Coupling Circuits(커플링 회로)란 무엇입니까?
Coupling Circuits 커플링 회로 - Based on the microstrip/slotline-coupling circuits, a four-way substrate integrated waveguide (SIW) power divider with high output isolation is presented. [1] Unlike conventional quadrature signal generation where circuit symmetry is carefully maintained, in the proposed design, the coupling circuits are intentionally skewed for phase and timing adjustments, while the total phase delay through the coupling circuits is set properly to ensure resonant operation. [2] Traditionally, large electrolytic capacitors or auxiliary decoupling circuits are used to mitigate the above-mentioned problems, making the converter system heavy, bulky, and thus increases the cost. [3] Mapping of the consumer through control center is achieved through interfacing of coupling circuits that leads to distribution load management. [4] Since the motor itself and the drive circuit components are not engaged during battery charging time, three inductors in the motor stator and six switches in the three-phase inverter circuit are available and can be used in active power decoupling circuits, especially in a capacitor-split-type circuit. [5]마이크로스트립/슬롯라인 결합 회로를 기반으로 하여 출력 절연이 높은 4방향 기판 집적 도파관(SIW) 전력 분배기가 제시됩니다. [1] 회로 대칭이 신중하게 유지되는 기존의 직교 신호 생성과 달리 제안된 설계에서 결합 회로는 위상 및 타이밍 조정을 위해 의도적으로 왜곡되는 반면 결합 회로를 통한 전체 위상 지연은 공진 작동을 보장하기 위해 적절하게 설정됩니다. [2] 전통적으로, 큰 전해 커패시터 또는 보조 디커플링 회로는 위에서 언급한 문제를 완화하기 위해 사용되어 컨버터 시스템을 무겁고 부피가 커지게 하여 비용을 증가시킵니다. [3] 제어 센터를 통한 소비자 매핑은 분배 부하 관리로 이어지는 결합 회로의 인터페이스를 통해 달성됩니다. [4] 모터 자체와 구동 회로 부품은 배터리 충전 시간 동안 결합되지 않기 때문에 모터 고정자에 3개의 인덕터와 3상 인버터 회로에 6개의 스위치를 사용할 수 있으며 특히 커패시터에서 유효 전력 디커플링 회로에 사용할 수 있습니다. 분할형 회로. [5]