Circular Steel(원형 강철)란 무엇입니까?
Circular Steel 원형 강철 - A circular steel-yielding demountable shear connector is proposed. [1]원형 강철 항복 분리 가능한 전단 커넥터가 제안됩니다. [1]
recycled aggregate concrete
On the basis of a regression analysis of the experimental data, a revised bond strength model is proposed to predict the post-heated bond behavior between recycled aggregate concrete and circular steel tube. [1] To investigate the seismic behavior of recycled aggregate concrete-filled circular steel tube (C-RACFST), twenty-three full-scale specimens were tested by changing the design parameters. [2] The outcome indicates that the developed model gives reasonable predictions of the axial capacity of recycled aggregate concrete filled circular steel tube stub columns compared to the existing expressions. [3] The aim of this paper is to solve the problem of extremely difficult, low work efficiency and low accuracy of finite element analysis (FEA) when considering the bond-slip performance of recycled aggregate concrete filled circular steel tube (RACFCST). [4] To study the eccentric compression performance of composite columns composed of recycled aggregate concrete (RAC)-filled circular steel tube and profile steel, 17 static loading tests of the columns under eccentric compression loading were performed in this study. [5]실험 데이터의 회귀 분석을 기반으로, 재생 골재 콘크리트와 원형 강관 사이의 후가열 결합 거동을 예측하기 위해 수정된 결합 강도 모델이 제안되었습니다. [1] 재활용 골재 콘크리트 충전 원형 강관(C-RACFST)의 내진 거동을 조사하기 위해 설계 매개변수를 변경하여 23개의 실물 크기 시편을 테스트했습니다. [2] nan [3] nan [4] nan [5]
self compacting concrete
In this study, twenty-one recycled self-compacting concrete-filled circular steel tubular (RSCFCST) columns are designed and tested under eccentric compression. [1] This paper aimed to investigate the optimum outer diameter of square RC columns strengthened with self-compacting concrete filled circular steel tube. [2] This work provides a systematic analysis of the expansive and load-deformation behaviors in circular steel tube stub columns (CSTCs) of self-compacting concrete (SCC) blended with ground ci. [3]이 연구에서 21개의 재활용된 자체 압축 콘크리트 충전 원형 강관(RSCFCST) 기둥이 편심 압축 하에서 설계 및 테스트되었습니다. [1] 본 논문에서는 자압 콘크리트 충전 원형 강관으로 보강된 사각 RC 기둥의 최적 외경을 조사하는 것을 목적으로 하였다. [2] nan [3]
concrete filled steel 콘크리트로 채워진 강철
This paper experimentally and numerically investigated the behavior of the circular steel-reinforced concrete-filled steel tubular (SRCFST) members under compression-bending-shear loads. [1] However, the confinement provided by the circular steel tube can increase the strength and ductility of RAC in recycled aggregate concrete filled steel tubes (RACFST) columns. [2] Special-shaped column frame structures of prefabricated concrete-filled circular steel pipe with built-in lattice can give full play to the advantages of prefabricated buildings and concrete-filled steel pipe structures, with the advantage of high space utilization rate of special-shaped column structures. [3]본 논문에서는 압축-굽힘-전단하중을 받는 원형강철보강콘크리트충전관(SRCFST) 부재의 거동을 실험적으로 수치적으로 조사하였다. [1] 그러나 원형 강관에 의해 제공되는 구속은 재활용 골재 콘크리트 충전 강관(RACFST) 기둥에서 RAC의 강도와 연성을 증가시킬 수 있습니다. [2] 격자가 내장 된 조립식 콘크리트 충전 원형 강관의 특수 형상 기둥 프레임 구조는 특수 형상 기둥의 높은 공간 활용률의 이점과 함께 조립식 건물 및 콘크리트 충전 강관 구조의 장점을 최대한 활용할 수 있습니다. 구조. [3]
ultra high performance
