Constricted Arc(제한된 호)란 무엇입니까?
Constricted Arc 제한된 호 - The results of investigation of the rate of gas flow and powder particles flying at plasma-jet hard-facing by a constricted arc in gas powder protective media are presented. [1] The mode of anode arc attachments in a thermal plasma torch, such as constricted arc, multi-arc or diffused arc attachment, has operational as well as economic consequences on the use of plasma torches in industrial applications. [2] The heat input in the WAAM process with the constricted arc was measured and was slightly higher than that with free arc. [3] The main argument is that the play undoes all these senses of verticality in order to arguably blow up—tear holes in—constricted architectures of power, a process that culminates at the end of the play with the incident whereby Leo commits suicide inside one of Eden Court’s flats—actually Sheena’s—as it is detonated by the local authorities. [4] The transverse magnetic field (TMF) forces the constricted arc to rotate to reduce local overheating. [5] FINDINGS Findings reveal that a majority of the women cited the inability to self-care was due to factors such as constricted architecture, specific penal policies that thwarted relational contexts in prisons and also the loss of control over their consumptive choices. [6]가스 분말 보호 매체에서 압축된 아크에 의해 단단한 표면을 향하는 플라즈마 제트에서 날아가는 가스 흐름 및 분말 입자의 속도에 대한 조사 결과를 제시합니다. [1] 수축 아크, 다중 아크 또는 확산 아크 부착과 같은 열 플라즈마 토치의 양극 아크 부착 모드는 산업 응용 분야에서 플라즈마 토치를 사용하는 데 경제적인 영향은 물론 운영상의 영향을 미칩니다. [2] 수축된 아크를 갖는 WAAM 공정에서 입력된 열이 측정되었고 자유 아크보다 약간 더 높았다. [3] 주된 주장은 연극이 제한된 권력 구조를 틀림없이 폭파시키기 위해 이러한 모든 수직성의 감각을 푼다는 것입니다. 이 과정은 극이 끝날 때 레오가 에덴 중 한 곳에서 자살하는 사건으로 절정에 달합니다. 법원의 아파트(실제로는 Sheena의 아파트)가 지방 당국에 의해 폭파되었습니다. [4] 횡방향 자기장(TMF)은 제한된 호를 회전시켜 국부적인 과열을 줄입니다. [5] 결과 조사 결과에 따르면 대다수의 여성이 자기 관리 능력 부족이 제한된 건축, 교도소 내 관계적 맥락을 방해하는 특정 형벌 정책, 소비적인 선택에 대한 통제력 상실과 같은 요인 때문이라고 밝혔습니다. [6]
Tungsten Constricted Arc
In this investigation, InterPulsed Gas Tungsten Constricted Arc Welding (IP-GTCAW) process was employed to minimize the Nb segregation and Laves phase precipitation in Inconel 718 (IN-718) alloy welds. [1] Recently, a new variant of GTAW process, popularly known as Gas Tungsten Constricted Arc Welding (GTCAW) process, was developed to weld these alloys. [2] Maraging steel (250) and 13-8 Mo stainless steel plates were joined by gas tungsten constricted arc welding (GTCAW) process in similar and dissimilar metal combinations using 13-8 Mo stainless steel filler wire. [3] To overcome this problem, a newly developed gas tungsten constricted arc welding (GTCAW) process is used for joining Inconel 718 alloy. [4]이 조사에서 InterPulsed Gas Tungsten Constricted Arc Welding(IP-GTCAW) 공정은 Inconel 718(IN-718) 합금 용접에서 Nb 편석 및 Laves 상 침전을 최소화하기 위해 사용되었습니다. [1] 최근에 GTCAW(Gas Tungsten Constricted Arc Welding) 공정으로 널리 알려진 GTAW 공정의 새로운 변형이 이러한 합금을 용접하기 위해 개발되었습니다. [2] Maraging 강(250) 및 13-8 Mo 스테인리스 강판은 13-8 Mo 스테인리스 강 필러 와이어를 사용하여 유사하거나 다른 금속 조합으로 가스 텅스텐 수축 아크 용접(GTCAW) 공정으로 접합되었습니다. [3] 이 문제를 극복하기 위해 새로 개발된 가스 텅스텐 수축 아크 용접(GTCAW) 공정이 Inconel 718 합금을 접합하는 데 사용됩니다. [4]
constricted arc welding
