Bioi Nanosheets(바이오닉 나노시트)란 무엇입니까?
Bioi Nanosheets 바이오닉 나노시트 - The prepared composites had high purity, and the AgI nanoparticles were evenly loaded on the flower-like BiOI nanosheets, both absorbing the visible light. [1] It constructed a direct Z-scheme heterojunction with BiOI nanosheets, not only promoting the charge separation, but also preserving the strong oxidation ability of photogenerated holes in black TiO2 and strong reducing ability of photogenerated electrons in BiOI. [2] BiOI nanosheets with dominantly exposed (001) and (110) facets were synthesized by different methods. [3] In this study, we reported a series of novel Ti3C2/Bi@OVs-BiOI photocatalysts using MXene to tailor the surface structure and photocatalytic activity of BiOI nanosheets. [4] BiOI nanosheets are widely developed in the photocatalytic field due to their wide visible-light absorption band and sheet-like structure. [5] The growth rate and uniformity of the BiOI nanosheets were compared between the treated fabrics and the untreated fabrics. [6] It is proposed that the BiOI nanosheets not only serve as protecting layer to restrain the photocorrosion of CdS, but also facilitate the charge separation in CdS by the virtue of the p-n junction formed between CdS and BiOI. [7] The BiOI nanosheets/chrysanthemum-like nanoflowers were successfully deposited on the surface of TiO2 nanotube arrays (TiO2 NTs) by the successive ionic layer adsorption and reaction (SILAR) method, and the morphology and visible light response of samples with different SILAR deposition cycles were investigated in detail. [8] TiO 2 NTs/Bi 2 S 3 -BiOI nanosheets and nanorods were prepared, and the self-assembled microflowers were also observed. [9] The results revealed that BiOI appears as a flower-like microspheres assembled by nanosheets which are anchored over RGO surface, while ZnO nanoparticles attached on the BiOI nanosheets. [10] A novel signal-off photoelectrochemical (PEC) immunosensor was proposed for procalcitonin (PCT) sensitive detection based on the Au nanoparticles/BiOI nanosheets/Black TiO2 nanoparticles (Au NPs/BiOI NSs/B-TiO2 NPs) as photoactive matrix and PbS quantum dots/Co3O4 polyhedron (PbS/Co3O4) as a quenching signal label for signal amplification. [11] On the basis of the XPS analysis, Ti-O-Bi bonds are formed between BiOI nanosheets and TiO2nanoparticles rather than a simple overlap of single material. [12] The results showed that NH2-MIL-125(Ti) catalysts were highly dispersed on the surface of BiOI nanosheets. [13] A simple two-step method of growing ZnO nanorod arrays on the surface of BiOI nanosheets was developed under mild environment. [14] Specifically, density functional theory calculation shows that the existence of I vacancies would create a new electric states vacancy band below the conduction band of BiOI and thus can reduce the bandgap of BiOI nanosheets. [15] The BiOI homojunctions were constructed between BiOI nanosheets and BiOI nanoflowers, which were prepared with a facile ultrasound-assisted solvothermal method. [16] In this work, ultrathin nanotubes of Bi5O7I with a 5 nm diameter and a 1 nm wall are obtained through a hydrothermal method while the phase and morphology of the products are regulated by the pH values and polyvinylpyrrolidone (PVP) concentration of the reaction system, of which the products can be tuned from BiOI nanosheets to Bi5O7I nanobelts and ultrathin