Double Steel(더블 스틸)란 무엇입니까?
Double Steel 더블 스틸 - The double steel plate concrete composite shear walls are widely used in nuclear power structures due to good bearing capacity, deformation capacity and radiation resistance. [1] The double steel-concrete shear wall combines the advantages of steel and concrete effectively, with high bearing capacity, good plasticity, superior seismic and fire resistance performance, saving materials and simple construction, and has obvious advantages in the application of high-rise buildings, especially super high-rise buildings. [2] In this work, experimental and numerical investigations were performed on the behaviours of circular concrete filled double steel tubular (CFDST) slender columns and beams, in which the external tube employed stainless steel tube. [3] In this paper, three test models were cast about the grid -tube- type double steel plate and infilled concrete composite shear wall, the horizontal low cyclic loading test was carried out, and hysteresis curves and skeleton curves were got under different coaxial compression ratios. [4] The composite columns include steel tubular-encased reinforced concrete (R-ST) columns, steel-reinforced concrete-filled steel tubular (S-ST) columns, hollow concrete-filled double steel tubular (H-DS) columns, and solid concrete-filled double steel tubular (S-DS) columns. [5] In this study, effects of different curved structures on mechanical behavior of curved double steel-concrete composite shear (SC) walls under cyclic loading were investigated numerically. [6] By adding ribs and bars to form the double steel-concrete shear wall constrained with ribs and bars, the steel plate of the whole steel-concrete shear wall can be strengthened of the constraint. [7] This paper studies the load-carrying capacity of concrete-infilled double steel corrugated-plate walls with T-section (T-CDSCWs) under axial compression and biaxial bending. [8] The haunched joint with ribbed anchor webs in the concrete-filled double steel tubular (CFDST) structure was proposed in this study. [9] In this paper, based on a 30-story building with frame-core tube structure system, three comparative schemes are established of reinforced concrete core tube construction, steel-reinforced concrete core tube construction and the combined shear wall core tube structure with the grid-tube-type double steel plate wall with infilled concrete are established, and the dynamic elastoplastic time history is analyzed. [10] A circular concrete-filled double steel tubular column (CFDST) with a square hollow section (SHS) as an inner tube is introduced as a new form of a composite column in the paper. [11] This paper proposes a new structure suitable for high-rise buildings that combines specially shaped columns composed of concrete-filled steel tube (SCFST) frames and double steel concrete (DSC) composite walls. [12] Experimental investigation was conducted on the flexural behavior of RC T-beam strengthened with double steel channel, and different methods of plate attachment were compared. [13] This article investigates the axial compressive performance