Structural performance of circular steel tube confined ultra high performance concrete (UHPC) columns under uniaxial compression was presented in this study. [1] This study investigates the axial strength of circular steel tube confined concrete (STCC) columns with the employment of plain ultra high performance concrete (UHPC) and ultra high performance fiber reinforced concrete (UHPFRC) having compressive strengths of cylinders varying from 178. [2]본 연구에서는 일축압축 하에서 원형 강관 밀폐형 초고성능 콘크리트(UHPC) 기둥의 구조적 성능을 제시하였다. [1] 본 연구에서는 원기둥의 압축강도가 178부터 다양한 일반 초고성능 콘크리트(UHPC)와 초고성능 섬유강화콘크리트(UHPFRC)를 사용하여 원형강관제한콘크리트(STCC) 기둥의 축강도를 조사하였다. [2]
steel fiber reinforced 강철 섬유 강화
This paper attempts to explore the effects of recycled coarse aggregate content, steel fiber content, and concrete strength on the axial compressive behavior of steel fiber-reinforced recycled coarse aggregate (RCA) concrete-filled circular steel stub columns. [1] In order to study the axial performance of steel fiber-reinforced rubberized concrete-filled circular steel tubular columns, a total of 11 steel fiber-reinforced rubberized concrete-filled circular tubular columns are subjected to axial compression tests, considering the main parameters are rubber substitution rate, rubber particle size, steel fiber content, and concrete strength. [2]이 논문은 강섬유로 보강된 재활용 굵은골재(RCA) 콘크리트로 채워진 원형 강 스터브 기둥의 축방향 압축 거동에 대한 재생 굵은골재 함량, 강섬유 함량 및 콘크리트 강도의 영향을 조사하려고 시도합니다. [1] 강섬유 강화 고무 콘크리트 충전 원형 강관 기둥의 축방향 성능을 연구하기 위해 총 11개의 강섬유 강화 고무 콘크리트 충전 원형 관형 기둥에 대해 주요 매개변수가 고무 대체임을 고려하여 축 압축 시험을 받았습니다. 비율, 고무 입자 크기, 강철 섬유 함량 및 콘크리트 강도. [2]
Filled Circular Steel 채워진 원형 강철
This paper attempts to explore the effects of recycled coarse aggregate content, steel fiber content, and concrete strength on the axial compressive behavior of steel fiber-reinforced recycled coarse aggregate (RCA) concrete-filled circular steel stub columns. [1] This paper presents a numerical investigation of lightweight aggregate concrete-filled circular steel tubular (LACFCST) stub columns under axial compression. [2] In order to study the axial performance of steel fiber-reinforced rubberized concrete-filled circular steel tubular columns, a total of 11 steel fiber-reinforced rubberized concrete-filled circular tubular columns are subjected to axial compression tests, considering the main parameters are rubber substitution rate, rubber particle size, steel fiber content, and concrete strength. [3] Special-shaped column frame structures of prefabricated concrete-filled circular steel pipe with built-in lattice can give full play to the advantages of prefabricated buildings and concrete-filled steel pipe structures, with the advantage of high space utilization rate of special-shaped column structures. [4] Results from mechanical tests on thirteen reactive powder concrete- (RPC-) filled circular steel tube (RFCT) columns under monotonic and cyclic axial loading are presented in this paper. [5] In this study, twenty-one recycled self-compacting concrete-filled circular steel tubular (RSCFCST) columns are designed and tested under eccentric compression. [6] This paper presents an experimental study of the axial compressive behavior of RPC-filled circular steel tube stub columns. [7] To investigate the seismic behavior of recycled aggregate concrete-filled circular steel tube (C-RACFST), twenty-three full-scale specimens were tested by changing the design parameters. [8] The outcome indicates that the developed model gives reasonable predictions of the axial capacity of recycled aggregate concrete filled circular steel tube stub columns compared to the existing expressions. [9] The aim of this paper is to solve the problem of extremely difficult, low work efficiency