Crack Analysis(균열 분석)란 무엇입니까?
Crack Analysis 균열 분석 - The numerical manifold method (NMM) has achieved considerable success in crack analysis as it provides a powerful representation of complex discontinuities. [1] On the one hand, the authors analyzed the anti-crack mechanism of BFRCBC: the strength analysis was carried out by the rule of mixtures, the anti-crack analysis was implemented by the fiber spacing theory, and the entire anti-crack process was discussed in details. [2] The conventional DBEM has been widely used in crack analysis and proved to be one of the most effective BEM for solving crack problems, however it cannot be directly employed to solve more complicated multi-medium crack problems. [3] The main aim of this paper is to know the crack analysis of a construction when the fibers were used in the concrete. [4] On the one hand, the rotational degrees of freedom (RDOFs) are not required in Kirchhoff-Love theory, which drastically reduces the complexity of enrichment mode and computational scale for crack analysis. [5] Porosimetry and quantitative microcrack analysis was used to evaluate the effect of mesostructural changes in the cement matrix and interfacial transition zone (ITZ) on the mechanical performance of concrete under ETF. [6] As a result, the necessity of crack analysis for evaluation of the airtightness performance is emphasized. [7] 4% were determined using the dislocation studies and microcrack analysis. [8] The convergence and mesh independence of the PolyXFEM for crack analysis is also analyzed. [9] For this reason, the automatic methods are utilized instead of these methods to increase the speed and reliability of the crack analysis in intelligent transport systems. [10] So, this method is used according to the documentation for a variety of applications such as: large deformation measurements, crack analysis, stress strain curves (σ-e) for new materials, constructions - to evaluate certain displacements and cracks, measurement of strain caused by temperature variations. [11] This paper surveys development using image-based methods for crack analysis in the last two-decade (2002–2016). [12] In addition to the creep-fatigue behavior of titanium alloy, crack analysis is also carried out in paper. [13] It will be part of automatic building assessment based on the crack analysis. [14] In this article, the enriched degree of freedom locking that can occur in a crack analysis with the extended finite element method is described. [15] In this article, we focus on the optimal parameter of Gaussian filtering to balance the efficiency of crack identification and the accuracy of crack analysis. [16] 0% has been determined using the dislocation and microcrack analysis. [17] The methodology presented in this paper can be utilized for crack analysis in many other cellular solids, including both synthetic and natural materials. [18]수치 매니폴드 방법(NMM)은 복잡한 불연속성을 강력하게 표현하기 때문에 균열 해석에서 상당한 성공을 거두었습니다. [1] 한편, 저자는 BFRCBC의 균열 방지 메커니즘을 분석했습니다. 강도 분석은 혼합물 규칙에 의해 수행되고 균열 방지 분석은 섬유 간격 이론에 의해 구현되었으며 전체 균열 방지 프로세스가 논의되었습니다. 자세히. [2] 기존의 DBEM은 균열 해석에 널리 사용되어 왔으며 균열 문제를 해결하는 가장 효과적인 BEM 중 하나로 입증되었지만 더 복잡한 다중 균열 문제를 해결하는 데 직접 사용할 수는 없습니다. [3] 이 논문의 주요 목적은 콘크리트에 섬유가 사용되었을 때 구조물의 균열 해석을 아는 것입니다. [4] 한편, Kirchhoff-Love 이론에서는 회전 자유도(RDOF)가 필요하지 않으므로 균열 분석을 위한 농축 모드 및 계산 규모의 복잡성이 크게 줄어듭니다. [5] 다공성 측정 및 정량적 미세균열 분석은 ETF에서 콘크리트의 기계적 성능에 대한 시멘트 매트릭스 및 계면 전이 구역(ITZ)의 메조구조 변화의 영향을 평가하는 데 사용되었습니다. [6] 그 결과 기밀성능 평가를 위한 균열해석의 필요성이 강조되고 있다. [7] 4%는 전위 연구 및 미세 균열 분석을 사용하여 결정되었습니다. [8] 균열 분석을 위한 PolyXFEM의 수렴 및 메쉬 독립성도 분석됩니다. [9] 이러한 이유로 지능형 운송 시스템에서 균열 분석의 속도와 신뢰성을 높이기 위해 이러한 방법 대신 자동 방법을 사용합니다. [10] 따라서 이 방법은 다음과 같은 다양한 응용 분야에 대한 문서에 따라 사용됩니다. 큰 변형 측정, 균열 분석, 새로운 재료에 대한 응력 변형 곡선(σ-e), 구조 - 특정 변위 및 균열 평가, 변형률 측정 온도 변화에 의해. [11] 이 논문은 지난 20년(2002-2016) 균열 분석을 위해 이미지 기반 방법을 사용한 개발을 조사합니다. [12] 티타늄 합금의 크리프-피로 거동 외에도 종이에서 균열 분석이 수행됩니다. [13] 균열 분석을 기반으로 하는 자동 건물 평가의 일부가 됩니다. [14] 이 기사에서는 확장 유한 요소 방법을 사용한 균열 해석에서 발생할 수 있는 풍부한 자유도 잠금에 대해 설명합니다. [15] 이 기사에서는 균열 식별의 효율성과 균열 분석의 정확도의 균형을 맞추기 위한 최적의 가우시안 필터링 매개변수에 중점을 둡니다. [16] 전위 및 미세균열 분석을 사용하여 0%가 결정되었습니다. [17] 이 논문에서 제시한 방법론은 합성 및 천연 재료를 포함하여 다른 많은 셀룰러 고체의 균열 분석에 활용될 수 있습니다. [18]
extended finite element 확장된 유한 요소
In order to analyze the anti-reflective cracking performance of a full-depth asphalt pavement and study the propagation process of a reflection crack and its influencing factors, a mechanical model of pavement structural crack analysis was established based on the ABAQUS finite element software and the extended finite element method (XFEM). [1] This short paper presents a relatively simple approach, based on the nonlocal viscoelasticity model, coupled with cohesive crack analysis, using extended finite element techniques. [2]전면 아스팔트 포장의 반사방지 균열 성능을 분석하고 반사균열의 전파과정과 영향인자를 연구하기 위해 ABAQUS 유한요소 소프트웨어와 확장 유한 요소 방법(XFEM). [1] 이 짧은 논문은 확장 유한 요소 기술을 사용하여 응집 균열 해석과 결합된 비국소 점탄성 모델을 기반으로 하는 비교적 간단한 접근 방식을 제시합니다. [2]
Interface Crack Analysis 계면 균열 해석
In this paper we study the application of the method of fundamental solutions (MFS) to interface crack analysis in linear elastic bimaterial fracture mechanics. [1] Several representative numerical examples are presented and discussed to demonstrate that the present method is highly accurate and relatively robust for interface crack analysis of composite bimaterials. [2]이 논문에서 우리는 선형 탄성 이중 재료 파괴 역학에서 균열 해석을 인터페이스하기 위한 기본 솔루션(MFS) 방법의 적용을 연구합니다. [1] 몇 가지 대표적인 수치 예가 제시되고 논의되어 본 방법이 복합 이종재료의 계면 균열 분석에 대해 매우 정확하고 상대적으로 견고함을 입증합니다. [2]