Additive Technologies(적층 기술)란 무엇입니까?
Additive Technologies 적층 기술 - This article describes the additive technologies used in the training of engineering specialists. [1] The application of additive technologies presents the potential in designing a customised orthosis for every patient individually. [2] There are different types of additive technologies that are capable of building pieces in diverse materials. [3] The article presents the results of studies of compositions of intermetallic nickel alloy based on casting single-crystal rhenium containing VKNA-25 grade alloy for the manufacture of parts by the methods of additive technologies. [4] The study of foreign experience has confirmed the relevance of the introduction of additive technologies into production practice. [5] The article provides an analysis of current trends and statistical indicators that characterize international cooperation in the field of innovative processes, including additive technologies. [6] The emerging Internet of Things (IoT) paradigm keeps pressure on constant innovation of manufacturing processes, mainly on additive technologies that can significantly reduce waste and cost of manufactured parts. [7] A comparison of the kinematics used in additive technologies is carried out in order to determine their advantages and disadvantages. [8] This offers new possibilities for the functionalization of parts that are already fabricated through a combination of subtractive and additive technologies (hybrid manufacturing). [9] One of the potential applications of additive technologies is the production of highly porous structures with complex geometries, while printing is carried out using gel-like materials. [10] The frames of bridge prostheses made by the subtractive method have a higher dimensional accuracy compared to the frames obtained using additive technologies. [11] It is much more promising to use additive technologies for these purposes. [12] The chosen material is intended for injection molding and especially for the production of products made by additive technologies. [13] Additive technologies are among the most rapidly developing areas of modern production. [14] In the available literature, there are two approaches to solving this problem, including the replacement of the jaw with vascularised bone grafts, of which the fibula flap is the most promising, and the implantation of endoprostheses of the jaws, of which patient-specific anatomical endoprostheses made using additive technologies are the most advanced. [15] The proposed mechanism can be applied in many areas of activity of industrial enterprises, including additive technologies due to the growth of automation, robotization and the development of artificial intelligence. [16] Friction modifier additive technologies play a crucial role in controlling friction and wear of lubricated tribological systems. [17] Typical defects in the microstructures of objects obtained using additive technologies (AT) and the application efficiency of standard methods of processing powder alloys (Hot Isostatic Pressing (HIP), heat treatment (HT)) to improve the microstructure and increase the mechanical properties are considered. [18] In this work, we consider the issues of determining the chemical composition of heat-resistant nickel alloys at various stages of the production of semi-finished products and finished products from them using additive technologies. [19] Advanced methods of obtaining and processing metallic and non-metallic materials for structural and functional applications, including additive technologies, new casting, powder metallurgy, welding, surface treatment technologies. [20] COVID-19 has caused a global pandemic since December 2019 It has impacted not only the wellbeing of human society but also has been damaging to the global