Dynamic Buckling(동적 좌굴)란 무엇입니까?
Dynamic Buckling 동적 좌굴 - The static and dynamic buckling of graphene monolayer is studied by theoretical mechanical models and numerous simulations in this chapter. [1] The parametrically excited vibration of beams under axial periodic excitation can result in the dynamic buckling [4-5]. [2] The dynamic buckling of an elastic cylindrical shell with a general boundary condition (composed of stiffness and damping) under an axial impact by a rigid body is considered. [3] Second, the snap-through dynamic buckling of a fixed-fixed arch is analyzed and a closed-form solution for dynamic critical buckling load is found for two special cases. [4] Dynamic buckling is addressed for complete elastic spherical shells subject to a rapidly applied step in external pressure. [5] To increase the mechanical power output of the actuator and to demonstrate flight control, we present ways to overcome challenges unique to soft actuators, such as nonlinear transduction and dynamic buckling. [6] Using the verified geometrically exact model, the possibility of dynamic buckling is studied in detail. [7] A comprehensive parametric study is performed to understand the effect of weight fraction of GPLs, distribution pattern of porosity and GPL, GPL geometry, shell geometry parameter and boundary conditions on the dynamic buckling of spherical caps. [8] In addition, the applications of the discrete solid element method to dynamic buckling of the thin plate and buckling of the cracked thin plate are also given. [9] The numerical examples are presented to show the capability and effectiveness of the DSEM in simulating the dynamic buckling and crack propagation problems. [10] It was shown that the critical PGA of the dynamic buckling of the considered tank is 0. [11] This paper deals with dynamic buckling of laminated composite curved panels subjected to in-plane dynamic compressive loads. [12]그래핀 단층의 정적 및 동적 좌굴은 이 장에서 이론적 기계적 모델과 수많은 시뮬레이션을 통해 연구됩니다. [1] 축의 주기적인 여기에서 빔의 파라메트릭 여기된 진동은 동적 좌굴을 초래할 수 있습니다[4-5]. [2] 강체에 의한 축방향 충격 하에서 일반적인 경계 조건(강성과 감쇠로 구성)을 갖는 탄성 원통형 쉘의 동적 좌굴을 고려합니다. [3] 둘째, 고정 고정 아치의 스냅을 통한 동적 좌굴을 분석하고 두 가지 특수한 경우에 대해 동적 임계 좌굴 하중에 대한 폐쇄형 솔루션을 찾았습니다. [4] 동적 좌굴은 외부 압력에서 빠르게 적용되는 단계에 영향을 받는 완전한 탄성 구형 쉘에 대해 해결됩니다. [5] 액추에이터의 기계적 출력을 높이고 비행 제어를 시연하기 위해 비선형 변환 및 동적 좌굴과 같은 소프트 액추에이터 고유의 문제를 극복하는 방법을 제시합니다. [6] 검증된 기하학적으로 정확한 모델을 사용하여 동적 좌굴의 가능성을 자세히 연구합니다. [7] GPL의 중량 분율, 다공성 및 GPL의 분포 패턴, GPL 기하학, 쉘 기하학 매개변수 및 구형 캡의 동적 좌굴에 대한 경계 조건의 영향을 이해하기 위해 포괄적인 매개변수 연구가 수행됩니다. [8] 또한 박판의 동적 좌굴과 균열된 박판의 좌굴에 대한 이산 솔리드 요소법의 적용도 제시한다. [9] 동적 좌굴 및 균열 전파 문제를 시뮬레이션하는 데 있어 DSEM의 능력과 효율성을 보여주기 위해 수치적 예가 제시됩니다. [10] 고려된 탱크의 동적 좌굴의 임계 PGA는 0인 것으로 나타났습니다. [11] 이 논문은 평면내 동적 압축하중을 받는 적층 복합곡면패널의 동적 좌굴을 다룬다. [12]
sandwich functionally graded
The governing equations for analysing thermal vibration and dynamic buckling of eccentrically stiffened sandwich functionally graded cylindrical shells full filled with fluid and surrounded by elas. [1] The governing equations for analysing thermal vibration and dynamic buckling of eccentrically stiffened sandwich functionally graded cylindrical shells full filled with fluid and surrounded by elastic foundations in thermal environment are derived by using the classical shell theory, the geometrical nonlinearity in von Karman-Donnell sense, the smeared stiffener technique and Pasternak’s foundation model. [2] This paper is concerned with the nonlinear dynamic buckling of sandwich functionally graded circular cylinder shells filled with fluid. [3]편심 보강 샌드위치 기능 등급 원통형 쉘의 열 진동 및 동적 좌굴 해석을 위한 지배 방정식은 유체로 가득 차 있고 탄성으로 둘러싸여 있습니다. [1] 열 환경에서 유체로 가득 차 있고 탄성 기초로 둘러싸인 편심 보강 샌드위치 기능 등급 원통형 쉘의 열 진동 및 동적 좌굴 해석을 위한 지배 방정식은 von Karman-Donnell 의미의 기하학적 비선형성인 고전적인 쉘 이론을 사용하여 파생됩니다. 스미어드 스티프너 기법과 Pasternak의 기초 모델. [2] nan [3]