and low accuracy of finite element analysis (FEA) when considering the bond-slip performance of recycled aggregate concrete filled circular steel tube (RACFCST). [10] This paper aimed to investigate the optimum outer diameter of square RC columns strengthened with self-compacting concrete filled circular steel tube. [11] This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. [12] To study the eccentric compression performance of composite columns composed of recycled aggregate concrete (RAC)-filled circular steel tube and profile steel, 17 static loading tests of the columns under eccentric compression loading were performed in this study. [13]이 논문은 강섬유로 보강된 재활용 굵은골재(RCA) 콘크리트로 채워진 원형 강 스터브 기둥의 축방향 압축 거동에 대한 재생 굵은골재 함량, 강섬유 함량 및 콘크리트 강도의 영향을 조사하려고 시도합니다. [1] 이 논문은 축 압축 하에서 경량 골재 콘크리트 충전 원형 강관(LAFCCST) 스터브 기둥의 수치적 조사를 제시합니다. [2] 강섬유 강화 고무 콘크리트 충전 원형 강관 기둥의 축방향 성능을 연구하기 위해 총 11개의 강섬유 강화 고무 콘크리트 충전 원형 관형 기둥에 대해 주요 매개변수가 고무 대체임을 고려하여 축 압축 시험을 받았습니다. 비율, 고무 입자 크기, 강철 섬유 함량 및 콘크리트 강도. [3] 격자가 내장 된 조립식 콘크리트 충전 원형 강관의 특수 형상 기둥 프레임 구조는 특수 형상 기둥의 높은 공간 활용률의 이점과 함께 조립식 건물 및 콘크리트 충전 강관 구조의 장점을 최대한 활용할 수 있습니다. 구조. [4] 단조 및 순환 축 하중을 받는 13개의 반응성 분말 콘크리트(RPC-) 충전 원형 강관(RFCT) 기둥에 대한 기계적 테스트 결과가 이 문서에 나와 있습니다. [5] 이 연구에서 21개의 재활용된 자체 압축 콘크리트 충전 원형 강관(RSCFCST) 기둥이 편심 압축 하에서 설계 및 테스트되었습니다. [6] nan [7] 재활용 골재 콘크리트 충전 원형 강관(C-RACFST)의 내진 거동을 조사하기 위해 설계 매개변수를 변경하여 23개의 실물 크기 시편을 테스트했습니다. [8] nan [9] nan [10] 본 논문에서는 자압 콘크리트 충전 원형 강관으로 보강된 사각 RC 기둥의 최적 외경을 조사하는 것을 목적으로 하였다. [11] nan [12] nan [13]
Walled Circular Steel
In this study, thin-walled circular steel tubes externally bonded with fiber in the hoop direction were tested under axial compression to examine the effects of the AFRP thickness, on their axial load carrying and shortening capacity. [1] Cross-sectional ovalization of thin-walled circular steel tube caused by large plastic bending usually occurs at initial large bending stage in tube's continuous rotary straightening process. [2] Cross-sectional ovalization of thin-walled circular steel tube caused by large plastic bending usually occurs at initial large bending stage in tube’s continuous rotary straightening process. [3] In this paper, advanced pore morphology (APM) foam elements are combined with thin-walled circular steel pipes by epoxy-bonding and epoxy foam-bonding processes to prepare composite circular pipes. [4]이 연구에서는 후프 방향으로 외부에서 섬유로 접합된 얇은 벽의 원형 강관을 축 방향 압축 하에서 테스트하여 AFRP 두께, 축 방향 하중 전달 및 단축 용량에 대한 영향을 조사했습니다. [1] 큰 플라스틱 굽힘으로 인한 얇은 벽 원형 강관의 단면 타원형화는 일반적으로 튜브의 연속 회전 교정 과정에서 초기 큰 굽힘 단계에서 발생합니다. [2] nan [3] 본 논문에서는 APM(Advanced pore morphology) 폼 요소를 얇은 벽의 원형 강관과 에폭시 본딩 및 에폭시 폼 본딩 공정을 통해 결합하여 복합 원형 파이프를 제조합니다. [4]
Internal Circular Steel
Square concrete-filled double steel tubular (CFDST) beam-columns consisting of an internal circular steel tube have increasingly been utilized in composite building structures because of their high structural performance. [1] The mathematical model is formulated by the fiber approach, accounting for confinement provided by the internal circular steel tube, and geometric and material nonlinearities. [2] Circular concrete-filled double steel tubular (CFDST) columns in high-rise building structures possess high ductility and strength performance owing to the concrete confinement exerted by the external and internal circular steel tubes. [3]내부 원형 강관으로 구성된 사각 콘크리트 충전 이중 강관(CFDST) 보 기둥은 높은 구조적 성능으로 인해 복합 건물 구조에 점점 더 많이 사용되고 있습니다. [1] 수학적 모델은 내부 원형 강관에 의해 제공되는 구속, 기하학적 및 재료 비선형성을 설명하는 섬유 접근 방식으로 공식화됩니다. [2] nan [3]