of concrete-filled double steel tubular (CFDST) short columns composed of circular section loaded concentrically. [14] A double steel plates composite shear wall member composed of “L” elements (D-L-SCW) was proposed in this paper and its seismic behavior was preliminarily studied. [15] Circular concrete-filled double steel tubular (CFDST) column is a high-performance composite column that has significant potential to be used in the construction of high-rise composite structures. [16] In this paper, the structural behavior of concrete-filled double steel tubular (CFDST) stub columns composed of square hollow sections is investigated experimentally and numerically. [17] Circular concrete-filled double steel tubular (CFDST) column offers improved strength and ductility compared to conventional concrete-filled steel tubular (CFST) column. [18] Circular high-strength concrete-filled double steel tubular (CFDST) columns are high performance members where the internal and external steel tubes offer significant confinement to the concrete infill. [19] Square concrete-filled double steel tubular (CFDST) beam-columns consisting of an internal circular steel tube have increasingly been utilized in composite building structures because of their high structural performance. [20] Based on the low cyclic loading test results of vertical stiffener joints between concrete-filled double steel tubular (CFDST) columns and steel beams, the shear transfer mechanism and shear resistance were analyzed in this paper. [21] This paper firstly studied the internal force transfer mechanism of vertical stiffener joints in concrete-filled double steel tubular (CFDST) frame structures on the basis of finite element modeling (FEM). [22] In order to study the axial compression behavior of hollow concrete filled double steel tube (HCFST) short columns, the finite element numerical simulation of five existing short columns under axial compression is carried out by ABAQUS. [23] This study was designed to find an analytical formula for predicting the ultimate shear strength of a novel kind of complex steel-concrete shear walls known as double steel plate complex shear wall (DSCSW). [24] This paper presents the sectional strength design method of concrete-infilled double steel corrugated-plate walls with T-section (T-CDSCWs). [25] Concrete-infilled double steel corrugated-plate walls (CDSCWs) are composed of two steel corrugated-plates (SCPs) which are connected through bolts, and concrete filled the spacing formed between the two SCPs. [26] An innovative double steel concrete (DSC) composite wall was developed to enhance constructability and lateral load resistance of buildings. [27] High-strength square concrete-filled double steel tubular (CFDST) slender beam-columns with a circular internal steel tube subjected to eccentric loads may undergo interaction local-global buckling. [28] DSCWs are composed of concrete-filled double steel faceplates, which are divided into several compartments by connectors and two boundary columns filled with concrete at the ends of the composite wall. [29] 5m (V) with lengths