Centrifugal Spray(원심 스프레이)란 무엇입니까?
Centrifugal Spray 원심 스프레이 - The granulometric composition and the particle shape structure of the dried product were obtained for the spray drying using the centrifugal sprayer and the pneumatic sprayer for the various solid content range in the source product and the various drying agent initial temperature. [1]원심분무기와 공압분무기를 이용하여 분무건조를 하여 원료제품의 다양한 고형분 범위와 다양한 건조제 초기온도에 대한 입도 조성 및 건조물의 입도구조를 구하였다. [1]
Plasma Centrifugal Spray 플라즈마 원심 스프레이
Nine samples with different porosity and cell shape were obtained by the SLM method with the use of AlSi10Mg aluminum powder obtained by gas atomization and BB751P nickel powder obtained by plasma centrifugal spraying. [1] The studied material was nitrided metal powders made on a plasma centrifugal spraying (PREP) unit and ingots from granules obtained by hot isostatic pressing (HIP). [2]얻은 AlSi10Mg 알루미늄 분말을 사용하여 SLM 방법으로 다공성 및 셀 모양이 다른 9 개의 샘플을 얻었습니다. 가스 분무 및 플라즈마 원심 분무에 의해 얻은 BB751P 니켈 분말에 의해. [1] 연구된 재료는 플라즈마 원심 분무(PREP) 장치에서 만든 질화된 금속 분말과 열간 등방압 압축(HIP)에 의해 얻은 과립으로부터의 잉곳이었습니다. [2]
centrifugal spray drying 원심 분무 건조
As an advanced treatment of desulfurization wastewater, centrifugal spray drying technology, which can achieve a zero liquid discharge target, has attracted wide attention and great interest in recent years. [1] Spherical ceramic powders with eutectic composition and good flowability were obtained by centrifugal spray drying. [2] The location of hot air distributor plays an important role in the centrifugal spray drying. [3] Reasonable and effective process parameters in the catalyst centrifugal spray drying are of significance for the quality and industrial production of the catalyst. [4] Compared with centrifugal spray drying technology, LiFePO4/C prepared by pressure spray has a smaller particle size and exhibits more uniform particle size distribution as well as better electrochemical performance. [5]탈황 폐수의 선진 처리로서 액체 배출 제로를 달성할 수 있는 원심 분무 건조 기술은 최근 몇 년 동안 많은 관심과 큰 관심을 받고 있습니다. [1] 원심 분무 건조에 의해 공융 조성과 양호한 유동성을 갖는 구형 세라믹 분말을 얻었다. [2] 열풍 분배기의 위치는 원심 분무 건조에서 중요한 역할을 합니다. [3] 촉매 원심 분무 건조에서 합리적이고 효과적인 공정 매개변수는 촉매의 품질과 산업적 생산에 중요합니다. [4] 원심 분무 건조 기술과 비교하여 압력 분무로 제조된 LiFePO4/C는 입자 크기가 더 작고 입자 크기 분포가 더 균일하며 전기화학적 성능이 더 우수합니다. [5]