Corroded Circular Steel 부식된 원형 강철
This work aimed to investigate the residual moment capacity of corroded circular steel tubes (CSTs) subjected to compression force. [1] The effects of the parameters such as localized corrosion penetration, circumferential corrosion ratio, longitudinal corrosion ratio, slenderness ratio and eccentricity of mechanical behaviors of locally corroded circular steel tubes under compression were studied experimentally and numerically. [2]이 연구는 압축력을 받는 부식된 원형 강관(CST)의 잔류 모멘트 용량을 조사하는 것을 목표로 했습니다. [1] 국부 부식된 원형 강관의 압축하에서 국부 부식 침투, 원주 부식 비율, 종방향 부식 비율, 세세함 비율 및 기계적 거동의 편심과 같은 매개변수의 영향을 실험적 및 수치적으로 연구했습니다. [2]
circular steel tube 원형 스틸 튜브
This study proposed a number of AI models for predicting the axial strength in circular steel tube confined concrete (STCC) columns. [1] This work aimed to investigate the residual moment capacity of corroded circular steel tubes (CSTs) subjected to compression force. [2] This study concerns the welding thermal effect and mechanical properties of circular steel tubes strengthened by welding angle steel under the preloading condition. [3] In this study, a new hysteresis model for circular steel tube (CST) members, which includes a skeleton curve part, a Bauschinger part, a strength and stiffness degradation part, and an unloading part, is proposed. [4] This paper investigates the compressive behavior of circular steel tube-confined reinforced ultrahigh-performance concrete (UHPC) columns. [5] In response to these issues, this study conducted 96 tensile tests with respect to the different degrees of corrosion in circular steel tubes. [6] The effects of the parameters such as localized corrosion penetration, circumferential corrosion ratio, longitudinal corrosion ratio, slenderness ratio and eccentricity of mechanical behaviors of locally corroded circular steel tubes under compression were studied experimentally and numerically. [7] However, the confinement provided by the circular steel tube can increase the strength and ductility of RAC in recycled aggregate concrete filled steel tubes (RACFST) columns. [8] In this paper, a novel hybrid double-skin tubular column termed as “Hybrid RuDSTC” consisting of rubberised concrete, filament wound circular CFRP tube, and cold-formed circular steel tube was developed and experimentally explored to evaluate its performance under axial load. [9] Results from mechanical tests on thirteen reactive powder concrete- (RPC-) filled circular steel tube (RFCT) columns under monotonic and cyclic axial loading are presented in this paper. [10] However, no fiber element models have been formulated for computing the responses of CFDST columns with circular steel tubes filled with high-strength concrete incorporating accurate confinement to the core and sandwiched concrete. [11] On the basis of a regression analysis of the experimental data, a revised bond strength model is proposed to predict the post-heated bond behavior between recycled aggregate concrete and circular steel tube. [12] Square concrete-filled double steel tubular (CFDST) beam-columns consisting of an internal circular steel tube have increasingly been utilized in composite building structures because of their high structural performance. [13] In the study, eccentric compression tests of circular steel tube with a bolt–ball joint are carried out, in which three types of joint specifications and three types of installation eccentricities are