In this investigation, InterPulsed Gas Tungsten Constricted Arc Welding (IP-GTCAW) process was employed to minimize the Nb segregation and Laves phase precipitation in Inconel 718 (IN-718) alloy welds. [1] Recently, a new variant of GTAW process, popularly known as Gas Tungsten Constricted Arc Welding (GTCAW) process, was developed to weld these alloys. [2] Maraging steel (250) and 13-8 Mo stainless steel plates were joined by gas tungsten constricted arc welding (GTCAW) process in similar and dissimilar metal combinations using 13-8 Mo stainless steel filler wire. [3] To overcome this problem, a newly developed gas tungsten constricted arc welding (GTCAW) process is used for joining Inconel 718 alloy. [4]이 조사에서 InterPulsed Gas Tungsten Constricted Arc Welding(IP-GTCAW) 공정은 Inconel 718(IN-718) 합금 용접에서 Nb 편석 및 Laves 상 침전을 최소화하기 위해 사용되었습니다. [1] 최근에 GTCAW(Gas Tungsten Constricted Arc Welding) 공정으로 널리 알려진 GTAW 공정의 새로운 변형이 이러한 합금을 용접하기 위해 개발되었습니다. [2] Maraging 강(250) 및 13-8 Mo 스테인리스 강판은 13-8 Mo 스테인리스 강 필러 와이어를 사용하여 유사하거나 다른 금속 조합으로 가스 텅스텐 수축 아크 용접(GTCAW) 공정으로 접합되었습니다. [3] 이 문제를 극복하기 위해 새로 개발된 가스 텅스텐 수축 아크 용접(GTCAW) 공정이 Inconel 718 합금을 접합하는 데 사용됩니다. [4]
constricted arc discharge 제한된 아크 방전
We describe the features of electron emission from the plasma formed by a constricted arc discharge, and the generation of a pulsed (100–150 $\mu \text{s}$ ) low-energy (up to 10 keV) electron beam by a plasma-cathode electron source based on this type of arc in the forevacuum pressure range (5–20 Pa). [1] The research of generation of emission plasma by a constricted arc discharge in the discharge system of a pulsed forevacuum plasma-cathode electron source is presented. [2] The parameters and characteristics of a pulsed constricted arc discharge operating in the forevacuum pressure plasma-cathode source of a large-radius (about 4 cm) low-energy (up to 10 keV) electron beam are presented. [3] 56 MHz) of the constricted arc discharge of an atmospheric pressure stabilized between two electrodes in the form of rods. [4]우리는 제한된 아크 방전에 의해 형성된 플라즈마로부터의 전자 방출의 특징과 펄스형(100–150 $\mu \text{s}$ ) 저에너지(최대 10keV) 전자빔의 생성에 대해 설명합니다. 전진공 압력 범위(5–20 Pa)에서 이러한 유형의 아크를 기반으로 하는 플라즈마 음극 전자 소스. [1] 펄스 전진공 플라즈마-음극 전자원의 방전 시스템에서 수축 아크 방전에 의한 방출 플라즈마 생성에 대한 연구를 제시합니다. [2] 큰 반경(약 4cm) 저에너지(최대 10keV) 전자빔의 전진공 압력 플라즈마 음극 소스에서 작동하는 펄스 수축 아크 방전의 매개변수 및 특성이 제시됩니다. [3] 막대 형태의 두 전극 사이에서 안정화된 대기압의 제한된 아크 방전의 56 MHz). [4]
constricted arc attachment
It is found that a constricted arc attachment with the highest current density is obtained at the non-uniform cathode, leading to the largest velocity and electric potential drop in the plasma column. [1] The diffuse and constricted arc attachment modes to the anode of an argon wall-stabilized transferred arc are investigated using a 2D chemical non-equilibrium model. [2]가장 높은 전류 밀도를 갖는 수축된 아크 부착은 불균일한 음극에서 얻어지며, 이는 플라즈마 컬럼에서 가장 큰 속도 및 전위 강하를 초래하는 것으로 밝혀졌습니다. [1] 아르곤 벽 안정화 전송 아크의 양극에 대한 확산 및 수축 아크 부착 모드는 2D 화학적 비평형 모델을 사용하여 조사됩니다. [2]
constricted arc tig 수축된 아크 티그
The main objective of this investigation is to study the influence of arc constriction current frequency (ACCF) on tensile properties and microstructural evolution of aerospace Alloy 718 sheets (2 mm in thickness) joined by constricted arc TIG (CA-TIG) welding process. [1] This paper presents the influence of Constricted Arc TIG (CA-TIG) welding parameters specifically Main Current (MC), Arc Constriction Current (ACC), ACC Frequency (ACCF) and Constricted Arc Traverse Speed (CATS) on weld bead, microstructure and tensile properties of Superalloy 718 joints. [2]이 조사의 주요 목적은 압축 아크 TIG(CA-TIG) 용접 공정에 의해 결합된 항공우주 Alloy 718 시트(두께 2mm)의 인장 특성 및 미세 구조 진화에 대한 아크 수축 전류 주파수(ACCF)의 영향을 연구하는 것입니다. [1] 이 논문은 용접 비드, 미세 구조 및 인장에 대한 제한된 아크 TIG(CA-TIG) 용접 매개변수, 특히 주 전류(MC), 아크 수축 전류(ACC), ACC 주파수(ACCF) 및 제한된 아크 트래버스 속도(CATS)의 영향을 제시합니다. 초합금 718 조인트의 특성. [2]