization effect and transportation ability from the Fe-NiCo2S4 surface and N,S-CMK-3 structure. [6] In this experimental study, several alumina Nanoparticle Enhanced Ionic Liquids were prepared and studied in regard to their stability, pH, density and thermal conductivity. [7]NEIL(nanoparticle-enhanced ionic liquid)은 기본 유체로 MEA와 화학 첨가제로 [Bmim]BF 4 이온 액체 및 TiO 2 나노 입자를 혼합하여 CO 2 포집을 위해 제안되었습니다. [1] 나노입자 강화 이온 액체(NEIL)는 직접 흡수 태양열 집열기를 위한 새로운 열 전달 유체이며 기본 이온 액체(IL)에 작은 부피/중량%의 나노입자로 구성됩니다. [2] 이러한 이온성 액체 기반 나노콜로이드는 문헌에서 이온성 유체 또는 나노입자 강화 이온성 액체라고도 합니다. [3] 또한, MWCNT 나노입자 강화 이온성 액체의 동적 점도는 낮은 농도에서 감소합니다. 그러나 농도가 1wt%까지 증가하면 상당히 증가합니다. [4] 기본 유체에 대한 알루미나 나노입자 강화 이온성 액체의 특성은 BP(feed-forward back-propagation) ANN을 사용하여 모델링되었습니다. [5] 이러한 결과는 Fe-NiCo2S4 표면과 N,S-CMK-3 구조로부터 향상된 이온성 액체 분극 효과와 수송 능력에 기인한다. [6] 이 실험 연구에서 여러 알루미나 나노입자 강화 이온성 액체를 준비하고 안정성, pH, 밀도 및 열전도율과 관련하여 연구했습니다. [7]
enhanced ionic transport 향상된 이온 수송
This concept is applied to demonstrate the new approach for CDI, namely the photo-electric capacitive deionization (PECDI), enabled by the solar-enhanced ionic transport. [1] The as-prepared electrodes exhibited a highly porous morphology, allowing for enhanced ionic transport during electrochemical interactions. [2] It was found that the BSFSb-SDC has both electrolyte and electrode (cathode) functions with enhanced ionic transport and electrocatalytic activity simultaneously. [3]이 개념은 CDI에 대한 새로운 접근 방식, 즉 PECDI(photo-electric capacitive deionization)를 보여주기 위해 적용되었으며, 이는 태양광 강화 이온 수송에 의해 가능합니다. [1] 준비된 전극은 매우 다공성인 형태를 나타내어 전기화학적 상호작용 동안 이온 수송이 향상되었습니다. [2] BSFSb-SDC는 이온 수송 및 전기 촉매 활성이 동시에 향상되어 전해질 및 전극(음극) 기능을 모두 가지고 있음이 발견되었습니다. [3]
enhanced ionic diffusion
With a larger pore diameter and spacing in the substrate (Pore40), the MG attains a frequency-independent impedance at low frequencies (∼500 Hz) with very high Bode magnitude stability accounting for enhanced ionic diffusion. [1] This synergistic effect results from enhanced ionic diffusion, electronic conductivity, and large surface-to-volume ratio. [2]기판(Pore40)의 더 큰 기공 직경과 간격으로 MG는 향상된 이온 확산을 설명하는 매우 높은 보데 크기 안정성으로 저주파(~500Hz)에서 주파수 독립 임피던스를 달성합니다. [1] 이러한 시너지 효과는 향상된 이온 확산, 전자 전도도 및 큰 표면 대 부피 비율로 인해 발생합니다. [2]
enhanced ionic mobility
The overall improved catalytic property is due to the enhanced ionic mobility, controllable textural property, higher per-site activity and increased conductivity for the Ni0. [1] Numerical calculations of the vacancy formation energy in both ferromagnetic and paramagnetic states support our experimental observation that enhanced ionic mobility, leaving vacancies behind, is correlated to the vanishing of magnetic spin interactions above TC. [2]전반적으로 개선된 촉매 특성은 향상된 이온 이동성, 제어 가능한 조직 특성, 더 높은 사이트당 활성 및 NiO에 대한 증가된 전도도로 인한 것입니다. [1] 강자성 및 상자성 상태 모두에서 공석 형성 에너지의 수치적 계산은 공극을 남기고 강화된 이온 이동도가 TC 이상에서 자기 스핀 상호작용의 소멸과 상관된다는 우리의 실험적 관찰을 뒷받침합니다. [2]
enhanced ionic conduction
Our electrochemical and electrical analysis reveals that the composite samples have attained enhanced ionic conduction as compared to pure LZO and SDC, reaching a remarkable ionic conductivity of 0. [1] In addition, the enhanced ionic conduction of a triple conducting composite using infiltrated oxygen-ionic SDC conductors leads to an effective decrease in the Rp (1. [2]우리의 전기화학 및 전기 분석은 복합 샘플이 순수한 LZO 및 SDC와 비교하여 향상된 이온 전도를 달성하여 0의 놀라운 이온 전도도에 도달했음을 보여줍니다. [1] 또한, 침투된 산소 이온 SDC 전도체를 사용하는 삼중 전도성 복합재의 향상된 이온 전도는 Rp(1. [2]