considered. [14] Unlike those of the welded approach, the residual stresses along the circumferential direction of the inner or outer surfaces of the hot-rolled seamless circular steel tube sections were almost identical, which is basically consistent with the ECCS’s theoretical model. [15] A CFDSTs made of two concentric circular steel tubes with concrete infill and M16 shear connector system was fabricated. [16] In this study, thin-walled circular steel tubes externally bonded with fiber in the hoop direction were tested under axial compression to examine the effects of the AFRP thickness, on their axial load carrying and shortening capacity. [17] This paper focuses on the hysteretic damage behavior of Q345B steel in a circular steel tube under cyclic loads and describes the damage mechanism through a damage constitutive model based on experimental results. [18] This paper presents an experimental study of the axial compressive behavior of RPC-filled circular steel tube stub columns. [19] Structural performance of circular steel tube confined ultra high performance concrete (UHPC) columns under uniaxial compression was presented in this study. [20] An experimental research was conducted for the eccentric compression behavior of concrete-encased-and-filled steel tube (CEFT) columns with high-strength circular steel tube. [21] The mathematical model is formulated by the fiber approach, accounting for confinement provided by the internal circular steel tube, and geometric and material nonlinearities. [22] In this paper, we propose to enhance the deformation stability through introducing initial kerfs on the inner and outer surfaces of the circular steel tube in its axial direction to guide the propagation of cracks during the splitting process, thus we can improve the crushing force via a significant increase in tube wall thickness. [23] Cross-sectional ovalization of thin-walled circular steel tube caused by large plastic bending usually occurs at initial large bending stage in tube's continuous rotary straightening process. [24] This study investigates the axial strength of circular steel tube confined concrete (STCC) columns with the employment of plain ultra high performance concrete (UHPC) and ultra high performance fiber reinforced concrete (UHPFRC) having compressive strengths of cylinders varying from 178. [25] Three octagonal hollow steel tubes were examined under axial compression while three circular steel tubes and two square steel tubes were tested for comparison. [26] To investigate the seismic behavior of recycled aggregate concrete-filled circular steel tube (C-RACFST), twenty-three full-scale specimens were tested by changing the design parameters. [27] Cross-sectional ovalization of thin-walled circular steel tube caused by large plastic bending usually occurs at initial large bending stage in tube’s continuous rotary straightening process. [28] This paper presents an experimental investigation on the confinement effects of circular steel tubes filled with foamed concrete (FCFST) subjected to axial thrust and bending. [29] The manufacturing process of cold-formed steel hollow sections can be divided into four main stages: (1) the coiling and uncoiling of a steel strip, (2) the transverse bending of the uncoiled strip into a circular shape, (3) the welding of the circular tube along the longitudinal strip edges, and (4) the shaping of the welded circular steel tube into a specific cross-sectional shape. [30] In this