Commercial Copper(상업용 구리)란 무엇입니까?
Commercial Copper 상업용 구리 - For the first time, cotton fiber-shaped Cu2O nanoparticles were prepared onto the surface of a commercial copper (Cu) foil via a very simple immersion method at room temperature in which the soaking solution only contained CuSO4, Na2S2O3, and a very little amount of 1-butyl-3-methylimidazolium trifluoroacetate. [1] Commercial copper (Cu) is obtained by a hydro-pyrometallurgical process, where the Cu anodes obtained in the furnaces (Cu > 99. [2] A commercial copper based-fungicide (Kocide), dissolved copper ions, and untreated controls were used for comparison to identify unique features at physiological, cellular, and molecular levels. [3] For controlling the pore structure, micelles of a cationic surfactant, cethyltrimethylammonium bromide (CTAB), was used without and with a swelling agent, 1-dodecylamine, during coating silica on the commercial copper–zinc oxide-based catalyst. [4] As precursors, cellulose xanthate, a widely available cellulose derivative employed in viscose fiber manufacturing and commercial copper and indium xanthates were used. [5] Catalysts made from Cu-ZnO-Al2O3 mixed with different hydrotalcite contents (named CZA-HT) were prepared by physically mixing a commercial copper-based catalyst for methanol synthesis with hydrotalcite for high temperature CO2 adsorption. [6] Commercial copper (I) oxide powder is sublimated as mobile vapor at nearly melting temperature (1500 K) and subsequently can be trapped and reduced by the defect-rich nitrogen-doped carbon (NC), forming the isolated copper sites catalyst. [7] The as-synthesized CQDs were incorporated together with commercial copper (I) oxide (Cu2O) nanoparticles to form CQDs/Cu2O nanocomposite. [8] Such performance observed in the HCGF-based flexible filters is comparable to that of commercial copper-based filters in passband and roll-off. [9] Moreover, commercial copper or tin foils have been used for comparison. [10] Commercial copper was used as matrix, and different weight percentages of boron carbide (B4C), with constant weight percentage of tungsten carbide, boron nitride, and chromium, were used as reinforcements. [11]상온에서 매우 간단한 침지법을 통해 상용 구리박 표면에 면섬유 모양의 Cu2O 나노입자를 최초로 제조하였다. 1-부틸-3-메틸이미다졸륨 트리플루오로아세테이트. [1] 상업용 구리(Cu)는 용광로에서 얻은 Cu 양극(Cu > 99)에서 수압 건식 야금 공정에 의해 얻어집니다. [2] 상업적인 구리 기반 살균제(Kocide), 용해된 구리 이온 및 처리되지 않은 대조군을 비교에 사용하여 생리학적, 세포 및 분자 수준에서 고유한 특징을 식별했습니다. [3] 기공 구조를 제어하기 위해 상업용 구리-아연 산화물 기반 촉매에 실리카를 코팅하는 동안 양이온성 계면 활성제인 CTAB(cethyltrimethylammonium bromide)의 미셀을 팽윤제인 1-dodecylamine과 함께 사용하거나 사용하지 않았습니다. [4] 전구체로 비스코스 섬유 제조 및 상업용 구리 및 인듐 크산테이트에 사용되는 널리 사용되는 셀룰로오스 유도체인 셀룰로오스 크산테이트를 사용했습니다. [5] 다양한 하이드로탈사이트 함량과 혼합된 Cu-ZnO-Al2O3(CZA-HT로 명명)로 만든 촉매는 메탄올 합성을 위한 상업용 구리 기반 촉매와 고온 CO2 흡착을 위한 하이드로탈사이트를 물리적으로 혼합하여 제조되었습니다. [6] 상업용 구리(I) 산화물 분말은 거의 녹는 온도(1500 K)에서 이동 증기로 승화되며, 이어서 결함이 풍부한 질소 도핑된 탄소(NC)에 의해 포획 및 환원되어 분리된 구리 사이트 촉매를 형성할 수 있습니다. [7] 합성된 그대로의 CQD를 상업용 구리(I) 산화물(Cu2O) 나노입자와 함께 통합하여 CQD/Cu2O 나노복합체를 형성했습니다. [8] HCGF 기반 플렉서블 필터에서 관찰된 이러한 성능은 통과대역 및 롤오프에서 상용 구리 기반 필터의 성능과 비슷합니다. [9] 또한, 비교를 위해 상업용 구리 또는 주석 호일이 사용되었습니다. [10] 상용 구리가 매트릭스로 사용되었으며, 텅스텐 카바이드, 질화붕소 및 크롬의 일정한 중량 백분율과 함께 다양한 중량 백분율의 탄화붕소(B4C)가 보강재로 사용되었습니다. [11]
commercial copper nanoparticle 상업용 구리 나노 입자
For proof-of-concept, we use commercial copper nanoparticles and disperse hydrophobic polytetrafluoroethylene (PTFE) nanoparticles inside the catalyst layer. [1] Compared with commercial copper nanoparticles (Cu-NPs), citric acid and copper citrate, Cu-MOF-1 showed higher antibacterial properties with the bacteriostatic rates of 97. [2] Nanocomposites and a composite based on poly(butylene adipate-co-terephthalate) (PBAT) were synthesized using commercial copper nanoparticles (Cu-NPs), copper/cuprous oxide nanoparticles (Cu|Cu2O-NPs), and copper sulfate (CuSO4), respectively. [3] coli) was