economy This has imposed severe threats and challenges on businesses The British government has launched aid schemes to combat the new scenarios developed as a result of the pandemic This paper aims to assess the impact of COVID-19 on foundries in the UK Recorded responses from a detailed survey of the British foundries were analysed and short- and long-term action plans for the foundries are suggested The current status, challenges, and future direction of the UK foundries are discussed An opinion for the use of additive technologies with business model innovation for the de-centralised foundries is presented © 2021, The Minerals, Metals & Materials Society. [21] On the other hand, the difference in thermophysical properties of the dissimilar material layers leads to residual stresses, which cause deformation and destruction of such a bimetallic joint produced via the methods of surfacing or additive technologies. [22] Additive technologies are now widely used in various fields of clinical medicine. [23] To increase the efficiency of technical preparation for the production of components produced by additive technologies, the importance of simulation and optimization processes is growing already in the phase of the design solution. [24] Modern trends in the development of additive technologies are aimed at saving material, introducing new materials and improving the physical and mechanical characteristics of the resulting products. [25] In the context of this paper, three additive technologies are evaluated with respect to their applicability against the background of different retrofitting applications. [26] Both glycolide and lactide-based polymers are widely used in medicine, pharmaceuticals, the food industry, and additive technologies. [27] As a part of the work, the particle shape, particle size distribution and technical characteristics of the powders were investigated, and also the compliance of materials with the requirements of additive technologies (SLM) was determined. [28] The paper discusses the principles of controlling the parameters of a functional voxel model during the manufacturing of a part prototype using additive technologies. [29] The development of additive technologies in the Russian Federation is constrained by the lack of indigenous base for the production of metal powders. [30] Generative design is seen as an information technology that works with cross-cutting digital technologies including additive technologies and artificial intelligence. [31] For the development of the additive technologies it is necessary to expand the range of the used materials. [32] While this work focuses on a specific process, the methodology and findings may provide the basis for developing future deformation processing-based additive technologies. [33] They are made individually in accordance with the anatomical and functional structures of the anterior pelvic semi-ring of the patient with using additive technologies. [34] Today 3D printing with ceramics is a promising direction in the development of additive technologies. [35] The presented papers cover a wide range of areas such as cyber-physical systems, IoT (smart home, smart city), robotics, mechatronics, Artificial Intelligence, systems for working with big data (big data, data mining, blockchain), computer vision and visualization systems, additive technologies, fundamental problems of data mining. [36] This review discusses the development prospects of additive technologies for the manufacturing of complex technological items on the surface of the Moon under scarce resource availability and low-gravity conditions. [37] It was found, that a additive technologies have a clear impact on the torsional strength of the tested machine components, including the placement of the prototype relative to the 3D printing