study, the performance of glass fiber-reinforced epoxy resin (GFRP) reinforced circular steel tubes under low-velocity transverse impact loads was examined using both numerical and experimental methods. [31] The outcome indicates that the developed model gives reasonable predictions of the axial capacity of recycled aggregate concrete filled circular steel tube stub columns compared to the existing expressions. [32] The aim of this paper is to solve the problem of extremely difficult, low work efficiency and low accuracy of finite element analysis (FEA) when considering the bond-slip performance of recycled aggregate concrete filled circular steel tube (RACFCST). [33] This paper aimed to investigate the optimum outer diameter of square RC columns strengthened with self-compacting concrete filled circular steel tube. [34] Circular concrete-filled double steel tubular (CFDST) columns in high-rise building structures possess high ductility and strength performance owing to the concrete confinement exerted by the external and internal circular steel tubes. [35] This work provides a systematic analysis of the expansive and load-deformation behaviors in circular steel tube stub columns (CSTCs) of self-compacting concrete (SCC) blended with ground ci. [36] This paper investigated the effect of using circular steel tube as confinement of the RuC under axial, flexural and combined loading conditions. [37] This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. [38] This paper presents experimental and numerical investigations on residual stresses in a hot-bent circular steel tube. [39] To study the eccentric compression performance of composite columns composed of recycled aggregate concrete (RAC)-filled circular steel tube and profile steel, 17 static loading tests of the columns under eccentric compression loading were performed in this study. [40] Using the Taguchi method, this study investigated several factors affecting the uplift resistance of the concrete columns reinforced by circular steel tube with ring shear connectors. [41]본 연구에서는 원형 강관 구속 콘크리트(STCC) 기둥의 축방향 강도를 예측하기 위한 여러 AI 모델을 제안했습니다. [1] 이 연구는 압축력을 받는 부식된 원형 강관(CST)의 잔류 모멘트 용량을 조사하는 것을 목표로 했습니다. [2] 본 연구는 예압 조건에서 앵글강을 용접하여 강화된 원형 강관의 용접 열 효과 및 기계적 특성에 관한 것이다. [3] 본 연구에서는 골격곡선부, Bauschinger부, 강도 및 강성저하부, 제하부로 구성된 원형강관(CST) 부재에 대한 새로운 히스테리시스 모델을 제안한다. [4] 이 논문은 원형 강관으로 고정된 강화 초고성능 콘크리트(UHPC) 기둥의 압축 거동을 조사합니다. [5] 이러한 문제에 대응하기 위해 본 연구에서는 원형 강관의 다양한 부식 정도에 대해 96개의 인장 시험을 수행하였다. [6] 국부 부식된 원형 강관의 압축하에서 국부 부식 침투, 원주 부식 비율, 종방향 부식 비율, 세세함 비율 및 기계적 거동의 편심과 같은 매개변수의 영향을 실험적 및 수치적으로 연구했습니다. [7] 그러나 원형 강관에 의해 제공되는 구속은 재활용 골재 콘크리트 충전 강관(RACFST) 기둥에서 RAC의 강도와 연성을 증가시킬 수 있습니다. [8] nan [9] 단조 및 순환 축 하중을 받는 13개의 반응성 분말 콘크리트(RPC-) 충전 원형 강관(RFCT) 기둥에 대한 기계적 테스트 결과가 이 문서에 나와 있습니다. [10] 그러나 코어와 샌드위치 콘크리트에 대한 정확한 구속을 통합하는 고강도 콘크리트로 채워진 원형 강관이 있는 CFDST 기둥의 응답을 계산하기 위해 섬유 요소 모델이 공식화되지 않았습니다. [11] 실험 데이터의 회귀 분석을 기반으로, 재생 골재 콘크리트와 원형 강관 사이의 후가열 결합 거동을 예측하기 위해 수정된 결합 강도 모델이 제안되었습니다. [12] 내부 원형 강관으로 구성된 사각 콘크리트 충전 이중 강관(CFDST) 보 기둥은 높은 구조적 성능으로 인해 복합 건물 구조에 점점 더 많이 사용되고 있습니다. [13] 본 연구에서는 3가지 유형의 이음 사양과 3가지 유형의 설치 편심을 고려한 볼트-볼 조인트가 있는 원형 강관의 편심 압축 시험을 수행합니다. [14] nan [15] nan [16] 이 연구에서는 후프 방향으로 외부에서 섬유로 접합된 얇은 벽의 원형 강관을 축 방향 압축 하에서 테스트하여 AFRP 두께, 축 방향 하중 전달 및 단축 용량에 대한 영향을 조사했습니다. [17] 본 논문은 순환하중을 받는 원형 강관에서 Q345B 강재의 히스테리시스 손상 거동에 초점을 맞추고 실험 결과에 기반한 손상 구성 모델을 통해 손상 메커니즘을 설명합니다. [18] nan [19] 본 연구에서는 일축압축 하에서 원형 강관 밀폐형 초고성능 콘크리트(UHPC) 기둥의 구조적 성능을 제시하였다. [20] nan [21] 수학적 모델은 내부 원형 강관에 