Elastomer Membranes(엘라스토머 멤브레인)란 무엇입니까?
Elastomer Membranes 엘라스토머 멤브레인 - Dynamic crack propagation in elastomer membranes is investigated; the focus is laid on cracks reaching the speed of shear waves in the material. [1] A novel concept for sound generation using buckled dielectric (DE) elastomer membranes was proposed recently, which relies on buckling induced by a DC voltage, superimposed by an AC signal voltage to force vibration. [2] To address these challenges, we present a geometric technique for modeling fiber reinforcement on smooth elastomeric surfaces and a two-stage molding process to embed the fiber patterns dictated by that technique into elastomer membranes. [3]엘라스토머 멤브레인의 동적 균열 전파를 조사합니다. 초점은 재료의 전단파 속도에 도달하는 균열에 놓여 있습니다. [1] DC 전압에 의해 유도된 좌굴에 의존하고 AC 신호 전압이 중첩되어 진동을 유발하는 버클형 유전체(DE) 탄성 중합체 멤브레인을 사용하여 사운드 생성을 위한 새로운 개념이 최근에 제안되었습니다. [2] 이러한 문제를 해결하기 위해 우리는 매끄러운 탄성중합체 표면에서 섬유 강화를 모델링하는 기하학적 기법과 해당 기법에 의해 지시된 섬유 패턴을 탄성중합체 멤브레인에 삽입하는 2단계 성형 공정을 제시합니다. [3]
Dielectric Elastomer Membranes 유전체 엘라스토머 멤브레인
The PZT sheets directly transduce the beam’s vibration into electricity, whereas the VI DEG transduces the impacts between the inner ball and the dielectric elastomer membranes resulting from the bluff body’s vibration into electricity. [1] This article deals with the closed-loop optimal control of mechatronic devices based on dielectric elastomer membranes. [2] Piezo-capacitive stretch sensors, made of dielectric elastomer membranes coated with compliant electrodes, have recently been described as a wearable, lightweight and low-cost technology to monitor body kinematics. [3] These structures are fabricated by casting customized electrode materials onto dielectric elastomer membranes. [4] The design is based on a combination between circular out-of-plane dielectric elastomer membranes and a bi-stable biasing system which allows to increase the out-of-plane stroke. [5]PZT 시트는 빔의 진동을 직접 전기로 변환하는 반면 VI DEG는 블러프 본체의 진동으로 인한 내부 볼과 유전체 엘라스토머 멤브레인 사이의 충격을 전기로 변환합니다. [1] 이 기사에서는 유전체 엘라스토머 멤브레인을 기반으로 하는 메카트로닉스 장치의 폐루프 최적 제어를 다룹니다. [2] 유연 전극으로 코팅된 유전체 엘라스토머 멤브레인으로 만들어진 압전 용량 스트레치 센서는 최근 신체 운동학을 모니터링하기 위한 웨어러블, 경량 및 저비용 기술로 설명되었습니다. [3] 이러한 구조는 맞춤형 전극 재료를 유전체 엘라스토머 멤브레인에 주조하여 제작됩니다. [4] 이 설계는 원형 면외 유전체 엘라스토머 멤브레인과 면외 스트로크를 증가시킬 수 있는 쌍안정 바이어싱 시스템 간의 조합을 기반으로 합니다. [5]