Bi5O7I nanotubes. [17] The BiOI nanosheets were uniformly immobilized on the surface of heterojunction nanofibers through I− ion etching process. [18]제조된 복합재료는 순도가 높았고, 가시광선을 흡수하는 꽃 모양의 BiOI 나노시트에 AgI 나노입자가 고르게 로딩되었다. [1] 그것은 BiOI 나노시트와 직접 Z-scheme heterojunction을 구성하여 전하 분리를 촉진할 뿐만 아니라 블랙 TiO2에서 광 생성된 정공의 강력한 산화 능력과 BiOI에서 광 생성된 전자의 강력한 환원 능력을 보존합니다. [2] (001) 및 (110) 면이 우세하게 노출된 BiOI 나노시트는 다른 방법으로 합성되었습니다. [3] 이 연구에서 우리는 BiOI 나노시트의 표면 구조와 광촉매 활성을 조정하기 위해 MXene을 사용하는 일련의 새로운 Ti3C2/Bi@OVs-BiOI 광촉매를 보고했습니다. [4] BiOI 나노시트는 가시광선 흡수 대역이 넓고 시트와 같은 구조로 인해 광촉매 분야에서 널리 개발되고 있습니다. [5] BiOI 나노시트의 성장률과 균일도를 처리된 직물과 처리하지 않은 직물 사이에서 비교하였다. [6] BiOI 나노시트는 CdS의 광부식을 억제하는 보호층 역할을 할 뿐만 아니라 CdS와 BiOI 사이에 형성된 p-n 접합 덕분에 CdS의 전하 분리를 촉진하는 것으로 제안되었습니다. [7] BiOI 나노시트/국화 유사 나노플라워는 SILAR(연속 이온층 흡착 및 반응) 방법에 의해 TiO2 나노튜브 어레이(TiO2 NT)의 표면에 성공적으로 증착되었으며, SILAR 증착 주기가 다른 샘플의 형태 및 가시광선 응답은 다음과 같습니다. 자세히 조사했습니다. [8] TiO 2 NTs/Bi 2 S 3 -BiOI 나노시트와 나노막대를 제작하고 자기조립된 마이크로플라워도 관찰하였다. [9] 결과는 BiOI가 RGO 표면 위에 고정된 나노시트에 의해 조립된 꽃과 같은 미소구체로 나타나는 반면 ZnO 나노입자는 BiOI 나노시트에 부착된 것으로 나타났습니다. [10] Au 나노입자/BiOI 나노시트/블랙 TiO2 나노입자(Au NPs/BiOI NSs/B-TiO2 NPs)를 광활성 매트릭스 및 PbS 양자점으로 기반으로 프로칼시토닌(PCT) 민감성 검출을 위한 새로운 신호 차단 광전기화학(PEC) 면역센서가 제안되었습니다. /Co3O4 다면체(PbS/Co3O4)는 신호 증폭을 위한 소광 신호 라벨입니다. [11] XPS 분석을 기반으로 단일 물질의 단순한 중첩보다는 BiOI 나노시트와 TiO2나노 입자 사이에 Ti-O-Bi 결합이 형성됩니다. [12] 결과는 NH2-MIL-125(Ti) 촉매가 BiOI 나노시트의 표면에 고도로 분산되어 있음을 보여주었다. [13] BiOI 나노시트의 표면에 ZnO 나노로드 어레이를 성장시키는 간단한 2단계 방법이 온화한 환경에서 개발되었습니다. [14] 특히, 밀도 함수 이론 계산은 I 공석의 존재가 BiOI의 전도대 아래에 새로운 전기 상태 공석 대역을 생성하여 BiOI 나노시트의 밴드갭을 감소시킬 수 있음을 보여줍니다. [15] BiOI 동종접합은 BiOI 나노시트와 BiOI 나노플라워 사이에 구성되었으며, 이는 손쉬운 초음파 보조 solvothermal 방법으로 준비되었습니다. [16] 본 연구에서는 수열법을 통해 직경 5nm, 벽 1nm의 초박형 Bi5O7I 나노튜브를 수득하고, 반응계의 pH 값과 PVP(Polyvinylpyrrolidone) 농도에 따라 생성물의 상과 형태를 조절한다. 제품은 BiOI 나노시트에서 Bi5O7I 나노벨트 및 초박형 Bi5O7I 나노튜브로 조정할 수 있습니다. [17] BiOI 나노시트는 I- 이온 에칭 공정을 통해 이종접합 나노섬유의 표면에 균일하게 고정되었다. [18]
Ultrathin Bioi Nanosheets 초박형 Bioi 나노시트
We demonstrate in this work an efficient strategy for boosting bulk charge transport of BiVO4 through the facile impregnation of as-prepared BiVO4 photoanode in the precursor solution of ultrathin BiOI nanosheets. [1] In this work, ultrathin BiOI nanosheets were synthesized through a simple surfactant (PVP) assisted hydrothermal route. [2] Ultrathin BiOI nanosheets with surface oxygen vacancies have been synthesized in situ and evaluated as improved bismuth oxyhalide photocatalysts for the degradation of organic pollutants. [3]우리는 이 작업에서 초박형 BiOI 나노시트의 전구체 용액에서 준비된 BiVO4 광양극의 손쉬운 함침을 통해 BiVO4의 벌크 전하 수송을 향상시키기 위한 효율적인 전략을 보여줍니다. [1] 이 연구에서 초박형 BiOI 나노시트는 간단한 계면활성제(PVP) 보조 열수 경로를 통해 합성되었습니다. [2] 표면 산소 결손이 있는 초박형 BiOI 나노시트가 현장에서 합성되었으며 유기 오염 물질의 분해를 위한 개선된 비스무트 옥시할라이드 광촉매로 평가되었습니다. [3]
Loading Bioi Nanosheets Bioi 나노시트 로딩
A facile step-by-step synthetic route was developed to synthesize the three-dimensional (3D) BiOI/g-C3N4 heterojunction photocatalyst by loading BiOI nanosheets onto g-C3N4 microtubes. [1] Here, using a facile chemical precipitation method, a novel and hierarchical core-shell structure of n-Bi12TiO20@p-BiOI (BTO@BiOI) heterojunction was rationally designed and synthesized by loading BiOI nanosheets on BTO nanofibers. [2]g-C3N4 마이크로튜브에 BiOI 나노시트를 로딩하여 3차원(3D) BiOI/g-C3N4 이종접합 광촉매를 합성하기 위한 손쉬운 단계별 합성 경로가 개발되었습니다. [1] 여기에서 손쉬운 화학적 침전 방법을 사용하여 n-Bi12TiO20@p-BiOI(BTO@BiOI) 이종 접합의 새롭고 계층적인 코어-쉘 구조를 BTO 나노섬유에 BiOI 나노시트를 로딩하여 합리적으로 설계하고 합성했습니다. [2]