plane or the method of processing polymer material. [38] 20 μm fraction of powders does not have fluidity, and thus cannot be used for additive technologies. [39] The use of additive technologies for the production of parts is one of the main trends in recent years in the field of industrial production. [40] As a result the purpose of this work became development of the technology for surface quality improvement of parts manufactured with the aid of additive technologies. [41] New 3D-printing additive technologies allow to develop patient-specific cones. [42] This article investigates the hot rolling aspects of a large-sized ring of non-standard, cross-sectional shape, produced from VT6 titanium alloy, and grown using additive technologies (АТ). [43] In modern industry, production speeds are constantly increasing, so additive technologies are becoming a powerful alternative to traditional single and small-scale production. [44] The spread of additive technologies from prototyping to manufacturing has made the development of new products possible, but still needs effective methods in order to allow their characterization. [45] The use of additive technologies, however, has its limitations and in order to be able to take full advantage of the opportunities they offer, a legitimate functional system should be created and embedded within proper structures to support crisis management. [46] The relevance of the research is due to the active development of additive technologies and the possibility of producing stamping tools from plastic of optimal shape, which has an important practical significance in the manufacture of thin-walled products in the aviation and automotive industries. [47] The results obtained are the basis for the application of a targeted and personalized algorithm for treating this pathology, using additive technologies and 3D printing. [48] Additive technologies (AT) or layered synthesis technologies are one of the most dynamically developing areas of “digital” production. [49] One of the innovative applications of additive technologies in cranioplasty is the creation of implants, preformed based on individual 3D-printed models. [50]이 기사에서는 엔지니어링 전문가 교육에 사용되는 적층 기술에 대해 설명합니다. [1] 적층 기술의 적용은 모든 환자에게 개별적으로 맞춤형 보조기를 설계할 수 있는 가능성을 제시합니다. [2] 다양한 재료로 조각을 만들 수 있는 다양한 유형의 적층 기술이 있습니다. [3] 이 기사는 적층 기술의 방법으로 부품을 제조하기 위해 VKNA-25 등급 합금을 함유하는 주조 단결정 레늄을 기반으로 한 금속간 니켈 합금 조성에 대한 연구 결과를 제시합니다. [4] 외국 경험에 대한 연구는 적층 기술을 생산 관행에 도입하는 것과 관련이 있음을 확인했습니다. [5] 이 기사는 적층 기술을 포함한 혁신적인 프로세스 분야에서 국제 협력을 특징짓는 최신 동향 및 통계 지표에 대한 분석을 제공합니다. [6] 새롭게 부상하는 사물 인터넷(IoT) 패러다임은 제조 부품의 낭비와 비용을 크게 줄일 수 있는 적층 기술을 중심으로 제조 공정의 지속적인 혁신에 대한 압력을 유지합니다. [7] 장점과 단점을 결정하기 위해 적층 기술에 사용되는 운동학의 비교가 수행됩니다. [8] 이것은 감산 및 적층 기술(하이브리드 제조)의 조합을 통해 이미 제조된 부품의 기능화를 위한 새로운 가능성을 제공합니다. [9] 적층 기술의 잠재적인 응용 중 하나는 복잡한 기하학적 구조를 가진 다공성 구조의 생산이며, 인쇄는 젤과 같은 재료를 사용하여 수행됩니다. [10] Subtractive 방식으로 제작된 Bridge 보철물의 프레임은 Additive 기술을 사용하여 얻은 프레임에 비해 치수 정확도가 더 높습니다. [11] 이러한 목적을 위해 적층 기술을 사용하는 것이 훨씬 더 유망합니다. [12] 선택한 재료는 사출 성형, 특히 적층 기술로 만든 제품 생산을 위한 것입니다. [13] 적층 기술은 현대 생산에서 가장 빠르게 발전하는 분야 중 하나입니다. [14] 이용 가능한 문헌에는 이 문제를 해결하기 위한 두 가지 접근 방식이 있습니다. 여기에는 턱을 혈관화된 골 이식편으로 교체하는 방법이 있습니다. 그 중 비골 피판이 가장 유망합니다. 첨가제 기술을 사용하여 만든 관내인공삽입물은 가장 진보된 기술입니다. [15] 제안된 메커니즘은 자동화, 로봇화 및 인공 지능의 발전으로 인한 적층 기술을 포함하여 산업 기업의 많은 활동 영역에 적용될 수 있습니다. [16] 마찰 수정 첨가제 기술은 윤활 마찰 시스템의 마찰과 마모를 제어하는 데 중요한 역할을 합니다. [17] 첨가제 기술(AT)을 사용하여 얻은 물체의 미세 구조의 일반적인 결함과 미세 구조를 개선하고 기계적 특성을 증가시키기 위한 분말 합금 가공의 표준 방법(Hot Isostatic Pressing(HIP), 열처리(HT))의 적용 효율성을 고려합니다. . [18] 이 작업에서는 적층 기술을 사용하여 반제품 및 완제품 생산의 다양한 단계에서 내열 니켈 합금의 화학적 조성을 결정하는 문제를 고려합니다. [19] 적층 기술, 새로운 주조, 분말 야금, 용접, 표면 처리 기술을 포함하여 구조 및 기능 응용을 위한 금속 및 비금속 재료를 얻고 처리하는 고급 방법. [20] COVID-19는 2019년 12월부터 전 세계적인 대유행을 일으켰습니다. 인류 사회의 웰빙뿐만 아니라 세계 경제에도 피해를 입혔습니다. 이는 기업에 심각한 위협과 도전을 가했습니다. 