Nonlinear Dynamic Buckling
The present study is devoted to presenting a theoretical framework for nonlinear dynamic buckling behaviours of imperfect multilayer solar cells subjected to impact loading resting on the elastic foundation. [1] This study investigates the nonlinear dynamic buckling of the exponentially functionally graded orthotropic toroidal shell segments under constant loading rates under the shear deformation theory with the damping influence. [2] This article studies nonlinear dynamic buckling of imperfect beams made of functionally graded (FG) metal foams subjected to a constant velocity with various boundary conditions. [3] This paper is concerned with the nonlinear dynamic buckling of sandwich functionally graded circular cylinder shells filled with fluid. [4] In this paper, nonlinear dynamic buckling of laminated composite cylindrical panels subjected to in-plane impulsive compressive load is studied along with the failure analysis. [5]현재 연구는 탄성 기초에 충격 하중을 받는 불완전한 다층 태양 전지의 비선형 동적 좌굴 거동에 대한 이론적 프레임워크를 제시하는 데 전념합니다. [1] 이 연구는 감쇠 영향이 있는 전단 변형 이론에 따라 일정한 하중 속도에서 기하급수적으로 구배된 직교 이방성 토로이드 쉘 세그먼트의 비선형 동적 좌굴을 조사합니다. [2] 이 기사에서는 다양한 경계 조건에서 일정한 속도를 받는 기능적 등급(FG) 금속 폼으로 만들어진 불완전한 보의 비선형 동적 좌굴을 연구합니다. [3] nan [4] nan [5]
Critical Dynamic Buckling
Then, an analytical solution of axial displacement is obtained by using Laplace transform; employing the Galerkin method, the characteristic equation of transverse motion is given, and critical dynamic buckling time is obtained. [1] The effect of a small-scale parameter on the dynamic displacement and critical dynamic buckling load of nanobeams has been investigated. [2]그런 다음 Laplace 변환을 사용하여 축 변위의 해석적 솔루션을 얻습니다. Galerkin 방법을 사용하여 횡방향 운동의 특성 방정식이 주어지고 임계 동적 좌굴 시간이 얻어집니다. [1] 나노빔의 동적 변위 및 임계 동적 좌굴 하중에 대한 소규모 매개변수의 영향이 조사되었습니다. [2]
dynamic buckling load 동적 좌굴 하중
The dynamic buckling load is determined using the Budiansky & Hutchinson criterion. [1] The results show that the dynamic buckling load of perforated plates is significantly influenced by the rotational restraint stiffness, hole size and shear load as well as the initial geometric imperfection, whereas the effect of hole location can be neglected in the analysis of dynamic buckling of plates. [2] By combining a Lagrangian solution method and a semi-analytical method, some formulations are developed for determining the dynamic buckling loads of the cylindrical shells. [3] Based on these results, a detailed parametric analysis of the nonlinear truss response under vertical load is conducted using bifurcations diagrams of the Poincare map to investigate the effect of the constitutive law, strain measure, truss geometry and load control parameters on the bifurcation scenario, coexisting attractors and dynamic buckling loads. [4] The effect of a small-scale parameter on the dynamic displacement and critical dynamic buckling load of nanobeams has been investigated. [5] They were applied to the case of spatial step pressure to estimate dynamic buckling load of geometrically imperfect shells. [6]동적 좌굴 하중은 Budiansky & Hutchinson 기준을 사용하여 결정됩니다. [1] 결과는 다공판의 동적 좌굴하중이 초기 기하학적 불완전성 뿐만 아니라 회전 구속 강성, 구멍 크기 및 전단 하중에 의해 크게 영향을 받는 반면 구멍 위치의 영향은 판의 동적 좌굴 해석에서 무시될 수 있음을 보여줍니다. . [2] nan [3] 이러한 결과를 바탕으로 구성법칙, 변형률 측정, 트러스 형상 및 하중 제어 매개변수가 공존하는 분기 시나리오에 미치는 영향을 조사하기 위해 Poincare 지도의 분기 다이어그램을 사용하여 수직 하중 하에서 비선형 트러스 응답의 세부 매개변수 분석을 수행합니다. 어트랙터 및 동적 좌굴 하중. [4] 나노빔의 동적 변위 및 임계 동적 좌굴 하중에 대한 소규모 매개변수의 영향이 조사되었습니다. [5] nan [6]