의해 제공되는 구속, 기하학적 및 재료 비선형성을 설명하는 섬유 접근 방식으로 공식화됩니다. [22] 본 논문에서는 원형 강관의 내부 및 외부 표면에 초기 커프를 축 방향으로 도입하여 균열 과정에서 균열 전파를 유도함으로써 변형 안정성을 향상시키고 튜브 벽 두께의 상당한 증가. [23] 큰 플라스틱 굽힘으로 인한 얇은 벽 원형 강관의 단면 타원형화는 일반적으로 튜브의 연속 회전 교정 과정에서 초기 큰 굽힘 단계에서 발생합니다. [24] 본 연구에서는 원기둥의 압축강도가 178부터 다양한 일반 초고성능 콘크리트(UHPC)와 초고성능 섬유강화콘크리트(UHPFRC)를 사용하여 원형강관제한콘크리트(STCC) 기둥의 축강도를 조사하였다. [25] nan [26] 재활용 골재 콘크리트 충전 원형 강관(C-RACFST)의 내진 거동을 조사하기 위해 설계 매개변수를 변경하여 23개의 실물 크기 시편을 테스트했습니다. [27] nan [28] 본 논문은 축방향 추력 및 굽힘을 받는 발포 콘크리트로 채워진 원형 강관(FCFST)의 구속 효과에 대한 실험적 조사를 제시합니다. [29] nan [30] nan [31] nan [32] nan [33] 본 논문에서는 자압 콘크리트 충전 원형 강관으로 보강된 사각 RC 기둥의 최적 외경을 조사하는 것을 목적으로 하였다. [34] nan [35] nan [36] 이 논문은 축 방향, 굴곡 및 결합 하중 조건에서 RuC의 구속으로 원형 강관을 사용하는 효과를 조사했습니다. [37] nan [38] nan [39] nan [40] 본 연구에서는 Taguchi 방법을 사용하여 링 전단 커넥터가 있는 원형 강관으로 보강된 콘크리트 기둥의 인양 저항에 영향을 미치는 여러 요인을 조사했습니다. [41]
circular steel plate 원형 강판
The model setup includes forming a steel container with dimensions (70 x 70 x 70) cm and a circular steel plate of 10 cm diameter. [1] A method for calculating the vibrations of a circular steel plate, clamped around the circumference and loaded with a short-term load, with the determination of the frequency of the fun damental tone (the lowest type of vibration), is considered. [2] The Levenberg-Marquardt algorithm is employed in the inverse conduction heat transfer problem using the results of experimental tests in thin flat circular steel plates with different thicknesses subjected to heat flux applied over the heated area, considered constant from the beginning to the end of heating, on the centre of the plates, followed by natural cooling. [3] The clay bed was loaded at its center with the aid of a circular steel plate of 170 mm diameter and 20 mm thickness. [4] This paper presents an experimental investigation into the bearing capacity of concrete blocks axially loaded through square and circular steel plates. [5] In this novel damper seismic input energy will be dissipated through flexural yielding of circular steel plates when system experiences small to medium displacements. [6] An equivalent single axle wheel load (ESAL) of 550 kPa was considered which was applied through a circular steel plate using dynamic hydraulic actuator of 100 kN capacity. [7] A numerical investigation has been conducted on a 3 mm thick 2 m circular steel plate to understand the behaviour and the characteristics of the state-of-the-art thickness-shear transducer. [8] This paper presents a simplified analytical formulation that uses Lagrangian Energy Approach to predict air and underwater blast response of air-backed simply-supported circular steel plates. [9] The loading was applied through a circular steel plate which replicates the traffic loading applied through a sophisticated double acting linear dynamic actuator attached to a 3. [10]모델 설정에는 치수(70 x 70 x 70) cm와 10 cm 직경의 원형 강판을 갖는 강철 용기 형성이 포함됩니다. [1] 주위에 고정된 원형 강판의 진동을 계산하는 방법 기본 톤(가장 낮은 유형의 진동)의 주파수 결정과 함께 단기 하중이 가해지는 둘레가 고려됩니다. [2] nan [3] 점토층은 직경 170mm, 두께 20mm의 원형 강판을 사용하여 중심에 하중을 가했습니다. [4] 이 논문은 정사각형 및 원형 강판을 통해 축방향으로 하중을 받는 콘크리트 블록의 지지력에 대한 실험적 조사를 제시합니다. [5] 이 새로운 댐퍼에서 지진 입력 에너지는 시스템이 중소 변위를 경험할 때 원형 강판의 굴곡 항복을 통해 소산됩니다. [6] 100kN 용량의 동적 유압 액추에이터를 사용하여 원형 강판을 통해 적용된 550kPa의 등가 단일 축 휠 하중(ESAL)이 고려되었습니다. [7] 최첨단 두께 전단 변환기의 거동과 특성을 이해하기 위해 3mm 두께 2m 원형 강판에 수치 조사를 수행했습니다. [8] nan [9] 하중은 3에 부착된 정교한 복동 선형 동적 액추에이터를 통해 적용된 교통 하중을 복제하는 원형 강판을 통해 적용되었습니다. [10]
circular steel tubular 원형 강철 관