between 6 and 9 meters − 20 cm of shotcrete − Double steel mesh − Drains Figure 8. [30] The analysis outcome was the selection of a 3-core Cu 1×3×630 mm2 cable with double steel armor. [31] Circular concrete-filled double steel tubular (CFDST) columns in high-rise building structures possess high ductility and strength performance owing to the concrete confinement exerted by the external and internal circular steel tubes. [32]이중 강판 콘크리트 복합 전단벽은 우수한 지지력, 변형 능력 및 복사 저항으로 인해 원자력 구조물에 널리 사용됩니다. [1] 이중 강철 콘크리트 전단 벽은 강철과 콘크리트의 장점을 효과적으로 결합하고 높은 지지력, 우수한 가소성, 우수한 내진 및 내화 성능, 재료 절약 및 간단한 구조로 고층 건물의 적용에 분명한 이점이 있습니다. 특히 초고층 빌딩. [2] 본 연구에서는 외관에 스테인리스 강관을 사용한 원형 콘크리트 충전 이중강관(CFDST) 가는 기둥과 보의 거동에 대한 실험적 및 수치적 조사를 수행하였다. [3] 본 논문에서는 격자형 이중강판과 충전콘크리트 복합전단벽에 대하여 3개의 시험모델을 타설하고 수평저주기하중시험을 수행하였으며 동축압축비를 달리하여 히스테리시스 곡선과 골격곡선을 구하였다. [4] 복합 기둥에는 철골관으로 둘러싸인 철근콘크리트(R-ST) 기둥, 철근콘크리트로 채워진 강관(S-ST) 기둥, 중공 콘크리트로 채워진 이중강관(H-DS) 기둥 및 솔리드 콘크리트- 채워진 이중 강철 관형(S-DS) 기둥. [5] nan [6] 리브와 철근을 추가하여 리브와 철근으로 구속된 이중 철골-콘크리트 전단벽을 형성함으로써 전체 철골-콘크리트 전단벽의 강판에 구속을 강화할 수 있다. [7] 이 논문은 축 압축 및 이축 굽힘 하에서 T-섹션(T-CDSCW)이 있는 콘크리트 충전 이중 강철 골판 벽의 하중 전달 능력을 연구합니다. [8] nan [9] 본 논문에서는 골조-코어 튜브 구조 시스템을 갖춘 30층 건물을 기준으로 철근콘크리트 코어튜브 시공, 철근콘크리트 코어튜브 시공, 그리드-코어 결합전단벽 코어튜브 구조의 3가지 비교방안을 수립하였다. 콘크리트가 채워진 튜브형 이중강판벽을 구축하고 동적탄성소성시간이력을 분석하였다. [10] nan [11] 본 논문에서는 SCFST(concrete-filled steel tube) 골조와 DSC(double steel concrete) 복합벽체로 구성된 특수형 기둥을 결합한 고층 건물에 적합한 새로운 구조를 제안한다. [12] 이중강관으로 보강된 RC T형보의 휨거동에 대하여 실험적 조사를 하였으며, 판 부착방법을 서로 비교하였다. [13] nan [14] 본 논문에서는 "L" 요소(D-L-SCW)로 구성된 이중 강판 복합 전단벽 부재를 제안하고 사전에 지진 거동을 연구하였다. [15] nan [16] nan [17] nan [18] 원형 고강도 콘크리트 충전 이중 강관(CFDST) 기둥은 내부 및 외부 강관이 콘크리트 충전재에 상당한 제한을 제공하는 고성능 부재입니다. [19] 내부 원형 강관으로 구성된 사각 콘크리트 충전 이중 강관(CFDST) 보 기둥은 높은 구조적 성능으로 인해 복합 건물 구조에 점점 더 많이 사용되고 있습니다. [20] 본 논문에서는 CFDST(concrete-filled double steel tubular) 기둥과 철골보 사이의 수직 스티프너 접합부의 저주기 하중 실험 결과를 기반으로 전단 전달 메커니즘과 전단 저항을 분석하였다. [21] 본 논문에서는 먼저 FEM(Finite Element Modeling)을 기반으로 콘크리트로 채워진 이중강관(CFDST) 골조 구조물에서 수직 스티프너 접합부의 내부 힘 전달 메커니즘을 연구하였다. [22] 중공 콘크리트로 채워진 이중 강관(HCFST) 짧은 기둥의 축 압축 거동을 연구하기 위해 ABAQUS에서 축 압축을 받는 5개의 기존 짧은 기둥의 유한 요소 수치 시뮬레이션을 수행했습니다. [23] 본 연구는 DSCSW(Double Steel Plate Complex Shear Wall)로 알려진 새로운 종류의 복합 철골-콘크리트 전단벽의 극한 전단강도를 예측하기 위한 해석식을 찾기 위해 고안되었습니다. [24] 본 논문에서는 T-CDSCW(T-section)가 있는 콘크리트 충전 이중강 골판벽의 단면강도 설계방법을 제시한다. [25] 콘크리트로 채워진 이중 강철 골판지 벽(CDSCW)은 볼트로 연결된 두 개의 강철 골판지(SCP)와 두 SCP 사이에 형성된 간격을 채우는 콘크리트로 구성됩니다. [26] 혁신적인 이중 강철 콘크리트(DSC) 복합 벽체는 건물의 시공성과 횡하중 저항을 향상시키기 위해 개발되었습니다. [27] 편심 하중을 받는 원형 내부 강관이 있는 고강도 사각 콘크리트 충전 이중 강관(CFDST) 가느다란 보 기둥은 상호 작용 국부 좌굴을 겪을 수 있습니다. [28] DSCW는 콘크리트로 채워진 이중 강철 면판으로 구성되어 있으며 커넥터에 의해 여러 구획으로 나뉘며 합성 벽의 끝 부분에 콘크리트로 채워진 두 개의 경계 기둥이 있습니다. [29] 길이가 6~9m인 5m(V) - 숏크리트 20cm - 이중 강철 메쉬 - 배수구 그림 8. [30] 분석 결과는 이중 강철 갑옷이 있는 3심 Cu 1×3×630 mm2 케이블의 선택이었습니다. [31] 고층 건물 구조의 원형 콘크리트 충전 이중 강관(CFDST) 기둥은 외부 및 내부 원형 강관에 의해 가해지는 콘크리트 구속으로 인해 높은 연성과 강도 성능을 보유합니다. [32]
concrete composite shear 콘크리트 합성 전단기
