Alloy Targets(합금 타겟)란 무엇입니까?
Alloy Targets 합금 타겟 - This review presents different methods of producing multi-element nanoparticles, including the use of multiple targets, alloy targets and in-line deposition methods to coat pre-formed cores. [1] The Zr–Y-based alloy targets are used for spraying of heat-resisting ceramic coatings on the gas-turbine hot section components surface by the plasma-chemical deposition techniques. [2] The neutron yield and target lifetime are calculated at different deuterium energy and alloy targets with variable surface layers. [3] MeN/TiSiN (Me = Ti, Cr, Zr, Mo, NbxAl1−x) coatings were deposited by cathodic arc ion plating using alloy targets with fixed parameters. [4] In this article, the frictional force on projectile shank is discussed indirectly through the comparison between experimental data and empirical/analytical formulas of the penetration depth for both concrete and aluminium-alloy targets. [5] Moreover, the ion energy distributions were derived from the time-of-flight spectra for the ions with different ion charge states and compared between the pure metal and alloy targets. [6] CrXAlYSiZN films were synthesized by radio-frequency magnetron sputtering from alloy targets. [7]이 리뷰는 미리 형성된 코어를 코팅하기 위한 다중 타겟, 합금 타겟 및 인라인 증착 방법의 사용을 포함하여 다중 요소 나노입자를 생산하는 다양한 방법을 제시합니다. [1] Zr-Y 기반 합금 타겟은 플라즈마 화학 증착 기술에 의해 가스터빈 고온 섹션 구성 요소 표면에 내열 세라믹 코팅을 스프레이하는 데 사용됩니다. [2] 중성자 수율과 타겟 수명은 다양한 표면층이 있는 다양한 중수소 에너지 및 합금 타겟에서 계산됩니다. [3] MeN/TiSiN(Me=Ti, Cr, Zr, Mo, NbxAl1-x) 코팅은 고정 매개변수를 가진 합금 타겟을 사용하여 음극 아크 이온 도금에 의해 증착되었습니다. [4] 이 기사에서 발사체 생크에 대한 마찰력은 실험 데이터와 콘크리트 및 알루미늄 합금 타겟 모두에 대한 침투 깊이의 경험적/해석 공식 간의 비교를 통해 간접적으로 논의됩니다. [5] 또한 이온 에너지 분포는 이온 전하 상태가 다른 이온에 대한 비행 시간 스펙트럼에서 파생되었으며 순수 금속과 합금 타겟 사이에서 비교되었습니다. [6] CrXAlYSiZN 필름은 합금 타겟에서 고주파 마그네트론 스퍼터링에 의해 합성되었습니다. [7]