Alloy Welding(합금 용접)란 무엇입니까?
Alloy Welding 합금 용접 - In present study, we report the feasibility of TiAl alloy to Ni-based superalloy welding through V/Cu composite interlayer carried out by laser. [1]본 연구에서는 레이저에 의해 수행된 V/Cu 복합 중간막을 통해 Ni 기반 초합금 용접에 TiAl 합금의 가능성을 보고합니다. [1]
Aluminum Alloy Welding 알루미늄 합금 용접
Experiments show that the sensor achieves real-time and effective detection and acquisition of arc spectrum information in aluminum alloy welding process. [1] Aluminum alloy welding frequently experiences difficulties such as heat input control, poor weld formation, and susceptibility to pore generation. [2] In this paper the MIG welding is used for high-speed train 6005-T6 aluminum alloy welding experiments. [3] Introduction Aluminum alloy welding structure is widely used in automobile, ship, high-speed railway, aviation, aerospace and other fields. [4] This work focused on the influence of hydrogen content on the microstructure and mechanical properties of ER5183 Al-Mg-Mn alloy wires for aluminum alloy welding. [5] The work shows that the proposed Support Vector Machine model classifies aluminum alloy welding states effectively. [6] Compared with conventional GMAW, the pulsed ultrasonic assisted gas metal arc welding (PU-GMAW) was an effective and newly-developed aluminum alloy welding method, because of its rapid droplet transfer and deep weld penetration. [7] It has been applied to the aluminum alloy welding and grain refinement, and has improved the mechanical properties of the joints. [8] In this study, twelve 2219 aluminum alloy welding samples were divided into four groups. [9]실험은 센서가 알루미늄 합금 용접 공정에서 아크 스펙트럼 정보의 실시간 및 효과적인 감지 및 획득을 달성함을 보여줍니다. [1] 알루미늄 합금 용접은 열 입력 제어, 열악한 용접 형성 및 기공 발생에 대한 민감성과 같은 어려움을 자주 경험합니다. [2] 이 논문에서 MIG 용접은 고속 열차 6005-T6 알루미늄 합금 용접 실험에 사용됩니다. [3] 소개 알루미늄 합금 용접 구조는 자동차, 선박, 고속철도, 항공, 항공 우주 및 기타 분야에서 널리 사용됩니다. [4] 이 연구는 알루미늄 합금 용접을 위한 ER5183 Al-Mg-Mn 합금 와이어의 미세 구조 및 기계적 특성에 대한 수소 함량의 영향에 초점을 맞추었습니다. [5] 이 작업은 제안된 Support Vector Machine 모델이 알루미늄 합금 용접 상태를 효과적으로 분류함을 보여줍니다. [6] 펄스 초음파 보조 가스 금속 아크 용접(PU-GMAW)은 기존 GMAW와 비교하여 빠른 액적 전달과 깊은 용접 침투로 인해 효과적이고 새로 개발된 알루미늄 합금 용접 방법이었습니다. [7] 알루미늄 합금 용접 및 결정립 미세화에 적용하여 접합부의 기계적 특성을 향상시켰습니다. [8] 이 연구에서 12개의 2219 알루미늄 합금 용접 샘플을 4개의 그룹으로 나누었습니다. [9]