dynamic buckling behavior 동적 좌굴 거동
Aiming to achieve a more accurate and reliable way for the dynamic stability analysis of stiff films considering geometric nonlinearity, an implicit dynamic element-free Galerkin method based on the Strain-Rotation decomposition theorem is developed in this paper to investigate the dynamic buckling behavior of stiff films. [1] In this article, the non-linear dynamic buckling behavior and failure of laminated composite stiffened cylindrical (LCSC) panel is performed in the finite element framework when subjected to sinusoidal and rectangular in-plane pulse loading. [2] Devoting to investigating the dynamic buckling behavior is an efficient way to avoid fatigue failure of the drillstring components and enhance drilling rate. [3] In this paper, a semi-analytical approach is proposed to investigate the dynamic buckling behavior of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) cylindrical shell under dynamic displacement load. [4] A finite element analysis model of fluid-solid coupling was established in order to study the elastoplastic dynamic buckling behavior of a stiffened plate structure. [5]기하학적 비선형성을 고려한 강성 필름의 동적 안정성 해석을 위해 보다 정확하고 신뢰할 수 있는 방법을 달성하기 위해 본 논문에서는 Strain-Rotation 분해 정리에 기반한 암시적 동적 요소 없는 Galerkin 방법을 개발하여 강성 필름의 동적 좌굴 거동을 조사합니다. 영화. [1] 이 기사에서는 정현파 및 직사각형 면내 펄스 하중을 받을 때 유한 요소 프레임워크에서 적층 복합 보강 원통형(LCSC) 패널의 비선형 동적 좌굴 거동 및 파손을 수행합니다. [2] 동적 좌굴 거동 조사에 전념하는 것은 드릴스트링 구성요소의 피로 파괴를 피하고 드릴링 속도를 향상시키는 효율적인 방법입니다. [3] 이 논문에서는 동적 변위 하중 하에서 기능 등급 탄소 나노튜브 강화 복합재(FG-CNTRC) 원통형 쉘의 동적 좌굴 거동을 조사하기 위한 반분석적 접근 방식을 제안합니다. [4] nan [5]
dynamic buckling analysi
This paper presents a dynamic buckling analysis for a rotationally restrained functionally graded (FG) graphene nanoplatelets (GPLs) reinforced composite (FG-GPLRC) porous arch under a uniform step load where GPL nanofillers are uniformly dispersed while the porosity coefficient varies along the thickness direction of the arch. [1] Next, a methodology is presented to perform dynamic buckling analysis of ASTs subjected to surge and wave loads by adapting procedures commonly used for ASTs subjected to wind or seismic loads; the methodology is illustrated with a case study AST located in the Houston Ship Channel. [2] This research deals with the nonlocal temperature-dependent dynamic buckling analysis of embedded laminated quadrilateral micro plates reinforced by functionally graded carbon nanotubes (FG-CNTs). [3]이 논문은 다공성 계수가 두께 방향을 따라 변하는 동안 GPL 나노필러가 균일하게 분산되는 균일한 단계 하중 하에서 회전 제한 기능 등급(FG) 그래핀 나노판(GPL) 강화 복합재(FG-GPLRC) 다공성 아치에 대한 동적 좌굴 분석을 제시합니다. 아치의. [1] 다음으로, 바람 또는 지진 하중을 받는 AST에 일반적으로 사용되는 절차를 적용하여 서지 및 파도 하중을 받는 AST의 동적 좌굴 해석을 수행하는 방법론이 제시됩니다. 방법론은 휴스턴 선박 채널에 위치한 사례 연구 AST로 설명됩니다. [2] 이 연구는 기능적으로 등급이 매겨진 탄소 나노튜브(FG-CNT)로 강화된 내장된 적층 사변형 마이크로 플레이트의 비국소 온도 의존 동적 좌굴 해석을 다룹니다. [3]
dynamic buckling phenomenon 동적 좌굴 현상
The dynamic buckling phenomenon of hybrid multilayer Fiber Metal Laminate structure was presented. [1] This paper presents an investigation of the dynamic buckling phenomenon in thin-walled Fiber Metal Laminate short columns subjected to axial compressive loading. [2]하이브리드 다층 Fiber Metal Laminate 구조의 동적 좌굴 현상을 제시하였다. [1] 이 논문은 축 방향 압축 하중을 받는 얇은 벽의 Fiber Metal Laminate 짧은 기둥에서 동적 좌굴 현상에 대한 조사를 제시합니다. [2]