The double steel plate concrete composite shear walls are widely used in nuclear power structures due to good bearing capacity, deformation capacity and radiation resistance. [1] In this paper, three test models were cast about the grid -tube- type double steel plate and infilled concrete composite shear wall, the horizontal low cyclic loading test was carried out, and hysteresis curves and skeleton curves were got under different coaxial compression ratios. [2] In this study, effects of different curved structures on mechanical behavior of curved double steel-concrete composite shear (SC) walls under cyclic loading were investigated numerically. [3]이중 강판 콘크리트 복합 전단벽은 우수한 지지력, 변형 능력 및 복사 저항으로 인해 원자력 구조물에 널리 사용됩니다. [1] 본 논문에서는 격자형 이중강판과 충전콘크리트 복합전단벽에 대하여 3개의 시험모델을 타설하고 수평저주기하중시험을 수행하였으며 동축압축비를 달리하여 히스테리시스 곡선과 골격곡선을 구하였다. [2] nan [3]
concrete filled steel 콘크리트로 채워진 강철
The composite columns include steel tubular-encased reinforced concrete (R-ST) columns, steel-reinforced concrete-filled steel tubular (S-ST) columns, hollow concrete-filled double steel tubular (H-DS) columns, and solid concrete-filled double steel tubular (S-DS) columns. [1] This paper proposes a new structure suitable for high-rise buildings that combines specially shaped columns composed of concrete-filled steel tube (SCFST) frames and double steel concrete (DSC) composite walls. [2] Circular concrete-filled double steel tubular (CFDST) column offers improved strength and ductility compared to conventional concrete-filled steel tubular (CFST) column. [3]복합 기둥에는 철골관으로 둘러싸인 철근콘크리트(R-ST) 기둥, 철근콘크리트로 채워진 강관(S-ST) 기둥, 중공 콘크리트로 채워진 이중강관(H-DS) 기둥 및 솔리드 콘크리트- 채워진 이중 강철 관형(S-DS) 기둥. [1] 본 논문에서는 SCFST(concrete-filled steel tube) 골조와 DSC(double steel concrete) 복합벽체로 구성된 특수형 기둥을 결합한 고층 건물에 적합한 새로운 구조를 제안한다. [2] nan [3]
concrete shear wall 콘크리트 전단벽
The double steel-concrete shear wall combines the advantages of steel and concrete effectively, with high bearing capacity, good plasticity, superior seismic and fire resistance performance, saving materials and simple construction, and has obvious advantages in the application of high-rise buildings, especially super high-rise buildings. [1] By adding ribs and bars to form the double steel-concrete shear wall constrained with ribs and bars, the steel plate of the whole steel-concrete shear wall can be strengthened of the constraint. [2]이중 강철 콘크리트 전단 벽은 강철과 콘크리트의 장점을 효과적으로 결합하고 높은 지지력, 우수한 가소성, 우수한 내진 및 내화 성능, 재료 절약 및 간단한 구조로 고층 건물의 적용에 분명한 이점이 있습니다. 특히 초고층 빌딩. [1] 리브와 철근을 추가하여 리브와 철근으로 구속된 이중 철골-콘크리트 전단벽을 형성함으로써 전체 철골-콘크리트 전단벽의 강판에 구속을 강화할 수 있다. [2]
Filled Double Steel 채워진 이중 강철
In this work, experimental and numerical investigations were performed on the behaviours of circular concrete filled double steel tubular (CFDST) slender columns and beams, in which the external tube employed stainless steel tube. [1] The composite columns include steel tubular-encased reinforced concrete (R-ST) columns, steel-reinforced concrete-filled steel tubular (S-ST) columns, hollow concrete-filled double steel tubular (H-DS) columns, and solid concrete-filled double steel tubular (S-DS) columns. [2] The haunched joint with ribbed anchor webs in the concrete-filled double steel tubular (CFDST) structure was proposed in this study. [3] A circular concrete-filled double steel tubular column (CFDST) with a square hollow section (SHS) as an inner tube is introduced as a new form of a composite column in the paper. [4] This article investigates the axial compressive performance of concrete-filled double steel tubular (CFDST) short columns composed of circular section loaded concentrically. [5] Circular concrete-filled double steel tubular (CFDST) column is a high-performance composite column that has significant potential to be used in the construction of high-rise composite structures. [6] In this paper, the structural behavior of concrete-filled double steel tubular (CFDST) stub columns composed of square hollow sections is investigated experimentally and numerically. [7] Circular concrete-filled double steel tubular (CFDST) column offers improved strength and ductility compared to conventional concrete-filled steel tubular (CFST) column. [8] Circular high-strength concrete-filled double steel tubular (CFDST) columns are high performance members where the internal and external steel tubes offer significant confinement to the concrete infill. [9] Square concrete-filled double steel tubular (CFDST) beam-columns consisting of an internal circular steel tube have increasingly been utilized in composite building structures because of their high structural performance. [10] Based on the low cyclic loading test results of vertical stiffener joints between concrete-filled double steel tubular (CFDST) columns and steel beams, the shear transfer mechanism and shear resistance were analyzed in this paper. [11] This paper firstly studied the internal force transfer mechanism of vertical stiffener joints in concrete-filled double steel tubular (CFDST) frame structures on the basis of finite element modeling (FEM). [12] In order to study the axial compression behavior of hollow concrete filled double steel tube (HCFST) short columns, the finite element numerical simulation of five existing short columns under axial compression is carried out by ABAQUS. [13] High-strength square concrete-filled double steel tubular (CFDST) slender beam-columns with a circular internal steel tube subjected to eccentric loads may undergo interaction local-global buckling. [14] DSCWs are composed of concrete-filled double steel faceplates, which are divided into several compartments by connectors and two boundary columns filled with concrete at the ends of the composite wall. [15] Circular concrete-filled double steel tubular (CFDST) columns in high-rise building structures possess high ductility and strength performance owing to the concrete confinement exerted by the external and internal circular steel tubes. [16]본 연구에서는 외관에 스테인리스 강관을 사용한 원형 콘크리트 충전 이중강관(CFDST) 가는 기둥과 보의 거동에 대한 실험적 및 수치적 조사를 수행하였다. [1] 복합 기둥에는 철골관으로 둘러싸인 철근콘크리트(R-ST) 기둥, 철근콘크리트로 채워진 강관(S-ST) 기둥, 중공 콘크리트로 채워진 이중강관(H-DS) 기둥 및 솔리드 콘크리트- 채워진 이중 강철 관형(S-DS) 기둥. [2] nan [3] nan [4] nan [5] nan [6] nan [7] nan [8] 원형 고강도 콘크리트 충전 이중 강관(CFDST) 기둥은 내부 및 외부 강관이 콘크리트 충전재에 상당한 제한을 제공하는 고성능 부재입니다. [9] 내부 원형 강관으로 구성된 사각 콘크리트 충전 이중 강관(CFDST) 보 기둥은 높은 구조적 성능으로 인해 복합 건물 구조에 점점 더 많이 사용되고 있습니다. [10] 본 논문에서는 CFDST(concrete-filled double steel tubular) 