영국 정부는 새로운 전염병에 대처하기 위한 구호 계획을 시작했습니다 팬데믹의 결과로 개발된 시나리오 이 문서는 COVID-19가 영국의 파운드리에 미치는 영향을 평가하는 것을 목표로 합니다. 영국 파운드리를 대상으로 한 자세한 설문조사에서 녹음된 응답을 분석하고 파운드리의 장단기 실행 계획을 제안합니다. 영국 파운드리의 현재 상태, 과제 및 미래 방향이 논의됩니다. 분산된 파운드리를 위한 비즈니스 모델 혁신과 함께 적층 기술 사용에 대한 의견이 제시됩니다. © 2021, The Minerals, Metals & Materials Society. [21] 한편, 이종재료층의 열물리적 특성의 차이는 잔류응력을 유발하여 이러한 바이메탈 접합부의 표면처리 또는 적층공법을 통해 변형 및 파괴를 유발한다. [22] 적층 기술은 이제 임상 의학의 다양한 분야에서 널리 사용됩니다. [23] 적층 기술로 생산되는 부품 생산을 위한 기술적 준비의 효율성을 높이기 위해 이미 설계 솔루션 단계에서 시뮬레이션 및 최적화 프로세스의 중요성이 커지고 있습니다. [24] 적층 기술 개발의 현대적인 경향은 재료를 절약하고 새로운 재료를 도입하며 결과 제품의 물리적 및 기계적 특성을 개선하는 것을 목표로 합니다. [25] 이 문서의 맥락에서 세 가지 추가 기술은 다양한 개조 응용 프로그램의 배경에 대한 적용 가능성과 관련하여 평가됩니다. [26] 글리콜라이드 및 락타이드 기반 폴리머는 모두 의약, 제약, 식품 산업 및 첨가제 기술에서 널리 사용됩니다. [27] 작업의 일환으로 분말의 입자 모양, 입자 크기 분포 및 기술적 특성을 조사하고 재료가 첨가제 기술(SLM) 요구 사항을 준수하는지 확인했습니다. [28] 이 문서에서는 적층 기술을 사용하여 부품 프로토타입을 제조하는 동안 기능적 복셀 모델의 매개변수를 제어하는 원리에 대해 설명합니다. [29] 러시아 연방의 첨가제 기술 개발은 금속 분말 생산을 위한 토착 기반 부족으로 인해 제약을 받고 있습니다. [30] 제너레이티브 디자인은 적층 기술과 인공 지능을 포함한 교차 디지털 기술과 함께 작동하는 정보 기술로 간주됩니다. [31] 첨가제 기술의 발전을 위해서는 사용되는 재료의 범위를 확장하는 것이 필요합니다. [32] 이 작업은 특정 프로세스에 초점을 맞추고 있지만 방법론과 결과는 미래의 변형 가공 기반 적층 기술을 개발하기 위한 기초를 제공할 수 있습니다. [33] 그들은 추가 기술을 사용하여 환자의 골반 전방 반 고리의 해부학 적 및 기능적 구조에 따라 개별적으로 만들어집니다. [34] 오늘날 세라믹을 사용한 3D 프린팅은 적층 기술 개발의 유망한 방향입니다. [35] 발표된 논문은 사이버 물리 시스템, IoT(스마트 홈, 스마트 시티), 로봇 공학, 메카트로닉스, 인공 지능, 빅 데이터 작업을 위한 시스템(빅 데이터, 데이터 마이닝, 블록체인), 컴퓨터 비전과 같은 광범위한 영역을 다룹니다. 및 시각화 시스템, 추가 기술, 데이터 마이닝의 근본적인 문제. [36] 이 리뷰는 자원이 부족하고 중력이 낮은 조건에서 달 표면에서 복잡한 기술 항목을 제조하기 위한 적층 기술의 개발 전망에 대해 논의합니다. [37] 적층 기술은 3D 프린팅 평면에 대한 프로토타입 배치 또는 폴리머 재료 처리 방법을 포함하여 테스트된 기계 구성 요소의 비틀림 강도에 분명한 영향을 미치는 것으로 나타났습니다. [38] 20μm 분율의 분말은 유동성이 없어 첨가제 기술에 사용할 수 없습니다. [39] 부품 생산을 위한 적층 기술의 사용은 최근 산업 생산 분야의 주요 추세 중 하나입니다. [40] 결과적으로 이 연구의 목적은 적층 기술의 도움으로 제조된 부품의 표면 품질 향상을 위한 기술의 개발이었습니다. [41] 새로운 3D 프린팅 첨가제 기술을 통해 환자별 원뿔을 개발할 수 있습니다. [42] 이 기사는 VT6 티타늄 합금으로 생산되고 적층 기술(АТ)을 사용하여 성장한 비표준 단면 형상의 대형 링의 열간 압연 측면을 조사합니다. [43] 현대 산업에서 생산 속도가 지속적으로 증가함에 따라 적층 기술은 전통적인 단일 및 소규모 생산에 대한 강력한 대안이 되고 있습니다. [44] 프로토타입에서 제조에 이르는 적층 기술의 확산으로 신제품 개발이 가능해졌지만 특성화를 위해서는 여전히 효과적인 방법이 필요합니다. [45] 그러나 추가 기술의 사용에는 한계가 있으며 이러한 기술이 제공하는 기회를 최대한 활용하려면 적법한 기능 시스템을 만들고 위기 관리를 지원하는 적절한 구조에 포함시켜야 합니다. [46] 연구의 관련성은 항공 및 자동차 산업에서 얇은 벽 제품의 제조에 중요한 실용적인 의미를 갖는 최적의 모양의 플라스틱에서 스탬핑 도구를 생산할 가능성과 적층 기술의 적극적인 개발로 인한 것입니다. [47] 얻어진 결과는 부가 기술과 3D 프린팅을 사용하여 이 병리를 치료하기 위한 맞춤형 맞춤형 알고리즘의 적용을 위한 기초입니다. [48] 적층 기술(AT) 또는 계층 합성 기술은 "디지털" 생산에서 가장 역동적으로 발전하는 영역 중 하나입니다. [49] 두개 성형술에서 적층 기술의 혁신적인 적용 중 하나는 개별 3D 인쇄 모델을 기반으로 미리 형성된 임플란트를 만드는 것입니다. [50]
Printing Additive Technologies 인쇄 첨가제 기술
New 3D-printing additive technologies allow to develop patient-specific cones. [1] The PMSG is manufactured from light and durable materials using layer-by-layer synthesis based on 3D printing additive technologies. [2]새로운 3D 프린팅 첨가제 기술을 통해 환자별 원뿔을 개발할 수 있습니다. [1] PMSG는 3D 프린팅 첨가제 기술을 기반으로 하는 레이어별 합성을 사용하여 가볍고 내구성 있는 재료로 제조됩니다. [2]
Applying Additive Technologies 적층 기술 적용
Challenges that need to be addressed in applying additive technologies in MEMS include ceramic printing on wafers, post-processing at the micro-level, resolution, and quality control. [1] The survey was conducted on a group of 100 enterprises and scientific research institutes in Poland, offering and/or applying additive technologies. [2]MEMS에 적층 기술을 적용할 때 해결해야 하는 과제에는 웨이퍼의 세라믹 인쇄, 마이크로 수준의 후처리, 해상도 및 품질 관리가 포함됩니다. [1] 설문 조사는 100개 기업 및 폴란드의 과학 연구 기관 그룹을 대상으로 하여 적층 기술을 제공 및/또는 적용했습니다. [2]
additive technologies open
Additive technologies open up new possibilities for creating materials with controlled structural features including ceramic composites. [1] Use of 3D laser scanning in combination with computer modelling and use of CNC milling machines and additive technologies open new perspective in Cultural Heritage preservation. [2]적층 기술은 세라믹 복합 재료를 포함하여 제어된 구조적 특징을 가진 재료를 생성할 수 있는 새로운 가능성을 열어줍니다. [1] nan [2]