investigated by determining the minimal inhibitory concentration (MIC), the growth curve of bacteria and bacterial reduction assay, and the results indicated that compound 1 possesses higher performance compared with commercial copper nanoparticles and H2TDC. [4] The nanofibers showed higher antibacterial performance as compared with macroparticles, commercial copper nanoparticles, and pure ligands alone. [5]개념 증명을 위해 상용 구리 나노 입자를 사용하고 촉매 층 내부에 소수성 폴리테트라플루오로에틸렌(PTFE) 나노 입자를 분산시킵니다. [1] 상업용 구리 나노 입자(Cu-NPs), 시트르산 및 시트르산 구리와 비교하여 Cu-MOF-1은 97의 정균율로 더 높은 항균 특성을 보였다. [2] 나노복합체 및 폴리(부틸렌 아디페이트-코-테레프탈레이트)(PBAT) 기반 복합재는 상업용 구리 나노입자(Cu-NPs), 구리/산화제1구리 나노입자(Cu|Cu2O-NPs) 및 황산구리(CuSO4)를 사용하여 합성되었습니다. 각기. [3] coli)는 최소 억제 농도(MIC), 박테리아의 성장 곡선 및 박테리아 감소 분석을 결정하여 조사한 결과, 화합물 1이 상용 구리 나노 입자 및 H2TDC에 비해 더 높은 성능을 갖는 것으로 나타났습니다. [4] 나노 섬유는 매크로 입자, 상업용 구리 나노 입자 및 순수 리간드 단독과 비교하여 더 높은 항균 성능을 보였습니다. [5]
commercial copper mesh
In this paper, a pyramid shaped Cu2S film with hierarchical micro/nanostructures is formed on a commercial copper mesh. [1] Herein, a uniform Li nucleation/growth behavior in a confined nanospace is verified by constructing vertical graphene on a 3D commercial copper mesh. [2] Specifically speaking, commercial copper mesh served as substrate and Cu could react with (NH4)2S2O8 and Na2HPO4, forming flower-like micro-nanostructure. [3]이 논문에서는 계층적 마이크로/나노 구조를 가진 피라미드 모양의 Cu2S 필름이 상업용 구리 메쉬에 형성됩니다. [1] 여기에서 3D 상업용 구리 메쉬에 수직 그래핀을 구성하여 제한된 나노 공간에서 균일한 Li 핵 생성/성장 거동을 확인합니다. [2] 구체적으로 말하면, 상업용 구리 메쉬가 기질 역할을 하고 Cu는 (NH4)2S2O8 및 Na2HPO4와 반응하여 꽃과 같은 마이크로 나노구조를 형성할 수 있습니다. [3]
commercial copper foil
Herein, we report the use of nanostructured CuO in situ grown on commercial copper foil (CuO@Cu) via chemical etching as a Li-reservoir substrate to stabilize SEI formation and Li stripping/plating. [1] The results show that NPCS with an extreme fine microstructure displayed superior sono-Fenton-like catalytic activity compared to NPC and commercial copper foil. [2]여기에서, 우리는 SEI 형성 및 Li 스트리핑/도금을 안정화하기 위해 Li-저장소 기판으로 화학적 에칭을 통해 상용 구리 호일(CuO@Cu)에서 성장된 제자리에서 나노구조 CuO의 사용을 보고합니다. [1] 결과는 극도로 미세한 미세 구조를 가진 NPCS가 NPC 및 상업용 구리 호일에 비해 우수한 sono-Fenton 유사 촉매 활성을 나타냄을 보여줍니다. [2]
commercial copper particle 상업용 구리 입자
Here, we design an in-situ process to fabricate graphene-like carbon (GLC) reinforcing copper matrix composites: GLC can be directly fabricated on commercial copper particles using modified PECVD method followed by vacuum hot pressing, which is high-efficiency and can be massively produced for graphene reinforced metal matrix composites in industrial level. [1] Here, we design an in-situ process to fabricate graphene-like carbon (GLC) reinforcing copper matrix composites: GLC can be directly fabricated on commercial copper particles using modified PECVD method followed by vacuum hot pressing, which is high-efficiency and can be massively produced for graphene reinforced metal matrix composites in industrial level. [2]여기에서 우리는 그래핀 유사 탄소(GLC) 강화 구리 매트릭스 복합재를 제조하기 위한 현장 공정을 설계합니다. GLC는 수정된 PECVD 방법을 사용하여 상업용 구리 입자에 직접 제조할 수 있고 진공 핫 프레싱을 수행할 수 있습니다. 산업 수준에서 그래핀 강화 금속 매트릭스 복합 재료를 위해 대량 생산됩니다. [1] 여기에서 우리는 그래핀 유사 탄소(GLC) 강화 구리 매트릭스 복합재를 제조하기 위한 현장 공정을 설계합니다. GLC는 수정된 PECVD 방법을 사용하여 상업용 구리 입자에 직접 제조할 수 있고 진공 핫 프레싱을 수행할 수 있습니다. 산업 수준에서 그래핀 강화 금속 매트릭스 복합 재료를 위해 대량 생산됩니다. [2]
commercial copper chromite 상업용 구리 크로마이트
Commercial copper chromite is decorated with iron carbide nanoparticles using a simple and versatile method, producing a magnetically activable multifunctional catalytic system. [1] The toxicity of the chromium species in commercial copper chromite catalyst for furfuryl alcohol production motivates the development of efficient chromium-free catalyst. [2]상업용 크롬산 구리는 간단하고 다양한 방법을 사용하여 탄화철 나노 입자로 장식되어 자기적으로 활성화되는 다기능 촉매 시스템을 생성합니다. [1] 푸르푸릴 알코올 생산을 위한 상업용 크롬산 구리 촉매에서 크롬 종의 독성은 효율적인 무크롬 촉매의 개발을 촉진합니다. [2]