This study presents the experimental and analytical modelling of externally bonded glass fibre-reinforced polymer (GFRP) sheets for strengthening circular steel tubular short columns. [1] The monotonic tensile and extremely low cycle fatigue tests were conducted on the different types of base metal and weld metal specimens in circular steel tubular joints. [2] This paper presents a numerical investigation of lightweight aggregate concrete-filled circular steel tubular (LACFCST) stub columns under axial compression. [3] A study of the aerodynamic characteristics of circular steel tubular lattice tower bodies in an ultrahigh-voltage direct-current transmission tower under skew winds is presented. [4] This paper investigates the in-plane failure mechanisms and strength of circular steel tubular Vierendeel truss arches with a rectangular section by using the finite element models. [5] In order to study the axial performance of steel fiber-reinforced rubberized concrete-filled circular steel tubular columns, a total of 11 steel fiber-reinforced rubberized concrete-filled circular tubular columns are subjected to axial compression tests, considering the main parameters are rubber substitution rate, rubber particle size, steel fiber content, and concrete strength. [6] This paper studies the structural stability of circular steel tubular stub columns at elevated temperatures under axial compression. [7] In this study, twenty-one recycled self-compacting concrete-filled circular steel tubular (RSCFCST) columns are designed and tested under eccentric compression. [8]이 연구는 원형 강철 관형 짧은 기둥을 강화하기 위한 외부 결합 유리 섬유 강화 폴리머(GFRP) 시트의 실험 및 분석 모델링을 제시합니다. [1] 원형 강관 조인트의 다양한 유형의 모재 및 용접 금속 시편에 대해 단조 인장 및 극저주기 피로 시험을 수행했습니다. [2] 이 논문은 축 압축 하에서 경량 골재 콘크리트 충전 원형 강관(LAFCCST) 스터브 기둥의 수치적 조사를 제시합니다. [3] 사풍이 가해지는 초고압 직류 송전탑에서 원형 철제 관형 격자탑 본체의 공기역학적 특성에 대한 연구를 제시한다. [4] 본 논문에서는 유한요소모델을 이용하여 단면이 직사각형인 원형 강관 Vierendeel 트러스 아치의 면내 파괴 메커니즘과 강도를 조사하였다. [5] 강섬유 강화 고무 콘크리트 충전 원형 강관 기둥의 축방향 성능을 연구하기 위해 총 11개의 강섬유 강화 고무 콘크리트 충전 원형 관형 기둥에 대해 주요 매개변수가 고무 대체임을 고려하여 축 압축 시험을 받았습니다. 비율, 고무 입자 크기, 강철 섬유 함량 및 콘크리트 강도. [6] 이 논문은 축 압축 하에서 고온에서 원형 강철 관형 스터브 기둥의 구조적 안정성을 연구합니다. [7] 이 연구에서 21개의 재활용된 자체 압축 콘크리트 충전 원형 강관(RSCFCST) 기둥이 편심 압축 하에서 설계 및 테스트되었습니다. [8]
circular steel pipe
Special-shaped column frame structures of prefabricated concrete-filled circular steel pipe with built-in lattice can give full play to the advantages of prefabricated buildings and concrete-filled steel pipe structures, with the advantage of high space utilization rate of special-shaped column structures. [1] This paper presents the first combined theoretical and case study to calculate the increase of jacking forces for circular steel pipes with welded flange slabs during the entire jacking process. [2] In this paper, advanced pore morphology (APM) foam elements are combined with thin-walled circular steel pipes by epoxy-bonding and epoxy foam-bonding processes to prepare composite circular pipes. [3] This study presents dynamic responses of circular pipe models as a part of fundamental studies on dynamic stability monitoring of the large circular steel pipe cofferdam with the ship collision. [4]격자가 내장 된 조립식 콘크리트 충전 원형 강관의 특수 형상 기둥 프레임 구조는 특수 형상 기둥의 높은 공간 활용률의 이점과 함께 조립식 건물 및 콘크리트 충전 강관 구조의 장점을 최대한 활용할 수 있습니다. 구조. [1] 이 논문은 전체 잭킹 과정에서 플랜지 슬래브가 용접된 원형 강관에 대한 잭킹력의 증가를 계산하기 위한 최초의 결합된 이론 및 사례 연구를 제시합니다. [2] 본 논문에서는 APM(Advanced pore morphology) 폼 요소를 얇은 벽의 원형 강관과 에폭시 본딩 및 에폭시 폼 본딩 공정을 통해 결합하여 복합 원형 파이프를 제조합니다. [3] nan [4]