Bistable Switching(쌍안정 스위칭)란 무엇입니까?
Bistable Switching 쌍안정 스위칭 - We find that positive feedback in this network gives rise to bistable switching of Rab5 activation and provide evidence that controlling the inactive population of Rab5 on the membrane can shape the network response. [1] Analysis of the experimental data and simulation results shows that the SMA wires actuated bistable structure can be well-performed for the bistable switching. [2] We analyzed three toy models, based on mass-action kinetics, with increasing complexity and sought for oscillations and (fast) bistable switching. [3] The polymer stabilisation in ferroelectric liquid crystals allows a bistable switching of a biaxial alignment, which is surface-stabilised ferroelectric liquid crystal display (SS-FLCDs), to alter into uniaxial alignment of V-shaped switching to enable AC driving. [4] Bistable switching of a polymer-walled cell could be achieved by using three-terminal electrodes where both vertical and in-plane electric fields can be applied. [5]우리는 이 네트워크의 긍정적인 피드백이 Rab5 활성화의 쌍안정 전환을 발생시키고 멤브레인에서 Rab5의 비활성 개체군을 제어하면 네트워크 응답을 형성할 수 있다는 증거를 제공한다는 것을 발견했습니다. [1] 실험 데이터 및 시뮬레이션 결과의 분석은 SMA 와이어 작동 쌍안정 구조가 쌍안정 스위칭에 대해 잘 수행될 수 있음을 보여줍니다. [2] 우리는 복잡성이 증가하고 진동 및 (빠른) 쌍안정 스위칭을 추구하면서 대량 작용 역학을 기반으로 하는 세 가지 장난감 모델을 분석했습니다. [3] 강유전성 액정의 폴리머 안정화는 표면 안정화 강유전성 액정 디스플레이(SS-FLCD)인 이축 배향의 쌍안정 스위칭이 V자형 스위칭의 단축 배향으로 변경되어 AC 구동을 가능하게 합니다. [4] 폴리머 벽 셀의 쌍안정 스위칭은 수직 및 평면 내 전기장이 모두 적용될 수 있는 3단자 전극을 사용하여 달성할 수 있습니다. [5]
bistable switching proces 쌍안정 스위칭 프로세스
Assuming that the membrane shape during the bistable switching process is decisive for some applications as in e. [1] With a Laser-Doppler Vibrometer the velocity of the membranes during the bistable switching process is measured and integrated over time to calculate the membrane displacement in the centre. [2] The FFT of a bistable switching process showed most beneficial peaks for ultrasound generation in the range of 70 – 90 kHz with extremely high acceleration values in the range of 105 m•s−2, thus promising high sound pressure levels. [3]쌍안정 스위칭 프로세스 동안 멤브레인 모양이 e. [1] 레이저 도플러 진동계를 사용하면 쌍안정 스위칭 프로세스 동안 멤브레인의 속도가 측정되고 시간이 지남에 따라 통합되어 중앙의 멤브레인 변위를 계산합니다. [2] 쌍안정 스위칭 프로세스의 FFT는 105m•s-2 범위에서 매우 높은 가속 값과 함께 70 – 90kHz 범위에서 초음파 생성에 가장 유익한 피크를 보여 높은 음압 레벨을 약속합니다. [3]