Commercial Nanofiltration(상업용 나노여과)란 무엇입니까?
Commercial Nanofiltration 상업용 나노여과 - This study reports the grafting of a zwitterionic polymer brush consisting of poly (sulfobetaine methacrylate) (PSBMA) onto the surface of a commercial nanofiltration (NF) membrane via electron transfer-atom transfer radical polymerization (ARGET-ATRP) to achieve anti-fouling property, especially against organic foulants. [1] 5% for Na2SO4), which was three times higher than the water permeability of a commercial nanofiltration (NF) membrane. [2] Current commercial nanofiltration and reverse osmosis membranes are limited in scope and performance due to their physicochemical properties. [3]이 연구는 오염 방지 특성을 달성하기 위해 전자 전달-원자 전달 라디칼 중합(ARGET-ATRP)을 통해 상용 나노여과(NF) 멤브레인의 표면에 폴리(설포베타인 메타크릴레이트)(PSBMA)로 구성된 양쪽 이온성 폴리머 브러시를 그래프팅하는 것을 보고합니다. , 특히 유기 오염 물질에 대해. [1] Na2SO4의 경우 5%), 이는 상용 나노여과(NF) 멤브레인의 투수율보다 3배 더 높습니다. [2] 현재 상업적인 나노여과 및 역삼투막은 물리화학적 특성으로 인해 범위와 성능이 제한적입니다. [3]
Two Commercial Nanofiltration
To achieve this goal, two commercial nanofiltration membranes were used to treat medium-high strength wastewater. [1] In this work, the removal of copper (Cu2+) and nickel (Ni+) ions from synthetic water was studied on pilot scale remove by before using two commercial nanofiltration (NF) and reverse osmosis(RO) spiral-wound membrane modules (NE2521-90 and RE2521-FEN by Toray Chemical). [2]이 목표를 달성하기 위해 두 개의 상업용 나노여과막을 사용하여 중강도 폐수를 처리했습니다. [1] 이 연구에서 합성수에서 구리(Cu2+) 및 니켈(Ni+) 이온의 제거는 두 개의 상용 나노여과(NF) 및 역삼투(RO) 나선형으로 감긴 멤브레인 모듈(NE2521-90)을 사용하기 전에 파일럿 규모 제거에 대해 연구했습니다. 및 도레이 케미칼의 RE2521-FEN). [2]
Three Commercial Nanofiltration 세 가지 상업용 나노여과
In this regard, three commercial nanofiltration membranes (NP010, NP030, and NF90) were used for the experiments carried out at 6-12 bar operating pressure regarding the response surface methodology. [1] The effect of feed pH, pressure, metal concentration, and oxidation of metal on the rejection of heavy metal ions using three commercial nanofiltration membranes (NF, NF90, and NF270) were explored. [2]이와 관련하여 3개의 상용 나노여과막(NP010, NP030 및 NF90)이 반응 표면 방법론과 관련하여 6-12bar 작동 압력에서 수행된 실험에 사용되었습니다. [1] 3개의 상용 나노여과막(NF, NF90, NF270)을 사용하여 공급 pH, 압력, 금속 농도 및 금속 산화가 중금속 이온 제거에 미치는 영향을 조사했습니다. [2]
commercial nanofiltration membrane 상업용 나노여과막
In this regard, three commercial nanofiltration membranes (NP010, NP030, and NF90) were used for the experiments carried out at 6-12 bar operating pressure regarding the response surface methodology. [1] These membranes exhibit molecular weight cutoffs of ∼300 Da for organic solutes and are effective in rejecting dissolved salts, and in particular, divalent species, while exhibiting water permeabilities that rival or exceed current state-of-the-art commercial nanofiltration membranes. [2] To achieve this goal, two commercial nanofiltration membranes were used to treat medium-high strength wastewater. [3] Six kinds of commercial nanofiltration membrane were investigated. [4] The effect of feed pH, pressure, metal concentration, and oxidation of metal on the rejection of heavy metal ions using three commercial nanofiltration membranes (NF, NF90, and NF270) were explored. [5] However, commercial nanofiltration membranes can be insufficiently selective since some produced organic acids have similar molecular weights. [6] In this study, commercial nanofiltration membranes (Toray, NF 270, Desal 5 L) were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, optical profilometry, contact angle, mechanical strength and zeta potential measurements. [7] The selectivity of the composite membrane with respect to multivalent ions has been determined, and their rejection