기둥과 철골보 사이의 수직 스티프너 접합부의 저주기 하중 실험 결과를 기반으로 전단 전달 메커니즘과 전단 저항을 분석하였다. [11] 본 논문에서는 먼저 FEM(Finite Element Modeling)을 기반으로 콘크리트로 채워진 이중강관(CFDST) 골조 구조물에서 수직 스티프너 접합부의 내부 힘 전달 메커니즘을 연구하였다. [12] 중공 콘크리트로 채워진 이중 강관(HCFST) 짧은 기둥의 축 압축 거동을 연구하기 위해 ABAQUS에서 축 압축을 받는 5개의 기존 짧은 기둥의 유한 요소 수치 시뮬레이션을 수행했습니다. [13] 편심 하중을 받는 원형 내부 강관이 있는 고강도 사각 콘크리트 충전 이중 강관(CFDST) 가느다란 보 기둥은 상호 작용 국부 좌굴을 겪을 수 있습니다. [14] DSCW는 콘크리트로 채워진 이중 강철 면판으로 구성되어 있으며 커넥터에 의해 여러 구획으로 나뉘며 합성 벽의 끝 부분에 콘크리트로 채워진 두 개의 경계 기둥이 있습니다. [15] 고층 건물 구조의 원형 콘크리트 충전 이중 강관(CFDST) 기둥은 외부 및 내부 원형 강관에 의해 가해지는 콘크리트 구속으로 인해 높은 연성과 강도 성능을 보유합니다. [16]
Infilled Double Steel
This paper studies the load-carrying capacity of concrete-infilled double steel corrugated-plate walls with T-section (T-CDSCWs) under axial compression and biaxial bending. [1] This paper presents the sectional strength design method of concrete-infilled double steel corrugated-plate walls with T-section (T-CDSCWs). [2] Concrete-infilled double steel corrugated-plate walls (CDSCWs) are composed of two steel corrugated-plates (SCPs) which are connected through bolts, and concrete filled the spacing formed between the two SCPs. [3]이 논문은 축 압축 및 이축 굽힘 하에서 T-섹션(T-CDSCW)이 있는 콘크리트 충전 이중 강철 골판 벽의 하중 전달 능력을 연구합니다. [1] 본 논문에서는 T-CDSCW(T-section)가 있는 콘크리트 충전 이중강 골판벽의 단면강도 설계방법을 제시한다. [2] 콘크리트로 채워진 이중 강철 골판지 벽(CDSCW)은 볼트로 연결된 두 개의 강철 골판지(SCP)와 두 SCP 사이에 형성된 간격을 채우는 콘크리트로 구성됩니다. [3]
Type Double Steel 유형 이중 강철
In this paper, three test models were cast about the grid -tube- type double steel plate and infilled concrete composite shear wall, the horizontal low cyclic loading test was carried out, and hysteresis curves and skeleton curves were got under different coaxial compression ratios. [1] In this paper, based on a 30-story building with frame-core tube structure system, three comparative schemes are established of reinforced concrete core tube construction, steel-reinforced concrete core tube construction and the combined shear wall core tube structure with the grid-tube-type double steel plate wall with infilled concrete are established, and the dynamic elastoplastic time history is analyzed. [2]본 논문에서는 격자형 이중강판과 충전콘크리트 복합전단벽에 대하여 3개의 시험모델을 타설하고 수평저주기하중시험을 수행하였으며 동축압축비를 달리하여 히스테리시스 곡선과 골격곡선을 구하였다. [1] 본 논문에서는 골조-코어 튜브 구조 시스템을 갖춘 30층 건물을 기준으로 철근콘크리트 코어튜브 시공, 철근콘크리트 코어튜브 시공, 그리드-코어 결합전단벽 코어튜브 구조의 3가지 비교방안을 수립하였다. 콘크리트가 채워진 튜브형 이중강판벽을 구축하고 동적탄성소성시간이력을 분석하였다. [2]
double steel tubular 이중 강철 관
In this work, experimental and numerical investigations were performed on the behaviours of circular concrete filled double steel tubular (CFDST) slender columns and beams, in which the external tube employed stainless steel tube. [1] The composite columns include steel tubular-encased reinforced concrete (R-ST) columns, steel-reinforced concrete-filled steel tubular (S-ST) columns, hollow concrete-filled double steel tubular (H-DS) columns, and solid concrete-filled double steel tubular (S-DS) columns. [2] The haunched joint with ribbed anchor webs in the concrete-filled double steel tubular (CFDST) structure was proposed in this study. [3] A circular concrete-filled double steel tubular column (CFDST) with a square hollow section (SHS) as an inner tube is introduced as a new form of a composite column in the paper. [4] This article investigates the axial compressive performance of concrete-filled double steel tubular (CFDST) short columns composed of circular section loaded concentrically. [5] Circular concrete-filled double steel tubular (CFDST) column is a high-performance composite column that has significant potential to be used in the construction of high-rise composite structures. [6] In this paper, the structural behavior of concrete-filled double steel tubular (CFDST) stub columns composed of square hollow sections is investigated experimentally and numerically. [7] Circular concrete-filled double steel tubular (CFDST) column offers improved strength and ductility compared to conventional concrete-filled steel tubular (CFST) column. [8] Circular high-strength concrete-filled double steel tubular (CFDST) columns are high performance members where the internal and external steel tubes offer significant confinement to the concrete infill. [9] Square concrete-filled double steel tubular (CFDST) beam-columns consisting of an internal circular steel tube have increasingly been utilized in composite building structures because of their high structural performance. [10] Based on the low cyclic loading test results of vertical stiffener joints between concrete-filled double steel tubular (CFDST) columns and steel beams, the shear transfer mechanism and shear resistance were analyzed in this paper. [11] This paper firstly studied the internal force transfer mechanism of vertical stiffener joints in concrete-filled double steel tubular (CFDST) frame structures on the basis of finite element modeling (FEM). [12] High-strength square concrete-filled double steel tubular (CFDST) slender beam-columns with a circular internal steel tube subjected to eccentric loads may undergo interaction local-global buckling. [13] Circular concrete-filled double steel tubular (CFDST) columns in high-rise building structures possess high ductility and strength performance owing to the concrete confinement exerted by the external and internal circular steel tubes. [14]본 연구에서는 외관에 스테인리스 강관을 사용한 원형 콘크리트 충전 이중강관(CFDST) 가는 기둥과 보의 거동에 대한 실험적 및 수치적 조사를 수행하였다. [1] 복합 기둥에는 철골관으로 둘러싸인 철근콘크리트(R-ST) 기둥, 철근콘크리트로 채워진 강관(S-ST) 기둥, 중공 콘크리트로 채워진 이중강관(H-DS) 기둥 및 솔리드 콘크리트- 채워진 이중 강철 관형(S-DS) 기둥. [2] nan [3] nan [4] nan [5] nan [6] nan [7] nan [8] 원형 고강도 콘크리트 충전 이중 강관(CFDST) 기둥은 내부 및 외부 강관이 콘크리트 충전재에 상당한 제한을 제공하는 고성능 부재입니다. [9] 내부 원형 강관으로 구성된 사각 콘크리트 충전 이중 강관(CFDST) 보 기둥은 높은 구조적 성능으로 인해 복합 건물 구조에 점점 더 많이 사용되고 있습니다. [10] 본 논문에서는 CFDST(concrete-filled double steel tubular) 기둥과 철골보 사이의 수직 스티프너 접합부의 저주기 하중 실험 결과를 기반으로 전단 전달 메커니즘과 전단 저항을 분석하였다. [11] 본 논문에서는 먼저 FEM(Finite Element Modeling)을 기반으로 콘크리트로 채워진 이중강관(CFDST) 골조 구조물에서 수직 스티프너 접합부의 내부 힘 전달 메커니즘을 연구하였다. [12] 편심 하중을 받는 원형 내부 강관이 있는 고강도 사각 콘크리트 충전 이중 강관(CFDST) 가느다란 보 기둥은 상호 작용 국부 좌굴을 겪을 수 있습니다. [13] 고층 건물 구조의 원형 콘크리트 충전 이중 강관(CFDST) 기둥은 외부 및 내부 원형 강관에 의해 가해지는 콘크리트 구속으로 인해 높은 연성과 강도 성능을 보유합니다. [14]
double steel plate 이중 강판