of 81% at a specific flux of 128 dm3/(m2 h) has appeared to be better than the performance of a commercial nanofiltration membrane. [8] These are much higher than those of the related TMC and commercial nanofiltration membranes. [9] Due to the high density of positive charge on the membrane, the mono-/divalent ion (Na+/Mg2+) selectivity of this novel nanofiltration membrane was at a high level compared with recent reports and much higher than commercial nanofiltration membranes. [10] 0% (from 83% to 97%), respectively, while the water fluxes are maintained at 192 and 167 kg m −2 h −1 MPa −1 , demonstrating a satisfactory water softening performance that exceeds commercial nanofiltration membranes. [11] However, low permeance of commercial nanofiltration membranes hampers their widespread application. [12] Using seawater, rGO/PAM-PES yields a higher rejection for Mg2+ and Ca2+ ions compared with commercial nanofiltration membrane (NF270). [13] However, most commercial nanofiltration membranes are still not applicable for chemical separation processes due to their low resistance to organic solvent and chlorination. [14] Remarkably, 25 COF monolayers stacked in this fashion give 100% MgCl2 rejection, whereas water permeance remains 1 to 2 orders of magnitude higher than that of commercial nanofiltration membranes. [15] Novel High Molecular Weight (HMW) amine donors, provided in excess for thermodynamic equilibrium shifting, are successfully employed in transaminase-catalyzed reactions and are effectively retained by commercial nanofiltration membranes by a size exclusion mechanism. [16] Separation membrane via LbL deposition of GO nanosheets, which were cross-linked by 1,3,5-benzenetricarbonyl trichloride, on a polydopamine-coated polysulfone support, showed membrane fluxes with approximately 4–10 times higher than most of the commercial nanofiltration membranes in addition to high rejection efficiency of 95% for Rhodamine WT, a moderate rejection rate of 66% for methylene blue and relatively low rejection (6%–46%) for monovalent and divalent salts. [17]이와 관련하여 3개의 상용 나노여과막(NP010, NP030 및 NF90)이 반응 표면 방법론과 관련하여 6-12bar 작동 압력에서 수행된 실험에 사용되었습니다. [1] 이 멤브레인은 유기 용질에 대해 ~300 Da의 분자량 컷오프를 나타내며 용해된 염, 특히 2가 종을 거부하는 데 효과적이며 현재의 최첨단 상업용 나노여과 멤브레인에 필적하거나 능가하는 투수성을 나타냅니다. [2] 이 목표를 달성하기 위해 두 개의 상업용 나노여과막을 사용하여 중강도 폐수를 처리했습니다. [3] 6가지 종류의 상업용 나노여과막을 조사하였다. [4] 3개의 상용 나노여과막(NF, NF90, NF270)을 사용하여 공급 pH, 압력, 금속 농도 및 금속 산화가 중금속 이온 제거에 미치는 영향을 조사했습니다. [5] 그러나 시판되는 나노여과막은 일부 생성된 유기산의 분자량이 유사하기 때문에 선택성이 불충분할 수 있다. [6] 이 연구에서 상업용 나노여과막(Toray, NF 270, Desal 5 L)은 푸리에 변환 적외선 분광법, 주사 전자 현미경, 광학 프로파일로메트리, 접촉각, 기계적 강도 및 제타 전위 측정으로 특성화되었습니다. [7] 다가 이온에 대한 복합막의 선택성이 결정되었으며 128 dm3/(m2 h)의 특정 유속에서 81%의 제거율이 상용 나노여과막의 성능보다 우수한 것으로 나타났습니다. [8] 이는 관련 TMC 및 상업용 나노여과막보다 훨씬 높습니다. [9] 멤브레인의 높은 양전하 밀도로 인해 이 새로운 나노여과 멤브레인의 1가/2가 이온(Na+/Mg2+) 선택성은 최근 보고서와 비교하여 높은 수준이었고 상용 나노여과 멤브레인보다 훨씬 높습니다. [10] 0%(83%에서 97%)로, 물 플럭스는 192 및 167kgm -2 h -1 MPa -1 로 유지되어 상용 나노여과막을 능가하는 만족스러운 연수 성능을 보여줍니다. [11] 그러나 상업용 나노여과막의 낮은 투과성은 광범위한 적용을 방해합니다. [12] 해수를 사용하여 rGO/PAM-PES는 상용 나노여과막(NF270)과 비교하여 Mg2+ 및 Ca2+ 이온에 대해 더 높은 제거율을 제공합니다. [13] 그러나 대부분의 상업용 나노여과막은 유기용매 및 염소화에 대한 저항성이 낮기 때문에 화학적 분리 공정에 적용할 수 없습니다. [14] 놀랍게도, 이러한 방식으로 적층된 25개의 COF 단층은 100% MgCl2 제거율을 제공하는 반면 물 투과성은 상업용 나노여과막보다 100~2000배 더 높습니다. [15] 열역학적 평형 이동을 위해 과량으로 제공되는 새로운 고분자량(HMW) 아민 공여체는 트랜스아미나제 촉매 반응에 성공적으로 사용되며 크기 배제 메커니즘에 의해 상업용 나노여과막에 효과적으로 유지됩니다. [16] 폴리도파민으로 코팅된 폴리설폰 지지체에 1,3,5-벤젠트리카보닐 트리클로라이드에 의해 가교된 GO 나노시트의 LbL 증착을 통한 분리막은 대부분의 상업용 나노여과막보다 약 4-10배 더 높은 막 플럭스를 보였다. Rhodamine WT의 경우 95%의 높은 거부 효율, methylene blue의 경우 66%의 적당한 거부율, 1가 및 2가 염의 경우 상대적으로 낮은 거부율(6%–46%)에 추가로. [17]