The double steel plate concrete composite shear walls are widely used in nuclear power structures due to good bearing capacity, deformation capacity and radiation resistance. [1] In this paper, three test models were cast about the grid -tube- type double steel plate and infilled concrete composite shear wall, the horizontal low cyclic loading test was carried out, and hysteresis curves and skeleton curves were got under different coaxial compression ratios. [2] In this paper, based on a 30-story building with frame-core tube structure system, three comparative schemes are established of reinforced concrete core tube construction, steel-reinforced concrete core tube construction and the combined shear wall core tube structure with the grid-tube-type double steel plate wall with infilled concrete are established, and the dynamic elastoplastic time history is analyzed. [3] A double steel plates composite shear wall member composed of “L” elements (D-L-SCW) was proposed in this paper and its seismic behavior was preliminarily studied. [4] This study was designed to find an analytical formula for predicting the ultimate shear strength of a novel kind of complex steel-concrete shear walls known as double steel plate complex shear wall (DSCSW). [5]이중 강판 콘크리트 복합 전단벽은 우수한 지지력, 변형 능력 및 복사 저항으로 인해 원자력 구조물에 널리 사용됩니다. [1] 본 논문에서는 격자형 이중강판과 충전콘크리트 복합전단벽에 대하여 3개의 시험모델을 타설하고 수평저주기하중시험을 수행하였으며 동축압축비를 달리하여 히스테리시스 곡선과 골격곡선을 구하였다. [2] 본 논문에서는 골조-코어 튜브 구조 시스템을 갖춘 30층 건물을 기준으로 철근콘크리트 코어튜브 시공, 철근콘크리트 코어튜브 시공, 그리드-코어 결합전단벽 코어튜브 구조의 3가지 비교방안을 수립하였다. 콘크리트가 채워진 튜브형 이중강판벽을 구축하고 동적탄성소성시간이력을 분석하였다. [3] 본 논문에서는 "L" 요소(D-L-SCW)로 구성된 이중 강판 복합 전단벽 부재를 제안하고 사전에 지진 거동을 연구하였다. [4] 본 연구는 DSCSW(Double Steel Plate Complex Shear Wall)로 알려진 새로운 종류의 복합 철골-콘크리트 전단벽의 극한 전단강도를 예측하기 위한 해석식을 찾기 위해 고안되었습니다. [5]
double steel corrugated
This paper studies the load-carrying capacity of concrete-infilled double steel corrugated-plate walls with T-section (T-CDSCWs) under axial compression and biaxial bending. [1] This paper presents the sectional strength design method of concrete-infilled double steel corrugated-plate walls with T-section (T-CDSCWs). [2] Concrete-infilled double steel corrugated-plate walls (CDSCWs) are composed of two steel corrugated-plates (SCPs) which are connected through bolts, and concrete filled the spacing formed between the two SCPs. [3]이 논문은 축 압축 및 이축 굽힘 하에서 T-섹션(T-CDSCW)이 있는 콘크리트 충전 이중 강철 골판 벽의 하중 전달 능력을 연구합니다. [1] 본 논문에서는 T-CDSCW(T-section)가 있는 콘크리트 충전 이중강 골판벽의 단면강도 설계방법을 제시한다. [2] 콘크리트로 채워진 이중 강철 골판지 벽(CDSCW)은 볼트로 연결된 두 개의 강철 골판지(SCP)와 두 SCP 사이에 형성된 간격을 채우는 콘크리트로 구성됩니다. [3]
double steel concrete
This paper proposes a new structure suitable for high-rise buildings that combines specially shaped columns composed of concrete-filled steel tube (SCFST) frames and double steel concrete (DSC) composite walls. [1] An innovative double steel concrete (DSC) composite wall was developed to enhance constructability and lateral load resistance of buildings. [2]본 논문에서는 SCFST(concrete-filled steel tube) 골조와 DSC(double steel concrete) 복합벽체로 구성된 특수형 기둥을 결합한 고층 건물에 적합한 새로운 구조를 제안한다. [1] 혁신적인 이중 강철 콘크리트(DSC) 복합 벽체는 건물의 시공성과 횡하중 저항을 향상시키기 위해 개발되었습니다. [2]